FAILED: patch "[PATCH] s390/pci: Restore IRQ unconditionally for the zPCI device" failed to apply to 6.1-stable tree

FAILED: patch "[PATCH] s390/pci: Restore IRQ unconditionally for the zPCI device" failed to apply to 6.1-stable tree

[gregkh]

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x b45873c3f09153d1ad9b3a7bf9e5c0b0387fd2ea
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2025110237-sizable-stimulate-e9bf@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From b45873c3f09153d1ad9b3a7bf9e5c0b0387fd2ea Mon Sep 17 00:00:00 2001
From: Farhan Ali <alifm@linux.ibm.com>
Date: Wed, 22 Oct 2025 09:47:26 -0700
Subject: [PATCH] s390/pci: Restore IRQ unconditionally for the zPCI device

Commit c1e18c17bda6 ("s390/pci: add zpci_set_irq()/zpci_clear_irq()"),
introduced the zpci_set_irq() and zpci_clear_irq(), to be used while
resetting a zPCI device.

Commit da995d538d3a ("s390/pci: implement reset_slot for hotplug
slot"), mentions zpci_clear_irq() being called in the path for
zpci_hot_reset_device().  But that is not the case anymore and these
functions are not called outside of this file. Instead
zpci_hot_reset_device() relies on zpci_disable_device() also clearing
the IRQs, but misses to reset the zdev->irqs_registered flag.

However after a CLP disable/enable reset, the device's IRQ are
unregistered, but the flag zdev->irq_registered does not get cleared. It
creates an inconsistent state and so arch_restore_msi_irqs() doesn't
correctly restore the device's IRQ. This becomes a problem when a PCI
driver tries to restore the state of the device through
pci_restore_state(). Restore IRQ unconditionally for the device and remove
the irq_registered flag as its redundant.

Fixes: c1e18c17bda6 ("s390/pci: add zpci_set_irq()/zpci_clear_irq()")
Cc: stable@vger.kernnel.org
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h
index 6890925d5587..a32f465ecf73 100644
--- a/arch/s390/include/asm/pci.h
+++ b/arch/s390/include/asm/pci.h
@@ -145,7 +145,6 @@ struct zpci_dev {
 	u8		has_resources	: 1;
 	u8		is_physfn	: 1;
 	u8		util_str_avail	: 1;
-	u8		irqs_registered	: 1;
 	u8		tid_avail	: 1;
 	u8		rtr_avail	: 1; /* Relaxed translation allowed */
 	unsigned int	devfn;		/* DEVFN part of the RID*/
diff --git a/arch/s390/pci/pci_irq.c b/arch/s390/pci/pci_irq.c
index 84482a921332..e73be96ce5fe 100644
--- a/arch/s390/pci/pci_irq.c
+++ b/arch/s390/pci/pci_irq.c
@@ -107,9 +107,6 @@ static int zpci_set_irq(struct zpci_dev *zdev)
 	else
 		rc = zpci_set_airq(zdev);
 
-	if (!rc)
-		zdev->irqs_registered = 1;
-
 	return rc;
 }
 
@@ -123,9 +120,6 @@ static int zpci_clear_irq(struct zpci_dev *zdev)
 	else
 		rc = zpci_clear_airq(zdev);
 
-	if (!rc)
-		zdev->irqs_registered = 0;
-
 	return rc;
 }
 
@@ -427,8 +421,7 @@ bool arch_restore_msi_irqs(struct pci_dev *pdev)
 {
 	struct zpci_dev *zdev = to_zpci(pdev);
 
-	if (!zdev->irqs_registered)
-		zpci_set_irq(zdev);
+	zpci_set_irq(zdev);
 	return true;
 }
 

[PATCH 6.1.y] s390/pci: Restore IRQ unconditionally for the zPCI device

[Sasha Levin]

From: Farhan Ali <alifm@linux.ibm.com>

[ Upstream commit b45873c3f09153d1ad9b3a7bf9e5c0b0387fd2ea ]

Commit c1e18c17bda6 ("s390/pci: add zpci_set_irq()/zpci_clear_irq()"),
introduced the zpci_set_irq() and zpci_clear_irq(), to be used while
resetting a zPCI device.

Commit da995d538d3a ("s390/pci: implement reset_slot for hotplug
slot"), mentions zpci_clear_irq() being called in the path for
zpci_hot_reset_device().  But that is not the case anymore and these
functions are not called outside of this file. Instead
zpci_hot_reset_device() relies on zpci_disable_device() also clearing
the IRQs, but misses to reset the zdev->irqs_registered flag.

However after a CLP disable/enable reset, the device's IRQ are
unregistered, but the flag zdev->irq_registered does not get cleared. It
creates an inconsistent state and so arch_restore_msi_irqs() doesn't
correctly restore the device's IRQ. This becomes a problem when a PCI
driver tries to restore the state of the device through
pci_restore_state(). Restore IRQ unconditionally for the device and remove
the irq_registered flag as its redundant.

Fixes: c1e18c17bda6 ("s390/pci: add zpci_set_irq()/zpci_clear_irq()")
Cc: stable@vger.kernnel.org
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
[ adjusted bitfield context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/include/asm/pci.h | 1 -
 arch/s390/pci/pci_irq.c     | 9 +--------
 2 files changed, 1 insertion(+), 9 deletions(-)

diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h
index 108e732d7b140..e9585a390c1f0 100644
--- a/arch/s390/include/asm/pci.h
+++ b/arch/s390/include/asm/pci.h
@@ -136,7 +136,6 @@ struct zpci_dev {
 	u8		has_resources	: 1;
 	u8		is_physfn	: 1;
 	u8		util_str_avail	: 1;
-	u8		irqs_registered	: 1;
 	u8		reserved	: 2;
 	unsigned int	devfn;		/* DEVFN part of the RID*/
 
diff --git a/arch/s390/pci/pci_irq.c b/arch/s390/pci/pci_irq.c
index 393bcc2c3dc2b..69c5e4f9f10ea 100644
--- a/arch/s390/pci/pci_irq.c
+++ b/arch/s390/pci/pci_irq.c
@@ -107,9 +107,6 @@ static int zpci_set_irq(struct zpci_dev *zdev)
 	else
 		rc = zpci_set_airq(zdev);
 
-	if (!rc)
-		zdev->irqs_registered = 1;
-
 	return rc;
 }
 
@@ -123,9 +120,6 @@ static int zpci_clear_irq(struct zpci_dev *zdev)
 	else
 		rc = zpci_clear_airq(zdev);
 
-	if (!rc)
-		zdev->irqs_registered = 0;
-
 	return rc;
 }
 
@@ -427,8 +421,7 @@ bool arch_restore_msi_irqs(struct pci_dev *pdev)
 {
 	struct zpci_dev *zdev = to_zpci(pdev);
 
-	if (!zdev->irqs_registered)
-		zpci_set_irq(zdev);
+	zpci_set_irq(zdev);
 	return true;
 }
 
-- 
2.51.0