public inbox for stable@vger.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: patches@lists.linux.dev, stable@vger.kernel.org
Cc: Kang Yang <kang.yang@oss.qualcomm.com>,
	Vasanthakumar Thiagarajan
	<vasanthakumar.thiagarajan@oss.qualcomm.com>,
	Jeff Johnson <jeff.johnson@oss.qualcomm.com>,
	Sasha Levin <sashal@kernel.org>,
	jjohnson@kernel.org, linux-wireless@vger.kernel.org,
	ath12k@lists.infradead.org
Subject: [PATCH AUTOSEL 6.6 16/62] wifi: ath12k: fix macro definition HAL_RX_MSDU_PKT_LENGTH_GET
Date: Tue,  3 Jun 2025 21:01:27 -0400	[thread overview]
Message-ID: <20250604010213.3462-16-sashal@kernel.org> (raw)
In-Reply-To: <20250604010213.3462-1-sashal@kernel.org>

From: Kang Yang <kang.yang@oss.qualcomm.com>

[ Upstream commit a69bbf89d751ba2d6da21d773c4e29c91c5e53c4 ]

Currently, HAL_RX_MSDU_PKT_LENGTH_GET uses u32_get_bits to obtain the
MSDU length from the MSDU description.

This is not right. Because all halphy descriptions are little endian.

So use le32_get_bits for HAL_RX_MSDU_PKT_LENGTH_GET.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1

Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250421023444.1778-9-kang.yang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---

**YES** This commit should be backported to stable kernel trees as it
fixes a critical endianness bug that can cause data corruption and
system crashes. ## Analysis ### Nature of the Bug This is a **critical
endianness bug fix**, not a feature enhancement. The commit changes
`HAL_RX_MSDU_PKT_LENGTH_GET` from using `u32_get_bits` to
`le32_get_bits`. The issue is that the underlying data structure
`rx_msdu_desc` has `info0` declared as `__le32` (little-endian), but the
macro was treating it as native-endian. ### Critical Impact Areas **1.
Memory Safety & Data Corruption:** - The macro extracts MSDU (MAC
Service Data Unit) packet lengths from hardware descriptors - On big-
endian systems, `u32_get_bits` vs `le32_get_bits` would extract
completely wrong values - These incorrect lengths are used for buffer
bounds checking and memory allocation operations - This could lead to
buffer overflows, memory corruption, or kernel crashes **2. Cross-
Architecture Compatibility:** - This bug would manifest on big-endian
architectures (ARM BE, MIPS BE, PowerPC) - x86/x86_64 systems wouldn't
notice the bug due to little-endian architecture - The ath12k driver
supports multiple hardware variants that require correct endian handling
**3. Hardware Descriptor Consistency:** - Analysis shows the ath12k
driver predominantly uses `le32_get_bits` (287 instances vs 242
`u32_get_bits`) - All hardware-specific MSDU length extraction
consistently uses little-endian operations - The `struct rx_msdu_desc`
explicitly marks `info0` as `__le32`, confirming hardware uses little-
endian format ### Comparison with Similar Commits All the reference
commits marked "NO" were either: - Feature additions (A-MSDU indication
improvements) - Structural definition updates - Hardware descriptor
format corrections This commit differs fundamentally - it's fixing
actual data corruption that could cause crashes. ### Backporting
Justification - **Fixes user-affecting bug**: System crashes and data
corruption on big-endian systems - **Small and contained**: Single line
change with clear, targeted fix - **No architectural changes**: Only
corrects endianness handling - **Minimal regression risk**: Aligns code
with actual hardware behavior - **Critical subsystem**: Network packet
processing is core functionality This endianness bug represents exactly
the type of critical, low-risk fix that stable trees are designed to
address.

 drivers/net/wireless/ath/ath12k/hal_desc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath12k/hal_desc.h b/drivers/net/wireless/ath/ath12k/hal_desc.h
index 6c17adc6d60b5..53d66c75344af 100644
--- a/drivers/net/wireless/ath/ath12k/hal_desc.h
+++ b/drivers/net/wireless/ath/ath12k/hal_desc.h
@@ -683,7 +683,7 @@ enum hal_rx_msdu_desc_reo_dest_ind {
 #define RX_MSDU_DESC_INFO0_DECAP_FORMAT		GENMASK(30, 29)
 
 #define HAL_RX_MSDU_PKT_LENGTH_GET(val)		\
-	(u32_get_bits((val), RX_MSDU_DESC_INFO0_MSDU_LENGTH))
+	(le32_get_bits((val), RX_MSDU_DESC_INFO0_MSDU_LENGTH))
 
 struct rx_msdu_desc {
 	__le32 info0;
-- 
2.39.5


  parent reply	other threads:[~2025-06-04  1:02 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-04  1:01 [PATCH AUTOSEL 6.6 01/62] net: macb: Check return value of dma_set_mask_and_coherent() Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 02/62] net: lan743x: Modify the EEPROM and OTP size for PCI1xxxx devices Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 03/62] tipc: use kfree_sensitive() for aead cleanup Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 04/62] f2fs: use vmalloc instead of kvmalloc in .init_{,de}compress_ctx Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 05/62] bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem() Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 06/62] i2c: designware: Invoke runtime suspend on quick slave re-registration Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 07/62] wifi: mt76: mt7996: drop fragments with multicast or broadcast RA Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 08/62] emulex/benet: correct command version selection in be_cmd_get_stats() Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 09/62] wifi: mt76: mt76x2: Add support for LiteOn WN4516R,WN4519R Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 10/62] wifi: mt76: mt7921: add 160 MHz AP for mt7922 device Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 11/62] sctp: Do not wake readers in __sctp_write_space() Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 12/62] cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 13/62] i2c: tegra: check msg length in SMBUS block read Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 14/62] i2c: npcm: Add clock toggle recovery Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 15/62] net: dlink: add synchronization for stats update Sasha Levin
2025-06-04  1:01 ` Sasha Levin [this message]
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 17/62] wifi: ath12k: fix a possible dead lock caused by ab->base_lock Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 18/62] wifi: ath11k: Fix QMI memory reuse logic Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 19/62] wifi: rtw89: leave idle mode when setting WEP encryption for AP mode Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 20/62] tcp: always seek for minimal rtt in tcp_rcv_rtt_update() Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 21/62] tcp: fix initial tp->rcvq_space.space value for passive TS enabled flows Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 22/62] x86/sgx: Prevent attempts to reclaim poisoned pages Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 23/62] ipv4/route: Use this_cpu_inc() for stats on PREEMPT_RT Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 24/62] openvswitch: Stricter validation for the userspace action Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 25/62] net: atlantic: generate software timestamp just before the doorbell Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 26/62] pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name() Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 27/62] pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction() Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 28/62] pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction() Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 29/62] pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get() Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 30/62] net: mlx4: add SOF_TIMESTAMPING_TX_SOFTWARE flag when getting ts info Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 31/62] net: vertexcom: mse102x: Return code for mse102x_rx_pkt_spi Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 32/62] wireless: purelifi: plfxlc: fix memory leak in plfxlc_usb_wreq_asyn() Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 33/62] wifi: mac80211: do not offer a mesh path if forwarding is disabled Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 34/62] bpftool: Fix cgroup command to only show cgroup bpf programs Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 35/62] clk: rockchip: rk3036: mark ddrphy as critical Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 36/62] libbpf: Add identical pointer detection to btf_dedup_is_equiv() Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 37/62] scsi: lpfc: Fix lpfc_check_sli_ndlp() handling for GEN_REQUEST64 commands Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 38/62] iommu/amd: Ensure GA log notifier callbacks finish running before module unload Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 39/62] wifi: iwlwifi: pcie: make sure to lock rxq->read Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 40/62] wifi: mac80211_hwsim: Prevent tsf from setting if beacon is disabled Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 41/62] wifi: mac80211: VLAN traffic in multicast path Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 42/62] wifi: iwlwifi: Add missing MODULE_FIRMWARE for Qu-c0-jf-b0 Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 43/62] net: bridge: mcast: update multicast contex when vlan state is changed Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 44/62] net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 45/62] vxlan: Do not treat dst cache initialization errors as fatal Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 46/62] net: ethernet: ti: am65-cpsw: handle -EPROBE_DEFER Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 47/62] software node: Correct a OOB check in software_node_get_reference_args() Sasha Levin
2025-06-04  1:01 ` [PATCH AUTOSEL 6.6 48/62] pinctrl: mcp23s08: Reset all pins to input at probe Sasha Levin
2025-06-04  1:02 ` [PATCH AUTOSEL 6.6 49/62] wifi: ath12k: fix failed to set mhi state error during reboot with hardware grouping Sasha Levin
2025-06-04  1:02 ` [PATCH AUTOSEL 6.6 50/62] scsi: lpfc: Use memcpy() for BIOS version Sasha Levin
2025-06-04  1:02 ` [PATCH AUTOSEL 6.6 51/62] sock: Correct error checking condition for (assign|release)_proto_idx() Sasha Levin
2025-06-04  1:02 ` [PATCH AUTOSEL 6.6 52/62] i40e: fix MMIO write access to an invalid page in i40e_clear_hw Sasha Levin
2025-06-04  1:02 ` [PATCH AUTOSEL 6.6 53/62] ice: fix check for existing switch rule Sasha Levin
2025-06-04  1:02 ` [PATCH AUTOSEL 6.6 54/62] usbnet: asix AX88772: leave the carrier control to phylink Sasha Levin
2025-06-04  1:02 ` [PATCH AUTOSEL 6.6 55/62] f2fs: fix to set atomic write status more clear Sasha Levin
2025-06-04  1:02 ` [PATCH AUTOSEL 6.6 56/62] bpf, sockmap: Fix data lost during EAGAIN retries Sasha Levin
2025-06-04  1:02 ` [PATCH AUTOSEL 6.6 57/62] net: ethernet: cortina: Use TOE/TSO on all TCP Sasha Levin
2025-06-04  1:02 ` [PATCH AUTOSEL 6.6 58/62] octeontx2-pf: Add error log forcn10k_map_unmap_rq_policer() Sasha Levin
2025-06-04  1:02 ` [PATCH AUTOSEL 6.6 59/62] wifi: ath11k: determine PM policy based on machine model Sasha Levin
2025-06-04  1:02 ` [PATCH AUTOSEL 6.6 60/62] wifi: ath12k: fix link valid field initialization in the monitor Rx Sasha Levin
2025-06-04  1:02 ` [PATCH AUTOSEL 6.6 61/62] wifi: ath12k: fix incorrect CE addresses Sasha Levin
2025-06-04  1:02 ` [PATCH AUTOSEL 6.6 62/62] wifi: ath12k: Pass correct values of center freq1 and center freq2 for 160 MHz Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250604010213.3462-16-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=ath12k@lists.infradead.org \
    --cc=jeff.johnson@oss.qualcomm.com \
    --cc=jjohnson@kernel.org \
    --cc=kang.yang@oss.qualcomm.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=patches@lists.linux.dev \
    --cc=stable@vger.kernel.org \
    --cc=vasanthakumar.thiagarajan@oss.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox