[PATCH 6.12.y 1/2] arm64: dts: ti: k3-j722s-evm: Fix USB2.0_MUX_SEL to select Type-C

[Sasha Levin <sashal@kernel.org>]

From: Hrushikesh Salunke <h-salunke@ti.com>

[ Upstream commit bc8d9e6b5821c40ab5dd3a81e096cb114939de50 ]

J722S SOC has two usb controllers USB0 and USB1. USB0 is brought out on
the EVM as a stacked USB connector which has one Type-A and one Type-C
port. These Type-A and Type-C ports are connected to MUX so only
one of them can be enabled at a time.

Commit under Fixes, tries to enable the USB0 instance of USB to
interface with the Type-C port via the USB hub, by configuring the
USB2.0_MUX_SEL to GPIO_ACTIVE_HIGH. But it is observed on J722S-EVM
that Type-A port is enabled instead of Type-C port.

Fix this by setting USB2.0_MUX_SEL to GPIO_ACTIVE_LOW to enable Type-C
port.

Fixes: 485705df5d5f ("arm64: dts: ti: k3-j722s: Enable PCIe and USB support on J722S-EVM")
Signed-off-by: Hrushikesh Salunke <h-salunke@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20250116125726.2549489-1-h-salunke@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Stable-dep-of: 65ba2a6e77e9 ("arm64: dts: ti: k3-j722s-evm: Fix USB gpio-hog level for Type-C")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index 710f80a14b64..f063e7e7fd8f 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -495,7 +495,7 @@ exp1: gpio@23 {
 		p05-hog {
 			/* P05 - USB2.0_MUX_SEL */
 			gpio-hog;
-			gpios = <5 GPIO_ACTIVE_HIGH>;
+			gpios = <5 GPIO_ACTIVE_LOW>;
 			output-high;
 		};
 
-- 
2.50.1