From: <gregkh@linuxfoundation.org>
To: axfo@kvaser.com,extja@kvaser.com,mkl@pengutronix.de
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] can: kvaser_pciefd: Force IRQ edge in case of nested IRQ" failed to apply to 6.6-stable tree
Date: Sat, 24 May 2025 17:48:30 +0200 [thread overview]
Message-ID: <2025052430-customary-paramount-b71a@gregkh> (raw)
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 9176bd205ee0b2cd35073a9973c2a0936bcb579e
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2025052430-customary-paramount-b71a@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 9176bd205ee0b2cd35073a9973c2a0936bcb579e Mon Sep 17 00:00:00 2001
From: Axel Forsman <axfo@kvaser.com>
Date: Tue, 20 May 2025 13:43:30 +0200
Subject: [PATCH] can: kvaser_pciefd: Force IRQ edge in case of nested IRQ
Avoid the driver missing IRQs by temporarily masking IRQs in the ISR
to enforce an edge even if a different IRQ is signalled before handled
IRQs are cleared.
Fixes: 48f827d4f48f ("can: kvaser_pciefd: Move reset of DMA RX buffers to the end of the ISR")
Cc: stable@vger.kernel.org
Signed-off-by: Axel Forsman <axfo@kvaser.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20250520114332.8961-2-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c
index cf0d51805272..9cc9176c2058 100644
--- a/drivers/net/can/kvaser_pciefd.c
+++ b/drivers/net/can/kvaser_pciefd.c
@@ -1646,24 +1646,28 @@ static int kvaser_pciefd_read_buffer(struct kvaser_pciefd *pcie, int dma_buf)
return res;
}
-static u32 kvaser_pciefd_receive_irq(struct kvaser_pciefd *pcie)
+static void kvaser_pciefd_receive_irq(struct kvaser_pciefd *pcie)
{
+ void __iomem *srb_cmd_reg = KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CMD_REG;
u32 irq = ioread32(KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IRQ_REG);
- if (irq & KVASER_PCIEFD_SRB_IRQ_DPD0)
- kvaser_pciefd_read_buffer(pcie, 0);
+ iowrite32(irq, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IRQ_REG);
- if (irq & KVASER_PCIEFD_SRB_IRQ_DPD1)
+ if (irq & KVASER_PCIEFD_SRB_IRQ_DPD0) {
+ kvaser_pciefd_read_buffer(pcie, 0);
+ iowrite32(KVASER_PCIEFD_SRB_CMD_RDB0, srb_cmd_reg); /* Rearm buffer */
+ }
+
+ if (irq & KVASER_PCIEFD_SRB_IRQ_DPD1) {
kvaser_pciefd_read_buffer(pcie, 1);
+ iowrite32(KVASER_PCIEFD_SRB_CMD_RDB1, srb_cmd_reg); /* Rearm buffer */
+ }
if (unlikely(irq & KVASER_PCIEFD_SRB_IRQ_DOF0 ||
irq & KVASER_PCIEFD_SRB_IRQ_DOF1 ||
irq & KVASER_PCIEFD_SRB_IRQ_DUF0 ||
irq & KVASER_PCIEFD_SRB_IRQ_DUF1))
dev_err(&pcie->pci->dev, "DMA IRQ error 0x%08X\n", irq);
-
- iowrite32(irq, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IRQ_REG);
- return irq;
}
static void kvaser_pciefd_transmit_irq(struct kvaser_pciefd_can *can)
@@ -1691,29 +1695,22 @@ static irqreturn_t kvaser_pciefd_irq_handler(int irq, void *dev)
struct kvaser_pciefd *pcie = (struct kvaser_pciefd *)dev;
const struct kvaser_pciefd_irq_mask *irq_mask = pcie->driver_data->irq_mask;
u32 pci_irq = ioread32(KVASER_PCIEFD_PCI_IRQ_ADDR(pcie));
- u32 srb_irq = 0;
- u32 srb_release = 0;
int i;
if (!(pci_irq & irq_mask->all))
return IRQ_NONE;
+ iowrite32(0, KVASER_PCIEFD_PCI_IEN_ADDR(pcie));
+
if (pci_irq & irq_mask->kcan_rx0)
- srb_irq = kvaser_pciefd_receive_irq(pcie);
+ kvaser_pciefd_receive_irq(pcie);
for (i = 0; i < pcie->nr_channels; i++) {
if (pci_irq & irq_mask->kcan_tx[i])
kvaser_pciefd_transmit_irq(pcie->can[i]);
}
- if (srb_irq & KVASER_PCIEFD_SRB_IRQ_DPD0)
- srb_release |= KVASER_PCIEFD_SRB_CMD_RDB0;
-
- if (srb_irq & KVASER_PCIEFD_SRB_IRQ_DPD1)
- srb_release |= KVASER_PCIEFD_SRB_CMD_RDB1;
-
- if (srb_release)
- iowrite32(srb_release, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CMD_REG);
+ iowrite32(irq_mask->all, KVASER_PCIEFD_PCI_IEN_ADDR(pcie));
return IRQ_HANDLED;
}
@@ -1733,13 +1730,22 @@ static void kvaser_pciefd_teardown_can_ctrls(struct kvaser_pciefd *pcie)
}
}
+static void kvaser_pciefd_disable_irq_srcs(struct kvaser_pciefd *pcie)
+{
+ unsigned int i;
+
+ /* Masking PCI_IRQ is insufficient as running ISR will unmask it */
+ iowrite32(0, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IEN_REG);
+ for (i = 0; i < pcie->nr_channels; ++i)
+ iowrite32(0, pcie->can[i]->reg_base + KVASER_PCIEFD_KCAN_IEN_REG);
+}
+
static int kvaser_pciefd_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
int ret;
struct kvaser_pciefd *pcie;
const struct kvaser_pciefd_irq_mask *irq_mask;
- void __iomem *irq_en_base;
pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL);
if (!pcie)
@@ -1805,8 +1811,7 @@ static int kvaser_pciefd_probe(struct pci_dev *pdev,
KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IEN_REG);
/* Enable PCI interrupts */
- irq_en_base = KVASER_PCIEFD_PCI_IEN_ADDR(pcie);
- iowrite32(irq_mask->all, irq_en_base);
+ iowrite32(irq_mask->all, KVASER_PCIEFD_PCI_IEN_ADDR(pcie));
/* Ready the DMA buffers */
iowrite32(KVASER_PCIEFD_SRB_CMD_RDB0,
KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CMD_REG);
@@ -1820,8 +1825,7 @@ static int kvaser_pciefd_probe(struct pci_dev *pdev,
return 0;
err_free_irq:
- /* Disable PCI interrupts */
- iowrite32(0, irq_en_base);
+ kvaser_pciefd_disable_irq_srcs(pcie);
free_irq(pcie->pci->irq, pcie);
err_pci_free_irq_vectors:
@@ -1844,35 +1848,26 @@ static int kvaser_pciefd_probe(struct pci_dev *pdev,
return ret;
}
-static void kvaser_pciefd_remove_all_ctrls(struct kvaser_pciefd *pcie)
-{
- int i;
-
- for (i = 0; i < pcie->nr_channels; i++) {
- struct kvaser_pciefd_can *can = pcie->can[i];
-
- if (can) {
- iowrite32(0, can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG);
- unregister_candev(can->can.dev);
- timer_delete(&can->bec_poll_timer);
- kvaser_pciefd_pwm_stop(can);
- free_candev(can->can.dev);
- }
- }
-}
-
static void kvaser_pciefd_remove(struct pci_dev *pdev)
{
struct kvaser_pciefd *pcie = pci_get_drvdata(pdev);
+ unsigned int i;
- kvaser_pciefd_remove_all_ctrls(pcie);
+ for (i = 0; i < pcie->nr_channels; ++i) {
+ struct kvaser_pciefd_can *can = pcie->can[i];
- /* Disable interrupts */
- iowrite32(0, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CTRL_REG);
- iowrite32(0, KVASER_PCIEFD_PCI_IEN_ADDR(pcie));
+ unregister_candev(can->can.dev);
+ timer_delete(&can->bec_poll_timer);
+ kvaser_pciefd_pwm_stop(can);
+ }
+ kvaser_pciefd_disable_irq_srcs(pcie);
free_irq(pcie->pci->irq, pcie);
pci_free_irq_vectors(pcie->pci);
+
+ for (i = 0; i < pcie->nr_channels; ++i)
+ free_candev(pcie->can[i]->can.dev);
+
pci_iounmap(pdev, pcie->reg_base);
pci_release_regions(pdev);
pci_disable_device(pdev);
next reply other threads:[~2025-05-24 15:48 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-24 15:48 gregkh [this message]
2025-05-28 10:08 ` [PATCH 6.6.y] can: kvaser_pciefd: Force IRQ edge in case of nested IRQ Axel Forsman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2025052430-customary-paramount-b71a@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=axfo@kvaser.com \
--cc=extja@kvaser.com \
--cc=mkl@pengutronix.de \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox