[PATCH v3 1/8] ASoC: SOF: ipc4-control: If there is no data do not send bytes update

[Peter Ujfalusi <peter.ujfalusi@linux.intel.com>]

When the bytes control have no data (payload) then there is no need to send
an IPC message as there is nothing to send.

Fixes: a062c8899fed ("ASoC: SOF: ipc4-control: Add support for bytes control get and put")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
---
 sound/soc/sof/ipc4-control.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/sound/soc/sof/ipc4-control.c b/sound/soc/sof/ipc4-control.c
index 976a4794d610..0a05f66ec7d9 100644
--- a/sound/soc/sof/ipc4-control.c
+++ b/sound/soc/sof/ipc4-control.c
@@ -412,8 +412,16 @@ static int sof_ipc4_set_get_bytes_data(struct snd_sof_dev *sdev,
 	int ret = 0;
 
 	/* Send the new data to the firmware only if it is powered up */
-	if (set && !pm_runtime_active(sdev->dev))
-		return 0;
+	if (set) {
+		if (!pm_runtime_active(sdev->dev))
+			return 0;
+
+		if (!data->size) {
+			dev_dbg(sdev->dev, "%s: No data to be sent.\n",
+				scontrol->name);
+			return 0;
+		}
+	}
 
 	msg->extension = SOF_IPC4_MOD_EXT_MSG_PARAM_ID(data->type);
 
-- 
2.52.0