FAILED: patch "[PATCH] usb: dwc3: qcom: Don't leave BCR asserted" failed to apply to 5.4-stable tree

[<gregkh@linuxfoundation.org>]

The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x ef8abc0ba49ce717e6bc4124e88e59982671f3b5
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2025072117-left-ground-e763@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From ef8abc0ba49ce717e6bc4124e88e59982671f3b5 Mon Sep 17 00:00:00 2001
From: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Date: Wed, 9 Jul 2025 18:59:00 +0530
Subject: [PATCH] usb: dwc3: qcom: Don't leave BCR asserted

Leaving the USB BCR asserted prevents the associated GDSC to turn on. This
blocks any subsequent attempts of probing the device, e.g. after a probe
deferral, with the following showing in the log:

[    1.332226] usb30_prim_gdsc status stuck at 'off'

Leave the BCR deasserted when exiting the driver to avoid this issue.

Cc: stable <stable@kernel.org>
Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250709132900.3408752-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 7334de85ad10..ca7e1c02773a 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -680,12 +680,12 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 	ret = reset_control_deassert(qcom->resets);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to deassert resets, err=%d\n", ret);
-		goto reset_assert;
+		return ret;
 	}
 
 	ret = clk_bulk_prepare_enable(qcom->num_clocks, qcom->clks);
 	if (ret < 0)
-		goto reset_assert;
+		return ret;
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!r) {
@@ -755,8 +755,6 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 	dwc3_core_remove(&qcom->dwc);
 clk_disable:
 	clk_bulk_disable_unprepare(qcom->num_clocks, qcom->clks);
-reset_assert:
-	reset_control_assert(qcom->resets);
 
 	return ret;
 }
@@ -771,7 +769,6 @@ static void dwc3_qcom_remove(struct platform_device *pdev)
 	clk_bulk_disable_unprepare(qcom->num_clocks, qcom->clks);
 
 	dwc3_qcom_interconnect_exit(qcom);
-	reset_control_assert(qcom->resets);
 }
 
 static int dwc3_qcom_pm_suspend(struct device *dev)