[PATCH] mfd: intel_soc_pmic_chtdc_ti: Set use_single_read regmap_config flag

[Hans de Goede <hansg@kernel.org>]

Testing has shown that reading multiple registers at once (for 10 bit
adc values) does not work. Set the use_single_read regmap_config flag
to make regmap split these for is.

This should fix temperature opregion accesses done by
drivers/acpi/pmic/intel_pmic_chtdc_ti.c and is also necessary for
the upcoming drivers for the ADC and battery MFD cells.

Fixes: 6bac0606fdba ("mfd: Add support for Cherry Trail Dollar Cove TI PMIC")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
---
 drivers/mfd/intel_soc_pmic_chtdc_ti.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mfd/intel_soc_pmic_chtdc_ti.c b/drivers/mfd/intel_soc_pmic_chtdc_ti.c
index 4c1a68c9f575..a23bda8ddae8 100644
--- a/drivers/mfd/intel_soc_pmic_chtdc_ti.c
+++ b/drivers/mfd/intel_soc_pmic_chtdc_ti.c
@@ -82,6 +82,8 @@ static const struct regmap_config chtdc_ti_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 	.max_register = 0xff,
+	/* Reading multiple registers at once is not supported */
+	.use_single_read = true,
 };
 
 static const struct regmap_irq chtdc_ti_irqs[] = {
-- 
2.49.0