From: Sasha Levin <sashal@kernel.org>
To: patches@lists.linux.dev, stable@vger.kernel.org
Cc: Liwei Sun <sunliweis@126.com>,
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>,
Sasha Levin <sashal@kernel.org>,
marcel@holtmann.org, luiz.dentz@gmail.com,
linux-bluetooth@vger.kernel.org
Subject: [PATCH AUTOSEL 6.15 006/118] Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922
Date: Tue, 3 Jun 2025 20:48:57 -0400 [thread overview]
Message-ID: <20250604005049.4147522-6-sashal@kernel.org> (raw)
In-Reply-To: <20250604005049.4147522-1-sashal@kernel.org>
From: Liwei Sun <sunliweis@126.com>
[ Upstream commit 71d9d3522aec301e4a1c4eae4b5e0656fc4a7262 ]
A new variant of MT7922 wireless device has been identified.
The device introduces itself as MEDIATEK MT7922,
so treat it as MediaTek device.
With this patch, btusb driver works as expected:
[ 3.151162] Bluetooth: Core ver 2.22
[ 3.151185] Bluetooth: HCI device and connection manager initialized
[ 3.151189] Bluetooth: HCI socket layer initialized
[ 3.151191] Bluetooth: L2CAP socket layer initialized
[ 3.151194] Bluetooth: SCO socket layer initialized
[ 3.295718] Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512
[ 4.676634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.676637] Bluetooth: BNEP filters: protocol multicast
[ 4.676640] Bluetooth: BNEP socket layer initialized
[ 5.560453] Bluetooth: hci0: Device setup in 2320660 usecs
[ 5.560457] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 5.619197] Bluetooth: hci0: AOSP extensions version v1.00
[ 5.619204] Bluetooth: hci0: AOSP quality report is supported
[ 5.619301] Bluetooth: MGMT ver 1.23
[ 6.741247] Bluetooth: RFCOMM TTY layer initialized
[ 6.741258] Bluetooth: RFCOMM socket layer initialized
[ 6.741261] Bluetooth: RFCOMM ver 1.11
lspci output:
04:00.0 Network controller: MEDIATEK Corp. MT7922 802.11ax PCI Express Wireless Network Adapter
USB information:
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3584 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: Liwei Sun <sunliweis@126.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
**YES** This commit should be backported to stable kernel trees. ##
Analysis ### Commit Assessment: 1. **Bug Fix Nature**: This commit fixes
a user-facing issue where the MediaTek MT7922 Bluetooth device with
VID/PID 13d3:3584 was not recognized by the btusb driver. Without this
fix, users with this specific hardware variant would have non-functional
Bluetooth. 2. **Code Changes**: The change is minimal and extremely
safe: - Adds a single line: `{ USB_DEVICE(0x13d3, 0x3584), .driver_info
= BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }` - This is purely additive -
it only adds device recognition without modifying any existing
functionality - Uses existing, well-tested driver flags (`BTUSB_MEDIATEK
| BTUSB_WIDEBAND_SPEECH`) that are already used for other MT7922
variants 3. **Historical Pattern**: Based on the similar commits
provided and git history analysis: - All 4 similar commits (adding
MT7922/MT7925 VID/PIDs) were marked as "Backport Status: YES" - Multiple
similar MT7922 VID/PID additions have been backported to stable kernels
(confirmed by git tag analysis showing commits like bf809efdcc4d
appearing in v6.10.x stable releases) - The pattern shows these hardware
enablement patches are consistently considered appropriate for stable
backports 4. **Risk Assessment**: - **Minimal Risk**: Only affects
systems with this specific USB device (VID 13d3, PID 3584) - **No
Behavioral Changes**: Doesn't modify any existing code paths or
algorithms - **Self-Contained**: Single device ID addition with proven
driver flags - **No Side Effects**: Cannot impact other hardware or
break existing functionality 5. **User Impact**: - **Immediate
Benefit**: Users with this MT7922 variant get working Bluetooth
functionality - **Hardware Support**: Essential for device recognition
on newer hardware that might ship with this specific variant - **No
Downside**: Zero impact on users without this hardware 6. **Stable Tree
Criteria Compliance**: - ✅ Fixes important user-facing issue (non-
working Bluetooth hardware) - ✅ Small, contained change - ✅ No
architectural modifications - ✅ Uses existing, stable code paths - ✅
Follows established pattern of similar backported commits The commit is
a textbook example of a stable-appropriate hardware enablement fix -
minimal risk, clear user benefit, and consistent with established
backport patterns for MediaTek Bluetooth device additions.
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 256b451bbe065..df3380a8de85e 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -678,6 +678,8 @@ static const struct usb_device_id quirks_table[] = {
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3568), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x13d3, 0x3584), .driver_info = BTUSB_MEDIATEK |
+ BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3605), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3607), .driver_info = BTUSB_MEDIATEK |
--
2.39.5
next prev parent reply other threads:[~2025-06-04 0:50 UTC|newest]
Thread overview: 127+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-04 0:48 [PATCH AUTOSEL 6.15 001/118] net: macb: Check return value of dma_set_mask_and_coherent() Sasha Levin
2025-06-04 0:48 ` [PATCH AUTOSEL 6.15 002/118] net: lan743x: Modify the EEPROM and OTP size for PCI1xxxx devices Sasha Levin
2025-06-04 0:48 ` [PATCH AUTOSEL 6.15 003/118] tipc: use kfree_sensitive() for aead cleanup Sasha Levin
2025-06-04 0:48 ` [PATCH AUTOSEL 6.15 004/118] f2fs: use vmalloc instead of kvmalloc in .init_{,de}compress_ctx Sasha Levin
2025-06-04 0:48 ` [PATCH AUTOSEL 6.15 005/118] bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem() Sasha Levin
2025-06-04 0:48 ` Sasha Levin [this message]
2025-06-04 0:48 ` [PATCH AUTOSEL 6.15 007/118] i2c: designware: Invoke runtime suspend on quick slave re-registration Sasha Levin
2025-06-04 0:48 ` [PATCH AUTOSEL 6.15 008/118] wifi: mt76: mt7996: drop fragments with multicast or broadcast RA Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 009/118] emulex/benet: correct command version selection in be_cmd_get_stats() Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 010/118] Bluetooth: btusb: Add new VID/PID 13d3/3630 for MT7925 Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 011/118] Bluetooth: btusb: Add RTL8851BE device 0x0bda:0xb850 Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 012/118] Bluetooth: ISO: Fix not using SID from adv report Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 013/118] Bluetooth: btmrvl_sdio: Fix wakeup source leaks on device unbind Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 014/118] Bluetooth: btmtksdio: " Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 015/118] wifi: mt76: mt7996: fix uninitialized symbol warning Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 016/118] wifi: mt76: mt76x2: Add support for LiteOn WN4516R,WN4519R Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 017/118] wifi: mt76: mt7921: add 160 MHz AP for mt7922 device Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 018/118] wifi: mt76: mt7925: introduce thermal protection Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 019/118] wifi: mac80211: validate SCAN_FLAG_AP in scan request during MLO Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 020/118] sctp: Do not wake readers in __sctp_write_space() Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 021/118] libbpf/btf: Fix string handling to support multi-split BTF Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 022/118] cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 023/118] i2c: tegra: check msg length in SMBUS block read Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 024/118] i2c: pasemi: Enable the unjam machine Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 025/118] i2c: npcm: Add clock toggle recovery Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 026/118] clk: qcom: gcc-x1e80100: Set FORCE MEM CORE for UFS clocks Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 027/118] clk: qcom: gcc: Set FORCE_MEM_CORE_ON for gcc_ufs_axi_clk for 8650/8750 Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 028/118] net: dlink: add synchronization for stats update Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 029/118] net: phy: mediatek: do not require syscon compatible for pio property Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 030/118] wifi: ath12k: fix macro definition HAL_RX_MSDU_PKT_LENGTH_GET Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 031/118] wifi: ath12k: fix a possible dead lock caused by ab->base_lock Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 032/118] wifi: ath11k: Fix QMI memory reuse logic Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 033/118] iommu/amd: Allow matching ACPI HID devices without matching UIDs Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 034/118] wifi: rtw89: leave idle mode when setting WEP encryption for AP mode Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 035/118] tcp: always seek for minimal rtt in tcp_rcv_rtt_update() Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 036/118] tcp: remove zero TCP TS samples for autotuning Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 037/118] tcp: fix initial tp->rcvq_space.space value for passive TS enabled flows Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 038/118] tcp: add receive queue awareness in tcp_rcv_space_adjust() Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 039/118] x86/sgx: Prevent attempts to reclaim poisoned pages Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 040/118] ipv4/route: Use this_cpu_inc() for stats on PREEMPT_RT Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 041/118] net: page_pool: Don't recycle into cache " Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 042/118] xfrm: validate assignment of maximal possible SEQ number Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 043/118] net: phy: marvell-88q2xxx: Enable temperature measurement in probe again Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 044/118] openvswitch: Stricter validation for the userspace action Sasha Levin
2025-06-04 7:57 ` Ilya Maximets
2025-06-04 8:03 ` Greg KH
2025-06-04 8:19 ` Ilya Maximets
2025-06-04 8:28 ` Greg KH
2025-06-04 8:47 ` Ilya Maximets
2025-06-05 14:23 ` Jakub Kicinski
2025-06-05 14:45 ` Greg KH
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 045/118] net: atlantic: generate software timestamp just before the doorbell Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 046/118] pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name() Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 047/118] pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction() Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 048/118] bpf: Pass the same orig_call value to trampoline functions Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 049/118] net: stmmac: generate software timestamp just before the doorbell Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 050/118] pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction() Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 051/118] libbpf: Check bpf_map_skeleton link for NULL Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 052/118] pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get() Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 053/118] net/mlx5: HWS, fix counting of rules in the matcher Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 054/118] net: mlx4: add SOF_TIMESTAMPING_TX_SOFTWARE flag when getting ts info Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 055/118] net: vertexcom: mse102x: Return code for mse102x_rx_pkt_spi Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 056/118] wifi: rtw88: rtw8822bu VID/PID for BUFFALO WI-U2-866DM Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 057/118] wifi: iwlwifi: mld: call thermal exit without wiphy lock held Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 058/118] wireless: purelifi: plfxlc: fix memory leak in plfxlc_usb_wreq_asyn() Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 059/118] wifi: mac80211: do not offer a mesh path if forwarding is disabled Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 060/118] bpftool: Fix cgroup command to only show cgroup bpf programs Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 061/118] clk: rockchip: rk3036: mark ddrphy as critical Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 062/118] hid-asus: check ROG Ally MCU version and warn Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 063/118] ipmi:ssif: Fix a shutdown race Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 064/118] rtla: Define __NR_sched_setattr for LoongArch Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 065/118] wifi: iwlwifi: mvm: fix beacon CCK flag Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 066/118] wifi: iwlwifi: dvm: pair transport op-mode enter/leave Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 067/118] wifi: iwlwifi: mld: check for NULL before referencing a pointer Sasha Levin
2025-06-04 0:49 ` [PATCH AUTOSEL 6.15 068/118] bpf: Add bpf_rbtree_{root,left,right} kfunc Sasha Levin
2025-06-14 4:29 ` Shung-Hsi Yu
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 069/118] f2fs: fix to bail out in get_new_segment() Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 070/118] tracing: Only return an adjusted address if it matches the kernel address Sasha Levin
2025-06-04 1:15 ` Steven Rostedt
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 071/118] netfilter: nft_set_pipapo: clamp maximum map bucket size to INT_MAX Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 072/118] libbpf: Add identical pointer detection to btf_dedup_is_equiv() Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 073/118] scsi: lpfc: Fix lpfc_check_sli_ndlp() handling for GEN_REQUEST64 commands Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 074/118] scsi: smartpqi: Add new PCI IDs Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 075/118] iommu/amd: Ensure GA log notifier callbacks finish running before module unload Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 076/118] wifi: iwlwifi: pcie: make sure to lock rxq->read Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 077/118] wifi: rtw89: 8922a: fix TX fail with wrong VCO setting Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 078/118] wifi: mac80211_hwsim: Prevent tsf from setting if beacon is disabled Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 079/118] netdevsim: Mark NAPI ID on skb in nsim_rcv Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 080/118] net/mlx5: HWS, Fix IP version decision Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 081/118] bpf: Use proper type to calculate bpf_raw_tp_null_args.mask index Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 082/118] wifi: mac80211: VLAN traffic in multicast path Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 083/118] Revert "mac80211: Dynamically set CoDel parameters per station" Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 084/118] wifi: iwlwifi: Add missing MODULE_FIRMWARE for Qu-c0-jf-b0 Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 085/118] net: bridge: mcast: update multicast contex when vlan state is changed Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 086/118] net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 087/118] vxlan: Do not treat dst cache initialization errors as fatal Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 088/118] bnxt_en: Remove unused field "ref_count" in struct bnxt_ulp Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 089/118] vxlan: Add RCU read-side critical sections in the Tx path Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 090/118] wifi: ath12k: correctly handle mcast packets for clients Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 091/118] wifi: ath12k: using msdu end descriptor to check for rx multicast packets Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 092/118] iommu: Avoid introducing more races Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 093/118] net: ethernet: ti: am65-cpsw: handle -EPROBE_DEFER Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 094/118] software node: Correct a OOB check in software_node_get_reference_args() Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 095/118] wifi: ath12k: make assoc link associate first Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 096/118] isofs: fix Y2038 and Y2156 issues in Rock Ridge TF entry Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 097/118] pinctrl: mcp23s08: Reset all pins to input at probe Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 098/118] wifi: ath12k: fix failed to set mhi state error during reboot with hardware grouping Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 099/118] scsi: lpfc: Use memcpy() for BIOS version Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 100/118] sock: Correct error checking condition for (assign|release)_proto_idx() Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 101/118] i40e: fix MMIO write access to an invalid page in i40e_clear_hw Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 102/118] ixgbe: Fix unreachable retry logic in combined and byte I2C write functions Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 103/118] RDMA/hns: initialize db in update_srq_db() Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 104/118] ice: fix check for existing switch rule Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 105/118] usbnet: asix AX88772: leave the carrier control to phylink Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 106/118] f2fs: fix to set atomic write status more clear Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 107/118] bpf, sockmap: Fix data lost during EAGAIN retries Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 108/118] net: ethernet: cortina: Use TOE/TSO on all TCP Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 109/118] octeontx2-pf: Add error log forcn10k_map_unmap_rq_policer() Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 110/118] wifi: rtw88: Set AMPDU factor to hardware for RTL8814A Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 111/118] wifi: ath12k: Fix incorrect rates sent to firmware Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 112/118] wifi: ath12k: Fix the enabling of REO queue lookup table feature Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 113/118] wifi: ath12k: Fix memory leak due to multiple rx_stats allocation Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 114/118] wifi: ath11k: determine PM policy based on machine model Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 115/118] wifi: ath12k: fix link valid field initialization in the monitor Rx Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 116/118] wifi: ath12k: fix incorrect CE addresses Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 117/118] wifi: ath12k: Pass correct values of center freq1 and center freq2 for 160 MHz Sasha Levin
2025-06-04 0:50 ` [PATCH AUTOSEL 6.15 118/118] net/mlx5: HWS, Harden IP version definer checks Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250604005049.4147522-6-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=luiz.von.dentz@intel.com \
--cc=marcel@holtmann.org \
--cc=patches@lists.linux.dev \
--cc=stable@vger.kernel.org \
--cc=sunliweis@126.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox