From: Aaron Rainbolt <arainbolt@kfocus.org>
To: srinivas pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>,
viresh.kumar@linaro.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org, stable@vger.kernel.org,
mmikowski@kfocus.org, Thomas Renninger <trenn@suse.de>
Subject: Re: [REGRESSION] Intel Turbo Boost stuck disabled on some Clevo machines (was: [PATCH] cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode)
Date: Mon, 10 Nov 2025 18:38:07 -0600 [thread overview]
Message-ID: <20251110183807.5288bf8e@kf-m2g5> (raw)
In-Reply-To: <aa8d90214822829fb392022f0c7f4148822a6aa7.camel@linux.intel.com>
On Mon, 10 Nov 2025 08:58:55 -0800
srinivas pandruvada <srinivas.pandruvada@linux.intel.com> wrote:
> + Thomas
>
> Please verify so that I can post the patch.
>
> Thanks,
> Srinivas
Hi Srinivas,
I have tested the newest patch against KFocus's 6.14 kernel on the
affected hardware, and can confirm that this patch also allows Turbo
Boost to function correctly. High-frequency modes are available in
cpupower-gui, and the "Turbo disabled by BIOS or unavailable on
processor" messages stop occurring in dmesg shortly after boot.
Tested-by: Aaron Rainbolt <arainbolt@kfocus.org>
--
Aaron
>
> On Thu, 2025-11-06 at 17:48 -0800, srinivas pandruvada wrote:
> > Hi Aaron,
> >
> > Please again verify this change. This limits the scope.
> > Patch attached.
> >
> > Thanks,
> > Srinivas
> >
> > On Thu, 2025-11-06 at 11:31 -0600, Aaron Rainbolt wrote:
> > > On Thu, 06 Nov 2025 07:23:14 -0800
> > > srinivas pandruvada <srinivas.pandruvada@linux.intel.com> wrote:
> > >
> > > > Hi Aaron,
> > > >
> > > > On Wed, 2025-09-10 at 15:33 -0500, Aaron Rainbolt wrote:
> > > > > On Wed, 10 Sep 2025 10:15:00 -0700
> > > > > srinivas pandruvada <srinivas.pandruvada@linux.intel.com>
> > > > > wrote:
> > > > >
> > > > > > On Wed, 2025-09-10 at 11:36 -0500, Aaron Rainbolt wrote:
> > > > > > > On Wed, 30 Apr 2025 16:29:09 +0200
> > > > > > > "Rafael J. Wysocki" <rafael@kernel.org> wrote:
> > > > > > >
> > > > > > > > On Tue, Apr 29, 2025 at 11:07 PM Srinivas Pandruvada
> > > > > > > > <srinivas.pandruvada@linux.intel.com> wrote:
> > > > > > > > >
> > > > > > > > > When turbo mode is unavailable on a Skylake-X system,
> > > > > > > > > executing
> > > > > > > > > the
> > > > > > > > > command:
> > > > > > > > > "echo 1 >
> > > > > > > > > /sys/devices/system/cpu/intel_pstate/no_turbo"
> > > > > > > > > results in an unchecked MSR access error: WRMSR to
> > > > > > > > > 0x199
> > > > > > > > > (attempted to write 0x0000000100001300).
> > > > Please try the attached patch, if this address this issue.
> > >
> > > I can confirm that this patch does resolve the issue when applied
> > > to
> > > Kubuntu Focus's 6.14 kernel. CPU frequencies are available that
> > > require
> > > turbo boost, and `cat /sys/devices/system/cpu/intel_pstate`
> > > returns `0`. The logs from `dmesg` also indicate that turbo was
> > > disabled earlier in boot, but the warnings about turbo being
> > > disabled stop appearing later on, even when manipulating the
> > > `no_turbo` file:
> > >
> > > [ 25.893012] intel_pstate: Turbo is disabled
> > > [ 25.893019] intel_pstate: Turbo disabled by BIOS or unavailable
> > > on
> > > processor
> > > [ 25.950587] NET: Registered PF_QIPCRTR protocol family
> > > [ 26.599013] Realtek Internal NBASE-T PHY r8169-0-6c00:00:
> > > attached
> > > PHY driver (mii_bus:phy_addr=r8169-0-6c00:00, irq=MAC)
> > > [ 26.725959] ACPI BIOS Error (bug): Could not resolve symbol
> > > [\_TZ.ETMD], AE_NOT_FOUND (20240827/psargs-332)
> > >
> > > [ 26.725976] No Local Variables are initialized for Method
> > > [_OSC]
> > >
> > > [ 26.725978] Initialized Arguments for Method [_OSC]: (4
> > > arguments
> > > defined for method invocation)
> > > [ 26.725979] Arg0: 0000000030ddf166 <Obj>
> > > Buffer(16)
> > > 5D A8 3B B2 B7 C8 42 35
> > > [ 26.725991] Arg1: 0000000002bd3ac4 <Obj> Integer
> > > 0000000000000001
> > > [ 26.725996] Arg2: 0000000033eb047e <Obj> Integer
> > > 0000000000000002
> > > [ 26.725999] Arg3: 00000000de6cf5f1 <Obj>
> > > Buffer(8) 00 00 00 00 05 00 00 00
> > >
> > > [ 26.726010] ACPI Error: Aborting method \_SB.IETM._OSC due to
> > > previous error (AE_NOT_FOUND) (20240827/psparse-529)
> > > [ 26.726056] Consider using thermal netlink events interface
> > > [ 26.769209] r8169 0000:6c:00.0 enp108s0: Link is Down
> > > [ 26.857318] zram0: detected capacity change from 0 to 195035136
> > > [ 26.864390] vboxdrv: Found 32 processor cores/threads
> > > [ 26.873227] Adding 97517564k swap on /dev/zram0. Priority:-2
> > > extents:1 across:97517564k SS
> > > [ 26.880588] vboxdrv: TSC mode is Invariant, tentative frequency
> > > 2419194640 Hz
> > > [ 26.880592] vboxdrv: Successfully loaded version 7.2.4 r170995
> > > (interface 0x00340001)
> > > [ 26.895725] intel_pstate: Turbo is disabled
> > > [ 26.895730] intel_pstate: Turbo disabled by BIOS or unavailable
> > > on
> > > processor
> > > [ 26.943715] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION:
> > > 0x20
> > > [ 26.943746] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION:
> > > 0x1f
> > > [ 26.943755] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90
> > > [ 26.943765] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0
> > > [ 26.944901] iwlwifi 0000:00:14.3: RFIm is deactivated, reason =
> > > 5
> > > [ 27.045437] iwlwifi 0000:00:14.3: Registered PHC clock:
> > > iwlwifi- PTP, with index: 0
> > > [ 27.098590] VBoxNetFlt: Successfully started.
> > > [ 27.101687] VBoxNetAdp: Successfully started.
> > > [ 27.153602] bridge: filtering via arp/ip/ip6tables is no longer
> > > available by default. Update your scripts to load br_netfilter if
> > > you
> > > need this.
> > > [ 27.851014] loop14: detected capacity change from 0 to 8
> > > [ 27.895706] r8169 0000:6c:00.0: invalid VPD tag 0xff (size 0)
> > > at offset 0; assume missing optional EEPROM
> > > [ 28.898015] intel_pstate: Turbo is disabled
> > > [ 28.898021] intel_pstate: Turbo disabled by BIOS or unavailable
> > > on
> > > processor
> > > [ 31.900781] intel_pstate: Turbo is disabled
> > > [ 31.900788] intel_pstate: Turbo disabled by BIOS or unavailable
> > > on
> > > processor
> > > [ 33.959448] Bluetooth: RFCOMM TTY layer initialized
> > > [ 33.959456] Bluetooth: RFCOMM socket layer initialized
> > > [ 33.959462] Bluetooth: RFCOMM ver 1.11
> > > [ 36.903768] intel_pstate: Turbo is disabled
> > > [ 36.903777] intel_pstate: Turbo disabled by BIOS or unavailable
> > > on
> > > processor
> > > [ 38.054345] systemd-journald[883]:
> > > /var/log/journal/a9e8e3d2041547169b107e1e1a23f2ce/user-
> > > 1000.journal:
> > > Journal file uses a different sequence number ID, rotating.
> > > [ 39.799560] warning: `kded5' uses wireless extensions which
> > > will stop working for Wi-Fi 7 hardware; use nl80211
> > > [ 40.884365] wlp0s20f3: authenticate with 18:ee:86:8b:16:a2
> > > (local
> > > address=98:bd:80:8a:e9:27)
> > > [ 40.885147] wlp0s20f3: send auth to 18:ee:86:8b:16:a2 (try 1/3)
> > > [ 40.968595] wlp0s20f3: authenticate with 18:ee:86:8b:16:a2
> > > (local
> > > address=98:bd:80:8a:e9:27)
> > > [ 40.968603] wlp0s20f3: send auth to 18:ee:86:8b:16:a2 (try 1/3)
> > > [ 40.980941] wlp0s20f3: authenticated
> > > [ 40.981904] wlp0s20f3: associate with 18:ee:86:8b:16:a2 (try
> > > 1/3)
> > > [ 41.042933] wlp0s20f3: RX AssocResp from 18:ee:86:8b:16:a2
> > > (capab=0x1431 status=0 aid=14)
> > > [ 41.046917] wlp0s20f3: associated
> > >
> > > If you post the patch, I'm happy to add a `Tested-by` tag for it.
> > > Thank you for your help!
> > >
> > > > Thanks,
> > > > Srinivas
> > >
> > >
prev parent reply other threads:[~2025-11-11 0:38 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-29 21:07 [PATCH] cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode Srinivas Pandruvada
2025-04-30 14:29 ` Rafael J. Wysocki
2025-09-10 16:36 ` [REGRESSION] Intel Turbo Boost stuck disabled on some Clevo machines (was: [PATCH] cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode) Aaron Rainbolt
2025-09-10 17:15 ` srinivas pandruvada
2025-09-10 20:33 ` Aaron Rainbolt
2025-11-06 15:23 ` srinivas pandruvada
2025-11-06 17:31 ` Aaron Rainbolt
2025-11-06 17:44 ` srinivas pandruvada
2025-11-07 1:48 ` srinivas pandruvada
2025-11-10 16:58 ` srinivas pandruvada
2025-11-11 0:38 ` Aaron Rainbolt [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251110183807.5288bf8e@kf-m2g5 \
--to=arainbolt@kfocus.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mmikowski@kfocus.org \
--cc=rafael@kernel.org \
--cc=srinivas.pandruvada@linux.intel.com \
--cc=stable@vger.kernel.org \
--cc=trenn@suse.de \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).