From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>, Heiko Stuebner <heiko@sntech.de>,
Vinod Koul <vkoul@kernel.org>, Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.15.y 2/3] phy: Use device_get_match_data()
Date: Wed, 17 Sep 2025 09:32:51 -0400 [thread overview]
Message-ID: <20250917133252.552245-2-sashal@kernel.org> (raw)
In-Reply-To: <20250917133252.552245-1-sashal@kernel.org>
From: Rob Herring <robh@kernel.org>
[ Upstream commit 21bf6fc47a1e45031ba8a7084343b7cfd09ed1d3 ]
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20231009172923.2457844-15-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 64961557efa1 ("phy: ti: omap-usb2: fix device leak at unbind")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/phy/broadcom/phy-bcm-ns-usb3.c | 9 +++------
drivers/phy/marvell/phy-berlin-usb.c | 7 +++----
drivers/phy/ralink/phy-ralink-usb.c | 10 +++-------
drivers/phy/rockchip/phy-rockchip-pcie.c | 11 ++++-------
drivers/phy/rockchip/phy-rockchip-usb.c | 10 +++-------
drivers/phy/ti/phy-omap-control.c | 9 ++-------
drivers/phy/ti/phy-omap-usb2.c | 11 ++++-------
drivers/phy/ti/phy-ti-pipe3.c | 14 ++++----------
8 files changed, 26 insertions(+), 55 deletions(-)
diff --git a/drivers/phy/broadcom/phy-bcm-ns-usb3.c b/drivers/phy/broadcom/phy-bcm-ns-usb3.c
index 6eb4c173e1f36..a6c5985051b14 100644
--- a/drivers/phy/broadcom/phy-bcm-ns-usb3.c
+++ b/drivers/phy/broadcom/phy-bcm-ns-usb3.c
@@ -16,10 +16,11 @@
#include <linux/iopoll.h>
#include <linux/mdio.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
+#include <linux/property.h>
#include <linux/slab.h>
#define BCM_NS_USB3_PHY_BASE_ADDR_REG 0x1f
@@ -189,7 +190,6 @@ static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg,
static int bcm_ns_usb3_mdio_probe(struct mdio_device *mdiodev)
{
struct device *dev = &mdiodev->dev;
- const struct of_device_id *of_id;
struct phy_provider *phy_provider;
struct device_node *syscon_np;
struct bcm_ns_usb3 *usb3;
@@ -203,10 +203,7 @@ static int bcm_ns_usb3_mdio_probe(struct mdio_device *mdiodev)
usb3->dev = dev;
usb3->mdiodev = mdiodev;
- of_id = of_match_device(bcm_ns_usb3_id_table, dev);
- if (!of_id)
- return -EINVAL;
- usb3->family = (uintptr_t)of_id->data;
+ usb3->family = (enum bcm_ns_family)device_get_match_data(dev);
syscon_np = of_parse_phandle(dev->of_node, "usb3-dmp-syscon", 0);
err = of_address_to_resource(syscon_np, 0, &res);
diff --git a/drivers/phy/marvell/phy-berlin-usb.c b/drivers/phy/marvell/phy-berlin-usb.c
index 78ef6ae72a9a7..f26bf630da2c9 100644
--- a/drivers/phy/marvell/phy-berlin-usb.c
+++ b/drivers/phy/marvell/phy-berlin-usb.c
@@ -8,9 +8,10 @@
#include <linux/io.h>
#include <linux/module.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/reset.h>
#define USB_PHY_PLL 0x04
@@ -162,8 +163,6 @@ MODULE_DEVICE_TABLE(of, phy_berlin_usb_of_match);
static int phy_berlin_usb_probe(struct platform_device *pdev)
{
- const struct of_device_id *match =
- of_match_device(phy_berlin_usb_of_match, &pdev->dev);
struct phy_berlin_usb_priv *priv;
struct phy *phy;
struct phy_provider *phy_provider;
@@ -180,7 +179,7 @@ static int phy_berlin_usb_probe(struct platform_device *pdev)
if (IS_ERR(priv->rst_ctrl))
return PTR_ERR(priv->rst_ctrl);
- priv->pll_divider = *((u32 *)match->data);
+ priv->pll_divider = *((u32 *)device_get_match_data(&pdev->dev));
phy = devm_phy_create(&pdev->dev, NULL, &phy_berlin_usb_ops);
if (IS_ERR(phy)) {
diff --git a/drivers/phy/ralink/phy-ralink-usb.c b/drivers/phy/ralink/phy-ralink-usb.c
index 2bd8ad2e76eda..41bce5290e922 100644
--- a/drivers/phy/ralink/phy-ralink-usb.c
+++ b/drivers/phy/ralink/phy-ralink-usb.c
@@ -13,9 +13,10 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/mutex.h>
-#include <linux/of_platform.h>
+#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
@@ -171,18 +172,13 @@ static int ralink_usb_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct phy_provider *phy_provider;
- const struct of_device_id *match;
struct ralink_usb_phy *phy;
- match = of_match_device(ralink_usb_phy_of_match, &pdev->dev);
- if (!match)
- return -ENODEV;
-
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
if (!phy)
return -ENOMEM;
- phy->clk = (uintptr_t)match->data;
+ phy->clk = (uintptr_t)device_get_match_data(&pdev->dev);
phy->base = NULL;
phy->sysctl = syscon_regmap_lookup_by_phandle(dev->of_node, "ralink,sysctl");
diff --git a/drivers/phy/rockchip/phy-rockchip-pcie.c b/drivers/phy/rockchip/phy-rockchip-pcie.c
index 75216091d9012..c6b4c0b5a6bea 100644
--- a/drivers/phy/rockchip/phy-rockchip-pcie.c
+++ b/drivers/phy/rockchip/phy-rockchip-pcie.c
@@ -12,10 +12,9 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/reset.h>
@@ -63,7 +62,7 @@ struct rockchip_pcie_data {
};
struct rockchip_pcie_phy {
- struct rockchip_pcie_data *phy_data;
+ const struct rockchip_pcie_data *phy_data;
struct regmap *reg_base;
struct phy_pcie_instance {
struct phy *phy;
@@ -365,7 +364,6 @@ static int rockchip_pcie_phy_probe(struct platform_device *pdev)
struct rockchip_pcie_phy *rk_phy;
struct phy_provider *phy_provider;
struct regmap *grf;
- const struct of_device_id *of_id;
int i;
u32 phy_num;
@@ -379,11 +377,10 @@ static int rockchip_pcie_phy_probe(struct platform_device *pdev)
if (!rk_phy)
return -ENOMEM;
- of_id = of_match_device(rockchip_pcie_phy_dt_ids, &pdev->dev);
- if (!of_id)
+ rk_phy->phy_data = device_get_match_data(&pdev->dev);
+ if (!rk_phy->phy_data)
return -EINVAL;
- rk_phy->phy_data = (struct rockchip_pcie_data *)of_id->data;
rk_phy->reg_base = grf;
mutex_init(&rk_phy->pcie_mutex);
diff --git a/drivers/phy/rockchip/phy-rockchip-usb.c b/drivers/phy/rockchip/phy-rockchip-usb.c
index 8454285977ebc..666a896c8f0a0 100644
--- a/drivers/phy/rockchip/phy-rockchip-usb.c
+++ b/drivers/phy/rockchip/phy-rockchip-usb.c
@@ -13,10 +13,9 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/regmap.h>
@@ -458,7 +457,6 @@ static int rockchip_usb_phy_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct rockchip_usb_phy_base *phy_base;
struct phy_provider *phy_provider;
- const struct of_device_id *match;
struct device_node *child;
int err;
@@ -466,14 +464,12 @@ static int rockchip_usb_phy_probe(struct platform_device *pdev)
if (!phy_base)
return -ENOMEM;
- match = of_match_device(dev->driver->of_match_table, dev);
- if (!match || !match->data) {
+ phy_base->pdata = device_get_match_data(dev);
+ if (!phy_base->pdata) {
dev_err(dev, "missing phy data\n");
return -EINVAL;
}
- phy_base->pdata = match->data;
-
phy_base->dev = dev;
phy_base->reg_base = ERR_PTR(-ENODEV);
if (dev->parent && dev->parent->of_node)
diff --git a/drivers/phy/ti/phy-omap-control.c b/drivers/phy/ti/phy-omap-control.c
index 47482f106fab3..1009afc5f4215 100644
--- a/drivers/phy/ti/phy-omap-control.c
+++ b/drivers/phy/ti/phy-omap-control.c
@@ -8,9 +8,9 @@
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/slab.h>
#include <linux/of.h>
-#include <linux/of_device.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/clk.h>
@@ -268,20 +268,15 @@ MODULE_DEVICE_TABLE(of, omap_control_phy_id_table);
static int omap_control_phy_probe(struct platform_device *pdev)
{
- const struct of_device_id *of_id;
struct omap_control_phy *control_phy;
- of_id = of_match_device(omap_control_phy_id_table, &pdev->dev);
- if (!of_id)
- return -EINVAL;
-
control_phy = devm_kzalloc(&pdev->dev, sizeof(*control_phy),
GFP_KERNEL);
if (!control_phy)
return -ENOMEM;
control_phy->dev = &pdev->dev;
- control_phy->type = *(enum omap_control_phy_type *)of_id->data;
+ control_phy->type = *(enum omap_control_phy_type *)device_get_match_data(&pdev->dev);
if (control_phy->type == OMAP_CTRL_TYPE_OTGHS) {
control_phy->otghs_control =
diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
index 59d3a692c7255..dd55f4db72707 100644
--- a/drivers/phy/ti/phy-omap-usb2.c
+++ b/drivers/phy/ti/phy-omap-usb2.c
@@ -19,6 +19,7 @@
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/sys_soc.h>
@@ -371,16 +372,12 @@ static int omap_usb2_probe(struct platform_device *pdev)
struct device_node *node = pdev->dev.of_node;
struct device_node *control_node;
struct platform_device *control_pdev;
- const struct of_device_id *of_id;
- struct usb_phy_data *phy_data;
+ const struct usb_phy_data *phy_data;
- of_id = of_match_device(omap_usb2_id_table, &pdev->dev);
-
- if (!of_id)
+ phy_data = device_get_match_data(&pdev->dev);
+ if (!phy_data)
return -EINVAL;
- phy_data = (struct usb_phy_data *)of_id->data;
-
phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
if (!phy)
return -ENOMEM;
diff --git a/drivers/phy/ti/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c
index 2cbc91e535d46..1ff798519f5c5 100644
--- a/drivers/phy/ti/phy-ti-pipe3.c
+++ b/drivers/phy/ti/phy-ti-pipe3.c
@@ -8,6 +8,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/slab.h>
#include <linux/phy/phy.h>
#include <linux/of.h>
@@ -777,23 +778,16 @@ static int ti_pipe3_probe(struct platform_device *pdev)
struct phy_provider *phy_provider;
struct device *dev = &pdev->dev;
int ret;
- const struct of_device_id *match;
- struct pipe3_data *data;
+ const struct pipe3_data *data;
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
if (!phy)
return -ENOMEM;
- match = of_match_device(ti_pipe3_id_table, dev);
- if (!match)
+ data = device_get_match_data(dev);
+ if (!data)
return -EINVAL;
- data = (struct pipe3_data *)match->data;
- if (!data) {
- dev_err(dev, "no driver data\n");
- return -EINVAL;
- }
-
phy->dev = dev;
phy->mode = data->mode;
phy->dpll_map = data->dpll_map;
--
2.51.0
next prev parent reply other threads:[~2025-09-17 13:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-17 7:45 FAILED: patch "[PATCH] phy: ti: omap-usb2: fix device leak at unbind" failed to apply to 5.15-stable tree gregkh
2025-09-17 13:32 ` [PATCH 5.15.y 1/3] phy: broadcom: ns-usb3: fix Wvoid-pointer-to-enum-cast warning Sasha Levin
2025-09-17 13:32 ` Sasha Levin [this message]
2025-09-17 13:32 ` [PATCH 5.15.y 3/3] phy: ti: omap-usb2: fix device leak at unbind Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250917133252.552245-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=heiko@sntech.de \
--cc=robh@kernel.org \
--cc=stable@vger.kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox