From: Sasha Levin <sashal@kernel.org>
To: patches@lists.linux.dev, stable@vger.kernel.org
Cc: Sriram R <quic_srirrama@quicinc.com>,
Nithyanantham Paramasivam <quic_nithp@quicinc.com>,
Vasanthakumar Thiagarajan
<vasanthakumar.thiagarajan@oss.qualcomm.com>,
Jeff Johnson <jeff.johnson@oss.qualcomm.com>,
Sasha Levin <sashal@kernel.org>,
jjohnson@kernel.org, linux-wireless@vger.kernel.org,
ath12k@lists.infradead.org
Subject: [PATCH AUTOSEL 6.15 112/118] wifi: ath12k: Fix the enabling of REO queue lookup table feature
Date: Tue, 3 Jun 2025 20:50:43 -0400 [thread overview]
Message-ID: <20250604005049.4147522-112-sashal@kernel.org> (raw)
In-Reply-To: <20250604005049.4147522-1-sashal@kernel.org>
From: Sriram R <quic_srirrama@quicinc.com>
[ Upstream commit 0bbcd42b15fa730f393a01bc818802d9f0b04197 ]
Instead of storing the REO queue address inside peer entries, REO
hardware module prefers them to be stored in SRAM which could be
directly accessed by REO using peer_ID/TID based lookup table
mechanism.
Fix the enabling of the REO queue lookup table(LUT) feature by
configuring the LUT address information in the REO hardware register
and setting the host service flags.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Nithyanantham Paramasivam <quic_nithp@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250402152529.1649402-2-quic_nithp@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
**YES** This commit should be backported to stable kernel trees. Here's
my detailed analysis: ## This is a Clear Bug Fix, Not a Feature
Implementation ### Evidence from Code Analysis: **1. Infrastructure
Already Existed:** - The `reoq_lut_support` field was already defined
and set to `true` for QCN9274 hardware in `hw.c` - Data structures for
`dp->reoq_lut` and `dp->ml_reoq_lut` were already present in `dp.h` -
Register definitions like `HAL_REO1_QDESC_LUT_BASE0/1` and
`HAL_REO_QDESC_ADDR_READ_LUT_ENABLE` were already defined - Memory
allocation code for these structures already existed **2. Specific
Issues Being Fixed:** **Missing Hardware Register Programming:** The key
fix is in `ath12k_dp_reoq_lut_setup()` where it adds proper register
configuration: ```c ath12k_hif_write32(ab, HAL_SEQ_WCSS_UMAC_REO_REG +
HAL_REO1_QDESC_LUT_BASE0(ab), dp->reoq_lut.paddr >> 8);
ath12k_hif_write32(ab, HAL_SEQ_WCSS_UMAC_REO_REG +
HAL_REO1_QDESC_ADDR(ab), val | HAL_REO_QDESC_ADDR_READ_LUT_ENABLE); ```
**Missing Host Service Flag:** The WMI initialization was missing the
flag to inform firmware: ```c if (ab->hw_params->reoq_lut_support)
wmi_cfg->host_service_flags |= cpu_to_le32(1 <<
WMI_RSRC_CFG_HOST_SVC_FLAG_REO_QREF_SUPPORT_BIT); ``` **3. Memory
Alignment Fix:** The changes to use `vaddr_unaligned`/`paddr_unaligned`
with `PTR_ALIGN()` fix a critical hardware requirement where the LUT
must be 256-byte aligned (`HAL_REO_QLUT_ADDR_ALIGN`). **4. Runtime Logic
Fix:** In `dp_rx.c`, the code now correctly chooses between peer
metadata and physical address based on `reoq_lut_support`: ```c if
(ab->hw_params->reoq_lut_support) { reo_ent_ring->queue_addr_lo =
reo_dest_ring->rx_mpdu_info.peer_meta_data; } else {
reo_ent_ring->queue_addr_lo = cpu_to_le32(lower_32_bits(rx_tid->paddr));
} ``` ### Why This Qualifies for Backporting: 1. **Important Bugfix:**
The REO lookup table feature is critical for WiFi performance - it
allows hardware to directly access queue descriptors instead of storing
them in peer entries 2. **Small and Contained:** The changes are
localized to the ath12k driver and follow established patterns 3. **No
Architectural Changes:** This doesn't introduce new APIs or change
driver architecture 4. **Hardware-Specific:** Fixes functionality that
was supposed to work on QCN9274 hardware but was silently broken 5.
**Minimal Risk:** The changes only affect the specific code path when
`reoq_lut_support` is enabled ### Comparison to Similar Commits: This is
very similar to the "YES" example (#2: "wifi: ath12k: fix firmware crash
during reo reinject") which also fixed REO-related functionality. Both
address hardware register programming issues in the REO subsystem that
could cause silent failures or crashes. The commit properly fixes broken
functionality that users of QCN9274 hardware would expect to work,
making it an excellent candidate for stable tree backporting.
drivers/net/wireless/ath/ath12k/dp.c | 77 +++++++++++++++++--------
drivers/net/wireless/ath/ath12k/dp.h | 5 +-
drivers/net/wireless/ath/ath12k/dp_rx.c | 10 +++-
drivers/net/wireless/ath/ath12k/hal.h | 6 ++
drivers/net/wireless/ath/ath12k/hw.c | 2 +
drivers/net/wireless/ath/ath12k/hw.h | 3 +
drivers/net/wireless/ath/ath12k/wmi.c | 8 ++-
drivers/net/wireless/ath/ath12k/wmi.h | 1 +
8 files changed, 83 insertions(+), 29 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/dp.c b/drivers/net/wireless/ath/ath12k/dp.c
index 50c36e6ea1027..34e1bd2934ce3 100644
--- a/drivers/net/wireless/ath/ath12k/dp.c
+++ b/drivers/net/wireless/ath/ath12k/dp.c
@@ -1261,22 +1261,24 @@ static void ath12k_dp_reoq_lut_cleanup(struct ath12k_base *ab)
if (!ab->hw_params->reoq_lut_support)
return;
- if (dp->reoq_lut.vaddr) {
+ if (dp->reoq_lut.vaddr_unaligned) {
ath12k_hif_write32(ab,
HAL_SEQ_WCSS_UMAC_REO_REG +
HAL_REO1_QDESC_LUT_BASE0(ab), 0);
- dma_free_coherent(ab->dev, DP_REOQ_LUT_SIZE,
- dp->reoq_lut.vaddr, dp->reoq_lut.paddr);
- dp->reoq_lut.vaddr = NULL;
+ dma_free_coherent(ab->dev, dp->reoq_lut.size,
+ dp->reoq_lut.vaddr_unaligned,
+ dp->reoq_lut.paddr_unaligned);
+ dp->reoq_lut.vaddr_unaligned = NULL;
}
- if (dp->ml_reoq_lut.vaddr) {
+ if (dp->ml_reoq_lut.vaddr_unaligned) {
ath12k_hif_write32(ab,
HAL_SEQ_WCSS_UMAC_REO_REG +
HAL_REO1_QDESC_LUT_BASE1(ab), 0);
- dma_free_coherent(ab->dev, DP_REOQ_LUT_SIZE,
- dp->ml_reoq_lut.vaddr, dp->ml_reoq_lut.paddr);
- dp->ml_reoq_lut.vaddr = NULL;
+ dma_free_coherent(ab->dev, dp->ml_reoq_lut.size,
+ dp->ml_reoq_lut.vaddr_unaligned,
+ dp->ml_reoq_lut.paddr_unaligned);
+ dp->ml_reoq_lut.vaddr_unaligned = NULL;
}
}
@@ -1608,39 +1610,66 @@ static int ath12k_dp_cc_init(struct ath12k_base *ab)
return ret;
}
+static int ath12k_dp_alloc_reoq_lut(struct ath12k_base *ab,
+ struct ath12k_reo_q_addr_lut *lut)
+{
+ lut->size = DP_REOQ_LUT_SIZE + HAL_REO_QLUT_ADDR_ALIGN - 1;
+ lut->vaddr_unaligned = dma_alloc_coherent(ab->dev, lut->size,
+ &lut->paddr_unaligned,
+ GFP_KERNEL | __GFP_ZERO);
+ if (!lut->vaddr_unaligned)
+ return -ENOMEM;
+
+ lut->vaddr = PTR_ALIGN(lut->vaddr_unaligned, HAL_REO_QLUT_ADDR_ALIGN);
+ lut->paddr = lut->paddr_unaligned +
+ ((unsigned long)lut->vaddr - (unsigned long)lut->vaddr_unaligned);
+ return 0;
+}
+
static int ath12k_dp_reoq_lut_setup(struct ath12k_base *ab)
{
struct ath12k_dp *dp = &ab->dp;
+ u32 val;
+ int ret;
if (!ab->hw_params->reoq_lut_support)
return 0;
- dp->reoq_lut.vaddr = dma_alloc_coherent(ab->dev,
- DP_REOQ_LUT_SIZE,
- &dp->reoq_lut.paddr,
- GFP_KERNEL | __GFP_ZERO);
- if (!dp->reoq_lut.vaddr) {
+ ret = ath12k_dp_alloc_reoq_lut(ab, &dp->reoq_lut);
+ if (ret) {
ath12k_warn(ab, "failed to allocate memory for reoq table");
- return -ENOMEM;
+ return ret;
}
- dp->ml_reoq_lut.vaddr = dma_alloc_coherent(ab->dev,
- DP_REOQ_LUT_SIZE,
- &dp->ml_reoq_lut.paddr,
- GFP_KERNEL | __GFP_ZERO);
- if (!dp->ml_reoq_lut.vaddr) {
+ ret = ath12k_dp_alloc_reoq_lut(ab, &dp->ml_reoq_lut);
+ if (ret) {
ath12k_warn(ab, "failed to allocate memory for ML reoq table");
- dma_free_coherent(ab->dev, DP_REOQ_LUT_SIZE,
- dp->reoq_lut.vaddr, dp->reoq_lut.paddr);
- dp->reoq_lut.vaddr = NULL;
- return -ENOMEM;
+ dma_free_coherent(ab->dev, dp->reoq_lut.size,
+ dp->reoq_lut.vaddr_unaligned,
+ dp->reoq_lut.paddr_unaligned);
+ dp->reoq_lut.vaddr_unaligned = NULL;
+ return ret;
}
+ /* Bits in the register have address [39:8] LUT base address to be
+ * allocated such that LSBs are assumed to be zero. Also, current
+ * design supports paddr upto 4 GB max hence it fits in 32 bit register only
+ */
+
ath12k_hif_write32(ab, HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO1_QDESC_LUT_BASE0(ab),
- dp->reoq_lut.paddr);
+ dp->reoq_lut.paddr >> 8);
+
ath12k_hif_write32(ab, HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO1_QDESC_LUT_BASE1(ab),
dp->ml_reoq_lut.paddr >> 8);
+ val = ath12k_hif_read32(ab, HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO1_QDESC_ADDR(ab));
+
+ ath12k_hif_write32(ab, HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO1_QDESC_ADDR(ab),
+ val | HAL_REO_QDESC_ADDR_READ_LUT_ENABLE);
+
+ ath12k_hif_write32(ab, HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO1_QDESC_MAX_PEERID(ab),
+ HAL_REO_QDESC_MAX_PEERID);
+
return 0;
}
diff --git a/drivers/net/wireless/ath/ath12k/dp.h b/drivers/net/wireless/ath/ath12k/dp.h
index 75435a931548c..dece8e5b0e86d 100644
--- a/drivers/net/wireless/ath/ath12k/dp.h
+++ b/drivers/net/wireless/ath/ath12k/dp.h
@@ -309,8 +309,11 @@ struct ath12k_reo_queue_ref {
} __packed;
struct ath12k_reo_q_addr_lut {
- dma_addr_t paddr;
+ u32 *vaddr_unaligned;
u32 *vaddr;
+ dma_addr_t paddr_unaligned;
+ dma_addr_t paddr;
+ u32 size;
};
struct ath12k_dp {
diff --git a/drivers/net/wireless/ath/ath12k/dp_rx.c b/drivers/net/wireless/ath/ath12k/dp_rx.c
index fd5e9ab9dbe81..9c1d9c966b671 100644
--- a/drivers/net/wireless/ath/ath12k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath12k/dp_rx.c
@@ -3247,8 +3247,14 @@ static int ath12k_dp_rx_h_defrag_reo_reinject(struct ath12k *ar,
reo_ent_ring->rx_mpdu_info.peer_meta_data =
reo_dest_ring->rx_mpdu_info.peer_meta_data;
- reo_ent_ring->queue_addr_lo = cpu_to_le32(lower_32_bits(rx_tid->paddr));
- queue_addr_hi = upper_32_bits(rx_tid->paddr);
+ if (ab->hw_params->reoq_lut_support) {
+ reo_ent_ring->queue_addr_lo = reo_dest_ring->rx_mpdu_info.peer_meta_data;
+ queue_addr_hi = 0;
+ } else {
+ reo_ent_ring->queue_addr_lo = cpu_to_le32(lower_32_bits(rx_tid->paddr));
+ queue_addr_hi = upper_32_bits(rx_tid->paddr);
+ }
+
reo_ent_ring->info0 = le32_encode_bits(queue_addr_hi,
HAL_REO_ENTR_RING_INFO0_QUEUE_ADDR_HI) |
le32_encode_bits(dst_ind,
diff --git a/drivers/net/wireless/ath/ath12k/hal.h b/drivers/net/wireless/ath/ath12k/hal.h
index 94e2e87359583..54a248d252415 100644
--- a/drivers/net/wireless/ath/ath12k/hal.h
+++ b/drivers/net/wireless/ath/ath12k/hal.h
@@ -21,6 +21,7 @@ struct ath12k_base;
#define HAL_MAX_AVAIL_BLK_RES 3
#define HAL_RING_BASE_ALIGN 8
+#define HAL_REO_QLUT_ADDR_ALIGN 256
#define HAL_WBM_IDLE_SCATTER_BUF_SIZE_MAX 32704
/* TODO: Check with hw team on the supported scatter buf size */
@@ -39,6 +40,7 @@ struct ath12k_base;
#define HAL_OFFSET_FROM_HP_TO_TP 4
#define HAL_SHADOW_REG(x) (HAL_SHADOW_BASE_ADDR + (4 * (x)))
+#define HAL_REO_QDESC_MAX_PEERID 8191
/* WCSS Relative address */
#define HAL_SEQ_WCSS_UMAC_OFFSET 0x00a00000
@@ -132,6 +134,8 @@ struct ath12k_base;
#define HAL_REO1_DEST_RING_CTRL_IX_1 0x00000008
#define HAL_REO1_DEST_RING_CTRL_IX_2 0x0000000c
#define HAL_REO1_DEST_RING_CTRL_IX_3 0x00000010
+#define HAL_REO1_QDESC_ADDR(ab) ((ab)->hw_params->regs->hal_reo1_qdesc_addr)
+#define HAL_REO1_QDESC_MAX_PEERID(ab) ((ab)->hw_params->regs->hal_reo1_qdesc_max_peerid)
#define HAL_REO1_SW_COOKIE_CFG0(ab) ((ab)->hw_params->regs->hal_reo1_sw_cookie_cfg0)
#define HAL_REO1_SW_COOKIE_CFG1(ab) ((ab)->hw_params->regs->hal_reo1_sw_cookie_cfg1)
#define HAL_REO1_QDESC_LUT_BASE0(ab) ((ab)->hw_params->regs->hal_reo1_qdesc_lut_base0)
@@ -319,6 +323,8 @@ struct ath12k_base;
#define HAL_REO1_SW_COOKIE_CFG_ALIGN BIT(18)
#define HAL_REO1_SW_COOKIE_CFG_ENABLE BIT(19)
#define HAL_REO1_SW_COOKIE_CFG_GLOBAL_ENABLE BIT(20)
+#define HAL_REO_QDESC_ADDR_READ_LUT_ENABLE BIT(7)
+#define HAL_REO_QDESC_ADDR_READ_CLEAR_QDESC_ARRAY BIT(6)
/* CE ring bit field mask and shift */
#define HAL_CE_DST_R0_DEST_CTRL_MAX_LEN GENMASK(15, 0)
diff --git a/drivers/net/wireless/ath/ath12k/hw.c b/drivers/net/wireless/ath/ath12k/hw.c
index a106ebed7870d..525a7199afac1 100644
--- a/drivers/net/wireless/ath/ath12k/hw.c
+++ b/drivers/net/wireless/ath/ath12k/hw.c
@@ -734,6 +734,8 @@ static const struct ath12k_hw_regs qcn9274_v2_regs = {
.hal_reo1_sw_cookie_cfg1 = 0x00000070,
.hal_reo1_qdesc_lut_base0 = 0x00000074,
.hal_reo1_qdesc_lut_base1 = 0x00000078,
+ .hal_reo1_qdesc_addr = 0x0000007c,
+ .hal_reo1_qdesc_max_peerid = 0x00000088,
.hal_reo1_ring_base_lsb = 0x00000500,
.hal_reo1_ring_base_msb = 0x00000504,
.hal_reo1_ring_id = 0x00000508,
diff --git a/drivers/net/wireless/ath/ath12k/hw.h b/drivers/net/wireless/ath/ath12k/hw.h
index 8d52182e28aef..7122cab2864ad 100644
--- a/drivers/net/wireless/ath/ath12k/hw.h
+++ b/drivers/net/wireless/ath/ath12k/hw.h
@@ -296,6 +296,9 @@ struct ath12k_hw_regs {
u32 hal_tcl_status_ring_base_lsb;
+ u32 hal_reo1_qdesc_addr;
+ u32 hal_reo1_qdesc_max_peerid;
+
u32 hal_wbm_idle_ring_base_lsb;
u32 hal_wbm_idle_ring_misc_addr;
u32 hal_wbm_r0_idle_list_cntl_addr;
diff --git a/drivers/net/wireless/ath/ath12k/wmi.c b/drivers/net/wireless/ath/ath12k/wmi.c
index 5db1966210b1c..14550a1d6edb7 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.c
+++ b/drivers/net/wireless/ath/ath12k/wmi.c
@@ -3665,7 +3665,8 @@ ath12k_fill_band_to_mac_param(struct ath12k_base *soc,
}
static void
-ath12k_wmi_copy_resource_config(struct ath12k_wmi_resource_config_params *wmi_cfg,
+ath12k_wmi_copy_resource_config(struct ath12k_base *ab,
+ struct ath12k_wmi_resource_config_params *wmi_cfg,
struct ath12k_wmi_resource_config_arg *tg_cfg)
{
wmi_cfg->num_vdevs = cpu_to_le32(tg_cfg->num_vdevs);
@@ -3732,6 +3733,9 @@ ath12k_wmi_copy_resource_config(struct ath12k_wmi_resource_config_params *wmi_cf
WMI_RSRC_CFG_FLAGS2_RX_PEER_METADATA_VERSION);
wmi_cfg->host_service_flags = cpu_to_le32(tg_cfg->is_reg_cc_ext_event_supported <<
WMI_RSRC_CFG_HOST_SVC_FLAG_REG_CC_EXT_SUPPORT_BIT);
+ if (ab->hw_params->reoq_lut_support)
+ wmi_cfg->host_service_flags |=
+ cpu_to_le32(1 << WMI_RSRC_CFG_HOST_SVC_FLAG_REO_QREF_SUPPORT_BIT);
wmi_cfg->ema_max_vap_cnt = cpu_to_le32(tg_cfg->ema_max_vap_cnt);
wmi_cfg->ema_max_profile_period = cpu_to_le32(tg_cfg->ema_max_profile_period);
wmi_cfg->flags2 |= cpu_to_le32(WMI_RSRC_CFG_FLAGS2_CALC_NEXT_DTIM_COUNT_SET);
@@ -3772,7 +3776,7 @@ static int ath12k_init_cmd_send(struct ath12k_wmi_pdev *wmi,
ptr = skb->data + sizeof(*cmd);
cfg = ptr;
- ath12k_wmi_copy_resource_config(cfg, &arg->res_cfg);
+ ath12k_wmi_copy_resource_config(ab, cfg, &arg->res_cfg);
cfg->tlv_header = ath12k_wmi_tlv_cmd_hdr(WMI_TAG_RESOURCE_CONFIG,
sizeof(*cfg));
diff --git a/drivers/net/wireless/ath/ath12k/wmi.h b/drivers/net/wireless/ath/ath12k/wmi.h
index 1ba33e30ddd27..5fa785434e15b 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.h
+++ b/drivers/net/wireless/ath/ath12k/wmi.h
@@ -2461,6 +2461,7 @@ struct wmi_init_cmd {
} __packed;
#define WMI_RSRC_CFG_HOST_SVC_FLAG_REG_CC_EXT_SUPPORT_BIT 4
+#define WMI_RSRC_CFG_HOST_SVC_FLAG_REO_QREF_SUPPORT_BIT 12
#define WMI_RSRC_CFG_FLAGS2_RX_PEER_METADATA_VERSION GENMASK(5, 4)
#define WMI_RSRC_CFG_FLAG1_BSS_CHANNEL_INFO_64 BIT(5)
#define WMI_RSRC_CFG_FLAGS2_CALC_NEXT_DTIM_COUNT_SET BIT(9)
--
2.39.5
next prev parent reply other threads:[~2025-06-04 0:55 UTC|newest]
Thread overview: 127+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-04 0:48 [PATCH AUTOSEL 6.15 001/118] net: macb: Check return value of dma_set_mask_and_coherent() Sasha Levin
2025-06-04 0:48 ` [PATCH AUTOSEL 6.15 002/118] net: lan743x: Modify the EEPROM and OTP size for PCI1xxxx devices Sasha Levin
2025-06-04 0:48 ` [PATCH AUTOSEL 6.15 003/118] tipc: use kfree_sensitive() for aead cleanup Sasha Levin
2025-06-04 0:48 ` [PATCH AUTOSEL 6.15 004/118] f2fs: use vmalloc instead of kvmalloc in .init_{,de}compress_ctx Sasha Levin
2025-06-04 0:48 ` [PATCH AUTOSEL 6.15 005/118] bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem() Sasha Levin
2025-06-04 0:48 ` [PATCH AUTOSEL 6.15 006/118] Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922 Sasha Levin
2025-06-04 0:48 ` [PATCH AUTOSEL 6.15 007/118] i2c: designware: Invoke runtime suspend on quick slave re-registration Sasha Levin
2025-06-04 0:48 ` [PATCH AUTOSEL 6.15 008/118] wifi: mt76: mt7996: drop fragments with multicast or broadcast RA Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 009/118] emulex/benet: correct command version selection in be_cmd_get_stats() Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 010/118] Bluetooth: btusb: Add new VID/PID 13d3/3630 for MT7925 Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 011/118] Bluetooth: btusb: Add RTL8851BE device 0x0bda:0xb850 Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 012/118] Bluetooth: ISO: Fix not using SID from adv report Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 013/118] Bluetooth: btmrvl_sdio: Fix wakeup source leaks on device unbind Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 014/118] Bluetooth: btmtksdio: " Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 015/118] wifi: mt76: mt7996: fix uninitialized symbol warning Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 016/118] wifi: mt76: mt76x2: Add support for LiteOn WN4516R,WN4519R Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 017/118] wifi: mt76: mt7921: add 160 MHz AP for mt7922 device Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 018/118] wifi: mt76: mt7925: introduce thermal protection Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 019/118] wifi: mac80211: validate SCAN_FLAG_AP in scan request during MLO Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 020/118] sctp: Do not wake readers in __sctp_write_space() Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 021/118] libbpf/btf: Fix string handling to support multi-split BTF Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 022/118] cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 023/118] i2c: tegra: check msg length in SMBUS block read Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 024/118] i2c: pasemi: Enable the unjam machine Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 025/118] i2c: npcm: Add clock toggle recovery Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 026/118] clk: qcom: gcc-x1e80100: Set FORCE MEM CORE for UFS clocks Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 027/118] clk: qcom: gcc: Set FORCE_MEM_CORE_ON for gcc_ufs_axi_clk for 8650/8750 Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 028/118] net: dlink: add synchronization for stats update Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 029/118] net: phy: mediatek: do not require syscon compatible for pio property Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 030/118] wifi: ath12k: fix macro definition HAL_RX_MSDU_PKT_LENGTH_GET Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 031/118] wifi: ath12k: fix a possible dead lock caused by ab->base_lock Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 032/118] wifi: ath11k: Fix QMI memory reuse logic Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 033/118] iommu/amd: Allow matching ACPI HID devices without matching UIDs Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 034/118] wifi: rtw89: leave idle mode when setting WEP encryption for AP mode Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 035/118] tcp: always seek for minimal rtt in tcp_rcv_rtt_update() Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 036/118] tcp: remove zero TCP TS samples for autotuning Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 037/118] tcp: fix initial tp->rcvq_space.space value for passive TS enabled flows Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 038/118] tcp: add receive queue awareness in tcp_rcv_space_adjust() Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 039/118] x86/sgx: Prevent attempts to reclaim poisoned pages Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 040/118] ipv4/route: Use this_cpu_inc() for stats on PREEMPT_RT Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 041/118] net: page_pool: Don't recycle into cache " Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 042/118] xfrm: validate assignment of maximal possible SEQ number Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 043/118] net: phy: marvell-88q2xxx: Enable temperature measurement in probe again Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 044/118] openvswitch: Stricter validation for the userspace action Sasha Levin
2025-06-04 7:57 ` Ilya Maximets
2025-06-04 8:03 ` Greg KH
2025-06-04 8:19 ` Ilya Maximets
2025-06-04 8:28 ` Greg KH
2025-06-04 8:47 ` Ilya Maximets
2025-06-05 14:23 ` Jakub Kicinski
2025-06-05 14:45 ` Greg KH
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 045/118] net: atlantic: generate software timestamp just before the doorbell Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 046/118] pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name() Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 047/118] pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction() Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 048/118] bpf: Pass the same orig_call value to trampoline functions Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 049/118] net: stmmac: generate software timestamp just before the doorbell Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 050/118] pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction() Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 051/118] libbpf: Check bpf_map_skeleton link for NULL Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 052/118] pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get() Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 053/118] net/mlx5: HWS, fix counting of rules in the matcher Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 054/118] net: mlx4: add SOF_TIMESTAMPING_TX_SOFTWARE flag when getting ts info Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 055/118] net: vertexcom: mse102x: Return code for mse102x_rx_pkt_spi Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 056/118] wifi: rtw88: rtw8822bu VID/PID for BUFFALO WI-U2-866DM Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 057/118] wifi: iwlwifi: mld: call thermal exit without wiphy lock held Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 058/118] wireless: purelifi: plfxlc: fix memory leak in plfxlc_usb_wreq_asyn() Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 059/118] wifi: mac80211: do not offer a mesh path if forwarding is disabled Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 060/118] bpftool: Fix cgroup command to only show cgroup bpf programs Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 061/118] clk: rockchip: rk3036: mark ddrphy as critical Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 062/118] hid-asus: check ROG Ally MCU version and warn Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 063/118] ipmi:ssif: Fix a shutdown race Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 064/118] rtla: Define __NR_sched_setattr for LoongArch Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 065/118] wifi: iwlwifi: mvm: fix beacon CCK flag Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 066/118] wifi: iwlwifi: dvm: pair transport op-mode enter/leave Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 067/118] wifi: iwlwifi: mld: check for NULL before referencing a pointer Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 068/118] bpf: Add bpf_rbtree_{root,left,right} kfunc Sasha Levin
2025-06-14 4:29 ` Shung-Hsi Yu
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 069/118] f2fs: fix to bail out in get_new_segment() Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 070/118] tracing: Only return an adjusted address if it matches the kernel address Sasha Levin
2025-06-04 1:15 ` Steven Rostedt
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 071/118] netfilter: nft_set_pipapo: clamp maximum map bucket size to INT_MAX Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 072/118] libbpf: Add identical pointer detection to btf_dedup_is_equiv() Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 073/118] scsi: lpfc: Fix lpfc_check_sli_ndlp() handling for GEN_REQUEST64 commands Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 074/118] scsi: smartpqi: Add new PCI IDs Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 075/118] iommu/amd: Ensure GA log notifier callbacks finish running before module unload Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 076/118] wifi: iwlwifi: pcie: make sure to lock rxq->read Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 077/118] wifi: rtw89: 8922a: fix TX fail with wrong VCO setting Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 078/118] wifi: mac80211_hwsim: Prevent tsf from setting if beacon is disabled Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 079/118] netdevsim: Mark NAPI ID on skb in nsim_rcv Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 080/118] net/mlx5: HWS, Fix IP version decision Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 081/118] bpf: Use proper type to calculate bpf_raw_tp_null_args.mask index Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 082/118] wifi: mac80211: VLAN traffic in multicast path Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 083/118] Revert "mac80211: Dynamically set CoDel parameters per station" Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 084/118] wifi: iwlwifi: Add missing MODULE_FIRMWARE for Qu-c0-jf-b0 Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 085/118] net: bridge: mcast: update multicast contex when vlan state is changed Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 086/118] net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 087/118] vxlan: Do not treat dst cache initialization errors as fatal Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 088/118] bnxt_en: Remove unused field "ref_count" in struct bnxt_ulp Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 089/118] vxlan: Add RCU read-side critical sections in the Tx path Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 090/118] wifi: ath12k: correctly handle mcast packets for clients Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 091/118] wifi: ath12k: using msdu end descriptor to check for rx multicast packets Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 092/118] iommu: Avoid introducing more races Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 093/118] net: ethernet: ti: am65-cpsw: handle -EPROBE_DEFER Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 094/118] software node: Correct a OOB check in software_node_get_reference_args() Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 095/118] wifi: ath12k: make assoc link associate first Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 096/118] isofs: fix Y2038 and Y2156 issues in Rock Ridge TF entry Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 097/118] pinctrl: mcp23s08: Reset all pins to input at probe Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 098/118] wifi: ath12k: fix failed to set mhi state error during reboot with hardware grouping Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 099/118] scsi: lpfc: Use memcpy() for BIOS version Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 100/118] sock: Correct error checking condition for (assign|release)_proto_idx() Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 101/118] i40e: fix MMIO write access to an invalid page in i40e_clear_hw Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 102/118] ixgbe: Fix unreachable retry logic in combined and byte I2C write functions Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 103/118] RDMA/hns: initialize db in update_srq_db() Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 104/118] ice: fix check for existing switch rule Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 105/118] usbnet: asix AX88772: leave the carrier control to phylink Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 106/118] f2fs: fix to set atomic write status more clear Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 107/118] bpf, sockmap: Fix data lost during EAGAIN retries Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 108/118] net: ethernet: cortina: Use TOE/TSO on all TCP Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 109/118] octeontx2-pf: Add error log forcn10k_map_unmap_rq_policer() Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 110/118] wifi: rtw88: Set AMPDU factor to hardware for RTL8814A Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 111/118] wifi: ath12k: Fix incorrect rates sent to firmware Sasha Levin
2025-06-04 0:50 ` Sasha Levin [this message]
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 113/118] wifi: ath12k: Fix memory leak due to multiple rx_stats allocation Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 114/118] wifi: ath11k: determine PM policy based on machine model Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 115/118] wifi: ath12k: fix link valid field initialization in the monitor Rx Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 116/118] wifi: ath12k: fix incorrect CE addresses Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 117/118] wifi: ath12k: Pass correct values of center freq1 and center freq2 for 160 MHz Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 118/118] net/mlx5: HWS, Harden IP version definer checks Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250604005049.4147522-112-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=ath12k@lists.infradead.org \
--cc=jeff.johnson@oss.qualcomm.com \
--cc=jjohnson@kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=patches@lists.linux.dev \
--cc=quic_nithp@quicinc.com \
--cc=quic_srirrama@quicinc.com \
--cc=stable@vger.kernel.org \
--cc=vasanthakumar.thiagarajan@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox