FAILED: patch "[PATCH] usb: uas: fix urb unmapping issue when the uas device is" failed to apply to 5.10-stable tree

FAILED: patch "[PATCH] usb: uas: fix urb unmapping issue when the uas device is" failed to apply to 5.10-stable tree

[gregkh]

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 26d56a9fcb2014b99e654127960aa0a48a391e3c
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2025120132-patio-vocation-ff6a@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 26d56a9fcb2014b99e654127960aa0a48a391e3c Mon Sep 17 00:00:00 2001
From: Owen Gu <guhuinan@xiaomi.com>
Date: Thu, 20 Nov 2025 20:33:36 +0800
Subject: [PATCH] usb: uas: fix urb unmapping issue when the uas device is
 remove during ongoing data transfer

When a UAS device is unplugged during data transfer, there is
a probability of a system panic occurring. The root cause is
an access to an invalid memory address during URB callback handling.
Specifically, this happens when the dma_direct_unmap_sg() function
is called within the usb_hcd_unmap_urb_for_dma() interface, but the
sg->dma_address field is 0 and the sg data structure has already been
freed.

The SCSI driver sends transfer commands by invoking uas_queuecommand_lck()
in uas.c, using the uas_submit_urbs() function to submit requests to USB.
Within the uas_submit_urbs() implementation, three URBs (sense_urb,
data_urb, and cmd_urb) are sequentially submitted. Device removal may
occur at any point during uas_submit_urbs execution, which may result
in URB submission failure. However, some URBs might have been successfully
submitted before the failure, and uas_submit_urbs will return the -ENODEV
error code in this case. The current error handling directly calls
scsi_done(). In the SCSI driver, this eventually triggers scsi_complete()
to invoke scsi_end_request() for releasing the sgtable. The successfully
submitted URBs, when being unlinked to giveback, call
usb_hcd_unmap_urb_for_dma() in hcd.c, leading to exceptions during sg
unmapping operations since the sg data structure has already been freed.

This patch modifies the error condition check in the uas_submit_urbs()
function. When a UAS device is removed but one or more URBs have already
been successfully submitted to USB, it avoids immediately invoking
scsi_done() and save the cmnd to devinfo->cmnd array. If the successfully
submitted URBs is completed before devinfo->resetting being set, then
the scsi_done() function will be called within uas_try_complete() after
all pending URB operations are finalized. Otherwise, the scsi_done()
function will be called within uas_zap_pending(), which is executed after
usb_kill_anchored_urbs().

The error handling only takes effect when uas_queuecommand_lck() calls
uas_submit_urbs() and returns the error value -ENODEV . In this case,
the device is disconnected, and the flow proceeds to uas_disconnect(),
where uas_zap_pending() is invoked to call uas_try_complete().

Fixes: eb2a86ae8c54 ("USB: UAS: fix disconnect by unplugging a hub")
Cc: stable <stable@kernel.org>
Signed-off-by: Yu Chen <chenyu45@xiaomi.com>
Signed-off-by: Owen Gu <guhuinan@xiaomi.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20251120123336.3328-1-guhuinan@xiaomi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 4ed0dc19afe0..45b01df364f7 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -698,6 +698,10 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd)
 	 * of queueing, no matter how fatal the error
 	 */
 	if (err == -ENODEV) {
+		if (cmdinfo->state & (COMMAND_INFLIGHT | DATA_IN_URB_INFLIGHT |
+				DATA_OUT_URB_INFLIGHT))
+			goto out;
+
 		set_host_byte(cmnd, DID_NO_CONNECT);
 		scsi_done(cmnd);
 		goto zombie;
@@ -711,6 +715,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd)
 		uas_add_work(cmnd);
 	}
 
+out:
 	devinfo->cmnd[idx] = cmnd;
 zombie:
 	spin_unlock_irqrestore(&devinfo->lock, flags);

[PATCH 5.10.y] usb: uas: fix urb unmapping issue when the uas device is remove during ongoing data transfer

[Sasha Levin]

From: Owen Gu <guhuinan@xiaomi.com>

[ Upstream commit 26d56a9fcb2014b99e654127960aa0a48a391e3c ]

When a UAS device is unplugged during data transfer, there is
a probability of a system panic occurring. The root cause is
an access to an invalid memory address during URB callback handling.
Specifically, this happens when the dma_direct_unmap_sg() function
is called within the usb_hcd_unmap_urb_for_dma() interface, but the
sg->dma_address field is 0 and the sg data structure has already been
freed.

The SCSI driver sends transfer commands by invoking uas_queuecommand_lck()
in uas.c, using the uas_submit_urbs() function to submit requests to USB.
Within the uas_submit_urbs() implementation, three URBs (sense_urb,
data_urb, and cmd_urb) are sequentially submitted. Device removal may
occur at any point during uas_submit_urbs execution, which may result
in URB submission failure. However, some URBs might have been successfully
submitted before the failure, and uas_submit_urbs will return the -ENODEV
error code in this case. The current error handling directly calls
scsi_done(). In the SCSI driver, this eventually triggers scsi_complete()
to invoke scsi_end_request() for releasing the sgtable. The successfully
submitted URBs, when being unlinked to giveback, call
usb_hcd_unmap_urb_for_dma() in hcd.c, leading to exceptions during sg
unmapping operations since the sg data structure has already been freed.

This patch modifies the error condition check in the uas_submit_urbs()
function. When a UAS device is removed but one or more URBs have already
been successfully submitted to USB, it avoids immediately invoking
scsi_done() and save the cmnd to devinfo->cmnd array. If the successfully
submitted URBs is completed before devinfo->resetting being set, then
the scsi_done() function will be called within uas_try_complete() after
all pending URB operations are finalized. Otherwise, the scsi_done()
function will be called within uas_zap_pending(), which is executed after
usb_kill_anchored_urbs().

The error handling only takes effect when uas_queuecommand_lck() calls
uas_submit_urbs() and returns the error value -ENODEV . In this case,
the device is disconnected, and the flow proceeds to uas_disconnect(),
where uas_zap_pending() is invoked to call uas_try_complete().

Fixes: eb2a86ae8c54 ("USB: UAS: fix disconnect by unplugging a hub")
Cc: stable <stable@kernel.org>
Signed-off-by: Yu Chen <chenyu45@xiaomi.com>
Signed-off-by: Owen Gu <guhuinan@xiaomi.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20251120123336.3328-1-guhuinan@xiaomi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ adapted scsi_done(cmnd) helper to older cmnd->scsi_done(cmnd) callback API ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/storage/uas.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index ea1680c4cc065..eab64154e8697 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -705,7 +705,11 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 	 * of queueing, no matter how fatal the error
 	 */
 	if (err == -ENODEV) {
-		set_host_byte(cmnd, DID_ERROR);
+		if (cmdinfo->state & (COMMAND_INFLIGHT | DATA_IN_URB_INFLIGHT |
+				DATA_OUT_URB_INFLIGHT))
+			goto out;
+
+		set_host_byte(cmnd, DID_NO_CONNECT);
 		cmnd->scsi_done(cmnd);
 		goto zombie;
 	}
@@ -718,6 +722,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 		uas_add_work(cmdinfo);
 	}
 
+out:
 	devinfo->cmnd[idx] = cmnd;
 zombie:
 	spin_unlock_irqrestore(&devinfo->lock, flags);
-- 
2.51.0