From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Benjamin Gaignard <benjamin.gaignard@collabora.com>,
Andrzej Pietrasiewicz <andrzej.p@collabora.com>,
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>,
Philipp Zabel <p.zabel@pengutronix.de>,
Hans Verkuil <hverkuil-cisco@xs4all.nl>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.6.y 2/3] media: verisilicon: g2: Use common helpers to compute chroma and mv offsets
Date: Mon, 5 Jan 2026 11:48:59 -0500 [thread overview]
Message-ID: <20260105164900.2676927-2-sashal@kernel.org> (raw)
In-Reply-To: <20260105164900.2676927-1-sashal@kernel.org>
From: Benjamin Gaignard <benjamin.gaignard@collabora.com>
[ Upstream commit 3eeaee737dcee3c32e256870dbc2687a2a6fe970 ]
HEVC and VP9 are running on the same hardware and share the same
chroma and motion vectors offset constraint.
Create common helpers functions for these computation.
Source and destination buffer height may not be the same because
alignment constraint are different so use destination height to
compute chroma offset because we target this buffer as hardware
output.
To be able to use the helpers in both VP9 HEVC code remove dec_params
and use context->bit_depth instead.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
CC: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: 19c286b75507 ("media: verisilicon: Fix CPU stalls on G2 bus error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../media/platform/verisilicon/hantro_g2.c | 14 ++++++++++
.../platform/verisilicon/hantro_g2_hevc_dec.c | 18 ++-----------
.../platform/verisilicon/hantro_g2_vp9_dec.c | 26 +++----------------
.../media/platform/verisilicon/hantro_hw.h | 3 +++
4 files changed, 23 insertions(+), 38 deletions(-)
diff --git a/drivers/media/platform/verisilicon/hantro_g2.c b/drivers/media/platform/verisilicon/hantro_g2.c
index ee5f14c5f8f2..b880a6849d58 100644
--- a/drivers/media/platform/verisilicon/hantro_g2.c
+++ b/drivers/media/platform/verisilicon/hantro_g2.c
@@ -8,6 +8,8 @@
#include "hantro_hw.h"
#include "hantro_g2_regs.h"
+#define G2_ALIGN 16
+
void hantro_g2_check_idle(struct hantro_dev *vpu)
{
int i;
@@ -42,3 +44,15 @@ irqreturn_t hantro_g2_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
+
+size_t hantro_g2_chroma_offset(struct hantro_ctx *ctx)
+{
+ return ctx->dst_fmt.width * ctx->dst_fmt.height * ctx->bit_depth / 8;
+}
+
+size_t hantro_g2_motion_vectors_offset(struct hantro_ctx *ctx)
+{
+ size_t cr_offset = hantro_g2_chroma_offset(ctx);
+
+ return ALIGN((cr_offset * 3) / 2, G2_ALIGN);
+}
diff --git a/drivers/media/platform/verisilicon/hantro_g2_hevc_dec.c b/drivers/media/platform/verisilicon/hantro_g2_hevc_dec.c
index d1971af5f7fa..78eb52edd5c3 100644
--- a/drivers/media/platform/verisilicon/hantro_g2_hevc_dec.c
+++ b/drivers/media/platform/verisilicon/hantro_g2_hevc_dec.c
@@ -8,20 +8,6 @@
#include "hantro_hw.h"
#include "hantro_g2_regs.h"
-#define G2_ALIGN 16
-
-static size_t hantro_hevc_chroma_offset(struct hantro_ctx *ctx)
-{
- return ctx->dst_fmt.width * ctx->dst_fmt.height * ctx->bit_depth / 8;
-}
-
-static size_t hantro_hevc_motion_vectors_offset(struct hantro_ctx *ctx)
-{
- size_t cr_offset = hantro_hevc_chroma_offset(ctx);
-
- return ALIGN((cr_offset * 3) / 2, G2_ALIGN);
-}
-
static void prepare_tile_info_buffer(struct hantro_ctx *ctx)
{
struct hantro_dev *vpu = ctx->dev;
@@ -384,8 +370,8 @@ static int set_ref(struct hantro_ctx *ctx)
struct hantro_dev *vpu = ctx->dev;
struct vb2_v4l2_buffer *vb2_dst;
struct hantro_decoded_buffer *dst;
- size_t cr_offset = hantro_hevc_chroma_offset(ctx);
- size_t mv_offset = hantro_hevc_motion_vectors_offset(ctx);
+ size_t cr_offset = hantro_g2_chroma_offset(ctx);
+ size_t mv_offset = hantro_g2_motion_vectors_offset(ctx);
u32 max_ref_frames;
u16 dpb_longterm_e;
static const struct hantro_reg cur_poc[] = {
diff --git a/drivers/media/platform/verisilicon/hantro_g2_vp9_dec.c b/drivers/media/platform/verisilicon/hantro_g2_vp9_dec.c
index 6db1c32fce4d..342e543dee4c 100644
--- a/drivers/media/platform/verisilicon/hantro_g2_vp9_dec.c
+++ b/drivers/media/platform/verisilicon/hantro_g2_vp9_dec.c
@@ -16,8 +16,6 @@
#include "hantro_vp9.h"
#include "hantro_g2_regs.h"
-#define G2_ALIGN 16
-
enum hantro_ref_frames {
INTRA_FRAME = 0,
LAST_FRAME = 1,
@@ -90,22 +88,6 @@ static int start_prepare_run(struct hantro_ctx *ctx, const struct v4l2_ctrl_vp9_
return 0;
}
-static size_t chroma_offset(const struct hantro_ctx *ctx,
- const struct v4l2_ctrl_vp9_frame *dec_params)
-{
- int bytes_per_pixel = dec_params->bit_depth == 8 ? 1 : 2;
-
- return ctx->src_fmt.width * ctx->src_fmt.height * bytes_per_pixel;
-}
-
-static size_t mv_offset(const struct hantro_ctx *ctx,
- const struct v4l2_ctrl_vp9_frame *dec_params)
-{
- size_t cr_offset = chroma_offset(ctx, dec_params);
-
- return ALIGN((cr_offset * 3) / 2, G2_ALIGN);
-}
-
static struct hantro_decoded_buffer *
get_ref_buf(struct hantro_ctx *ctx, struct vb2_v4l2_buffer *dst, u64 timestamp)
{
@@ -156,13 +138,13 @@ static void config_output(struct hantro_ctx *ctx,
luma_addr = hantro_get_dec_buf_addr(ctx, &dst->base.vb.vb2_buf);
hantro_write_addr(ctx->dev, G2_OUT_LUMA_ADDR, luma_addr);
- chroma_addr = luma_addr + chroma_offset(ctx, dec_params);
+ chroma_addr = luma_addr + hantro_g2_chroma_offset(ctx);
hantro_write_addr(ctx->dev, G2_OUT_CHROMA_ADDR, chroma_addr);
- dst->vp9.chroma_offset = chroma_offset(ctx, dec_params);
+ dst->vp9.chroma_offset = hantro_g2_chroma_offset(ctx);
- mv_addr = luma_addr + mv_offset(ctx, dec_params);
+ mv_addr = luma_addr + hantro_g2_motion_vectors_offset(ctx);
hantro_write_addr(ctx->dev, G2_OUT_MV_ADDR, mv_addr);
- dst->vp9.mv_offset = mv_offset(ctx, dec_params);
+ dst->vp9.mv_offset = hantro_g2_motion_vectors_offset(ctx);
}
struct hantro_vp9_ref_reg {
diff --git a/drivers/media/platform/verisilicon/hantro_hw.h b/drivers/media/platform/verisilicon/hantro_hw.h
index 7f33f7b07ce4..c7a2a20c70b7 100644
--- a/drivers/media/platform/verisilicon/hantro_hw.h
+++ b/drivers/media/platform/verisilicon/hantro_hw.h
@@ -519,6 +519,9 @@ hantro_av1_mv_size(unsigned int width, unsigned int height)
return ALIGN(num_sbs * 384, 16) * 2 + 512;
}
+size_t hantro_g2_chroma_offset(struct hantro_ctx *ctx);
+size_t hantro_g2_motion_vectors_offset(struct hantro_ctx *ctx);
+
int hantro_g1_mpeg2_dec_run(struct hantro_ctx *ctx);
int rockchip_vpu2_mpeg2_dec_run(struct hantro_ctx *ctx);
void hantro_mpeg2_dec_copy_qtable(u8 *qtable,
--
2.51.0
next prev parent reply other threads:[~2026-01-05 16:49 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-05 10:41 FAILED: patch "[PATCH] media: verisilicon: Fix CPU stalls on G2 bus error" failed to apply to 6.6-stable tree gregkh
2026-01-05 16:48 ` [PATCH 6.6.y 1/3] media: verisilicon: Store chroma and motion vectors offset Sasha Levin
2026-01-05 16:48 ` Sasha Levin [this message]
2026-01-05 16:49 ` [PATCH 6.6.y 3/3] media: verisilicon: Fix CPU stalls on G2 bus error Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260105164900.2676927-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=andrzej.p@collabora.com \
--cc=benjamin.gaignard@collabora.com \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=hverkuil-cisco@xs4all.nl \
--cc=mchehab@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox