[PATCH v1] gpio: mpfs: fix setting gpio direction to output

[Conor Dooley <conor@kernel.org>]

From: Conor Dooley <conor.dooley@microchip.com>

mpfs_gpio_direction_output() actually sets the line to input mode.
Use the correct register settings for output mode so that this function
actually works as intended.

This was a copy-paste mistake made when converting to regmap during the
driver submission process. It went unnoticed because my test for output
mode is toggling LEDs on an Icicle kit which functions with the
incorrect code. The internal reporter has yet to test the patch, but on
their system the incorrect setting may be the reason for failures to
drive the GPIO lines on the BeagleV-fire board.

CC: stable@vger.kernel.org
Fixes: a987b78f3615e ("gpio: mpfs: add polarfire soc gpio support")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
CC: Conor Dooley <conor.dooley@microchip.com>
CC: Daire McNamara <daire.mcnamara@microchip.com>
CC: Cyril.Jean@microchip.com
CC: Linus Walleij <linus.walleij@linaro.org>
CC: Bartosz Golaszewski <brgl@bgdev.pl>
CC: linux-riscv@lists.infradead.org
CC: linux-gpio@vger.kernel.org
CC: linux-kernel@vger.kernel.org
---
 drivers/gpio/gpio-mpfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-mpfs.c b/drivers/gpio/gpio-mpfs.c
index 82d557a7e5d8d..9468795b96348 100644
--- a/drivers/gpio/gpio-mpfs.c
+++ b/drivers/gpio/gpio-mpfs.c
@@ -69,7 +69,7 @@ static int mpfs_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio_in
 	struct mpfs_gpio_chip *mpfs_gpio = gpiochip_get_data(gc);
 
 	regmap_update_bits(mpfs_gpio->regs, MPFS_GPIO_CTRL(gpio_index),
-			   MPFS_GPIO_DIR_MASK, MPFS_GPIO_EN_IN);
+			   MPFS_GPIO_DIR_MASK, MPFS_GPIO_EN_OUT | MPFS_GPIO_EN_OUT_BUF);
 	regmap_update_bits(mpfs_gpio->regs, mpfs_gpio->offsets->outp, BIT(gpio_index),
 			   value << gpio_index);
 
-- 
2.47.3