patch "iio: pressure: bmp280: Use IS_ERR() in bmp280_common_probe()" added to char-misc-linus

patch "iio: pressure: bmp280: Use IS_ERR() in bmp280_common_probe()" added to char-misc-linus

[gregkh]

This is a note to let you know that I've just added the patch titled

    iio: pressure: bmp280: Use IS_ERR() in bmp280_common_probe()

to my char-misc git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
in the char-misc-linus branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.

If you have any questions about this process, please let me know.


From 43c0f6456f801181a80b73d95def0e0fd134e1cc Mon Sep 17 00:00:00 2001
From: Salah Triki <salah.triki@gmail.com>
Date: Mon, 18 Aug 2025 10:27:30 +0100
Subject: iio: pressure: bmp280: Use IS_ERR() in bmp280_common_probe()

`devm_gpiod_get_optional()` may return non-NULL error pointer on failure.
Check its return value using `IS_ERR()` and propagate the error if
necessary.

Fixes: df6e71256c84 ("iio: pressure: bmp280: Explicitly mark GPIO optional")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250818092740.545379-2-salah.triki@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/pressure/bmp280-core.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 74505c9ec1a0..6cdc8ed53520 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -3213,11 +3213,12 @@ int bmp280_common_probe(struct device *dev,
 
 	/* Bring chip out of reset if there is an assigned GPIO line */
 	gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpiod))
+		return dev_err_probe(dev, PTR_ERR(gpiod), "failed to get reset GPIO\n");
+
 	/* Deassert the signal */
-	if (gpiod) {
-		dev_info(dev, "release reset\n");
-		gpiod_set_value(gpiod, 0);
-	}
+	dev_info(dev, "release reset\n");
+	gpiod_set_value(gpiod, 0);
 
 	data->regmap = regmap;
 
-- 
2.50.1