* [PATCH 6.15 01/49] arm64: dts: socfpga: agilex5: fix gpio0 address
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
@ 2025-06-02 13:46 ` Greg Kroah-Hartman
2025-06-02 13:46 ` [PATCH 6.15 02/49] arm64: dts: rockchip: fix internal USB hub instability on RK3399 Puma Greg Kroah-Hartman
` (56 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:46 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Niravkumar L Rabara,
Krzysztof Kozlowski, Dinh Nguyen
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
commit a6c9896e65e555d679a4bc71c3cdfce6df4b2343 upstream.
Use the correct gpio0 address for Agilex5.
Fixes: 3f7c869e143a ("arm64: dts: socfpga: agilex5: Add gpio0 node and spi dma handshake id")
Cc: stable@vger.kernel.org
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
@@ -222,9 +222,9 @@
status = "disabled";
};
- gpio0: gpio@ffc03200 {
+ gpio0: gpio@10c03200 {
compatible = "snps,dw-apb-gpio";
- reg = <0xffc03200 0x100>;
+ reg = <0x10c03200 0x100>;
#address-cells = <1>;
#size-cells = <0>;
resets = <&rst GPIO0_RESET>;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 02/49] arm64: dts: rockchip: fix internal USB hub instability on RK3399 Puma
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
2025-06-02 13:46 ` [PATCH 6.15 01/49] arm64: dts: socfpga: agilex5: fix gpio0 address Greg Kroah-Hartman
@ 2025-06-02 13:46 ` Greg Kroah-Hartman
2025-06-02 13:46 ` [PATCH 6.15 03/49] arm64: dts: rockchip: Add missing SFC power-domains to rk3576 Greg Kroah-Hartman
` (55 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:46 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Lukasz Czechowski, Heiko Stuebner
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
commit d7cc532df95f7f159e40595440e4e4b99481457b upstream.
Currently, the onboard Cypress CYUSB3304 USB hub is not defined in
the device tree, and hub reset pin is provided as vcc5v0_host
regulator to usb phy. This causes instability issues, as a result
of improper reset duration.
The fixed regulator device requests the GPIO during probe in its
inactive state (except if regulator-boot-on property is set, in
which case it is requested in the active state). Considering gpio
is GPIO_ACTIVE_LOW for Puma, it means it’s driving it high. Then
the regulator gets enabled (because regulator-always-on property),
which drives it to its active state, meaning driving it low.
The Cypress CYUSB3304 USB hub actually requires the reset to be
asserted for at least 5 ms, which we cannot guarantee right now
since there's no delay in the current config, meaning the hub may
sometimes work or not. We could add delay as offered by
fixed-regulator but let's rather fix this by using the proper way
to model onboard USB hubs.
Define hub_2_0 and hub_3_0 nodes, as the onboard Cypress hub
consist of two 'logical' hubs, for USB2.0 and USB3.0.
Use the 'reset-gpios' property of hub to assign reset pin instead
of using regulator. Rename the vcc5v0_host regulator to
cy3304_reset to be more meaningful. Pin is configured to
output-high by default, which sets the hub in reset state
during pin controller initialization. This allows to avoid double
enumeration of devices in case the bootloader has setup the USB
hub before the kernel.
The vdd-supply and vdd2-supply properties in hub nodes are
added to provide correct dt-bindings, although power supplies are
always enabled based on HW design.
Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Cc: stable@vger.kernel.org # 6.6
Cc: stable@vger.kernel.org # Backport of the patch in this series fixing product ID in onboard_dev_id_table in drivers/usb/misc/onboard_usb_dev.c driver
Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
Link: https://lore.kernel.org/r/20250425-onboard_usb_dev-v2-3-4a76a474a010@thaumatec.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 40 ++++++++++++++++----------
1 file changed, 26 insertions(+), 14 deletions(-)
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -60,16 +60,6 @@
vin-supply = <&vcc5v0_sys>;
};
- vcc5v0_host: regulator-vcc5v0-host {
- compatible = "regulator-fixed";
- gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host_en>;
- regulator-name = "vcc5v0_host";
- regulator-always-on;
- vin-supply = <&vcc5v0_sys>;
- };
-
vcc5v0_sys: regulator-vcc5v0-sys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
@@ -527,10 +517,10 @@
};
};
- usb2 {
- vcc5v0_host_en: vcc5v0-host-en {
+ usb {
+ cy3304_reset: cy3304-reset {
rockchip,pins =
- <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ <4 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>;
};
};
@@ -597,7 +587,6 @@
};
u2phy1_host: host-port {
- phy-supply = <&vcc5v0_host>;
status = "okay";
};
};
@@ -609,6 +598,29 @@
&usbdrd_dwc3_1 {
status = "okay";
dr_mode = "host";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cy3304_reset>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub_2_0: hub@1 {
+ compatible = "usb4b4,6502", "usb4b4,6506";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+ vdd-supply = <&vcc1v2_phy>;
+ vdd2-supply = <&vcc3v3_sys>;
+
+ };
+
+ hub_3_0: hub@2 {
+ compatible = "usb4b4,6500", "usb4b4,6504";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+ vdd-supply = <&vcc1v2_phy>;
+ vdd2-supply = <&vcc3v3_sys>;
+ };
};
&usb_host1_ehci {
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 03/49] arm64: dts: rockchip: Add missing SFC power-domains to rk3576
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
2025-06-02 13:46 ` [PATCH 6.15 01/49] arm64: dts: socfpga: agilex5: fix gpio0 address Greg Kroah-Hartman
2025-06-02 13:46 ` [PATCH 6.15 02/49] arm64: dts: rockchip: fix internal USB hub instability on RK3399 Puma Greg Kroah-Hartman
@ 2025-06-02 13:46 ` Greg Kroah-Hartman
2025-06-02 13:46 ` [PATCH 6.15 04/49] arm64: dts: qcom: ipq9574: Add missing properties for cryptobam Greg Kroah-Hartman
` (54 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:46 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Sebastian Reichel, Heiko Stuebner
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sebastian Reichel <sebastian.reichel@collabora.com>
commit ede1fa1384c230c9823f6bf1849cf50c5fc8a83e upstream.
Add the power-domains for the RK3576 SFC nodes according to the
TRM part 1. This fixes potential SErrors when accessing the SFC
registers without other peripherals (e.g. eMMC) doing a prior
power-domain enable. For example this is easy to trigger on the
Rock 4D, which enables the SFC0 interface, but does not enable
the eMMC interface at the moment.
Cc: stable@vger.kernel.org
Fixes: 36299757129c8 ("arm64: dts: rockchip: Add SFC nodes for rk3576")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250520-rk3576-fix-fspi-pmdomain-v1-1-f07c6e62dadd@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/rockchip/rk3576.dtsi | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
@@ -1364,6 +1364,7 @@
interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_FSPI1_X2>, <&cru HCLK_FSPI1>;
clock-names = "clk_sfc", "hclk_sfc";
+ power-domains = <&power RK3576_PD_SDGMAC>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1414,6 +1415,7 @@
interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_FSPI_X2>, <&cru HCLK_FSPI>;
clock-names = "clk_sfc", "hclk_sfc";
+ power-domains = <&power RK3576_PD_NVM>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 04/49] arm64: dts: qcom: ipq9574: Add missing properties for cryptobam
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (2 preceding siblings ...)
2025-06-02 13:46 ` [PATCH 6.15 03/49] arm64: dts: rockchip: Add missing SFC power-domains to rk3576 Greg Kroah-Hartman
@ 2025-06-02 13:46 ` Greg Kroah-Hartman
2025-06-02 13:46 ` [PATCH 6.15 05/49] arm64: dts: qcom: sa8775p: " Greg Kroah-Hartman
` (53 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:46 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Md Sadre Alam, Stephan Gerhold,
Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephan Gerhold <stephan.gerhold@linaro.org>
commit b4cd966edb2deb5c75fe356191422e127445b830 upstream.
num-channels and qcom,num-ees are required for BAM nodes without clock,
because the driver cannot ensure the hardware is powered on when trying to
obtain the information from the hardware registers. Specifying the node
without these properties is unsafe and has caused early boot crashes for
other SoCs before [1, 2].
Add the missing information from the hardware registers to ensure the
driver can probe successfully without causing crashes.
[1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/
[2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/
Cc: stable@vger.kernel.org
Tested-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Fixes: ffadc79ed99f ("arm64: dts: qcom: ipq9574: Enable crypto nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250212-bam-dma-fixes-v1-6-f560889e65d8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -378,6 +378,8 @@
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
qcom,ee = <1>;
+ qcom,num-ees = <4>;
+ num-channels = <16>;
qcom,controlled-remotely;
};
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 05/49] arm64: dts: qcom: sa8775p: Add missing properties for cryptobam
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (3 preceding siblings ...)
2025-06-02 13:46 ` [PATCH 6.15 04/49] arm64: dts: qcom: ipq9574: Add missing properties for cryptobam Greg Kroah-Hartman
@ 2025-06-02 13:46 ` Greg Kroah-Hartman
2025-06-02 13:46 ` [PATCH 6.15 06/49] arm64: dts: qcom: sa8775p: Remove extra entries from the iommus property Greg Kroah-Hartman
` (52 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:46 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Stephan Gerhold, Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephan Gerhold <stephan.gerhold@linaro.org>
commit a2517331f11bd22cded60e791a8818cec3e7597a upstream.
num-channels and qcom,num-ees are required for BAM nodes without clock,
because the driver cannot ensure the hardware is powered on when trying to
obtain the information from the hardware registers. Specifying the node
without these properties is unsafe and has caused early boot crashes for
other SoCs before [1, 2].
Add the missing information from the hardware registers to ensure the
driver can probe successfully without causing crashes.
[1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/
[2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/
Cc: stable@vger.kernel.org
Fixes: 7ff3da43ef44 ("arm64: dts: qcom: sa8775p: add QCrypto nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250212-bam-dma-fixes-v1-5-f560889e65d8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -2413,6 +2413,8 @@
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
qcom,ee = <0>;
+ qcom,num-ees = <4>;
+ num-channels = <20>;
qcom,controlled-remotely;
iommus = <&apps_smmu 0x480 0x00>,
<&apps_smmu 0x481 0x00>;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 06/49] arm64: dts: qcom: sa8775p: Remove extra entries from the iommus property
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (4 preceding siblings ...)
2025-06-02 13:46 ` [PATCH 6.15 05/49] arm64: dts: qcom: sa8775p: " Greg Kroah-Hartman
@ 2025-06-02 13:46 ` Greg Kroah-Hartman
2025-06-02 13:46 ` [PATCH 6.15 07/49] arm64: dts: qcom: sa8775p: Remove cdsp compute-cb@10 Greg Kroah-Hartman
` (51 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:46 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, stable, Dmitry Baryshkov, Ling Xu,
Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ling Xu <quic_lxu5@quicinc.com>
commit eb73f500548a3205741330cbd7d0e209a7a6a9af upstream.
There are some items come out to be same value if we do SID & ~MASK.
Remove extra entries from the iommus property for sa8775p to simplify.
Fixes: f7b01bfb4b47 ("arm64: qcom: sa8775p: Add ADSP and CDSP0 fastrpc nodes")
Cc: stable@kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
Link: https://lore.kernel.org/r/49f463415c8fa2b08fbc2317e31493362056f403.1739260973.git.quic_lxu5@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 240 +++-------------------------------
1 file changed, 24 insertions(+), 216 deletions(-)
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -4905,15 +4905,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <1>;
iommus = <&apps_smmu 0x2141 0x04a0>,
- <&apps_smmu 0x2161 0x04a0>,
- <&apps_smmu 0x2181 0x0400>,
- <&apps_smmu 0x21c1 0x04a0>,
- <&apps_smmu 0x21e1 0x04a0>,
- <&apps_smmu 0x2541 0x04a0>,
- <&apps_smmu 0x2561 0x04a0>,
- <&apps_smmu 0x2581 0x0400>,
- <&apps_smmu 0x25c1 0x04a0>,
- <&apps_smmu 0x25e1 0x04a0>;
+ <&apps_smmu 0x2181 0x0400>;
dma-coherent;
};
@@ -4921,15 +4913,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <2>;
iommus = <&apps_smmu 0x2142 0x04a0>,
- <&apps_smmu 0x2162 0x04a0>,
- <&apps_smmu 0x2182 0x0400>,
- <&apps_smmu 0x21c2 0x04a0>,
- <&apps_smmu 0x21e2 0x04a0>,
- <&apps_smmu 0x2542 0x04a0>,
- <&apps_smmu 0x2562 0x04a0>,
- <&apps_smmu 0x2582 0x0400>,
- <&apps_smmu 0x25c2 0x04a0>,
- <&apps_smmu 0x25e2 0x04a0>;
+ <&apps_smmu 0x2182 0x0400>;
dma-coherent;
};
@@ -4937,15 +4921,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <3>;
iommus = <&apps_smmu 0x2143 0x04a0>,
- <&apps_smmu 0x2163 0x04a0>,
- <&apps_smmu 0x2183 0x0400>,
- <&apps_smmu 0x21c3 0x04a0>,
- <&apps_smmu 0x21e3 0x04a0>,
- <&apps_smmu 0x2543 0x04a0>,
- <&apps_smmu 0x2563 0x04a0>,
- <&apps_smmu 0x2583 0x0400>,
- <&apps_smmu 0x25c3 0x04a0>,
- <&apps_smmu 0x25e3 0x04a0>;
+ <&apps_smmu 0x2183 0x0400>;
dma-coherent;
};
@@ -4953,15 +4929,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <4>;
iommus = <&apps_smmu 0x2144 0x04a0>,
- <&apps_smmu 0x2164 0x04a0>,
- <&apps_smmu 0x2184 0x0400>,
- <&apps_smmu 0x21c4 0x04a0>,
- <&apps_smmu 0x21e4 0x04a0>,
- <&apps_smmu 0x2544 0x04a0>,
- <&apps_smmu 0x2564 0x04a0>,
- <&apps_smmu 0x2584 0x0400>,
- <&apps_smmu 0x25c4 0x04a0>,
- <&apps_smmu 0x25e4 0x04a0>;
+ <&apps_smmu 0x2184 0x0400>;
dma-coherent;
};
@@ -4969,15 +4937,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <5>;
iommus = <&apps_smmu 0x2145 0x04a0>,
- <&apps_smmu 0x2165 0x04a0>,
- <&apps_smmu 0x2185 0x0400>,
- <&apps_smmu 0x21c5 0x04a0>,
- <&apps_smmu 0x21e5 0x04a0>,
- <&apps_smmu 0x2545 0x04a0>,
- <&apps_smmu 0x2565 0x04a0>,
- <&apps_smmu 0x2585 0x0400>,
- <&apps_smmu 0x25c5 0x04a0>,
- <&apps_smmu 0x25e5 0x04a0>;
+ <&apps_smmu 0x2185 0x0400>;
dma-coherent;
};
@@ -4985,15 +4945,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <6>;
iommus = <&apps_smmu 0x2146 0x04a0>,
- <&apps_smmu 0x2166 0x04a0>,
- <&apps_smmu 0x2186 0x0400>,
- <&apps_smmu 0x21c6 0x04a0>,
- <&apps_smmu 0x21e6 0x04a0>,
- <&apps_smmu 0x2546 0x04a0>,
- <&apps_smmu 0x2566 0x04a0>,
- <&apps_smmu 0x2586 0x0400>,
- <&apps_smmu 0x25c6 0x04a0>,
- <&apps_smmu 0x25e6 0x04a0>;
+ <&apps_smmu 0x2186 0x0400>;
dma-coherent;
};
@@ -5001,15 +4953,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <7>;
iommus = <&apps_smmu 0x2147 0x04a0>,
- <&apps_smmu 0x2167 0x04a0>,
- <&apps_smmu 0x2187 0x0400>,
- <&apps_smmu 0x21c7 0x04a0>,
- <&apps_smmu 0x21e7 0x04a0>,
- <&apps_smmu 0x2547 0x04a0>,
- <&apps_smmu 0x2567 0x04a0>,
- <&apps_smmu 0x2587 0x0400>,
- <&apps_smmu 0x25c7 0x04a0>,
- <&apps_smmu 0x25e7 0x04a0>;
+ <&apps_smmu 0x2187 0x0400>;
dma-coherent;
};
@@ -5017,15 +4961,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <8>;
iommus = <&apps_smmu 0x2148 0x04a0>,
- <&apps_smmu 0x2168 0x04a0>,
- <&apps_smmu 0x2188 0x0400>,
- <&apps_smmu 0x21c8 0x04a0>,
- <&apps_smmu 0x21e8 0x04a0>,
- <&apps_smmu 0x2548 0x04a0>,
- <&apps_smmu 0x2568 0x04a0>,
- <&apps_smmu 0x2588 0x0400>,
- <&apps_smmu 0x25c8 0x04a0>,
- <&apps_smmu 0x25e8 0x04a0>;
+ <&apps_smmu 0x2188 0x0400>;
dma-coherent;
};
@@ -5033,15 +4969,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <9>;
iommus = <&apps_smmu 0x2149 0x04a0>,
- <&apps_smmu 0x2169 0x04a0>,
- <&apps_smmu 0x2189 0x0400>,
- <&apps_smmu 0x21c9 0x04a0>,
- <&apps_smmu 0x21e9 0x04a0>,
- <&apps_smmu 0x2549 0x04a0>,
- <&apps_smmu 0x2569 0x04a0>,
- <&apps_smmu 0x2589 0x0400>,
- <&apps_smmu 0x25c9 0x04a0>,
- <&apps_smmu 0x25e9 0x04a0>;
+ <&apps_smmu 0x2189 0x0400>;
dma-coherent;
};
@@ -5049,15 +4977,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <10>;
iommus = <&apps_smmu 0x214a 0x04a0>,
- <&apps_smmu 0x216a 0x04a0>,
- <&apps_smmu 0x218a 0x0400>,
- <&apps_smmu 0x21ca 0x04a0>,
- <&apps_smmu 0x21ea 0x04a0>,
- <&apps_smmu 0x254a 0x04a0>,
- <&apps_smmu 0x256a 0x04a0>,
- <&apps_smmu 0x258a 0x0400>,
- <&apps_smmu 0x25ca 0x04a0>,
- <&apps_smmu 0x25ea 0x04a0>;
+ <&apps_smmu 0x218a 0x0400>;
dma-coherent;
};
@@ -5065,15 +4985,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <11>;
iommus = <&apps_smmu 0x214b 0x04a0>,
- <&apps_smmu 0x216b 0x04a0>,
- <&apps_smmu 0x218b 0x0400>,
- <&apps_smmu 0x21cb 0x04a0>,
- <&apps_smmu 0x21eb 0x04a0>,
- <&apps_smmu 0x254b 0x04a0>,
- <&apps_smmu 0x256b 0x04a0>,
- <&apps_smmu 0x258b 0x0400>,
- <&apps_smmu 0x25cb 0x04a0>,
- <&apps_smmu 0x25eb 0x04a0>;
+ <&apps_smmu 0x218b 0x0400>;
dma-coherent;
};
};
@@ -5133,15 +5045,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <1>;
iommus = <&apps_smmu 0x2941 0x04a0>,
- <&apps_smmu 0x2961 0x04a0>,
- <&apps_smmu 0x2981 0x0400>,
- <&apps_smmu 0x29c1 0x04a0>,
- <&apps_smmu 0x29e1 0x04a0>,
- <&apps_smmu 0x2d41 0x04a0>,
- <&apps_smmu 0x2d61 0x04a0>,
- <&apps_smmu 0x2d81 0x0400>,
- <&apps_smmu 0x2dc1 0x04a0>,
- <&apps_smmu 0x2de1 0x04a0>;
+ <&apps_smmu 0x2981 0x0400>;
dma-coherent;
};
@@ -5149,15 +5053,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <2>;
iommus = <&apps_smmu 0x2942 0x04a0>,
- <&apps_smmu 0x2962 0x04a0>,
- <&apps_smmu 0x2982 0x0400>,
- <&apps_smmu 0x29c2 0x04a0>,
- <&apps_smmu 0x29e2 0x04a0>,
- <&apps_smmu 0x2d42 0x04a0>,
- <&apps_smmu 0x2d62 0x04a0>,
- <&apps_smmu 0x2d82 0x0400>,
- <&apps_smmu 0x2dc2 0x04a0>,
- <&apps_smmu 0x2de2 0x04a0>;
+ <&apps_smmu 0x2982 0x0400>;
dma-coherent;
};
@@ -5165,15 +5061,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <3>;
iommus = <&apps_smmu 0x2943 0x04a0>,
- <&apps_smmu 0x2963 0x04a0>,
- <&apps_smmu 0x2983 0x0400>,
- <&apps_smmu 0x29c3 0x04a0>,
- <&apps_smmu 0x29e3 0x04a0>,
- <&apps_smmu 0x2d43 0x04a0>,
- <&apps_smmu 0x2d63 0x04a0>,
- <&apps_smmu 0x2d83 0x0400>,
- <&apps_smmu 0x2dc3 0x04a0>,
- <&apps_smmu 0x2de3 0x04a0>;
+ <&apps_smmu 0x2983 0x0400>;
dma-coherent;
};
@@ -5181,15 +5069,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <4>;
iommus = <&apps_smmu 0x2944 0x04a0>,
- <&apps_smmu 0x2964 0x04a0>,
- <&apps_smmu 0x2984 0x0400>,
- <&apps_smmu 0x29c4 0x04a0>,
- <&apps_smmu 0x29e4 0x04a0>,
- <&apps_smmu 0x2d44 0x04a0>,
- <&apps_smmu 0x2d64 0x04a0>,
- <&apps_smmu 0x2d84 0x0400>,
- <&apps_smmu 0x2dc4 0x04a0>,
- <&apps_smmu 0x2de4 0x04a0>;
+ <&apps_smmu 0x2984 0x0400>;
dma-coherent;
};
@@ -5197,15 +5077,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <5>;
iommus = <&apps_smmu 0x2945 0x04a0>,
- <&apps_smmu 0x2965 0x04a0>,
- <&apps_smmu 0x2985 0x0400>,
- <&apps_smmu 0x29c5 0x04a0>,
- <&apps_smmu 0x29e5 0x04a0>,
- <&apps_smmu 0x2d45 0x04a0>,
- <&apps_smmu 0x2d65 0x04a0>,
- <&apps_smmu 0x2d85 0x0400>,
- <&apps_smmu 0x2dc5 0x04a0>,
- <&apps_smmu 0x2de5 0x04a0>;
+ <&apps_smmu 0x2985 0x0400>;
dma-coherent;
};
@@ -5213,15 +5085,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <6>;
iommus = <&apps_smmu 0x2946 0x04a0>,
- <&apps_smmu 0x2966 0x04a0>,
- <&apps_smmu 0x2986 0x0400>,
- <&apps_smmu 0x29c6 0x04a0>,
- <&apps_smmu 0x29e6 0x04a0>,
- <&apps_smmu 0x2d46 0x04a0>,
- <&apps_smmu 0x2d66 0x04a0>,
- <&apps_smmu 0x2d86 0x0400>,
- <&apps_smmu 0x2dc6 0x04a0>,
- <&apps_smmu 0x2de6 0x04a0>;
+ <&apps_smmu 0x2986 0x0400>;
dma-coherent;
};
@@ -5229,15 +5093,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <7>;
iommus = <&apps_smmu 0x2947 0x04a0>,
- <&apps_smmu 0x2967 0x04a0>,
- <&apps_smmu 0x2987 0x0400>,
- <&apps_smmu 0x29c7 0x04a0>,
- <&apps_smmu 0x29e7 0x04a0>,
- <&apps_smmu 0x2d47 0x04a0>,
- <&apps_smmu 0x2d67 0x04a0>,
- <&apps_smmu 0x2d87 0x0400>,
- <&apps_smmu 0x2dc7 0x04a0>,
- <&apps_smmu 0x2de7 0x04a0>;
+ <&apps_smmu 0x2987 0x0400>;
dma-coherent;
};
@@ -5245,15 +5101,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <8>;
iommus = <&apps_smmu 0x2948 0x04a0>,
- <&apps_smmu 0x2968 0x04a0>,
- <&apps_smmu 0x2988 0x0400>,
- <&apps_smmu 0x29c8 0x04a0>,
- <&apps_smmu 0x29e8 0x04a0>,
- <&apps_smmu 0x2d48 0x04a0>,
- <&apps_smmu 0x2d68 0x04a0>,
- <&apps_smmu 0x2d88 0x0400>,
- <&apps_smmu 0x2dc8 0x04a0>,
- <&apps_smmu 0x2de8 0x04a0>;
+ <&apps_smmu 0x2988 0x0400>;
dma-coherent;
};
@@ -5261,15 +5109,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <9>;
iommus = <&apps_smmu 0x2949 0x04a0>,
- <&apps_smmu 0x2969 0x04a0>,
- <&apps_smmu 0x2989 0x0400>,
- <&apps_smmu 0x29c9 0x04a0>,
- <&apps_smmu 0x29e9 0x04a0>,
- <&apps_smmu 0x2d49 0x04a0>,
- <&apps_smmu 0x2d69 0x04a0>,
- <&apps_smmu 0x2d89 0x0400>,
- <&apps_smmu 0x2dc9 0x04a0>,
- <&apps_smmu 0x2de9 0x04a0>;
+ <&apps_smmu 0x2989 0x0400>;
dma-coherent;
};
@@ -5277,15 +5117,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <10>;
iommus = <&apps_smmu 0x294a 0x04a0>,
- <&apps_smmu 0x296a 0x04a0>,
- <&apps_smmu 0x298a 0x0400>,
- <&apps_smmu 0x29ca 0x04a0>,
- <&apps_smmu 0x29ea 0x04a0>,
- <&apps_smmu 0x2d4a 0x04a0>,
- <&apps_smmu 0x2d6a 0x04a0>,
- <&apps_smmu 0x2d8a 0x0400>,
- <&apps_smmu 0x2dca 0x04a0>,
- <&apps_smmu 0x2dea 0x04a0>;
+ <&apps_smmu 0x298a 0x0400>;
dma-coherent;
};
@@ -5293,15 +5125,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <11>;
iommus = <&apps_smmu 0x294b 0x04a0>,
- <&apps_smmu 0x296b 0x04a0>,
- <&apps_smmu 0x298b 0x0400>,
- <&apps_smmu 0x29cb 0x04a0>,
- <&apps_smmu 0x29eb 0x04a0>,
- <&apps_smmu 0x2d4b 0x04a0>,
- <&apps_smmu 0x2d6b 0x04a0>,
- <&apps_smmu 0x2d8b 0x0400>,
- <&apps_smmu 0x2dcb 0x04a0>,
- <&apps_smmu 0x2deb 0x04a0>;
+ <&apps_smmu 0x298b 0x0400>;
dma-coherent;
};
@@ -5309,15 +5133,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <12>;
iommus = <&apps_smmu 0x294c 0x04a0>,
- <&apps_smmu 0x296c 0x04a0>,
- <&apps_smmu 0x298c 0x0400>,
- <&apps_smmu 0x29cc 0x04a0>,
- <&apps_smmu 0x29ec 0x04a0>,
- <&apps_smmu 0x2d4c 0x04a0>,
- <&apps_smmu 0x2d6c 0x04a0>,
- <&apps_smmu 0x2d8c 0x0400>,
- <&apps_smmu 0x2dcc 0x04a0>,
- <&apps_smmu 0x2dec 0x04a0>;
+ <&apps_smmu 0x298c 0x0400>;
dma-coherent;
};
@@ -5325,15 +5141,7 @@
compatible = "qcom,fastrpc-compute-cb";
reg = <13>;
iommus = <&apps_smmu 0x294d 0x04a0>,
- <&apps_smmu 0x296d 0x04a0>,
- <&apps_smmu 0x298d 0x0400>,
- <&apps_smmu 0x29Cd 0x04a0>,
- <&apps_smmu 0x29ed 0x04a0>,
- <&apps_smmu 0x2d4d 0x04a0>,
- <&apps_smmu 0x2d6d 0x04a0>,
- <&apps_smmu 0x2d8d 0x0400>,
- <&apps_smmu 0x2dcd 0x04a0>,
- <&apps_smmu 0x2ded 0x04a0>;
+ <&apps_smmu 0x298d 0x0400>;
dma-coherent;
};
};
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 07/49] arm64: dts: qcom: sa8775p: Remove cdsp compute-cb@10
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (5 preceding siblings ...)
2025-06-02 13:46 ` [PATCH 6.15 06/49] arm64: dts: qcom: sa8775p: Remove extra entries from the iommus property Greg Kroah-Hartman
@ 2025-06-02 13:46 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 08/49] arm64: dts: qcom: sm8350: Fix typo in pil_camera_mem node Greg Kroah-Hartman
` (50 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:46 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, stable, Karthik Sanagavarapu,
Ling Xu, Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Karthik Sanagavarapu <quic_kartsana@quicinc.com>
commit d180c2bd3b43d55f30c9b99de68bc6bb8420d1c1 upstream.
Remove the context bank compute-cb@10 because these SMMU ids are S2-only
which is not used for S1 transaction.
Fixes: f7b01bfb4b47 ("arm64: qcom: sa8775p: Add ADSP and CDSP0 fastrpc nodes")
Cc: stable@kernel.org
Signed-off-by: Karthik Sanagavarapu <quic_kartsana@quicinc.com>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
Link: https://lore.kernel.org/r/4c9de858fda7848b77ea8c528c9b9d53600ad21a.1739260973.git.quic_lxu5@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 8 --------
1 file changed, 8 deletions(-)
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -4973,14 +4973,6 @@
dma-coherent;
};
- compute-cb@10 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <10>;
- iommus = <&apps_smmu 0x214a 0x04a0>,
- <&apps_smmu 0x218a 0x0400>;
- dma-coherent;
- };
-
compute-cb@11 {
compatible = "qcom,fastrpc-compute-cb";
reg = <11>;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 08/49] arm64: dts: qcom: sm8350: Fix typo in pil_camera_mem node
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (6 preceding siblings ...)
2025-06-02 13:46 ` [PATCH 6.15 07/49] arm64: dts: qcom: sa8775p: Remove cdsp compute-cb@10 Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 09/49] arm64: dts: qcom: sm8450: Add missing properties for cryptobam Greg Kroah-Hartman
` (49 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Alok Tiwari, Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alok Tiwari <alok.a.tiwari@oracle.com>
commit 295217420a44403a33c30f99d8337fe7b07eb02b upstream.
There is a typo in sm8350.dts where the node label
mmeory@85200000 should be memory@85200000.
This patch corrects the typo for clarity and consistency.
Fixes: b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://lore.kernel.org/r/20250514114656.2307828-1-alok.a.tiwari@oracle.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -455,7 +455,7 @@
no-map;
};
- pil_camera_mem: mmeory@85200000 {
+ pil_camera_mem: memory@85200000 {
reg = <0x0 0x85200000 0x0 0x500000>;
no-map;
};
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 09/49] arm64: dts: qcom: sm8450: Add missing properties for cryptobam
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (7 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 08/49] arm64: dts: qcom: sm8350: Fix typo in pil_camera_mem node Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 10/49] arm64: dts: qcom: sm8550: " Greg Kroah-Hartman
` (48 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Stephan Gerhold, Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephan Gerhold <stephan.gerhold@linaro.org>
commit 0fe6357229cb15a64b6413c62f1c3d4de68ce55f upstream.
num-channels and qcom,num-ees are required for BAM nodes without clock,
because the driver cannot ensure the hardware is powered on when trying to
obtain the information from the hardware registers. Specifying the node
without these properties is unsafe and has caused early boot crashes for
other SoCs before [1, 2].
Add the missing information from the hardware registers to ensure the
driver can probe successfully without causing crashes.
[1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/
[2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/
Cc: stable@vger.kernel.org
Fixes: b92b0d2f7582 ("arm64: dts: qcom: sm8450: add crypto nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250212-bam-dma-fixes-v1-2-f560889e65d8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -5283,6 +5283,8 @@
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
qcom,ee = <0>;
+ qcom,num-ees = <4>;
+ num-channels = <16>;
qcom,controlled-remotely;
iommus = <&apps_smmu 0x584 0x11>,
<&apps_smmu 0x588 0x0>,
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 10/49] arm64: dts: qcom: sm8550: Add missing properties for cryptobam
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (8 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 09/49] arm64: dts: qcom: sm8450: Add missing properties for cryptobam Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 11/49] arm64: dts: qcom: sm8650: " Greg Kroah-Hartman
` (47 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Stephan Gerhold, Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephan Gerhold <stephan.gerhold@linaro.org>
commit 663cd2cad36da23cf1a3db7868fce9f1a19b2d61 upstream.
num-channels and qcom,num-ees are required for BAM nodes without clock,
because the driver cannot ensure the hardware is powered on when trying to
obtain the information from the hardware registers. Specifying the node
without these properties is unsafe and has caused early boot crashes for
other SoCs before [1, 2].
Add the missing information from the hardware registers to ensure the
driver can probe successfully without causing crashes.
[1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/
[2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/
Cc: stable@vger.kernel.org
Fixes: 433477c3bf0b ("arm64: dts: qcom: sm8550: add QCrypto nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250212-bam-dma-fixes-v1-3-f560889e65d8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/sm8550.dtsi | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -1957,6 +1957,8 @@
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
qcom,ee = <0>;
+ qcom,num-ees = <4>;
+ num-channels = <20>;
qcom,controlled-remotely;
iommus = <&apps_smmu 0x480 0x0>,
<&apps_smmu 0x481 0x0>;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 11/49] arm64: dts: qcom: sm8650: Add missing properties for cryptobam
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (9 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 10/49] arm64: dts: qcom: sm8550: " Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 12/49] arm64: dts: qcom: x1e001de-devkit: Fix vreg_l2j_1p2 voltage Greg Kroah-Hartman
` (46 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Stephan Gerhold, Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephan Gerhold <stephan.gerhold@linaro.org>
commit 38b88722bce07b6a5927f45fbf7a9a85e834572c upstream.
num-channels and qcom,num-ees are required for BAM nodes without clock,
because the driver cannot ensure the hardware is powered on when trying to
obtain the information from the hardware registers. Specifying the node
without these properties is unsafe and has caused early boot crashes for
other SoCs before [1, 2].
Add the missing information from the hardware registers to ensure the
driver can probe successfully without causing crashes.
[1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/
[2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/
Cc: stable@vger.kernel.org
Fixes: 10e024671295 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250212-bam-dma-fixes-v1-4-f560889e65d8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/sm8650.dtsi | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -2533,6 +2533,8 @@
<&apps_smmu 0x481 0>;
qcom,ee = <0>;
+ qcom,num-ees = <4>;
+ num-channels = <20>;
qcom,controlled-remotely;
};
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 12/49] arm64: dts: qcom: x1e001de-devkit: Fix vreg_l2j_1p2 voltage
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (10 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 11/49] arm64: dts: qcom: sm8650: " Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 13/49] arm64: dts: qcom: x1e001de-devkit: mark l12b and l15b always-on Greg Kroah-Hartman
` (45 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Stephan Gerhold, Johan Hovold,
Abel Vesa, Konrad Dybcio, Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephan Gerhold <stephan.gerhold@linaro.org>
commit 3ed2a9e03abfeece9e30ebc746f935536f661414 upstream.
In the ACPI DSDT table, PPP_RESOURCE_ID_LDO2_J is configured with 1256000
uV instead of the 1200000 uV we have currently in the device tree. Use the
same for consistency and correctness.
Cc: stable@vger.kernel.org
Fixes: 7b8a31e82b87 ("arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250423-x1e-vreg-l2j-voltage-v1-2-24b6a2043025@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/x1e001de-devkit.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
+++ b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
@@ -745,8 +745,8 @@
vreg_l2j_1p2: ldo2 {
regulator-name = "vreg_l2j_1p2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1256000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 13/49] arm64: dts: qcom: x1e001de-devkit: mark l12b and l15b always-on
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (11 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 12/49] arm64: dts: qcom: x1e001de-devkit: Fix vreg_l2j_1p2 voltage Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 14/49] arm64: dts: qcom: x1e80100-asus-vivobook-s15: Fix vreg_l2j_1p2 voltage Greg Kroah-Hartman
` (44 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sibi Sankar, Konrad Dybcio,
Johan Hovold, Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <johan+linaro@kernel.org>
commit 7d328cc134f7db1e062f616a30cffe96fbc43abb upstream.
The l12b and l15b supplies are used by components that are not (fully)
described (and some never will be) and must never be disabled.
Mark the regulators as always-on to prevent them from being disabled,
for example, when consumers probe defer or suspend.
Fixes: 7b8a31e82b87 ("arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows")
Cc: stable@vger.kernel.org # 6.14
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/x1e001de-devkit.dts | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
+++ b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
@@ -507,6 +507,7 @@
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
};
vreg_l13b_3p0: ldo13 {
@@ -528,6 +529,7 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
};
vreg_l16b_2p9: ldo16 {
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 14/49] arm64: dts: qcom: x1e80100-asus-vivobook-s15: Fix vreg_l2j_1p2 voltage
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (12 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 13/49] arm64: dts: qcom: x1e001de-devkit: mark l12b and l15b always-on Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 15/49] arm64: dts: qcom: x1e80100-dell-xps13-9345: mark l12b and l15b always-on Greg Kroah-Hartman
` (43 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Stephan Gerhold, Johan Hovold,
Abel Vesa, Konrad Dybcio, Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephan Gerhold <stephan.gerhold@linaro.org>
commit 0fb9ecf8713a7a458f7378c86e0703467db2ad22 upstream.
In the ACPI DSDT table, PPP_RESOURCE_ID_LDO2_J is configured with 1256000
uV instead of the 1200000 uV we have currently in the device tree. Use the
same for consistency and correctness.
Cc: stable@vger.kernel.org
Fixes: d0e2f8f62dff ("arm64: dts: qcom: Add device tree for ASUS Vivobook S 15")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250423-x1e-vreg-l2j-voltage-v1-3-24b6a2043025@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
@@ -330,8 +330,8 @@
vreg_l2j_1p2: ldo2 {
regulator-name = "vreg_l2j_1p2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1256000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 15/49] arm64: dts: qcom: x1e80100-dell-xps13-9345: mark l12b and l15b always-on
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (13 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 14/49] arm64: dts: qcom: x1e80100-asus-vivobook-s15: Fix vreg_l2j_1p2 voltage Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 16/49] arm64: dts: qcom: x1e80100-hp-omnibook-x14: Enable SMB2360 0 and 1 Greg Kroah-Hartman
` (42 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Aleksandrs Vinarskis, Konrad Dybcio,
Johan Hovold, Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <johan+linaro@kernel.org>
commit 63169c07d74031c5e10a9f91229dabade880cf0f upstream.
The l12b and l15b supplies are used by components that are not (fully)
described (and some never will be) and must never be disabled.
Mark the regulators as always-on to prevent them from being disabled,
for example, when consumers probe defer or suspend.
Note that these supplies currently have no consumers described in
mainline.
Fixes: f5b788d0e8cd ("arm64: dts: qcom: Add support for X1-based Dell XPS 13 9345")
Cc: stable@vger.kernel.org # 6.13
Reviewed-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Tested-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
@@ -359,6 +359,7 @@
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
};
vreg_l13b_3p0: ldo13 {
@@ -380,6 +381,7 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
};
vreg_l17b_2p5: ldo17 {
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 16/49] arm64: dts: qcom: x1e80100-hp-omnibook-x14: Enable SMB2360 0 and 1
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (14 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 15/49] arm64: dts: qcom: x1e80100-dell-xps13-9345: mark l12b and l15b always-on Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 17/49] arm64: dts: qcom: x1e80100-hp-omnibook-x14: Fix vreg_l2j_1p2 voltage Greg Kroah-Hartman
` (41 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Juerg Haefliger, Konrad Dybcio,
Bryan ODonoghue, Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Juerg Haefliger <juerg.haefliger@canonical.com>
commit 48274b40a3719a950b1062f8125c972a2df5c083 upstream.
Commit d37e2646c8a5 ("arm64: dts: qcom: x1e80100-pmics: Enable all SMB2360
separately") disables all SMB2360s and let the board DTS explicitly enable
them. The HP OmniBook DTS is from before this change and is missing the
explicit enabling. Add that to get all USB root ports.
Fixes: 6f18b8d4142c ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14")
Cc: stable@vger.kernel.org # 6.14
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250319160509.1812805-1-juerg.haefliger@canonical.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
@@ -1352,18 +1352,22 @@
status = "okay";
};
+&smb2360_0 {
+ status = "okay";
+};
+
&smb2360_0_eusb2_repeater {
vdd18-supply = <&vreg_l3d_1p8>;
vdd3-supply = <&vreg_l2b_3p0>;
+};
+&smb2360_1 {
status = "okay";
};
&smb2360_1_eusb2_repeater {
vdd18-supply = <&vreg_l3d_1p8>;
vdd3-supply = <&vreg_l14b_3p0>;
-
- status = "okay";
};
&swr0 {
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 17/49] arm64: dts: qcom: x1e80100-hp-omnibook-x14: Fix vreg_l2j_1p2 voltage
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (15 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 16/49] arm64: dts: qcom: x1e80100-hp-omnibook-x14: Enable SMB2360 0 and 1 Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 18/49] arm64: dts: qcom: x1e80100-hp-x14: mark l12b and l15b always-on Greg Kroah-Hartman
` (40 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Stephan Gerhold, Johan Hovold,
Abel Vesa, Konrad Dybcio, Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephan Gerhold <stephan.gerhold@linaro.org>
commit 4a09dad9d437a13e9cd4383ff7791a816a6e1652 upstream.
In the ACPI DSDT table, PPP_RESOURCE_ID_LDO2_J is configured with 1256000
uV instead of the 1200000 uV we have currently in the device tree. Use the
same for consistency and correctness.
Cc: stable@vger.kernel.org
Fixes: 6f18b8d4142c ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250423-x1e-vreg-l2j-voltage-v1-4-24b6a2043025@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
@@ -871,8 +871,8 @@
vreg_l2j_1p2: ldo2 {
regulator-name = "vreg_l2j_1p2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1256000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 18/49] arm64: dts: qcom: x1e80100-hp-x14: mark l12b and l15b always-on
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (16 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 17/49] arm64: dts: qcom: x1e80100-hp-omnibook-x14: Fix vreg_l2j_1p2 voltage Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 19/49] arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: Fix vreg_l2j_1p2 voltage Greg Kroah-Hartman
` (39 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jens Glathe, Konrad Dybcio,
Johan Hovold, Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <johan+linaro@kernel.org>
commit 3ab4e212a41c46668adf93c8d10d0d3d6de8f0e4 upstream.
The l12b and l15b supplies are used by components that are not (fully)
described (and some never will be) and must never be disabled.
Mark the regulators as always-on to prevent them from being disabled,
for example, when consumers probe defer or suspend.
Fixes: 6f18b8d4142c ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14")
Cc: stable@vger.kernel.org # 6.14
Cc: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
@@ -633,6 +633,7 @@
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
};
vreg_l13b_3p0: ldo13 {
@@ -654,6 +655,7 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
};
vreg_l16b_2p9: ldo16 {
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 19/49] arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: Fix vreg_l2j_1p2 voltage
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (17 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 18/49] arm64: dts: qcom: x1e80100-hp-x14: mark l12b and l15b always-on Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 20/49] arm64: dts: qcom: x1e80100-qcp: " Greg Kroah-Hartman
` (38 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Stephan Gerhold, Johan Hovold,
Abel Vesa, Konrad Dybcio, Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephan Gerhold <stephan.gerhold@linaro.org>
commit 4f27ede34ca3369cdcde80c5a4ca84cdb28edbbb upstream.
In the ACPI DSDT table, PPP_RESOURCE_ID_LDO2_J is configured with 1256000
uV instead of the 1200000 uV we have currently in the device tree. Use the
same for consistency and correctness.
Cc: stable@vger.kernel.org
Fixes: 45247fe17db2 ("arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250423-x1e-vreg-l2j-voltage-v1-5-24b6a2043025@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -508,8 +508,8 @@
vreg_l2j_1p2: ldo2 {
regulator-name = "vreg_l2j_1p2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1256000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 20/49] arm64: dts: qcom: x1e80100-qcp: Fix vreg_l2j_1p2 voltage
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (18 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 19/49] arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: Fix vreg_l2j_1p2 voltage Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 21/49] arm64: dts: qcom: x1e80100-qcp: mark l12b and l15b always-on Greg Kroah-Hartman
` (37 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Stephan Gerhold, Johan Hovold,
Abel Vesa, Konrad Dybcio, Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephan Gerhold <stephan.gerhold@linaro.org>
commit efdbeae860bf0278b050c6c9ad5921afba4596d0 upstream.
In the ACPI DSDT table, PPP_RESOURCE_ID_LDO2_J is configured with 1256000
uV instead of the 1200000 uV we have currently in the device tree. Use the
same for consistency and correctness.
Cc: stable@vger.kernel.org
Fixes: af16b00578a7 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250423-x1e-vreg-l2j-voltage-v1-6-24b6a2043025@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -675,8 +675,8 @@
vreg_l2j_1p2: ldo2 {
regulator-name = "vreg_l2j_1p2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1256000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 21/49] arm64: dts: qcom: x1e80100-qcp: mark l12b and l15b always-on
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (19 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 20/49] arm64: dts: qcom: x1e80100-qcp: " Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 22/49] arm64: dts: qcom: x1e80100-yoga-slim7x: " Greg Kroah-Hartman
` (36 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Rajendra Nayak, Konrad Dybcio,
Johan Hovold, Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <johan+linaro@kernel.org>
commit ff6ba96378367133b66587bd3ee9f068a39ff3a9 upstream.
The l12b and l15b supplies are used by components that are not (fully)
described (and some never will be) and must never be disabled.
Mark the regulators as always-on to prevent them from being disabled,
for example, when consumers probe defer or suspend.
Fixes: af16b00578a7 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Cc: stable@vger.kernel.org # 6.8
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-8-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -437,6 +437,7 @@
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
};
vreg_l13b_3p0: ldo13 {
@@ -458,6 +459,7 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
};
vreg_l16b_2p9: ldo16 {
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 22/49] arm64: dts: qcom: x1e80100-yoga-slim7x: mark l12b and l15b always-on
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (20 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 21/49] arm64: dts: qcom: x1e80100-qcp: mark l12b and l15b always-on Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 23/49] arm64: dts: qcom: x1e80100: Fix video thermal zone Greg Kroah-Hartman
` (35 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Srinivas Kandagatla, Konrad Dybcio,
Johan Hovold, Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <johan+linaro@kernel.org>
commit f43a71dc6d8d8378af587675eec77c06e0298c79 upstream.
The l12b and l15b supplies are used by components that are not (fully)
described (and some never will be) and must never be disabled.
Mark the regulators as always-on to prevent them from being disabled,
for example, when consumers probe defer or suspend.
Fixes: 45247fe17db2 ("arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree")
Cc: stable@vger.kernel.org # 6.11
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-7-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -290,6 +290,7 @@
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
};
vreg_l14b_3p0: ldo14 {
@@ -304,8 +305,8 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
};
-
};
regulators-1 {
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 23/49] arm64: dts: qcom: x1e80100: Fix video thermal zone
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (21 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 22/49] arm64: dts: qcom: x1e80100-yoga-slim7x: " Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 24/49] arm64: dts: qcom: x1e80100: Apply consistent critical thermal shutdown Greg Kroah-Hartman
` (34 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Stephan Gerhold, Johan Hovold,
Konrad Dybcio, Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephan Gerhold <stephan.gerhold@linaro.org>
commit 801befff4c827aa72e3698367c5afc18987a6a3f upstream.
A passive trip point at 125°C is pretty high, this is usually the
temperature for the critical shutdown trip point. Also, we don't have any
passive cooling devices attached to the video thermal zone.
Change this to be a critical trip point, and add a "hot" trip point at
90°C for consistency with the other thermal zones.
Cc: stable@vger.kernel.org
Fixes: 4e915987ff5b ("arm64: dts: qcom: x1e80100: Enable tsens and thermal zone nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250219-x1e80100-thermal-fixes-v1-1-d110e44ac3f9@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -8727,15 +8727,19 @@
};
video-thermal {
- polling-delay-passive = <250>;
-
thermal-sensors = <&tsens0 12>;
trips {
trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ video-critical {
temperature = <125000>;
hysteresis = <1000>;
- type = "passive";
+ type = "critical";
};
};
};
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 24/49] arm64: dts: qcom: x1e80100: Apply consistent critical thermal shutdown
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (22 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 23/49] arm64: dts: qcom: x1e80100: Fix video thermal zone Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 25/49] arm64: dts: qcom: x1e80100: Add GPU cooling Greg Kroah-Hartman
` (33 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Stephan Gerhold, Johan Hovold,
Konrad Dybcio, Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephan Gerhold <stephan.gerhold@linaro.org>
commit 03f2b8eed73418269a158ccebad5d8d8f2f6daa1 upstream.
The firmware configures the TSENS controller with a maximum temperature of
120°C. When reaching that temperature, the hardware automatically triggers
a reset of the entire platform. Some of the thermal zones in x1e80100.dtsi
use a critical trip point of 125°C. It's impossible to reach those.
It's preferable to shut down the system cleanly before reaching the
hardware trip point. Make the critical temperature trip points consistent
by setting all of them to 115°C and apply a consistent hysteresis.
The ACPI tables also specify 115°C as critical shutdown temperature.
Cc: stable@vger.kernel.org
Fixes: 4e915987ff5b ("arm64: dts: qcom: x1e80100: Enable tsens and thermal zone nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250219-x1e80100-thermal-fixes-v1-2-d110e44ac3f9@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 128 ++++++++++++++++-----------------
1 file changed, 64 insertions(+), 64 deletions(-)
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -8457,8 +8457,8 @@
};
aoss0-critical {
- temperature = <125000>;
- hysteresis = <0>;
+ temperature = <115000>;
+ hysteresis = <1000>;
type = "critical";
};
};
@@ -8483,7 +8483,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -8509,7 +8509,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -8535,7 +8535,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -8561,7 +8561,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -8587,7 +8587,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -8613,7 +8613,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -8639,7 +8639,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -8665,7 +8665,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -8683,8 +8683,8 @@
};
cpuss2-critical {
- temperature = <125000>;
- hysteresis = <0>;
+ temperature = <115000>;
+ hysteresis = <1000>;
type = "critical";
};
};
@@ -8701,8 +8701,8 @@
};
cpuss2-critical {
- temperature = <125000>;
- hysteresis = <0>;
+ temperature = <115000>;
+ hysteresis = <1000>;
type = "critical";
};
};
@@ -8719,7 +8719,7 @@
};
mem-critical {
- temperature = <125000>;
+ temperature = <115000>;
hysteresis = <0>;
type = "critical";
};
@@ -8737,7 +8737,7 @@
};
video-critical {
- temperature = <125000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -8755,8 +8755,8 @@
};
aoss0-critical {
- temperature = <125000>;
- hysteresis = <0>;
+ temperature = <115000>;
+ hysteresis = <1000>;
type = "critical";
};
};
@@ -8781,7 +8781,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -8807,7 +8807,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -8833,7 +8833,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -8859,7 +8859,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -8885,7 +8885,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -8911,7 +8911,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -8937,7 +8937,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -8963,7 +8963,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -8981,8 +8981,8 @@
};
cpuss2-critical {
- temperature = <125000>;
- hysteresis = <0>;
+ temperature = <115000>;
+ hysteresis = <1000>;
type = "critical";
};
};
@@ -8999,8 +8999,8 @@
};
cpuss2-critical {
- temperature = <125000>;
- hysteresis = <0>;
+ temperature = <115000>;
+ hysteresis = <1000>;
type = "critical";
};
};
@@ -9017,8 +9017,8 @@
};
aoss0-critical {
- temperature = <125000>;
- hysteresis = <0>;
+ temperature = <115000>;
+ hysteresis = <1000>;
type = "critical";
};
};
@@ -9043,7 +9043,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -9069,7 +9069,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -9095,7 +9095,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -9121,7 +9121,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -9147,7 +9147,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -9173,7 +9173,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -9199,7 +9199,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -9225,7 +9225,7 @@
};
cpu-critical {
- temperature = <110000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -9243,8 +9243,8 @@
};
cpuss2-critical {
- temperature = <125000>;
- hysteresis = <0>;
+ temperature = <115000>;
+ hysteresis = <1000>;
type = "critical";
};
};
@@ -9261,8 +9261,8 @@
};
cpuss2-critical {
- temperature = <125000>;
- hysteresis = <0>;
+ temperature = <115000>;
+ hysteresis = <1000>;
type = "critical";
};
};
@@ -9279,8 +9279,8 @@
};
aoss0-critical {
- temperature = <125000>;
- hysteresis = <0>;
+ temperature = <115000>;
+ hysteresis = <1000>;
type = "critical";
};
};
@@ -9297,8 +9297,8 @@
};
nsp0-critical {
- temperature = <125000>;
- hysteresis = <0>;
+ temperature = <115000>;
+ hysteresis = <1000>;
type = "critical";
};
};
@@ -9315,8 +9315,8 @@
};
nsp1-critical {
- temperature = <125000>;
- hysteresis = <0>;
+ temperature = <115000>;
+ hysteresis = <1000>;
type = "critical";
};
};
@@ -9333,8 +9333,8 @@
};
nsp2-critical {
- temperature = <125000>;
- hysteresis = <0>;
+ temperature = <115000>;
+ hysteresis = <1000>;
type = "critical";
};
};
@@ -9351,8 +9351,8 @@
};
nsp3-critical {
- temperature = <125000>;
- hysteresis = <0>;
+ temperature = <115000>;
+ hysteresis = <1000>;
type = "critical";
};
};
@@ -9377,7 +9377,7 @@
};
trip-point2 {
- temperature = <125000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -9403,7 +9403,7 @@
};
trip-point2 {
- temperature = <125000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -9429,7 +9429,7 @@
};
trip-point2 {
- temperature = <125000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -9455,7 +9455,7 @@
};
trip-point2 {
- temperature = <125000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -9481,7 +9481,7 @@
};
trip-point2 {
- temperature = <125000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -9507,7 +9507,7 @@
};
trip-point2 {
- temperature = <125000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -9533,7 +9533,7 @@
};
trip-point2 {
- temperature = <125000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -9559,7 +9559,7 @@
};
trip-point2 {
- temperature = <125000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
@@ -9578,7 +9578,7 @@
camera0-critical {
temperature = <115000>;
- hysteresis = <0>;
+ hysteresis = <1000>;
type = "critical";
};
};
@@ -9596,7 +9596,7 @@
camera0-critical {
temperature = <115000>;
- hysteresis = <0>;
+ hysteresis = <1000>;
type = "critical";
};
};
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 25/49] arm64: dts: qcom: x1e80100: Add GPU cooling
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (23 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 24/49] arm64: dts: qcom: x1e80100: Apply consistent critical thermal shutdown Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 26/49] arm64: dts: qcom: x1e80100: Fix PCIe 3rd controller DBI size Greg Kroah-Hartman
` (32 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Stephan Gerhold, Johan Hovold,
Konrad Dybcio, Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephan Gerhold <stephan.gerhold@linaro.org>
commit 5ba21fa11f473c9827f378ace8c9f983de9e0287 upstream.
Unlike the CPU, the GPU does not throttle its speed automatically when it
reaches high temperatures. With certain high GPU loads it is possible to
reach the critical hardware shutdown temperature of 120°C, endangering the
hardware and making it impossible to run certain applications.
Set up GPU cooling similar to the ACPI tables, by throttling the GPU speed
when reaching 95°C and polling every 200ms.
Cc: stable@vger.kernel.org
Fixes: 721e38301b79 ("arm64: dts: qcom: x1e80100: Add gpu support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250219-x1e80100-thermal-fixes-v1-3-d110e44ac3f9@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 169 +++++++++++++++++----------------
1 file changed, 89 insertions(+), 80 deletions(-)
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -20,6 +20,7 @@
#include <dt-bindings/soc/qcom,gpr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
@@ -9359,24 +9360,25 @@
};
gpuss-0-thermal {
- polling-delay-passive = <10>;
+ polling-delay-passive = <200>;
thermal-sensors = <&tsens3 5>;
- trips {
- trip-point0 {
- temperature = <85000>;
- hysteresis = <1000>;
- type = "passive";
+ cooling-maps {
+ map0 {
+ trip = <&gpuss0_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
+ };
- trip-point1 {
- temperature = <90000>;
+ trips {
+ gpuss0_alert0: trip-point0 {
+ temperature = <95000>;
hysteresis = <1000>;
- type = "hot";
+ type = "passive";
};
- trip-point2 {
+ gpu-critical {
temperature = <115000>;
hysteresis = <1000>;
type = "critical";
@@ -9385,24 +9387,25 @@
};
gpuss-1-thermal {
- polling-delay-passive = <10>;
+ polling-delay-passive = <200>;
thermal-sensors = <&tsens3 6>;
- trips {
- trip-point0 {
- temperature = <85000>;
- hysteresis = <1000>;
- type = "passive";
+ cooling-maps {
+ map0 {
+ trip = <&gpuss1_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
+ };
- trip-point1 {
- temperature = <90000>;
+ trips {
+ gpuss1_alert0: trip-point0 {
+ temperature = <95000>;
hysteresis = <1000>;
- type = "hot";
+ type = "passive";
};
- trip-point2 {
+ gpu-critical {
temperature = <115000>;
hysteresis = <1000>;
type = "critical";
@@ -9411,24 +9414,25 @@
};
gpuss-2-thermal {
- polling-delay-passive = <10>;
+ polling-delay-passive = <200>;
thermal-sensors = <&tsens3 7>;
- trips {
- trip-point0 {
- temperature = <85000>;
- hysteresis = <1000>;
- type = "passive";
+ cooling-maps {
+ map0 {
+ trip = <&gpuss2_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
+ };
- trip-point1 {
- temperature = <90000>;
+ trips {
+ gpuss2_alert0: trip-point0 {
+ temperature = <95000>;
hysteresis = <1000>;
- type = "hot";
+ type = "passive";
};
- trip-point2 {
+ gpu-critical {
temperature = <115000>;
hysteresis = <1000>;
type = "critical";
@@ -9437,24 +9441,25 @@
};
gpuss-3-thermal {
- polling-delay-passive = <10>;
+ polling-delay-passive = <200>;
thermal-sensors = <&tsens3 8>;
- trips {
- trip-point0 {
- temperature = <85000>;
- hysteresis = <1000>;
- type = "passive";
+ cooling-maps {
+ map0 {
+ trip = <&gpuss3_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
+ };
- trip-point1 {
- temperature = <90000>;
+ trips {
+ gpuss3_alert0: trip-point0 {
+ temperature = <95000>;
hysteresis = <1000>;
- type = "hot";
+ type = "passive";
};
- trip-point2 {
+ gpu-critical {
temperature = <115000>;
hysteresis = <1000>;
type = "critical";
@@ -9463,24 +9468,25 @@
};
gpuss-4-thermal {
- polling-delay-passive = <10>;
+ polling-delay-passive = <200>;
thermal-sensors = <&tsens3 9>;
- trips {
- trip-point0 {
- temperature = <85000>;
- hysteresis = <1000>;
- type = "passive";
+ cooling-maps {
+ map0 {
+ trip = <&gpuss4_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
+ };
- trip-point1 {
- temperature = <90000>;
+ trips {
+ gpuss4_alert0: trip-point0 {
+ temperature = <95000>;
hysteresis = <1000>;
- type = "hot";
+ type = "passive";
};
- trip-point2 {
+ gpu-critical {
temperature = <115000>;
hysteresis = <1000>;
type = "critical";
@@ -9489,24 +9495,25 @@
};
gpuss-5-thermal {
- polling-delay-passive = <10>;
+ polling-delay-passive = <200>;
thermal-sensors = <&tsens3 10>;
- trips {
- trip-point0 {
- temperature = <85000>;
- hysteresis = <1000>;
- type = "passive";
+ cooling-maps {
+ map0 {
+ trip = <&gpuss5_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
+ };
- trip-point1 {
- temperature = <90000>;
+ trips {
+ gpuss5_alert0: trip-point0 {
+ temperature = <95000>;
hysteresis = <1000>;
- type = "hot";
+ type = "passive";
};
- trip-point2 {
+ gpu-critical {
temperature = <115000>;
hysteresis = <1000>;
type = "critical";
@@ -9515,24 +9522,25 @@
};
gpuss-6-thermal {
- polling-delay-passive = <10>;
+ polling-delay-passive = <200>;
thermal-sensors = <&tsens3 11>;
- trips {
- trip-point0 {
- temperature = <85000>;
- hysteresis = <1000>;
- type = "passive";
+ cooling-maps {
+ map0 {
+ trip = <&gpuss6_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
+ };
- trip-point1 {
- temperature = <90000>;
+ trips {
+ gpuss6_alert0: trip-point0 {
+ temperature = <95000>;
hysteresis = <1000>;
- type = "hot";
+ type = "passive";
};
- trip-point2 {
+ gpu-critical {
temperature = <115000>;
hysteresis = <1000>;
type = "critical";
@@ -9541,24 +9549,25 @@
};
gpuss-7-thermal {
- polling-delay-passive = <10>;
+ polling-delay-passive = <200>;
thermal-sensors = <&tsens3 12>;
- trips {
- trip-point0 {
- temperature = <85000>;
- hysteresis = <1000>;
- type = "passive";
+ cooling-maps {
+ map0 {
+ trip = <&gpuss7_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
+ };
- trip-point1 {
- temperature = <90000>;
+ trips {
+ gpuss7_alert0: trip-point0 {
+ temperature = <95000>;
hysteresis = <1000>;
- type = "hot";
+ type = "passive";
};
- trip-point2 {
+ gpu-critical {
temperature = <115000>;
hysteresis = <1000>;
type = "critical";
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 26/49] arm64: dts: qcom: x1e80100: Fix PCIe 3rd controller DBI size
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (24 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 25/49] arm64: dts: qcom: x1e80100: Add GPU cooling Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 27/49] arm64: dts: ti: k3-am62-main: Set eMMC clock parent to default Greg Kroah-Hartman
` (31 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Abel Vesa, Konrad Dybcio,
Bjorn Andersson
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Abel Vesa <abel.vesa@linaro.org>
commit 181faec4cc9d90dad0ec7f7c8124269c0ba2e107 upstream.
According to documentation, the DBI range size is 0xf20. So fix it.
Cc: stable@vger.kernel.org # 6.14
Fixes: f8af195beeb0 ("arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250422-x1e80100-dts-fix-pcie3-dbi-size-v1-1-c197701fd7e4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -3126,7 +3126,7 @@
device_type = "pci";
compatible = "qcom,pcie-x1e80100";
reg = <0x0 0x01bd0000 0x0 0x3000>,
- <0x0 0x78000000 0x0 0xf1d>,
+ <0x0 0x78000000 0x0 0xf20>,
<0x0 0x78000f40 0x0 0xa8>,
<0x0 0x78001000 0x0 0x1000>,
<0x0 0x78100000 0x0 0x100000>,
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 27/49] arm64: dts: ti: k3-am62-main: Set eMMC clock parent to default
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (25 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 26/49] arm64: dts: qcom: x1e80100: Fix PCIe 3rd controller DBI size Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 28/49] arm64: dts: ti: k3-am62a-main: " Greg Kroah-Hartman
` (30 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Judith Mendez, Udit Kumar,
Bryan Brattlof, Nishanth Menon
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Judith Mendez <jm@ti.com>
commit 3a71cdfec94436079513d9adf4b1d4f7a7edd917 upstream.
Set eMMC clock parents to the defaults which is MAIN_PLL0_HSDIV5_CLKOUT
for eMMC. This change is necessary since DM is not implementing the
correct procedure to switch PLL clock source for eMMC and MMC CLK mux is
not glich-free. As a preventative action, lets switch back to the defaults.
Fixes: c37c58fdeb8a ("arm64: dts: ti: k3-am62: Add more peripheral nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Udit Kumar <u-kumar1@ti.com>
Acked-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20250429163337.15634-2-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 2 --
1 file changed, 2 deletions(-)
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -552,8 +552,6 @@
power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
clock-names = "clk_ahb", "clk_xin";
- assigned-clocks = <&k3_clks 57 6>;
- assigned-clock-parents = <&k3_clks 57 8>;
bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 28/49] arm64: dts: ti: k3-am62a-main: Set eMMC clock parent to default
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (26 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 27/49] arm64: dts: ti: k3-am62-main: Set eMMC clock parent to default Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 29/49] arm64: dts: ti: k3-am62p-j722s-common-main: " Greg Kroah-Hartman
` (29 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Judith Mendez, Udit Kumar,
Bryan Brattlof, Nishanth Menon
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Judith Mendez <jm@ti.com>
commit 6af731c5de59cc4e7cce193d446f1fe872ac711b upstream.
Set eMMC clock parents to the defaults which is MAIN_PLL0_HSDIV5_CLKOUT
for eMMC. This change is necessary since DM is not implementing the
correct procedure to switch PLL clock source for eMMC and MMC CLK mux is
not glich-free. As a preventative action, lets switch back to the defaults.
Fixes: d3ae4e8d8b6a ("arm64: dts: ti: k3-am62a-main: Add sdhci0 instance")
Cc: stable@vger.kernel.org
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Udit Kumar <u-kumar1@ti.com>
Acked-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20250429163337.15634-3-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 2 --
1 file changed, 2 deletions(-)
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -575,8 +575,6 @@
power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
clock-names = "clk_ahb", "clk_xin";
- assigned-clocks = <&k3_clks 57 6>;
- assigned-clock-parents = <&k3_clks 57 8>;
bus-width = <8>;
mmc-hs200-1_8v;
ti,clkbuf-sel = <0x7>;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 29/49] arm64: dts: ti: k3-am62p-j722s-common-main: Set eMMC clock parent to default
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (27 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 28/49] arm64: dts: ti: k3-am62a-main: " Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 30/49] arm64: dts: ti: k3-am62x: Remove clock-names property from IMX219 overlay Greg Kroah-Hartman
` (28 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Judith Mendez, Udit Kumar,
Bryan Brattlof, Nishanth Menon
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Judith Mendez <jm@ti.com>
commit 9c6b73fc72e19c449147233587833ce20f84b660 upstream.
Set eMMC clock parents to the defaults which is MAIN_PLL0_HSDIV5_CLKOUT
for eMMC. This change is necessary since DM is not implementing the
correct procedure to switch PLL clock source for eMMC and MMC CLK mux is
not glich-free. As a preventative action, lets switch back to the defaults.
Fixes: b5080c7c1f7e ("arm64: dts: ti: k3-am62p: Add nodes for more IPs")
Cc: stable@vger.kernel.org
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Udit Kumar <u-kumar1@ti.com>
Acked-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20250429163337.15634-4-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 2 --
1 file changed, 2 deletions(-)
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
@@ -564,8 +564,6 @@
power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 57 1>, <&k3_clks 57 2>;
clock-names = "clk_ahb", "clk_xin";
- assigned-clocks = <&k3_clks 57 2>;
- assigned-clock-parents = <&k3_clks 57 4>;
bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 30/49] arm64: dts: ti: k3-am62x: Remove clock-names property from IMX219 overlay
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (28 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 29/49] arm64: dts: ti: k3-am62p-j722s-common-main: " Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 31/49] arm64: dts: ti: k3-am62x: Rename I2C switch to I2C mux in " Greg Kroah-Hartman
` (27 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yemike Abhilash Chandra,
Neha Malcom Francis, Jai Luthra, Nishanth Menon
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
commit c68ab54a89a8c935732589a35ea2596e2329f167 upstream.
The IMX219 sensor device tree bindings do not include a clock-names
property. Remove the incorrectly added clock-names entry to avoid
dtbs_check warnings.
Fixes: 4111db03dc05 ("arm64: dts: ti: k3-am62x: Add overlay for IMX219")
Cc: stable@vger.kernel.org
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Jai Luthra <jai.luthra@linux.dev>
Link: https://lore.kernel.org/r/20250415111328.3847502-6-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso | 1 -
1 file changed, 1 deletion(-)
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
@@ -39,7 +39,6 @@
reg = <0x10>;
clocks = <&clk_imx219_fixed>;
- clock-names = "xclk";
reset-gpios = <&exp1 13 GPIO_ACTIVE_HIGH>;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 31/49] arm64: dts: ti: k3-am62x: Rename I2C switch to I2C mux in IMX219 overlay
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (29 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 30/49] arm64: dts: ti: k3-am62x: Remove clock-names property from IMX219 overlay Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 32/49] arm64: dts: ti: k3-am62x: Rename I2C switch to I2C mux in OV5640 overlay Greg Kroah-Hartman
` (26 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yemike Abhilash Chandra,
Neha Malcom Francis, Jai Luthra, Nishanth Menon
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
commit 7b75dd2029ee01a8c11fcf4d97f3ccebbef9f8eb upstream.
The IMX219 device tree overlay incorrectly defined an I2C switch
instead of an I2C mux. According to the DT bindings, the correct
terminology and node definition should use "i2c-mux" instead of
"i2c-switch". Hence, update the same to avoid dtbs_check warnings.
Fixes: 4111db03dc05 ("arm64: dts: ti: k3-am62x: Add overlay for IMX219")
Cc: stable@vger.kernel.org
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Jai Luthra <jai.luthra@linux.dev>
Link: https://lore.kernel.org/r/20250415111328.3847502-7-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
@@ -22,7 +22,7 @@
#size-cells = <0>;
status = "okay";
- i2c-switch@71 {
+ i2c-mux@71 {
compatible = "nxp,pca9543";
#address-cells = <1>;
#size-cells = <0>;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 32/49] arm64: dts: ti: k3-am62x: Rename I2C switch to I2C mux in OV5640 overlay
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (30 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 31/49] arm64: dts: ti: k3-am62x: Rename I2C switch to I2C mux in " Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 33/49] arm64: dts: ti: k3-am65-main: Add missing taps to sdhci0 Greg Kroah-Hartman
` (25 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yemike Abhilash Chandra,
Neha Malcom Francis, Jai Luthra, Nishanth Menon
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
commit b22cc402d38774ccc552d18e762c25dde02f7be0 upstream.
The OV5640 device tree overlay incorrectly defined an I2C switch
instead of an I2C mux. According to the DT bindings, the correct
terminology and node definition should use "i2c-mux" instead of
"i2c-switch". Hence, update the same to avoid dtbs_check warnings.
Fixes: 635ed9715194 ("arm64: dts: ti: k3-am62x: Add overlays for OV5640")
Cc: stable@vger.kernel.org
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Jai Luthra <jai.luthra@linux.dev>
Link: https://lore.kernel.org/r/20250415111328.3847502-8-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso | 2 +-
arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
@@ -22,7 +22,7 @@
#size-cells = <0>;
status = "okay";
- i2c-switch@71 {
+ i2c-mux@71 {
compatible = "nxp,pca9543";
#address-cells = <1>;
#size-cells = <0>;
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
@@ -22,7 +22,7 @@
#size-cells = <0>;
status = "okay";
- i2c-switch@71 {
+ i2c-mux@71 {
compatible = "nxp,pca9543";
#address-cells = <1>;
#size-cells = <0>;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 33/49] arm64: dts: ti: k3-am65-main: Add missing taps to sdhci0
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (31 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 32/49] arm64: dts: ti: k3-am62x: Rename I2C switch to I2C mux in OV5640 overlay Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 34/49] arm64: dts: ti: k3-am68-sk: Fix regulator hierarchy Greg Kroah-Hartman
` (24 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Judith Mendez, Moteen Shah,
Nishanth Menon
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Judith Mendez <jm@ti.com>
commit f55c9f087cc2e2252d44ffd9d58def2066fc176e upstream.
For am65x, add missing ITAPDLYSEL values for Default Speed and High
Speed SDR modes to sdhci0 node according to the device datasheet [0].
[0] https://www.ti.com/lit/gpn/am6548
Fixes: eac99d38f861 ("arm64: dts: ti: k3-am654-main: Update otap-del-sel values")
Cc: stable@vger.kernel.org
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
Link: https://lore.kernel.org/r/20250429173009.33994-1-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -449,6 +449,8 @@
ti,otap-del-sel-mmc-hs = <0x0>;
ti,otap-del-sel-ddr52 = <0x5>;
ti,otap-del-sel-hs200 = <0x5>;
+ ti,itap-del-sel-legacy = <0xa>;
+ ti,itap-del-sel-mmc-hs = <0x1>;
ti,itap-del-sel-ddr52 = <0x0>;
dma-coherent;
status = "disabled";
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 34/49] arm64: dts: ti: k3-am68-sk: Fix regulator hierarchy
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (32 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 33/49] arm64: dts: ti: k3-am65-main: Add missing taps to sdhci0 Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 35/49] arm64: dts: ti: k3-j721e-sk: Add DT nodes for power regulators Greg Kroah-Hartman
` (23 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yemike Abhilash Chandra,
Neha Malcom Francis, Udit Kumar, Nishanth Menon
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
commit 7edf0a4d3bb7f5cd84f172b76c380c4259bb4ef8 upstream.
Update the vin-supply of the TLV71033 regulator from LM5141 (vsys_3v3)
to LM61460 (vsys_5v0) to match the schematics. Add a fixed regulator
node for the LM61460 5V supply to support this change.
AM68-SK schematics: https://www.ti.com/lit/zip/sprr463
Fixes: a266c180b398 ("arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board")
Cc: stable@vger.kernel.org
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250415111328.3847502-3-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -44,6 +44,17 @@
regulator-boot-on;
};
+ vsys_5v0: regulator-vsys5v0 {
+ /* Output of LM61460 */
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vusb_main>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
vsys_3v3: regulator-vsys3v3 {
/* Output of LM5141 */
compatible = "regulator-fixed";
@@ -76,7 +87,7 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
- vin-supply = <&vsys_3v3>;
+ vin-supply = <&vsys_5v0>;
gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>;
states = <1800000 0x0>,
<3300000 0x1>;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 35/49] arm64: dts: ti: k3-j721e-sk: Add DT nodes for power regulators
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (33 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 34/49] arm64: dts: ti: k3-am68-sk: Fix regulator hierarchy Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 36/49] arm64: dts: ti: k3-j721e-sk: Remove clock-names property from IMX219 overlay Greg Kroah-Hartman
` (22 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yemike Abhilash Chandra, Udit Kumar,
Nishanth Menon
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
commit 97b67cc102dc2cc8aa39a569c22a196e21af5a21 upstream.
Add device tree nodes for two power regulators on the J721E SK board.
vsys_5v0: A fixed regulator representing the 5V supply output from the
LM61460 and vdd_sd_dv: A GPIO-controlled TLV71033 regulator.
J721E-SK schematics: https://www.ti.com/lit/zip/sprr438
Fixes: 1bfda92a3a36 ("arm64: dts: ti: Add support for J721E SK")
Cc: stable@vger.kernel.org
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250415111328.3847502-2-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -184,6 +184,17 @@
regulator-boot-on;
};
+ vsys_5v0: fixedregulator-vsys5v0 {
+ /* Output of LM61460 */
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vusb_main>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
vdd_mmc1: fixedregulator-sd {
compatible = "regulator-fixed";
pinctrl-names = "default";
@@ -211,6 +222,20 @@
<3300000 0x1>;
};
+ vdd_sd_dv: gpio-regulator-TLV71033 {
+ compatible = "regulator-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vdd_sd_dv_pins_default>;
+ regulator-name = "tlv71033";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ vin-supply = <&vsys_5v0>;
+ gpios = <&main_gpio0 118 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x0>,
+ <3300000 0x1>;
+ };
+
transceiver1: can-phy1 {
compatible = "ti,tcan1042";
#phy-cells = <0>;
@@ -613,6 +638,12 @@
>;
};
+ vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x1dc, PIN_OUTPUT, 7) /* (Y1) SPI1_CLK.GPIO0_118 */
+ >;
+ };
+
wkup_uart0_pins_default: wkup-uart0-default-pins {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 36/49] arm64: dts: ti: k3-j721e-sk: Remove clock-names property from IMX219 overlay
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (34 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 35/49] arm64: dts: ti: k3-j721e-sk: Add DT nodes for power regulators Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 37/49] arm64: dts: ti: k3-j721e-sk: Add requiried voltage supplies for IMX219 Greg Kroah-Hartman
` (21 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yemike Abhilash Chandra,
Neha Malcom Francis, Jai Luthra, Nishanth Menon
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
commit 24ab76e55ef15450c6681a2b5db4d78f45200939 upstream.
The IMX219 sensor device tree bindings do not include a clock-names
property. Remove the incorrectly added clock-names entry to avoid
dtbs_check warnings.
Fixes: f767eb918096 ("arm64: dts: ti: k3-j721e-sk: Add overlay for IMX219")
Cc: stable@vger.kernel.org
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Jai Luthra <jai.luthra@linux.dev>
Link: https://lore.kernel.org/r/20250415111328.3847502-4-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso | 2 --
1 file changed, 2 deletions(-)
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
@@ -34,7 +34,6 @@
reg = <0x10>;
clocks = <&clk_imx219_fixed>;
- clock-names = "xclk";
port {
csi2_cam0: endpoint {
@@ -56,7 +55,6 @@
reg = <0x10>;
clocks = <&clk_imx219_fixed>;
- clock-names = "xclk";
port {
csi2_cam1: endpoint {
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 37/49] arm64: dts: ti: k3-j721e-sk: Add requiried voltage supplies for IMX219
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (35 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 36/49] arm64: dts: ti: k3-j721e-sk: Remove clock-names property from IMX219 overlay Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 38/49] arm64: dts: ti: k3-j722s-evm: Enable "serdes_wiz0" and "serdes_wiz1" Greg Kroah-Hartman
` (20 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Yemike Abhilash Chandra,
Nishanth Menon
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
commit c6a20a250200da6fcaf80fe945b7b92cba8cfe0f upstream.
The device tree overlay for the IMX219 sensor requires three voltage
supplies to be defined: VANA (analog), VDIG (digital core), and VDDL
(digital I/O). Add the corresponding voltage supply definitions to
avoid dtbs_check warnings.
Fixes: f767eb918096 ("arm64: dts: ti: k3-j721e-sk: Add overlay for IMX219")
Cc: stable@vger.kernel.org
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Link: https://lore.kernel.org/r/20250415111328.3847502-5-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso | 33 +++++++++++++++
1 file changed, 33 insertions(+)
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
@@ -19,6 +19,33 @@
#clock-cells = <0>;
clock-frequency = <24000000>;
};
+
+ reg_2p8v: regulator-2p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ vin-supply = <&vdd_sd_dv>;
+ regulator-always-on;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vdd_sd_dv>;
+ regulator-always-on;
+ };
+
+ reg_1p2v: regulator-1p2v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ vin-supply = <&vdd_sd_dv>;
+ regulator-always-on;
+ };
};
&csi_mux {
@@ -34,6 +61,9 @@
reg = <0x10>;
clocks = <&clk_imx219_fixed>;
+ VANA-supply = <®_2p8v>;
+ VDIG-supply = <®_1p8v>;
+ VDDL-supply = <®_1p2v>;
port {
csi2_cam0: endpoint {
@@ -55,6 +85,9 @@
reg = <0x10>;
clocks = <&clk_imx219_fixed>;
+ VANA-supply = <®_2p8v>;
+ VDIG-supply = <®_1p8v>;
+ VDDL-supply = <®_1p2v>;
port {
csi2_cam1: endpoint {
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 38/49] arm64: dts: ti: k3-j722s-evm: Enable "serdes_wiz0" and "serdes_wiz1"
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (36 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 37/49] arm64: dts: ti: k3-j721e-sk: Add requiried voltage supplies for IMX219 Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 39/49] arm64: dts: ti: k3-j722s-main: Disable " Greg Kroah-Hartman
` (19 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Siddharth Vadapalli, Udit Kumar,
Nishanth Menon
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Siddharth Vadapalli <s-vadapalli@ti.com>
commit 9d76be5828be44ed7a104cc21b4f875be4a63322 upstream.
In preparation for disabling "serdes_wiz0" and "serdes_wiz1" device-tree
nodes in the SoC file, enable them in the board file. The motivation for
this change is that of following the existing convention of disabling
nodes in the SoC file and only enabling the required ones in the board
file.
Fixes: 485705df5d5f ("arm64: dts: ti: k3-j722s: Enable PCIe and USB support on J722S-EVM")
Cc: stable@vger.kernel.org
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250417123246.2733923-2-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -843,6 +843,10 @@
<J722S_SERDES1_LANE0_PCIE0_LANE0>;
};
+&serdes_wiz0 {
+ status = "okay";
+};
+
&serdes0 {
status = "okay";
serdes0_usb_link: phy@0 {
@@ -854,6 +858,10 @@
};
};
+&serdes_wiz1 {
+ status = "okay";
+};
+
&serdes1 {
status = "okay";
serdes1_pcie_link: phy@0 {
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 39/49] arm64: dts: ti: k3-j722s-main: Disable "serdes_wiz0" and "serdes_wiz1"
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (37 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 38/49] arm64: dts: ti: k3-j722s-evm: Enable "serdes_wiz0" and "serdes_wiz1" Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 40/49] arm64: dts: ti: k3-j784s4-j742s2-main-common: Fix length of serdes_ln_ctrl Greg Kroah-Hartman
` (18 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Siddharth Vadapalli, Udit Kumar,
Nishanth Menon
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Siddharth Vadapalli <s-vadapalli@ti.com>
commit 320d8a84f6f045dc876d4c2983f9024c7ac9d6df upstream.
Since "serdes0" and "serdes1" which are the sub-nodes of "serdes_wiz0"
and "serdes_wiz1" respectively, have been disabled in the SoC file already,
and, given that these sub-nodes will only be enabled in a board file if the
board utilizes any of the SERDES instances and the peripherals bound to
them, we end up in a situation where the board file doesn't explicitly
disable "serdes_wiz0" and "serdes_wiz1". As a consequence of this, the
following errors show up when booting Linux:
wiz bus@f0000:phy@f000000: probe with driver wiz failed with error -12
...
wiz bus@f0000:phy@f010000: probe with driver wiz failed with error -12
To not only fix the above, but also, in order to follow the convention of
disabling device-tree nodes in the SoC file and enabling them in the board
files for those boards which require them, disable "serdes_wiz0" and
"serdes_wiz1" device-tree nodes.
Fixes: 628e0a0118e6 ("arm64: dts: ti: k3-j722s-main: Add SERDES and PCIe support")
Cc: stable@vger.kernel.org
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250417123246.2733923-3-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
@@ -32,6 +32,8 @@
assigned-clocks = <&k3_clks 279 1>;
assigned-clock-parents = <&k3_clks 279 5>;
+ status = "disabled";
+
serdes0: serdes@f000000 {
compatible = "ti,j721e-serdes-10g";
reg = <0x0f000000 0x00010000>;
@@ -70,6 +72,8 @@
assigned-clocks = <&k3_clks 280 1>;
assigned-clock-parents = <&k3_clks 280 5>;
+ status = "disabled";
+
serdes1: serdes@f010000 {
compatible = "ti,j721e-serdes-10g";
reg = <0x0f010000 0x00010000>;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 40/49] arm64: dts: ti: k3-j784s4-j742s2-main-common: Fix length of serdes_ln_ctrl
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (38 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 39/49] arm64: dts: ti: k3-j722s-main: Disable " Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 41/49] net_sched: hfsc: Address reentrant enqueue adding class to eltree twice Greg Kroah-Hartman
` (17 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Siddharth Vadapalli, Udit Kumar,
Nishanth Menon
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Siddharth Vadapalli <s-vadapalli@ti.com>
commit 3b62bd1fde50d54cc59015e14869e6cc3d6899e0 upstream.
Commit under Fixes corrected the "mux-reg-masks" property but did not
update the "length" field of the "reg" property to account for the
newly added register offsets which extend the region. Fix this.
Fixes: 38e7f9092efb ("arm64: dts: ti: k3-j784s4-j742s2-main-common: Fix serdes_ln_ctrl reg-masks")
Cc: stable@vger.kernel.org
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250423151612.48848-1-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
@@ -77,7 +77,7 @@
serdes_ln_ctrl: mux-controller@4080 {
compatible = "reg-mux";
- reg = <0x00004080 0x30>;
+ reg = <0x00004080 0x50>;
#mux-control-cells = <1>;
mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */
<0x8 0x3>, <0xc 0x3>, /* SERDES0 lane2/3 select */
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 41/49] net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (39 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 40/49] arm64: dts: ti: k3-j784s4-j742s2-main-common: Fix length of serdes_ln_ctrl Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 42/49] perf/arm-cmn: Fix REQ2/SNP2 mixup Greg Kroah-Hartman
` (16 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Savino Dicanosa, William Liu,
Jamal Hadi Salim, Victor Nogueira, Pedro Tammela, Paolo Abeni
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pedro Tammela <pctammela@mojatatu.com>
commit ac9fe7dd8e730a103ae4481147395cc73492d786 upstream.
Savino says:
"We are writing to report that this recent patch
(141d34391abbb315d68556b7c67ad97885407547) [1]
can be bypassed, and a UAF can still occur when HFSC is utilized with
NETEM.
The patch only checks the cl->cl_nactive field to determine whether
it is the first insertion or not [2], but this field is only
incremented by init_vf [3].
By using HFSC_RSC (which uses init_ed) [4], it is possible to bypass the
check and insert the class twice in the eltree.
Under normal conditions, this would lead to an infinite loop in
hfsc_dequeue for the reasons we already explained in this report [5].
However, if TBF is added as root qdisc and it is configured with a
very low rate,
it can be utilized to prevent packets from being dequeued.
This behavior can be exploited to perform subsequent insertions in the
HFSC eltree and cause a UAF."
To fix both the UAF and the infinite loop, with netem as an hfsc child,
check explicitly in hfsc_enqueue whether the class is already in the eltree
whenever the HFSC_RSC flag is set.
[1] https://web.git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=141d34391abbb315d68556b7c67ad97885407547
[2] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L1572
[3] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L677
[4] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L1574
[5] https://lore.kernel.org/netdev/8DuRWwfqjoRDLDmBMlIfbrsZg9Gx50DHJc1ilxsEBNe2D6NMoigR_eIRIG0LOjMc3r10nUUZtArXx4oZBIdUfZQrwjcQhdinnMis_0G7VEk=@willsroot.io/T/#u
Fixes: 37d9cf1a3ce3 ("sched: Fix detection of empty queues in child qdiscs")
Reported-by: Savino Dicanosa <savy@syst3mfailure.io>
Reported-by: William Liu <will@willsroot.io>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://patch.msgid.link/20250522181448.1439717-2-pctammela@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/sched/sch_hfsc.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/net/sched/sch_hfsc.c
+++ b/net/sched/sch_hfsc.c
@@ -175,6 +175,11 @@ struct hfsc_sched {
#define HT_INFINITY 0xffffffffffffffffULL /* infinite time value */
+static bool cl_in_el_or_vttree(struct hfsc_class *cl)
+{
+ return ((cl->cl_flags & HFSC_FSC) && cl->cl_nactive) ||
+ ((cl->cl_flags & HFSC_RSC) && !RB_EMPTY_NODE(&cl->el_node));
+}
/*
* eligible tree holds backlogged classes being sorted by their eligible times.
@@ -1040,6 +1045,8 @@ hfsc_change_class(struct Qdisc *sch, u32
if (cl == NULL)
return -ENOBUFS;
+ RB_CLEAR_NODE(&cl->el_node);
+
err = tcf_block_get(&cl->block, &cl->filter_list, sch, extack);
if (err) {
kfree(cl);
@@ -1572,7 +1579,7 @@ hfsc_enqueue(struct sk_buff *skb, struct
sch->qstats.backlog += len;
sch->q.qlen++;
- if (first && !cl->cl_nactive) {
+ if (first && !cl_in_el_or_vttree(cl)) {
if (cl->cl_flags & HFSC_RSC)
init_ed(cl, len);
if (cl->cl_flags & HFSC_FSC)
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 42/49] perf/arm-cmn: Fix REQ2/SNP2 mixup
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (40 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 41/49] net_sched: hfsc: Address reentrant enqueue adding class to eltree twice Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 43/49] perf/arm-cmn: Initialise cmn->cpu earlier Greg Kroah-Hartman
` (15 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Robin Murphy, Will Deacon
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Robin Murphy <robin.murphy@arm.com>
commit 11b0f576e0cbde6a12258f2af6753b17b8df342b upstream.
Somehow the encodings for REQ2/SNP2 channels in XP events
got mixed up... Unmix them.
CC: stable@vger.kernel.org
Fixes: 23760a014417 ("perf/arm-cmn: Add CMN-700 support")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/087023e9737ac93d7ec7a841da904758c254cb01.1746717400.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/perf/arm-cmn.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/perf/arm-cmn.c
+++ b/drivers/perf/arm-cmn.c
@@ -727,8 +727,8 @@ static umode_t arm_cmn_event_attr_is_vis
if ((chan == 5 && cmn->rsp_vc_num < 2) ||
(chan == 6 && cmn->dat_vc_num < 2) ||
- (chan == 7 && cmn->snp_vc_num < 2) ||
- (chan == 8 && cmn->req_vc_num < 2))
+ (chan == 7 && cmn->req_vc_num < 2) ||
+ (chan == 8 && cmn->snp_vc_num < 2))
return 0;
}
@@ -882,8 +882,8 @@ static umode_t arm_cmn_event_attr_is_vis
_CMN_EVENT_XP(pub_##_name, (_event) | (4 << 5)), \
_CMN_EVENT_XP(rsp2_##_name, (_event) | (5 << 5)), \
_CMN_EVENT_XP(dat2_##_name, (_event) | (6 << 5)), \
- _CMN_EVENT_XP(snp2_##_name, (_event) | (7 << 5)), \
- _CMN_EVENT_XP(req2_##_name, (_event) | (8 << 5))
+ _CMN_EVENT_XP(req2_##_name, (_event) | (7 << 5)), \
+ _CMN_EVENT_XP(snp2_##_name, (_event) | (8 << 5))
#define CMN_EVENT_XP_DAT(_name, _event) \
_CMN_EVENT_XP_PORT(dat_##_name, (_event) | (3 << 5)), \
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 43/49] perf/arm-cmn: Initialise cmn->cpu earlier
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (41 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 42/49] perf/arm-cmn: Fix REQ2/SNP2 mixup Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 44/49] perf/arm-cmn: Add CMN S3 ACPI binding Greg Kroah-Hartman
` (14 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Robin Murphy, Ilkka Koskinen,
Will Deacon
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Robin Murphy <robin.murphy@arm.com>
commit 597704e201068db3d104de3c7a4d447ff8209127 upstream.
For all the complexity of handling affinity for CPU hotplug, what we've
apparently managed to overlook is that arm_cmn_init_irqs() has in fact
always been setting the *initial* affinity of all IRQs to CPU 0, not the
CPU we subsequently choose for event scheduling. Oh dear.
Cc: stable@vger.kernel.org
Fixes: 0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/b12fccba6b5b4d2674944f59e4daad91cd63420b.1747069914.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/perf/arm-cmn.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/perf/arm-cmn.c
+++ b/drivers/perf/arm-cmn.c
@@ -2558,6 +2558,7 @@ static int arm_cmn_probe(struct platform
cmn->dev = &pdev->dev;
cmn->part = (unsigned long)device_get_match_data(cmn->dev);
+ cmn->cpu = cpumask_local_spread(0, dev_to_node(cmn->dev));
platform_set_drvdata(pdev, cmn);
if (cmn->part == PART_CMN600 && has_acpi_companion(cmn->dev)) {
@@ -2585,7 +2586,6 @@ static int arm_cmn_probe(struct platform
if (err)
return err;
- cmn->cpu = cpumask_local_spread(0, dev_to_node(cmn->dev));
cmn->pmu = (struct pmu) {
.module = THIS_MODULE,
.parent = cmn->dev,
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 44/49] perf/arm-cmn: Add CMN S3 ACPI binding
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (42 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 43/49] perf/arm-cmn: Initialise cmn->cpu earlier Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 45/49] pidfs: move O_RDWR into pidfs_alloc_file() Greg Kroah-Hartman
` (13 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Robin Murphy, Will Deacon
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Robin Murphy <robin.murphy@arm.com>
commit 8c138a189f6db295ceb32258d46ac061df0823e5 upstream.
An ACPI binding for CMN S3 was not yet finalised when the driver support
was originally written, but v1.2 of DEN0093 "ACPI for Arm Components"
has at last been published; support ACPI systems using the proper HID.
Cc: stable@vger.kernel.org
Fixes: 0dc2f4963f7e ("perf/arm-cmn: Support CMN S3")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/7dafe147f186423020af49d7037552ee59c60e97.1747652164.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/perf/arm-cmn.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/perf/arm-cmn.c
+++ b/drivers/perf/arm-cmn.c
@@ -2651,6 +2651,7 @@ static const struct acpi_device_id arm_c
{ "ARMHC600", PART_CMN600 },
{ "ARMHC650" },
{ "ARMHC700" },
+ { "ARMHC003" },
{}
};
MODULE_DEVICE_TABLE(acpi, arm_cmn_acpi_match);
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 45/49] pidfs: move O_RDWR into pidfs_alloc_file()
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (43 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 44/49] perf/arm-cmn: Add CMN S3 ACPI binding Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 46/49] coredump: fix error handling for replace_fd() Greg Kroah-Hartman
` (12 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Luca Boccassi, Oleg Nesterov,
Christian Brauner
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian Brauner <brauner@kernel.org>
commit c57f07b235871c9e5bffaccd458dca2d9a62b164 upstream.
Since all pidfds must be O_RDWR currently enfore that directly in the
file allocation function itself instead of letting callers specify it.
Link: https://lore.kernel.org/20250414-work-coredump-v2-1-685bf231f828@kernel.org
Tested-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/pidfs.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/pidfs.c
+++ b/fs/pidfs.c
@@ -888,6 +888,7 @@ struct file *pidfs_alloc_file(struct pid
return ERR_PTR(-ESRCH);
flags &= ~PIDFD_CLONE;
+ flags |= O_RDWR;
pidfd_file = dentry_open(&path, flags, current_cred());
/* Raise PIDFD_THREAD explicitly as do_dentry_open() strips it. */
if (!IS_ERR(pidfd_file))
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 46/49] coredump: fix error handling for replace_fd()
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (44 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 45/49] pidfs: move O_RDWR into pidfs_alloc_file() Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 47/49] coredump: hand a pidfd to the usermode coredump helper Greg Kroah-Hartman
` (11 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Luca Boccassi, Oleg Nesterov,
Christian Brauner
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian Brauner <brauner@kernel.org>
commit 95c5f43181fe9c1b5e5a4bd3281c857a5259991f upstream.
The replace_fd() helper returns the file descriptor number on success
and a negative error code on failure. The current error handling in
umh_pipe_setup() only works because the file descriptor that is replaced
is zero but that's pretty volatile. Explicitly check for a negative
error code.
Link: https://lore.kernel.org/20250414-work-coredump-v2-2-685bf231f828@kernel.org
Tested-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/coredump.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -507,7 +507,9 @@ static int umh_pipe_setup(struct subproc
{
struct file *files[2];
struct coredump_params *cp = (struct coredump_params *)info->data;
- int err = create_pipe_files(files, 0);
+ int err;
+
+ err = create_pipe_files(files, 0);
if (err)
return err;
@@ -515,10 +517,13 @@ static int umh_pipe_setup(struct subproc
err = replace_fd(0, files[0], 0);
fput(files[0]);
+ if (err < 0)
+ return err;
+
/* and disallow core files too */
current->signal->rlim[RLIMIT_CORE] = (struct rlimit){1, 1};
- return err;
+ return 0;
}
void do_coredump(const kernel_siginfo_t *siginfo)
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 47/49] coredump: hand a pidfd to the usermode coredump helper
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (45 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 46/49] coredump: fix error handling for replace_fd() Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 48/49] iommu: Avoid introducing more races Greg Kroah-Hartman
` (10 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Luca Boccassi, Oleg Nesterov,
Christian Brauner
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian Brauner <brauner@kernel.org>
commit b5325b2a270fcaf7b2a9a0f23d422ca8a5a8bdea upstream.
Give userspace a way to instruct the kernel to install a pidfd into the
usermode helper process. This makes coredump handling a lot more
reliable for userspace. In parallel with this commit we already have
systemd adding support for this in [1].
We create a pidfs file for the coredumping process when we process the
corename pattern. When the usermode helper process is forked we then
install the pidfs file as file descriptor three into the usermode
helpers file descriptor table so it's available to the exec'd program.
Since usermode helpers are either children of the system_unbound_wq
workqueue or kthreadd we know that the file descriptor table is empty
and can thus always use three as the file descriptor number.
Note, that we'll install a pidfd for the thread-group leader even if a
subthread is calling do_coredump(). We know that task linkage hasn't
been removed due to delay_group_leader() and even if this @current isn't
the actual thread-group leader we know that the thread-group leader
cannot be reaped until @current has exited.
Link: https://github.com/systemd/systemd/pull/37125 [1]
Link: https://lore.kernel.org/20250414-work-coredump-v2-3-685bf231f828@kernel.org
Tested-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/coredump.c | 56 +++++++++++++++++++++++++++++++++++++++++++----
include/linux/coredump.h | 1
2 files changed, 53 insertions(+), 4 deletions(-)
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -43,6 +43,8 @@
#include <linux/timekeeping.h>
#include <linux/sysctl.h>
#include <linux/elf.h>
+#include <linux/pidfs.h>
+#include <uapi/linux/pidfd.h>
#include <linux/uaccess.h>
#include <asm/mmu_context.h>
@@ -60,6 +62,12 @@ static void free_vma_snapshot(struct cor
#define CORE_FILE_NOTE_SIZE_DEFAULT (4*1024*1024)
/* Define a reasonable max cap */
#define CORE_FILE_NOTE_SIZE_MAX (16*1024*1024)
+/*
+ * File descriptor number for the pidfd for the thread-group leader of
+ * the coredumping task installed into the usermode helper's file
+ * descriptor table.
+ */
+#define COREDUMP_PIDFD_NUMBER 3
static int core_uses_pid;
static unsigned int core_pipe_limit;
@@ -339,6 +347,27 @@ static int format_corename(struct core_n
case 'C':
err = cn_printf(cn, "%d", cprm->cpu);
break;
+ /* pidfd number */
+ case 'F': {
+ /*
+ * Installing a pidfd only makes sense if
+ * we actually spawn a usermode helper.
+ */
+ if (!ispipe)
+ break;
+
+ /*
+ * Note that we'll install a pidfd for the
+ * thread-group leader. We know that task
+ * linkage hasn't been removed yet and even if
+ * this @current isn't the actual thread-group
+ * leader we know that the thread-group leader
+ * cannot be reaped until @current has exited.
+ */
+ cprm->pid = task_tgid(current);
+ err = cn_printf(cn, "%d", COREDUMP_PIDFD_NUMBER);
+ break;
+ }
default:
break;
}
@@ -493,7 +522,7 @@ static void wait_for_dump_helpers(struct
}
/*
- * umh_pipe_setup
+ * umh_coredump_setup
* helper function to customize the process used
* to collect the core in userspace. Specifically
* it sets up a pipe and installs it as fd 0 (stdin)
@@ -503,12 +532,31 @@ static void wait_for_dump_helpers(struct
* is a special value that we use to trap recursive
* core dumps
*/
-static int umh_pipe_setup(struct subprocess_info *info, struct cred *new)
+static int umh_coredump_setup(struct subprocess_info *info, struct cred *new)
{
struct file *files[2];
struct coredump_params *cp = (struct coredump_params *)info->data;
int err;
+ if (cp->pid) {
+ struct file *pidfs_file __free(fput) = NULL;
+
+ pidfs_file = pidfs_alloc_file(cp->pid, 0);
+ if (IS_ERR(pidfs_file))
+ return PTR_ERR(pidfs_file);
+
+ /*
+ * Usermode helpers are childen of either
+ * system_unbound_wq or of kthreadd. So we know that
+ * we're starting off with a clean file descriptor
+ * table. So we should always be able to use
+ * COREDUMP_PIDFD_NUMBER as our file descriptor value.
+ */
+ err = replace_fd(COREDUMP_PIDFD_NUMBER, pidfs_file, 0);
+ if (err < 0)
+ return err;
+ }
+
err = create_pipe_files(files, 0);
if (err)
return err;
@@ -598,7 +646,7 @@ void do_coredump(const kernel_siginfo_t
}
if (cprm.limit == 1) {
- /* See umh_pipe_setup() which sets RLIMIT_CORE = 1.
+ /* See umh_coredump_setup() which sets RLIMIT_CORE = 1.
*
* Normally core limits are irrelevant to pipes, since
* we're not writing to the file system, but we use
@@ -637,7 +685,7 @@ void do_coredump(const kernel_siginfo_t
retval = -ENOMEM;
sub_info = call_usermodehelper_setup(helper_argv[0],
helper_argv, NULL, GFP_KERNEL,
- umh_pipe_setup, NULL, &cprm);
+ umh_coredump_setup, NULL, &cprm);
if (sub_info)
retval = call_usermodehelper_exec(sub_info,
UMH_WAIT_EXEC);
--- a/include/linux/coredump.h
+++ b/include/linux/coredump.h
@@ -28,6 +28,7 @@ struct coredump_params {
int vma_count;
size_t vma_data_size;
struct core_vma_metadata *vma_meta;
+ struct pid *pid;
};
extern unsigned int core_file_note_size_limit;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 48/49] iommu: Avoid introducing more races
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (46 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 47/49] coredump: hand a pidfd to the usermode coredump helper Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 13:47 ` [PATCH 6.15 49/49] iommu: Handle yet another race around registration Greg Kroah-Hartman
` (9 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jason Gunthorpe, Robin Murphy,
Joerg Roedel
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Robin Murphy <robin.murphy@arm.com>
commit 0c8e9c148e29a983e67060fb4944a8ca79d4362a upstream.
Although the lock-juggling is only a temporary workaround, we don't want
it to make things avoidably worse. Jason was right to be nervous, since
bus_iommu_probe() doesn't care *which* IOMMU instance it's probing for,
so it probably is possible for one walk to finish a probe which a
different walk started, thus we do want to check for that.
Also there's no need to drop the lock just to have of_iommu_configure()
do nothing when a fwspec already exists; check that directly and avoid
opening a window at all in that (still somewhat likely) case.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/09d901ad11b3a410fbb6e27f7d04ad4609c3fe4a.1741706365.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iommu/iommu.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -422,13 +422,15 @@ static int iommu_init_device(struct devi
* is buried in the bus dma_configure path. Properly unpicking that is
* still a big job, so for now just invoke the whole thing. The device
* already having a driver bound means dma_configure has already run and
- * either found no IOMMU to wait for, or we're in its replay call right
- * now, so either way there's no point calling it again.
+ * found no IOMMU to wait for, so there's no point calling it again.
*/
- if (!dev->driver && dev->bus->dma_configure) {
+ if (!dev->iommu->fwspec && !dev->driver && dev->bus->dma_configure) {
mutex_unlock(&iommu_probe_device_lock);
dev->bus->dma_configure(dev);
mutex_lock(&iommu_probe_device_lock);
+ /* If another instance finished the job for us, skip it */
+ if (!dev->iommu || dev->iommu_group)
+ return -ENODEV;
}
/*
* At this point, relevant devices either now have a fwspec which will
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 6.15 49/49] iommu: Handle yet another race around registration
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (47 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 48/49] iommu: Avoid introducing more races Greg Kroah-Hartman
@ 2025-06-02 13:47 ` Greg Kroah-Hartman
2025-06-02 18:16 ` [PATCH 6.15 00/49] 6.15.1-rc1 review Florian Fainelli
` (8 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2025-06-02 13:47 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Johan Hovold, Robin Murphy,
Joerg Roedel
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Robin Murphy <robin.murphy@arm.com>
commit da33e87bd2bfc63531cf7448a3cd7a3d42182f08 upstream.
Next up on our list of race windows to close is another one during
iommu_device_register() - it's now OK again for multiple instances to
run their bus_iommu_probe() in parallel, but an iommu_probe_device() can
still also race against a running bus_iommu_probe(). As Johan has
managed to prove, this has now become a lot more visible on DT platforms
wth driver_async_probe where a client driver is attempting to probe in
parallel with its IOMMU driver - although commit b46064a18810 ("iommu:
Handle race with default domain setup") resolves this from the client
driver's point of view, this isn't before of_iommu_configure() has had
the chance to attempt to "replay" a probe that the bus walk hasn't even
tried yet, and so still cause the out-of-order group allocation
behaviour that we're trying to clean up (and now warning about).
The most reliable thing to do here is to explicitly keep track of the
"iommu_device_register() is still running" state, so we can then
special-case the ops lookup for the replay path (based on dev->iommu
again) to let that think it's still waiting for the IOMMU driver to
appear at all. This still leaves the longstanding theoretical case of
iommu_bus_notifier() being triggered during bus_iommu_probe(), but it's
not so simple to defer a notifier, and nobody's ever reported that being
a visible issue, so let's quietly kick that can down the road for now...
Reported-by: Johan Hovold <johan@kernel.org>
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/88d54c1b48fed8279aa47d30f3d75173685bb26a.1745516488.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iommu/iommu.c | 26 ++++++++++++++++++--------
include/linux/iommu.h | 2 ++
2 files changed, 20 insertions(+), 8 deletions(-)
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -277,6 +277,8 @@ int iommu_device_register(struct iommu_d
err = bus_iommu_probe(iommu_buses[i]);
if (err)
iommu_device_unregister(iommu);
+ else
+ WRITE_ONCE(iommu->ready, true);
return err;
}
EXPORT_SYMBOL_GPL(iommu_device_register);
@@ -2832,31 +2834,39 @@ bool iommu_default_passthrough(void)
}
EXPORT_SYMBOL_GPL(iommu_default_passthrough);
-const struct iommu_ops *iommu_ops_from_fwnode(const struct fwnode_handle *fwnode)
+static const struct iommu_device *iommu_from_fwnode(const struct fwnode_handle *fwnode)
{
- const struct iommu_ops *ops = NULL;
- struct iommu_device *iommu;
+ const struct iommu_device *iommu, *ret = NULL;
spin_lock(&iommu_device_lock);
list_for_each_entry(iommu, &iommu_device_list, list)
if (iommu->fwnode == fwnode) {
- ops = iommu->ops;
+ ret = iommu;
break;
}
spin_unlock(&iommu_device_lock);
- return ops;
+ return ret;
+}
+
+const struct iommu_ops *iommu_ops_from_fwnode(const struct fwnode_handle *fwnode)
+{
+ const struct iommu_device *iommu = iommu_from_fwnode(fwnode);
+
+ return iommu ? iommu->ops : NULL;
}
int iommu_fwspec_init(struct device *dev, struct fwnode_handle *iommu_fwnode)
{
- const struct iommu_ops *ops = iommu_ops_from_fwnode(iommu_fwnode);
+ const struct iommu_device *iommu = iommu_from_fwnode(iommu_fwnode);
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
- if (!ops)
+ if (!iommu)
return driver_deferred_probe_check_state(dev);
+ if (!dev->iommu && !READ_ONCE(iommu->ready))
+ return -EPROBE_DEFER;
if (fwspec)
- return ops == iommu_fwspec_ops(fwspec) ? 0 : -EINVAL;
+ return iommu->ops == iommu_fwspec_ops(fwspec) ? 0 : -EINVAL;
if (!dev_iommu_get(dev))
return -ENOMEM;
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -750,6 +750,7 @@ struct iommu_domain_ops {
* @dev: struct device for sysfs handling
* @singleton_group: Used internally for drivers that have only one group
* @max_pasids: number of supported PASIDs
+ * @ready: set once iommu_device_register() has completed successfully
*/
struct iommu_device {
struct list_head list;
@@ -758,6 +759,7 @@ struct iommu_device {
struct device *dev;
struct iommu_group *singleton_group;
u32 max_pasids;
+ bool ready;
};
/**
^ permalink raw reply [flat|nested] 59+ messages in thread* Re: [PATCH 6.15 00/49] 6.15.1-rc1 review
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (48 preceding siblings ...)
2025-06-02 13:47 ` [PATCH 6.15 49/49] iommu: Handle yet another race around registration Greg Kroah-Hartman
@ 2025-06-02 18:16 ` Florian Fainelli
2025-06-02 19:51 ` Peter Schneider
` (7 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Florian Fainelli @ 2025-06-02 18:16 UTC (permalink / raw)
To: Greg Kroah-Hartman, stable
Cc: patches, linux-kernel, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, sudipm.mukherjee, srw, rwarsow,
conor, hargar, broonie
On 6/2/25 06:46, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.15.1 release.
> There are 49 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 04 Jun 2025 13:42:20 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.15.1-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on
BMIPS_GENERIC:
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
--
Florian
^ permalink raw reply [flat|nested] 59+ messages in thread* Re: [PATCH 6.15 00/49] 6.15.1-rc1 review
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (49 preceding siblings ...)
2025-06-02 18:16 ` [PATCH 6.15 00/49] 6.15.1-rc1 review Florian Fainelli
@ 2025-06-02 19:51 ` Peter Schneider
2025-06-03 7:22 ` Ron Economos
` (6 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Peter Schneider @ 2025-06-02 19:51 UTC (permalink / raw)
To: Greg Kroah-Hartman, stable
Cc: patches, linux-kernel, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee, srw,
rwarsow, conor, hargar, broonie
Am 02.06.2025 um 15:46 schrieb Greg Kroah-Hartman:
> This is the start of the stable review cycle for the 6.15.1 release.
> There are 49 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
Builds, boots and works on my 2-socket Ivy Bridge Xeon E5-2697 v2 server. No dmesg
oddities or regressions found.
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Beste Grüße,
Peter Schneider
--
Climb the mountain not to plant your flag, but to embrace the challenge,
enjoy the air and behold the view. Climb it so you can see the world,
not so the world can see you. -- David McCullough Jr.
OpenPGP: 0xA3828BD796CCE11A8CADE8866E3A92C92C3FF244
Download: https://www.peters-netzplatz.de/download/pschneider1968_pub.asc
https://keys.mailvelope.com/pks/lookup?op=get&search=pschneider1968@googlemail.com
https://keys.mailvelope.com/pks/lookup?op=get&search=pschneider1968@gmail.com
^ permalink raw reply [flat|nested] 59+ messages in thread* Re: [PATCH 6.15 00/49] 6.15.1-rc1 review
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (50 preceding siblings ...)
2025-06-02 19:51 ` Peter Schneider
@ 2025-06-03 7:22 ` Ron Economos
2025-06-03 9:23 ` Mark Brown
` (5 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Ron Economos @ 2025-06-03 7:22 UTC (permalink / raw)
To: Greg Kroah-Hartman, stable
Cc: patches, linux-kernel, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee, srw,
rwarsow, conor, hargar, broonie
On 6/2/25 06:46, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.15.1 release.
> There are 49 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 04 Jun 2025 13:42:20 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.15.1-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Built and booted successfully on RISC-V RV64 (HiFive Unmatched).
Tested-by: Ron Economos <re@w6rz.net>
^ permalink raw reply [flat|nested] 59+ messages in thread* Re: [PATCH 6.15 00/49] 6.15.1-rc1 review
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (51 preceding siblings ...)
2025-06-03 7:22 ` Ron Economos
@ 2025-06-03 9:23 ` Mark Brown
2025-06-03 10:10 ` Christian Heusel
` (4 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Mark Brown @ 2025-06-03 9:23 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: stable, patches, linux-kernel, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, hargar
[-- Attachment #1: Type: text/plain, Size: 344 bytes --]
On Mon, Jun 02, 2025 at 03:46:52PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.15.1 release.
> There are 49 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
Tested-by: Mark Brown <broonie@kernel.org>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 59+ messages in thread* Re: [PATCH 6.15 00/49] 6.15.1-rc1 review
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (52 preceding siblings ...)
2025-06-03 9:23 ` Mark Brown
@ 2025-06-03 10:10 ` Christian Heusel
2025-06-03 11:40 ` Takeshi Ogasawara
` (3 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Christian Heusel @ 2025-06-03 10:10 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: stable, patches, linux-kernel, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, hargar, broonie
[-- Attachment #1: Type: text/plain, Size: 592 bytes --]
On 25/06/02 03:46PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.15.1 release.
> There are 49 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 04 Jun 2025 13:42:20 +0000.
> Anything received after that time might be too late.
Tested-by: Christian Heusel <christian@heusel.eu>
Tested on a ThinkPad E14 Gen 3 with a AMD Ryzen 5 5500U CPU and on the
Steam Deck (LCD variant) aswell as a Framework Desktop.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 59+ messages in thread* Re: [PATCH 6.15 00/49] 6.15.1-rc1 review
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (53 preceding siblings ...)
2025-06-03 10:10 ` Christian Heusel
@ 2025-06-03 11:40 ` Takeshi Ogasawara
2025-06-03 12:14 ` Naresh Kamboju
` (2 subsequent siblings)
57 siblings, 0 replies; 59+ messages in thread
From: Takeshi Ogasawara @ 2025-06-03 11:40 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: stable, patches, linux-kernel, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, hargar, broonie
Hi Greg
On Mon, Jun 2, 2025 at 10:49 PM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.15.1 release.
> There are 49 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 04 Jun 2025 13:42:20 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.15.1-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
6.15.1-rc1 tested.
Build successfully completed.
Boot successfully completed.
No dmesg regressions.
Video output normal.
Sound output normal.
Lenovo ThinkPad X1 Carbon Gen10(Intel i7-1260P(x86_64) arch linux)
[ 0.000000] Linux version 6.15.1-rc1rv-g86677b94d603
(takeshi@ThinkPadX1Gen10J0764) (gcc (GCC) 15.1.1 20250425, GNU ld (GNU
Binutils) 2.44.0) #1 SMP PREEMPT_DYNAMIC Tue Jun 3 20:09:59 JST 2025
Thanks
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
^ permalink raw reply [flat|nested] 59+ messages in thread* Re: [PATCH 6.15 00/49] 6.15.1-rc1 review
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (54 preceding siblings ...)
2025-06-03 11:40 ` Takeshi Ogasawara
@ 2025-06-03 12:14 ` Naresh Kamboju
2025-06-03 17:10 ` Shuah Khan
2025-06-04 9:41 ` Jon Hunter
57 siblings, 0 replies; 59+ messages in thread
From: Naresh Kamboju @ 2025-06-03 12:14 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: stable, patches, linux-kernel, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, hargar, broonie
On Mon, 2 Jun 2025 at 19:19, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.15.1 release.
> There are 49 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 04 Jun 2025 13:42:20 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.15.1-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
## Build
* kernel: 6.15.1-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git commit: 86677b94d603c727f6b88b4b77bfce2601aa4465
* git describe: v6.15-50-g86677b94d603
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.15.y/build/v6.15-50-g86677b94d603
## Test Regressions (compared to v6.15)
## Metric Regressions (compared to v6.15)
## Test Fixes (compared to v6.15)
## Metric Fixes (compared to v6.15)
## Test result summary
total: 321892, pass: 296354, fail: 6075, skip: 19463, xfail: 0
## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 139 total, 136 passed, 3 failed
* arm64: 57 total, 55 passed, 1 failed, 1 skipped
* i386: 18 total, 18 passed, 0 failed
* mips: 34 total, 27 passed, 7 failed
* parisc: 4 total, 4 passed, 0 failed
* powerpc: 40 total, 39 passed, 1 failed
* riscv: 25 total, 25 passed, 0 failed
* s390: 22 total, 22 passed, 0 failed
* sh: 5 total, 5 passed, 0 failed
* sparc: 4 total, 3 passed, 1 failed
* x86_64: 49 total, 46 passed, 3 failed
## Test suites summary
* boot
* commands
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-exec
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-kcmp
* kselftest-kvm
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-mincore
* kselftest-mm
* kselftest-mqueue
* kselftest-net
* kselftest-net-mptcp
* kselftest-openat2
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-rust
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-tc-testing
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user_events
* kselftest-vDSO
* kselftest-x86
* kunit
* kvm-unit-tests
* lava
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-build-clang
* log-parser-build-gcc
* log-parser-test
* ltp-capability
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-hugetlb
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* modules
* perf
* rcutor[
* rcutorture
* rt-tests-cyclicdeadline
* rt-tests-pi-stress
* rt-tests-pmqtest
* rt-tests-rt-migrate-test
* rt-tests-signaltest
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 59+ messages in thread* Re: [PATCH 6.15 00/49] 6.15.1-rc1 review
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (55 preceding siblings ...)
2025-06-03 12:14 ` Naresh Kamboju
@ 2025-06-03 17:10 ` Shuah Khan
2025-06-04 9:41 ` Jon Hunter
57 siblings, 0 replies; 59+ messages in thread
From: Shuah Khan @ 2025-06-03 17:10 UTC (permalink / raw)
To: Greg Kroah-Hartman, stable
Cc: patches, linux-kernel, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee, srw,
rwarsow, conor, hargar, broonie, Shuah Khan
On 6/2/25 07:46, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.15.1 release.
> There are 49 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 04 Jun 2025 13:42:20 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.15.1-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
thanks,
-- Shuah
^ permalink raw reply [flat|nested] 59+ messages in thread* Re: [PATCH 6.15 00/49] 6.15.1-rc1 review
2025-06-02 13:46 [PATCH 6.15 00/49] 6.15.1-rc1 review Greg Kroah-Hartman
` (56 preceding siblings ...)
2025-06-03 17:10 ` Shuah Khan
@ 2025-06-04 9:41 ` Jon Hunter
57 siblings, 0 replies; 59+ messages in thread
From: Jon Hunter @ 2025-06-04 9:41 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Greg Kroah-Hartman, patches, linux-kernel, torvalds, akpm, linux,
shuah, patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, hargar, broonie,
linux-tegra, stable
On Mon, 02 Jun 2025 15:46:52 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.15.1 release.
> There are 49 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 04 Jun 2025 13:42:20 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.15.1-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests passing for Tegra ...
Test results for stable-v6.15:
10 builds: 10 pass, 0 fail
28 boots: 28 pass, 0 fail
116 tests: 116 pass, 0 fail
Linux version: 6.15.1-rc1-g86677b94d603
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra186-p3509-0000+p3636-0001, tegra194-p2972-0000,
tegra194-p3509-0000+p3668-0000, tegra20-ventana,
tegra210-p2371-2180, tegra210-p3450-0000,
tegra30-cardhu-a04
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Jon
^ permalink raw reply [flat|nested] 59+ messages in thread