From: <gregkh@linuxfoundation.org>
To: biju.das.jz@bp.renesas.com,mkl@pengutronix.de
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] can: rcar_canfd: Fix CAN-FD mode as default" failed to apply to 6.12-stable tree
Date: Mon, 01 Dec 2025 16:58:55 +0100 [thread overview]
Message-ID: <2025120155-wrench-aching-b242@gregkh> (raw)
The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x 6d849ff573722afcf5508d2800017bdd40f27eb9
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2025120155-wrench-aching-b242@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6d849ff573722afcf5508d2800017bdd40f27eb9 Mon Sep 17 00:00:00 2001
From: Biju Das <biju.das.jz@bp.renesas.com>
Date: Tue, 18 Nov 2025 12:39:25 +0000
Subject: [PATCH] can: rcar_canfd: Fix CAN-FD mode as default
The commit 5cff263606a1 ("can: rcar_canfd: Fix controller mode setting")
has aligned with the flow mentioned in the hardware manual for all SoCs
except R-Car Gen3 and RZ/G2L SoCs. On R-Car Gen4 and RZ/G3E SoCs, due to
the wrong logic in the commit[1] sets the default mode to FD-Only mode
instead of CAN-FD mode.
This patch sets the CAN-FD mode as the default for all SoCs by dropping
the rcar_canfd_set_mode() as some SoC requires mode setting in global
reset mode, and the rest of the SoCs in channel reset mode and update the
rcar_canfd_reset_controller() to take care of these constraints. Moreover,
the RZ/G3E and R-Car Gen4 SoCs support 3 modes compared to 2 modes on the
R-Car Gen3. Use inverted logic in rcar_canfd_reset_controller() to
simplify the code later to support FD-only mode.
[1]
commit 45721c406dcf ("can: rcar_canfd: Add support for r8a779a0 SoC")
Fixes: 5cff263606a1 ("can: rcar_canfd: Fix controller mode setting")
Cc: stable@vger.kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251118123926.193445-1-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index 45d36adb51b7..4c0d7d26df9f 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -709,6 +709,11 @@ static void rcar_canfd_set_bit_reg(void __iomem *addr, u32 val)
rcar_canfd_update(val, val, addr);
}
+static void rcar_canfd_clear_bit_reg(void __iomem *addr, u32 val)
+{
+ rcar_canfd_update(val, 0, addr);
+}
+
static void rcar_canfd_update_bit_reg(void __iomem *addr, u32 mask, u32 val)
{
rcar_canfd_update(mask, val, addr);
@@ -755,25 +760,6 @@ static void rcar_canfd_set_rnc(struct rcar_canfd_global *gpriv, unsigned int ch,
rcar_canfd_set_bit(gpriv->base, RCANFD_GAFLCFG(w), rnc);
}
-static void rcar_canfd_set_mode(struct rcar_canfd_global *gpriv)
-{
- if (gpriv->info->ch_interface_mode) {
- u32 ch, val = gpriv->fdmode ? RCANFD_GEN4_FDCFG_FDOE
- : RCANFD_GEN4_FDCFG_CLOE;
-
- for_each_set_bit(ch, &gpriv->channels_mask,
- gpriv->info->max_channels)
- rcar_canfd_set_bit_reg(&gpriv->fcbase[ch].cfdcfg, val);
- } else {
- if (gpriv->fdmode)
- rcar_canfd_set_bit(gpriv->base, RCANFD_GRMCFG,
- RCANFD_GRMCFG_RCMC);
- else
- rcar_canfd_clear_bit(gpriv->base, RCANFD_GRMCFG,
- RCANFD_GRMCFG_RCMC);
- }
-}
-
static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv)
{
struct device *dev = &gpriv->pdev->dev;
@@ -806,6 +792,16 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv)
/* Reset Global error flags */
rcar_canfd_write(gpriv->base, RCANFD_GERFL, 0x0);
+ /* Set the controller into appropriate mode */
+ if (!gpriv->info->ch_interface_mode) {
+ if (gpriv->fdmode)
+ rcar_canfd_set_bit(gpriv->base, RCANFD_GRMCFG,
+ RCANFD_GRMCFG_RCMC);
+ else
+ rcar_canfd_clear_bit(gpriv->base, RCANFD_GRMCFG,
+ RCANFD_GRMCFG_RCMC);
+ }
+
/* Transition all Channels to reset mode */
for_each_set_bit(ch, &gpriv->channels_mask, gpriv->info->max_channels) {
rcar_canfd_clear_bit(gpriv->base,
@@ -823,10 +819,23 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv)
dev_dbg(dev, "channel %u reset failed\n", ch);
return err;
}
- }
- /* Set the controller into appropriate mode */
- rcar_canfd_set_mode(gpriv);
+ /* Set the controller into appropriate mode */
+ if (gpriv->info->ch_interface_mode) {
+ /* Do not set CLOE and FDOE simultaneously */
+ if (!gpriv->fdmode) {
+ rcar_canfd_clear_bit_reg(&gpriv->fcbase[ch].cfdcfg,
+ RCANFD_GEN4_FDCFG_FDOE);
+ rcar_canfd_set_bit_reg(&gpriv->fcbase[ch].cfdcfg,
+ RCANFD_GEN4_FDCFG_CLOE);
+ } else {
+ rcar_canfd_clear_bit_reg(&gpriv->fcbase[ch].cfdcfg,
+ RCANFD_GEN4_FDCFG_FDOE);
+ rcar_canfd_clear_bit_reg(&gpriv->fcbase[ch].cfdcfg,
+ RCANFD_GEN4_FDCFG_CLOE);
+ }
+ }
+ }
return 0;
}
next reply other threads:[~2025-12-01 15:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-01 15:58 gregkh [this message]
2025-12-01 22:50 ` [PATCH 6.12.y] can: rcar_canfd: Fix CAN-FD mode as default Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2025120155-wrench-aching-b242@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=biju.das.jz@bp.renesas.com \
--cc=mkl@pengutronix.de \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox