* FAILED: patch "[PATCH] arm64: dts: qcom: qcs615: add missing dt property in QUP SEs" failed to apply to 6.17-stable tree
@ 2025-10-16 8:40 gregkh
2025-10-16 19:38 ` [PATCH 6.17.y] arm64: dts: qcom: qcs615: add missing dt property in QUP SEs Sasha Levin
0 siblings, 1 reply; 2+ messages in thread
From: gregkh @ 2025-10-16 8:40 UTC (permalink / raw)
To: viken.dadhaniya, andersson, dmitry.baryshkov; +Cc: stable
The patch below does not apply to the 6.17-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.17.y
git checkout FETCH_HEAD
git cherry-pick -x 6a5e9b9738a32229e2673d4eccfcbfe2ef3a1ab4
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2025101637-delegate-oversold-c71e@gregkh' --subject-prefix 'PATCH 6.17.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6a5e9b9738a32229e2673d4eccfcbfe2ef3a1ab4 Mon Sep 17 00:00:00 2001
From: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Date: Mon, 30 Jun 2025 12:13:38 +0530
Subject: [PATCH] arm64: dts: qcom: qcs615: add missing dt property in QUP SEs
Add the missing required-opps and operating-points-v2 properties to
several I2C, SPI, and UART nodes in the QUP SEs.
Fixes: f6746dc9e379 ("arm64: dts: qcom: qcs615: Add QUPv3 configuration")
Cc: stable@vger.kernel.org
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250630064338.2487409-1-viken.dadhaniya@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
diff --git a/arch/arm64/boot/dts/qcom/sm6150.dtsi b/arch/arm64/boot/dts/qcom/sm6150.dtsi
index bfbb21035492..e033b53f0f0f 100644
--- a/arch/arm64/boot/dts/qcom/sm6150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6150.dtsi
@@ -631,6 +631,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
interconnect-names = "qup-core",
"qup-config";
power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -654,6 +655,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
<&gpi_dma0 1 1 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -681,6 +683,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
<&gpi_dma0 1 2 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -703,6 +706,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
interconnect-names = "qup-core",
"qup-config";
power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table>;
dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
<&gpi_dma0 1 2 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -728,6 +732,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
interconnect-names = "qup-core",
"qup-config";
power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -751,6 +756,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
<&gpi_dma0 1 3 QCOM_GPI_I2C>;
dma-names = "tx",
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH 6.17.y] arm64: dts: qcom: qcs615: add missing dt property in QUP SEs
2025-10-16 8:40 FAILED: patch "[PATCH] arm64: dts: qcom: qcs615: add missing dt property in QUP SEs" failed to apply to 6.17-stable tree gregkh
@ 2025-10-16 19:38 ` Sasha Levin
0 siblings, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2025-10-16 19:38 UTC (permalink / raw)
To: stable; +Cc: Viken Dadhaniya, Dmitry Baryshkov, Bjorn Andersson, Sasha Levin
From: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
[ Upstream commit 6a5e9b9738a32229e2673d4eccfcbfe2ef3a1ab4 ]
Add the missing required-opps and operating-points-v2 properties to
several I2C, SPI, and UART nodes in the QUP SEs.
Fixes: f6746dc9e379 ("arm64: dts: qcom: qcs615: Add QUPv3 configuration")
Cc: stable@vger.kernel.org
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250630064338.2487409-1-viken.dadhaniya@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/qcs615.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi
index bfbb210354922..e033b53f0f0f4 100644
--- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi
@@ -631,6 +631,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
interconnect-names = "qup-core",
"qup-config";
power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -654,6 +655,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
<&gpi_dma0 1 1 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -681,6 +683,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
<&gpi_dma0 1 2 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -703,6 +706,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
interconnect-names = "qup-core",
"qup-config";
power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table>;
dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
<&gpi_dma0 1 2 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -728,6 +732,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
interconnect-names = "qup-core",
"qup-config";
power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -751,6 +756,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
<&gpi_dma0 1 3 QCOM_GPI_I2C>;
dma-names = "tx",
--
2.51.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2025-10-16 19:38 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-10-16 8:40 FAILED: patch "[PATCH] arm64: dts: qcom: qcs615: add missing dt property in QUP SEs" failed to apply to 6.17-stable tree gregkh
2025-10-16 19:38 ` [PATCH 6.17.y] arm64: dts: qcom: qcs615: add missing dt property in QUP SEs Sasha Levin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox