FAILED: patch "[PATCH] crypto: qat - add shutdown handler to qat_c3xxx" failed to apply to 5.10-stable tree

[<gregkh@linuxfoundation.org>]

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 71e0cc1eab584d6f95526a5e8c69ec666ca33e1b
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2025062040-setback-bulgur-2550@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 71e0cc1eab584d6f95526a5e8c69ec666ca33e1b Mon Sep 17 00:00:00 2001
From: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Date: Wed, 26 Mar 2025 15:59:53 +0000
Subject: [PATCH] crypto: qat - add shutdown handler to qat_c3xxx

During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.

This might result in output like the following after the kexec reboot:

    QAT: AE0 is inactive!!
    QAT: failed to get device out of reset
    c3xxx 0000:3f:00.0: qat_hal_clr_reset error
    c3xxx 0000:3f:00.0: Failed to init the AEs
    c3xxx 0000:3f:00.0: Failed to initialise Acceleration Engine
    c3xxx 0000:3f:00.0: Resetting device qat_dev0
    c3xxx 0000:3f:00.0: probe with driver c3xxx failed with error -14

Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.

Cc: <stable@vger.kernel.org>
Fixes: 890c55f4dc0e ("crypto: qat - add support for c3xxx accel type")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

diff --git a/drivers/crypto/intel/qat/qat_c3xxx/adf_drv.c b/drivers/crypto/intel/qat/qat_c3xxx/adf_drv.c
index 260f34d0d541..bceb5dd8b148 100644
--- a/drivers/crypto/intel/qat/qat_c3xxx/adf_drv.c
+++ b/drivers/crypto/intel/qat/qat_c3xxx/adf_drv.c
@@ -209,6 +209,13 @@ static void adf_remove(struct pci_dev *pdev)
 	kfree(accel_dev);
 }
 
+static void adf_shutdown(struct pci_dev *pdev)
+{
+	struct adf_accel_dev *accel_dev = adf_devmgr_pci_to_accel_dev(pdev);
+
+	adf_dev_down(accel_dev);
+}
+
 static const struct pci_device_id adf_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_QAT_C3XXX) },
 	{ }
@@ -220,6 +227,7 @@ static struct pci_driver adf_driver = {
 	.name = ADF_C3XXX_DEVICE_NAME,
 	.probe = adf_probe,
 	.remove = adf_remove,
+	.shutdown = adf_shutdown,
 	.sriov_configure = adf_sriov_configure,
 	.err_handler = &adf_err_handler,
 };