From: Farhan Ali <alifm@linux.ibm.com>
To: alifm@linux.ibm.com
Cc: stable@vger.kernel.org
Subject: [PATCH v7 1/9] PCI: Allow per function PCI slots
Date: Wed, 7 Jan 2026 10:30:43 -0800 [thread overview]
Message-ID: <20260107183052.1333-2-alifm@linux.ibm.com> (raw)
In-Reply-To: <20260107183052.1333-1-alifm@linux.ibm.com>
On s390 systems, which use a machine level hypervisor, PCI devices are
always accessed through a form of PCI pass-through which fundamentally
operates on a per PCI function granularity. This is also reflected in the
s390 PCI hotplug driver which creates hotplug slots for individual PCI
functions. Its reset_slot() function, which is a wrapper for
zpci_hot_reset_device(), thus also resets individual functions.
Currently, the kernel's PCI_SLOT() macro assigns the same pci_slot object
to multifunction devices. This approach worked fine on s390 systems that
only exposed virtual functions as individual PCI domains to the operating
system. Since commit 44510d6fa0c0 ("s390/pci: Handling multifunctions")
s390 supports exposing the topology of multifunction PCI devices by
grouping them in a shared PCI domain. When attempting to reset a function
through the hotplug driver, the shared slot assignment causes the wrong
function to be reset instead of the intended one. It also leaks memory as
we do create a pci_slot object for the function, but don't correctly free
it in pci_slot_release().
Add a flag for struct pci_slot to allow per function PCI slots for
functions managed through a hypervisor, which exposes individual PCI
functions while retaining the topology.
Fixes: 44510d6fa0c0 ("s390/pci: Handling multifunctions")
Cc: stable@vger.kernel.org
Suggested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
---
drivers/pci/pci.c | 5 +++--
drivers/pci/slot.c | 25 ++++++++++++++++++++++---
include/linux/pci.h | 1 +
3 files changed, 26 insertions(+), 5 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 13dbb405dc31..c105e285cff8 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -4832,8 +4832,9 @@ static int pci_reset_hotplug_slot(struct hotplug_slot *hotplug, bool probe)
static int pci_dev_reset_slot_function(struct pci_dev *dev, bool probe)
{
- if (dev->multifunction || dev->subordinate || !dev->slot ||
- dev->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET)
+ if (dev->subordinate || !dev->slot ||
+ dev->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET ||
+ (dev->multifunction && !dev->slot->per_func_slot))
return -ENOTTY;
return pci_reset_hotplug_slot(dev->slot->hotplug, probe);
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index 50fb3eb595fe..ed10fa3ae727 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -63,6 +63,22 @@ static ssize_t cur_speed_read_file(struct pci_slot *slot, char *buf)
return bus_speed_read(slot->bus->cur_bus_speed, buf);
}
+static bool pci_dev_matches_slot(struct pci_dev *dev, struct pci_slot *slot)
+{
+ if (slot->per_func_slot)
+ return dev->devfn == slot->number;
+
+ return PCI_SLOT(dev->devfn) == slot->number;
+}
+
+static bool pci_slot_enabled_per_func(void)
+{
+ if (IS_ENABLED(CONFIG_S390))
+ return true;
+
+ return false;
+}
+
static void pci_slot_release(struct kobject *kobj)
{
struct pci_dev *dev;
@@ -73,7 +89,7 @@ static void pci_slot_release(struct kobject *kobj)
down_read(&pci_bus_sem);
list_for_each_entry(dev, &slot->bus->devices, bus_list)
- if (PCI_SLOT(dev->devfn) == slot->number)
+ if (pci_dev_matches_slot(dev, slot))
dev->slot = NULL;
up_read(&pci_bus_sem);
@@ -166,7 +182,7 @@ void pci_dev_assign_slot(struct pci_dev *dev)
mutex_lock(&pci_slot_mutex);
list_for_each_entry(slot, &dev->bus->slots, list)
- if (PCI_SLOT(dev->devfn) == slot->number)
+ if (pci_dev_matches_slot(dev, slot))
dev->slot = slot;
mutex_unlock(&pci_slot_mutex);
}
@@ -265,6 +281,9 @@ struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr,
slot->bus = pci_bus_get(parent);
slot->number = slot_nr;
+ if (pci_slot_enabled_per_func())
+ slot->per_func_slot = 1;
+
slot->kobj.kset = pci_slots_kset;
slot_name = make_slot_name(name);
@@ -285,7 +304,7 @@ struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr,
down_read(&pci_bus_sem);
list_for_each_entry(dev, &parent->devices, bus_list)
- if (PCI_SLOT(dev->devfn) == slot_nr)
+ if (pci_dev_matches_slot(dev, slot))
dev->slot = slot;
up_read(&pci_bus_sem);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 864775651c6f..08fa57beb7b2 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -78,6 +78,7 @@ struct pci_slot {
struct list_head list; /* Node in list of slots */
struct hotplug_slot *hotplug; /* Hotplug info (move here) */
unsigned char number; /* PCI_SLOT(pci_dev->devfn) */
+ unsigned int per_func_slot:1; /* Allow per function slot */
struct kobject kobj;
};
--
2.43.0
next parent reply other threads:[~2026-01-07 18:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20260107183052.1333-1-alifm@linux.ibm.com>
2026-01-07 18:30 ` Farhan Ali [this message]
2026-01-07 18:32 [PATCH v7 0/9] Error recovery for vfio-pci devices on s390x Farhan Ali
2026-01-07 18:32 ` [PATCH v7 1/9] PCI: Allow per function PCI slots Farhan Ali
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260107183052.1333-2-alifm@linux.ibm.com \
--to=alifm@linux.ibm.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox