From: Johan Hovold <johan@kernel.org>
To: Johan Hovold <johan@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Ryan Mann <rmann@ndigital.com>,
Andreas Messer <andi@bastelmap.de>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org
Subject: [PATCH 1/8] USB: serial: ftdi_sio: match on interface number for jtag
Date: Mon, 10 Nov 2025 12:12:05 +0100 [thread overview]
Message-ID: <20251110111212.32702-2-johan@kernel.org> (raw)
In-Reply-To: <20251110111212.32702-1-johan@kernel.org>
Some FTDI devices have the first port reserved for JTAG and have been
using a dedicated quirk to prevent binding to it.
As can be inferred directly or indirectly from the commit messages,
almost all of these devices are dual port devices which means that the
more recently added macro for matching on interface number can be used
instead (and some such devices do so already).
This avoids probing interfaces that will never be bound and cleans up
the match table somewhat.
Note that the JTAG quirk is kept for quad port devices, which would
otherwise require three match entries.
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/usb/serial/ftdi_sio.c | 72 ++++++++++++-----------------------
1 file changed, 24 insertions(+), 48 deletions(-)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index b37fa31f5694..9993a5123344 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -628,10 +628,8 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) },
- { USB_DEVICE(FTDI_VID, FTDI_TIAO_UMPA_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
- { USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLXM_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_TIAO_UMPA_PID, 1) },
+ { USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_NT_ORIONLXM_PID, 1) },
{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLX_PLUS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_NT_ORION_IO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONMX_PID) },
@@ -842,24 +840,17 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) },
- { USB_DEVICE(FTDI_VID, CYBER_CORTEX_AV_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, CYBER_CORTEX_AV_PID, 1) },
{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID, 1) },
{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID, 1) },
{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_PID, 1) },
{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_H_PID, 1) },
- { USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
- { USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
- { USB_DEVICE(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
- { USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
- { USB_DEVICE(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
- { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE_INTERFACE_NUMBER(FIC_VID, FIC_NEO1973_DEBUG_PID, 1) },
+ { USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_OOCDLINK_PID, 1) },
+ { USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID, 1) },
+ { USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID, 1) },
+ { USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID, 1) },
+ { USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_TURTELIZER_PID, 1) },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_SCU18) },
{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
@@ -901,17 +892,14 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(ATMEL_VID, STK541_PID) },
{ USB_DEVICE(DE_VID, STB_PID) },
{ USB_DEVICE(DE_VID, WHT_PID) },
- { USB_DEVICE(ADI_VID, ADI_GNICE_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
- { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE_INTERFACE_NUMBER(ADI_VID, ADI_GNICE_PID, 1) },
+ { USB_DEVICE_INTERFACE_NUMBER(ADI_VID, ADI_GNICEPLUS_PID, 1) },
{ USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID,
USB_CLASS_VENDOR_SPEC,
USB_SUBCLASS_VENDOR_SPEC, 0x00) },
{ USB_DEVICE_INTERFACE_NUMBER(ACTEL_VID, MICROSEMI_ARROW_SF2PLUS_BOARD_PID, 2) },
{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
- { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE_INTERFACE_NUMBER(MARVELL_VID, MARVELL_SHEEVAPLUG_PID, 1) },
{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
{ USB_DEVICE(FTDI_VID, PI_C865_PID) },
@@ -934,10 +922,8 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(PI_VID, PI_1016_PID) },
{ USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) },
{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
- { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
- { USB_DEVICE(FTDI_VID, TI_XDS100V2_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, MARVELL_OPENRD_PID, 1) },
+ { USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, TI_XDS100V2_PID, 1) },
{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
{ USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
{ USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
@@ -946,18 +932,14 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
{ USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
{ USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
- { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
- { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
- { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, XVERVE_SIGNALYZER_ST_PID, 1) },
+ { USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID, 1) },
+ { USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID, 1) },
{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) },
{ USB_DEVICE(FTDI_VID, ACCESIO_COM4SM_PID) },
- { USB_DEVICE(IONICS_VID, IONICS_PLUGCOMPUTER_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE_INTERFACE_NUMBER(IONICS_VID, IONICS_PLUGCOMPUTER_PID, 1) },
{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_24_MASTER_WING_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_PC_WING_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_USB_DMX_PID) },
@@ -972,15 +954,12 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_FHE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
- { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
- { USB_DEVICE(ST_VID, ST_STMCLT_2232_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE_INTERFACE_NUMBER(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID, 1) },
+ { USB_DEVICE_INTERFACE_NUMBER(ST_VID, ST_STMCLT_2232_PID, 1) },
{ USB_DEVICE(ST_VID, ST_STMCLT_4232_PID),
.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
- { USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID, 1) },
{ USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
/* Crucible Devices */
{ USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) },
@@ -1055,8 +1034,7 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) },
{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7563U_PID) },
{ USB_DEVICE(WICED_VID, WICED_USB20706V2_PID) },
- { USB_DEVICE(TI_VID, TI_CC3200_LAUNCHPAD_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE_INTERFACE_NUMBER(TI_VID, TI_CC3200_LAUNCHPAD_PID, 1) },
{ USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_BT_USB_PID) },
{ USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_WL_USB_PID) },
{ USB_DEVICE(AIRBUS_DS_VID, AIRBUS_DS_P8GR) },
@@ -1076,10 +1054,8 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) },
{ USB_DEVICE_INTERFACE_NUMBER(UBLOX_VID, UBLOX_EVK_M101_PID, 2) },
/* FreeCalypso USB adapters */
- { USB_DEVICE(FTDI_VID, FTDI_FALCONIA_JTAG_BUF_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
- { USB_DEVICE(FTDI_VID, FTDI_FALCONIA_JTAG_UNBUF_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_FALCONIA_JTAG_BUF_PID, 1) },
+ { USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_FALCONIA_JTAG_UNBUF_PID, 1) },
/* GMC devices */
{ USB_DEVICE(GMC_VID, GMC_Z216C_PID) },
/* Altera USB Blaster 3 */
--
2.51.0
parent reply other threads:[~2025-11-10 11:14 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <20251110111212.32702-1-johan@kernel.org>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251110111212.32702-2-johan@kernel.org \
--to=johan@kernel.org \
--cc=andi@bastelmap.de \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=rmann@ndigital.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).