[PATCH v1] ALSA: hda/tas2781: Enable init_profile_id for device initialization

[Shenghao Ding <shenghao-ding@ti.com>]

Optimize the time consumption of profile switching, init_profile saves
the common settings of different profiles, such as the dsp coefficients,
etc, which can greatly reduce the profile switching time comsumption and
remove the repetitive settings.

Fixes: e83dcd139e77 ("ASoC: tas2781: Add keyword "init" in profile section")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
---
 sound/hda/codecs/side-codecs/tas2781_hda_i2c.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c b/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c
index 4dea442d8c30..a126f04c3ed7 100644
--- a/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c
+++ b/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c
@@ -474,6 +474,12 @@ static void tasdevice_dspfw_init(void *context)
 	if (tas_priv->fmw->nr_configurations > 0)
 		tas_priv->cur_conf = 0;
 
+	/* Init common setting for different audio profiles */
+	if (tas_priv->rcabin.init_profile_id >= 0)
+		tasdevice_select_cfg_blk(tas_priv,
+			tas_priv->rcabin.init_profile_id,
+			TASDEVICE_BIN_BLK_PRE_POWER_UP);
+
 	/* If calibrated data occurs error, dsp will still works with default
 	 * calibrated data inside algo.
 	 */
@@ -770,6 +776,12 @@ static int tas2781_system_resume(struct device *dev)
 	tasdevice_reset(tas_hda->priv);
 	tasdevice_prmg_load(tas_hda->priv, tas_hda->priv->cur_prog);
 
+	/* Init common setting for different audio profiles */
+	if (tas_hda->priv->rcabin.init_profile_id >= 0)
+		tasdevice_select_cfg_blk(tas_hda->priv,
+			tas_hda->priv->rcabin.init_profile_id,
+			TASDEVICE_BIN_BLK_PRE_POWER_UP);
+
 	if (tas_hda->priv->playback_started)
 		tasdevice_tuning_switch(tas_hda->priv, 0);
 
-- 
2.43.0