[PATCH 6.1 00/72] 6.1.161-rc1 review

[PATCH 6.1 00/72] 6.1.161-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 6.1.161 release.
There are 72 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat, 17 Jan 2026 16:41:26 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.161-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 6.1.161-rc1

Shardul Bankar <shardulsb08@gmail.com>
    bpf: test_run: Fix ctx leak in bpf_prog_test_run_xdp error path

Michal Rábek <mrabek@redhat.com>
    scsi: sg: Fix occasional bogus elapsed time that exceeds timeout

Alexander Stein <alexander.stein@ew.tq-group.com>
    ASoC: fsl_sai: Add missing registers to cache default

Andrew Elantsev <elantsew.andrew@gmail.com>
    ASoC: amd: yc: Add quirk for Honor MagicBook X16 2025

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    can: j1939: make j1939_session_activate() fail if device is no longer registered

Sumeet Pawnikar <sumeet4linux@gmail.com>
    powercap: fix sscanf() error return value handling

Sumeet Pawnikar <sumeet4linux@gmail.com>
    powercap: fix race condition in register_control_type()

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    bpf: Fix reference count leak in bpf_prog_test_run_xdp()

Toke Høiland-Jørgensen <toke@redhat.com>
    bpf, test_run: Subtract size of xdp_frame from allowed metadata size

Amery Hung <ameryhung@gmail.com>
    bpf: Support specifying linear xdp packet data size for BPF_PROG_TEST_RUN

Amery Hung <ameryhung@gmail.com>
    bpf: Make variables in bpf_prog_test_run_xdp less confusing

Yonghong Song <yonghong.song@linux.dev>
    bpf: Fix an issue in bpf_prog_test_run_xdp when page size greater than 4K

Chuck Lever <chuck.lever@oracle.com>
    NFSD: Remove NFSERR_EAGAIN

Mike Snitzer <snitzer@kernel.org>
    nfs_common: factor out nfs_errtbl and nfs_stat_to_errno

Chen Hanxiao <chenhx.fnst@fujitsu.com>
    NFS: trace: show TIMEDOUT instead of 0x6e

NeilBrown <neil@brown.name>
    nfsd: provide locking for v4_end_grace

Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
    ALSA: ac97: fix a double free in snd_ac97_controller_register()

Takashi Iwai <tiwai@suse.de>
    ALSA: ac97bus: Use guard() for mutex locks

Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
    ksm: use range-walk function to jump over holes in scan_get_next_rmap_item

David Hildenbrand <david@redhat.com>
    mm/pagewalk: add walk_page_range_vma()

Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
    pinctrl: qcom: lpass-lpi: mark the GPIO controller as sleeping

Eric Dumazet <edumazet@google.com>
    arp: do not assume dev_hard_header() does not change skb->head

Wei Fang <wei.fang@nxp.com>
    net: enetc: fix build warning when PAGE_SIZE is greater than 128K

Petko Manolov <petkan@nucleusys.com>
    net: usb: pegasus: fix memory leak in update_eth_regs_async()

Xiang Mei <xmei5@asu.edu>
    net/sched: sch_qfq: Fix NULL deref when deactivating inactive aggregate in qfq_reset

René Rebe <rene@exactco.de>
    HID: quirks: work around VID/PID conflict for appledisplay

Mohammad Heib <mheib@redhat.com>
    net: fix memory leak in skb_segment_list for GRO packets

Srijit Bose <srijit.bose@broadcom.com>
    bnxt_en: Fix potential data corruption with HW GRO/LRO

Jakub Kicinski <kuba@kernel.org>
    eth: bnxt: move and rename reset helpers

Zilin Guan <zilin@seu.edu.cn>
    net: wwan: iosm: Fix memory leak in ipc_mux_deinit()

Gal Pressman <gal@nvidia.com>
    net/mlx5e: Don't print error message due to invalid module

Di Zhu <zhud@hygon.cn>
    netdev: preserve NETIF_F_ALL_FOR_ALL across TSO updates

Weiming Shi <bestswngs@gmail.com>
    net: sock: fix hardened usercopy panic in sock_recv_errqueue

yuan.gao <yuan.gao@ucloud.cn>
    inet: ping: Fix icmp out counting

Jerry Wu <w.7erry@foxmail.com>
    net: mscc: ocelot: Fix crash when adding interface under a lag

Alexandre Knecht <knecht.alexandre@gmail.com>
    bridge: fix C-VLAN preservation in 802.1ad vlan_tunnel egress

Alok Tiwari <alok.a.tiwari@oracle.com>
    net: marvell: prestera: fix NULL dereference on devlink_alloc() failure

Fernando Fernandez Mancera <fmancera@suse.de>
    netfilter: nf_conncount: update last_gc only when GC has been performed

Zilin Guan <zilin@seu.edu.cn>
    netfilter: nf_tables: fix memory leak in nf_tables_newrule()

Fernando Fernandez Mancera <fmancera@suse.de>
    netfilter: nft_synproxy: avoid possible data-race on update operation

Marek Vasut <marek.vasut@mailbox.org>
    arm64: dts: imx8mp: Fix LAN8740Ai PHY reference clock on DH electronics i.MX8M Plus DHCOM

Ian Ray <ian.ray@gehealthcare.com>
    ARM: dts: imx6q-ba16: fix RTC interrupt level

Haibo Chen <haibo.chen@nxp.com>
    arm64: dts: add off-on-delay-us for usdhc2 regulator

Xingui Yang <yangxingui@huawei.com>
    scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"

Brian Kao <powenkao@google.com>
    scsi: ufs: core: Fix EH failure after W-LUN resume error

Wen Xiong <wenxiong@linux.ibm.com>
    scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset

ChenXiaoSong <chenxiaosong@kylinos.cn>
    smb/client: fix NT_STATUS_NO_DATA_DETECTED value

ChenXiaoSong <chenxiaosong@kylinos.cn>
    smb/client: fix NT_STATUS_DEVICE_DOOR_OPEN value

ChenXiaoSong <chenxiaosong@kylinos.cn>
    smb/client: fix NT_STATUS_UNABLE_TO_FREE_VM value

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFS: Fix up the automount fs_context to use the correct cred

Scott Mayhew <smayhew@redhat.com>
    NFSv4: ensure the open stateid seqid doesn't go backwards

Sam James <sam@gentoo.org>
    alpha: don't reference obsolete termio struct for TC* constants

Sebastian Andrzej Siewior <bigeasy@linutronix.de>
    ARM: 9461/1: Disable HIGHPTE on PREEMPT_RT kernels

Yang Li <yang.li85200@gmail.com>
    csky: fix csky_cmpxchg_fixup not working

Kuniyuki Iwashima <kuniyu@google.com>
    tls: Use __sk_dst_get() and dst_dev_rcu() in get_netdev_for_sock().

Sharath Chandra Vurukala <quic_sharathv@quicinc.com>
    net: Add locking to protect skb->dev access in ip_output

Ye Bin <yebin10@huawei.com>
    ext4: fix out-of-bound read in ext4_xattr_inode_dec_ref_all()

Ye Bin <yebin10@huawei.com>
    ext4: introduce ITAIL helper

Ilya Dryomov <idryomov@gmail.com>
    libceph: make calc_target() set t->paused, not just clear it

Ilya Dryomov <idryomov@gmail.com>
    libceph: return the handler error from mon_handle_auth_done()

Tuo Li <islituo@gmail.com>
    libceph: make free_choose_arg_map() resilient to partial allocation

Ilya Dryomov <idryomov@gmail.com>
    libceph: replace overzealous BUG_ON in osdmap_apply_incremental()

ziming zhang <ezrakiez@gmail.com>
    libceph: prevent potential out-of-bounds reads in handle_auth_done()

Eric Dumazet <edumazet@google.com>
    wifi: avoid kernel-infoleak from struct iw_point

Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
    gpio: rockchip: mark the GPIO controller as sleeping

Miaoqian Lin <linmq006@gmail.com>
    drm/pl111: Fix error handling in pl111_amba_probe

Alexander Sverdlin <alexander.sverdlin@siemens.com>
    counter: interrupt-cnt: Drop IRQF_NO_THREAD flag

Eric Biggers <ebiggers@kernel.org>
    lib/crypto: aes: Fix missing MMU protection for AES S-box

Alexander Usyskin <alexander.usyskin@intel.com>
    mei: me: add nova lake point S DID

Filipe Manana <fdmanana@suse.com>
    btrfs: always detect conflicting inodes when logging inode refs

Thomas Fourier <fourier.thomas@gmail.com>
    net: 3com: 3c59x: fix possible null dereference in vortex_probe1()

Thomas Fourier <fourier.thomas@gmail.com>
    atm: Fix dma_free_coherent() size


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/alpha/include/uapi/asm/ioctls.h               |   8 +-
 arch/arm/Kconfig                                   |   2 +-
 arch/arm/boot/dts/imx6q-ba16.dtsi                  |   2 +-
 .../arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi |   1 +
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts       |   1 +
 arch/csky/mm/fault.c                               |   4 +-
 drivers/atm/he.c                                   |   3 +-
 drivers/counter/interrupt-cnt.c                    |   3 +-
 drivers/gpio/gpio-rockchip.c                       |   1 +
 drivers/gpu/drm/pl111/pl111_drv.c                  |   2 +-
 drivers/hid/hid-quirks.c                           |   9 ++
 drivers/misc/mei/hw-me-regs.h                      |   2 +
 drivers/misc/mei/pci-me.c                          |   2 +
 drivers/net/ethernet/3com/3c59x.c                  |   2 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt.c          |  87 +++++++-------
 drivers/net/ethernet/broadcom/bnxt/bnxt.h          |   4 +-
 drivers/net/ethernet/freescale/enetc/enetc.h       |   4 +-
 .../ethernet/marvell/prestera/prestera_devlink.c   |   2 +
 drivers/net/ethernet/mellanox/mlx5/core/port.c     |   3 +-
 drivers/net/ethernet/mscc/ocelot.c                 |   6 +-
 drivers/net/usb/pegasus.c                          |   2 +
 drivers/net/wwan/iosm/iosm_ipc_mux.c               |   6 +
 drivers/pinctrl/qcom/pinctrl-lpass-lpi.c           |   2 +-
 drivers/powercap/powercap_sys.c                    |  22 ++--
 drivers/scsi/ipr.c                                 |  28 ++++-
 drivers/scsi/libsas/sas_internal.h                 |  14 ---
 drivers/scsi/sg.c                                  |  20 ++--
 drivers/ufs/core/ufshcd.c                          |  40 +++++--
 fs/btrfs/tree-log.c                                |   6 +-
 fs/ext4/inode.c                                    |   5 +
 fs/ext4/xattr.c                                    |  32 +-----
 fs/ext4/xattr.h                                    |  10 ++
 fs/nfs/Kconfig                                     |   1 +
 fs/nfs/namespace.c                                 |   5 +
 fs/nfs/nfs2xdr.c                                   |  70 +-----------
 fs/nfs/nfs3xdr.c                                   | 108 ++++--------------
 fs/nfs/nfs4proc.c                                  |  13 ++-
 fs/nfs/nfs4trace.h                                 |   1 +
 fs/nfs/nfs4xdr.c                                   |   4 +-
 fs/nfs_common/Makefile                             |   2 +
 fs/nfs_common/common.c                             |  66 +++++++++++
 fs/nfsd/Kconfig                                    |   1 +
 fs/nfsd/netns.h                                    |   2 +
 fs/nfsd/nfs4proc.c                                 |   2 +-
 fs/nfsd/nfs4state.c                                |  42 ++++++-
 fs/nfsd/nfsctl.c                                   |   3 +-
 fs/nfsd/nfsd.h                                     |   1 -
 fs/nfsd/state.h                                    |   2 +-
 fs/smb/client/nterr.h                              |   6 +-
 include/linux/netdevice.h                          |   3 +-
 include/linux/nfs_common.h                         |  16 +++
 include/linux/pagewalk.h                           |   3 +
 include/net/dst.h                                  |  12 ++
 include/trace/misc/nfs.h                           |   3 +-
 include/uapi/linux/nfs.h                           |   1 -
 lib/crypto/aes.c                                   |   4 +-
 mm/ksm.c                                           | 126 ++++++++++++++++++---
 mm/pagewalk.c                                      |  20 ++++
 net/bpf/test_run.c                                 |  60 ++++++----
 net/bridge/br_vlan_tunnel.c                        |  11 +-
 net/can/j1939/transport.c                          |   2 +
 net/ceph/messenger_v2.c                            |   2 +
 net/ceph/mon_client.c                              |   2 +-
 net/ceph/osd_client.c                              |  11 +-
 net/ceph/osdmap.c                                  |  24 ++--
 net/core/skbuff.c                                  |   8 +-
 net/core/sock.c                                    |   7 +-
 net/ipv4/arp.c                                     |   7 +-
 net/ipv4/ip_output.c                               |  16 ++-
 net/ipv4/ping.c                                    |   4 +-
 net/netfilter/nf_conncount.c                       |   2 +-
 net/netfilter/nf_tables_api.c                      |   3 +-
 net/netfilter/nft_synproxy.c                       |   6 +-
 net/sched/sch_qfq.c                                |   2 +-
 net/tls/tls_device.c                               |  18 +--
 net/wireless/wext-core.c                           |   4 +
 net/wireless/wext-priv.c                           |   4 +
 sound/ac97/bus.c                                   |  32 +++---
 sound/soc/amd/yc/acp6x-mach.c                      |   7 ++
 sound/soc/fsl/fsl_sai.c                            |   3 +
 .../selftests/bpf/prog_tests/xdp_adjust_tail.c     |  96 ++++++++++++++--
 .../bpf/prog_tests/xdp_context_test_run.c          |   4 +-
 .../bpf/progs/test_xdp_adjust_tail_grow.c          |   8 +-
 84 files changed, 776 insertions(+), 423 deletions(-)

[PATCH 6.1 01/72] atm: Fix dma_free_coherent() size

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Fourier <fourier.thomas@gmail.com>

commit 4d984b0574ff708e66152763fbfdef24ea40933f upstream.

The size of the buffer is not the same when alloc'd with
dma_alloc_coherent() in he_init_tpdrq() and freed.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260107090141.80900-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/atm/he.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -1587,7 +1587,8 @@ he_stop(struct he_dev *he_dev)
 				  he_dev->tbrq_base, he_dev->tbrq_phys);
 
 	if (he_dev->tpdrq_base)
-		dma_free_coherent(&he_dev->pci_dev->dev, CONFIG_TBRQ_SIZE * sizeof(struct he_tbrq),
+		dma_free_coherent(&he_dev->pci_dev->dev,
+				  CONFIG_TPDRQ_SIZE * sizeof(struct he_tpdrq),
 				  he_dev->tpdrq_base, he_dev->tpdrq_phys);
 
 	dma_pool_destroy(he_dev->tpd_pool);

[PATCH 6.1 02/72] net: 3com: 3c59x: fix possible null dereference in vortex_probe1()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Fourier <fourier.thomas@gmail.com>

commit a4e305ed60f7c41bbf9aabc16dd75267194e0de3 upstream.

pdev can be null and free_ring: can be called in 1297 with a null
pdev.

Fixes: 55c82617c3e8 ("3c59x: convert to generic DMA API")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260106094731.25819-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/3com/3c59x.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/3com/3c59x.c
+++ b/drivers/net/ethernet/3com/3c59x.c
@@ -1473,7 +1473,7 @@ static int vortex_probe1(struct device *
 		return 0;
 
 free_ring:
-	dma_free_coherent(&pdev->dev,
+	dma_free_coherent(gendev,
 		sizeof(struct boom_rx_desc) * RX_RING_SIZE +
 		sizeof(struct boom_tx_desc) * TX_RING_SIZE,
 		vp->rx_ring, vp->rx_ring_dma);

[PATCH 6.1 03/72] btrfs: always detect conflicting inodes when logging inode refs

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Filipe Manana <fdmanana@suse.com>

commit 7ba0b6461bc4edb3005ea6e00cdae189bcf908a5 upstream.

After rename exchanging (either with the rename exchange operation or
regular renames in multiple non-atomic steps) two inodes and at least
one of them is a directory, we can end up with a log tree that contains
only of the inodes and after a power failure that can result in an attempt
to delete the other inode when it should not because it was not deleted
before the power failure. In some case that delete attempt fails when
the target inode is a directory that contains a subvolume inside it, since
the log replay code is not prepared to deal with directory entries that
point to root items (only inode items).

1) We have directories "dir1" (inode A) and "dir2" (inode B) under the
   same parent directory;

2) We have a file (inode C) under directory "dir1" (inode A);

3) We have a subvolume inside directory "dir2" (inode B);

4) All these inodes were persisted in a past transaction and we are
   currently at transaction N;

5) We rename the file (inode C), so at btrfs_log_new_name() we update
   inode C's last_unlink_trans to N;

6) We get a rename exchange for "dir1" (inode A) and "dir2" (inode B),
   so after the exchange "dir1" is inode B and "dir2" is inode A.
   During the rename exchange we call btrfs_log_new_name() for inodes
   A and B, but because they are directories, we don't update their
   last_unlink_trans to N;

7) An fsync against the file (inode C) is done, and because its inode
   has a last_unlink_trans with a value of N we log its parent directory
   (inode A) (through btrfs_log_all_parents(), called from
   btrfs_log_inode_parent()).

8) So we end up with inode B not logged, which now has the old name
   of inode A. At copy_inode_items_to_log(), when logging inode A, we
   did not check if we had any conflicting inode to log because inode
   A has a generation lower than the current transaction (created in
   a past transaction);

9) After a power failure, when replaying the log tree, since we find that
   inode A has a new name that conflicts with the name of inode B in the
   fs tree, we attempt to delete inode B... this is wrong since that
   directory was never deleted before the power failure, and because there
   is a subvolume inside that directory, attempting to delete it will fail
   since replay_dir_deletes() and btrfs_unlink_inode() are not prepared
   to deal with dir items that point to roots instead of inodes.

   When that happens the mount fails and we get a stack trace like the
   following:

   [87.2314] BTRFS info (device dm-0): start tree-log replay
   [87.2318] BTRFS critical (device dm-0): failed to delete reference to subvol, root 5 inode 256 parent 259
   [87.2332] ------------[ cut here ]------------
   [87.2338] BTRFS: Transaction aborted (error -2)
   [87.2346] WARNING: CPU: 1 PID: 638968 at fs/btrfs/inode.c:4345 __btrfs_unlink_inode+0x416/0x440 [btrfs]
   [87.2368] Modules linked in: btrfs loop dm_thin_pool (...)
   [87.2470] CPU: 1 UID: 0 PID: 638968 Comm: mount Tainted: G        W           6.18.0-rc7-btrfs-next-218+ #2 PREEMPT(full)
   [87.2489] Tainted: [W]=WARN
   [87.2494] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
   [87.2514] RIP: 0010:__btrfs_unlink_inode+0x416/0x440 [btrfs]
   [87.2538] Code: c0 89 04 24 (...)
   [87.2568] RSP: 0018:ffffc0e741f4b9b8 EFLAGS: 00010286
   [87.2574] RAX: 0000000000000000 RBX: ffff9d3ec8a6cf60 RCX: 0000000000000000
   [87.2582] RDX: 0000000000000002 RSI: ffffffff84ab45a1 RDI: 00000000ffffffff
   [87.2591] RBP: ffff9d3ec8a6ef20 R08: 0000000000000000 R09: ffffc0e741f4b840
   [87.2599] R10: ffff9d45dc1fffa8 R11: 0000000000000003 R12: ffff9d3ee26d77e0
   [87.2608] R13: ffffc0e741f4ba98 R14: ffff9d4458040800 R15: ffff9d44b6b7ca10
   [87.2618] FS:  00007f7b9603a840(0000) GS:ffff9d4658982000(0000) knlGS:0000000000000000
   [87.2629] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
   [87.2637] CR2: 00007ffc9ec33b98 CR3: 000000011273e003 CR4: 0000000000370ef0
   [87.2648] Call Trace:
   [87.2651]  <TASK>
   [87.2654]  btrfs_unlink_inode+0x15/0x40 [btrfs]
   [87.2661]  unlink_inode_for_log_replay+0x27/0xf0 [btrfs]
   [87.2669]  check_item_in_log+0x1ea/0x2c0 [btrfs]
   [87.2676]  replay_dir_deletes+0x16b/0x380 [btrfs]
   [87.2684]  fixup_inode_link_count+0x34b/0x370 [btrfs]
   [87.2696]  fixup_inode_link_counts+0x41/0x160 [btrfs]
   [87.2703]  btrfs_recover_log_trees+0x1ff/0x7c0 [btrfs]
   [87.2711]  ? __pfx_replay_one_buffer+0x10/0x10 [btrfs]
   [87.2719]  open_ctree+0x10bb/0x15f0 [btrfs]
   [87.2726]  btrfs_get_tree.cold+0xb/0x16c [btrfs]
   [87.2734]  ? fscontext_read+0x15c/0x180
   [87.2740]  ? rw_verify_area+0x50/0x180
   [87.2746]  vfs_get_tree+0x25/0xd0
   [87.2750]  vfs_cmd_create+0x59/0xe0
   [87.2755]  __do_sys_fsconfig+0x4f6/0x6b0
   [87.2760]  do_syscall_64+0x50/0x1220
   [87.2764]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
   [87.2770] RIP: 0033:0x7f7b9625f4aa
   [87.2775] Code: 73 01 c3 48 (...)
   [87.2803] RSP: 002b:00007ffc9ec35b08 EFLAGS: 00000246 ORIG_RAX: 00000000000001af
   [87.2817] RAX: ffffffffffffffda RBX: 0000558bfa91ac20 RCX: 00007f7b9625f4aa
   [87.2829] RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000003
   [87.2842] RBP: 0000558bfa91b120 R08: 0000000000000000 R09: 0000000000000000
   [87.2854] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
   [87.2864] R13: 00007f7b963f1580 R14: 00007f7b963f326c R15: 00007f7b963d8a23
   [87.2877]  </TASK>
   [87.2882] ---[ end trace 0000000000000000 ]---
   [87.2891] BTRFS: error (device dm-0 state A) in __btrfs_unlink_inode:4345: errno=-2 No such entry
   [87.2904] BTRFS: error (device dm-0 state EAO) in do_abort_log_replay:191: errno=-2 No such entry
   [87.2915] BTRFS critical (device dm-0 state EAO): log tree (for root 5) leaf currently being processed (slot 7 key (258 12 257)):
   [87.2929] BTRFS info (device dm-0 state EAO): leaf 30736384 gen 10 total ptrs 7 free space 15712 owner 18446744073709551610
   [87.2929] BTRFS info (device dm-0 state EAO): refs 3 lock_owner 0 current 638968
   [87.2929]      item 0 key (257 INODE_ITEM 0) itemoff 16123 itemsize 160
   [87.2929]              inode generation 9 transid 10 size 0 nbytes 0
   [87.2929]              block group 0 mode 40755 links 1 uid 0 gid 0
   [87.2929]              rdev 0 sequence 7 flags 0x0
   [87.2929]              atime 1765464494.678070921
   [87.2929]              ctime 1765464494.686606513
   [87.2929]              mtime 1765464494.686606513
   [87.2929]              otime 1765464494.678070921
   [87.2929]      item 1 key (257 INODE_REF 256) itemoff 16109 itemsize 14
   [87.2929]              index 4 name_len 4
   [87.2929]      item 2 key (257 DIR_LOG_INDEX 2) itemoff 16101 itemsize 8
   [87.2929]              dir log end 2
   [87.2929]      item 3 key (257 DIR_LOG_INDEX 3) itemoff 16093 itemsize 8
   [87.2929]              dir log end 18446744073709551615
   [87.2930]      item 4 key (257 DIR_INDEX 3) itemoff 16060 itemsize 33
   [87.2930]              location key (258 1 0) type 1
   [87.2930]              transid 10 data_len 0 name_len 3
   [87.2930]      item 5 key (258 INODE_ITEM 0) itemoff 15900 itemsize 160
   [87.2930]              inode generation 9 transid 10 size 0 nbytes 0
   [87.2930]              block group 0 mode 100644 links 1 uid 0 gid 0
   [87.2930]              rdev 0 sequence 2 flags 0x0
   [87.2930]              atime 1765464494.678456467
   [87.2930]              ctime 1765464494.686606513
   [87.2930]              mtime 1765464494.678456467
   [87.2930]              otime 1765464494.678456467
   [87.2930]      item 6 key (258 INODE_REF 257) itemoff 15887 itemsize 13
   [87.2930]              index 3 name_len 3
   [87.2930] BTRFS critical (device dm-0 state EAO): log replay failed in unlink_inode_for_log_replay:1045 for root 5, stage 3, with error -2: failed to unlink inode 256 parent dir 259 name subvol root 5
   [87.2963] BTRFS: error (device dm-0 state EAO) in btrfs_recover_log_trees:7743: errno=-2 No such entry
   [87.2981] BTRFS: error (device dm-0 state EAO) in btrfs_replay_log:2083: errno=-2 No such entry (Failed to recover log tr

So fix this by changing copy_inode_items_to_log() to always detect if
there are conflicting inodes for the ref/extref of the inode being logged
even if the inode was created in a past transaction.

A test case for fstests will follow soon.

CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/tree-log.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -5940,10 +5940,8 @@ again:
 			 * and no keys greater than that, so bail out.
 			 */
 			break;
-		} else if ((min_key->type == BTRFS_INODE_REF_KEY ||
-			    min_key->type == BTRFS_INODE_EXTREF_KEY) &&
-			   (inode->generation == trans->transid ||
-			    ctx->logging_conflict_inodes)) {
+		} else if (min_key->type == BTRFS_INODE_REF_KEY ||
+			   min_key->type == BTRFS_INODE_EXTREF_KEY) {
 			u64 other_ino = 0;
 			u64 other_parent = 0;
 

[PATCH 6.1 04/72] mei: me: add nova lake point S DID

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Usyskin <alexander.usyskin@intel.com>

commit 420f423defcf6d0af2263d38da870ca4a20c0990 upstream.

Add Nova Lake S device id.

Cc: stable <stable@kernel.org>
Co-developed-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251215105915.1672659-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/misc/mei/hw-me-regs.h |    2 ++
 drivers/misc/mei/pci-me.c     |    2 ++
 2 files changed, 4 insertions(+)

--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -122,6 +122,8 @@
 
 #define MEI_DEV_ID_WCL_P      0x4D70  /* Wildcat Lake P */
 
+#define MEI_DEV_ID_NVL_S      0x6E68  /* Nova Lake Point S */
+
 /*
  * MEI HW Section
  */
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -129,6 +129,8 @@ static const struct pci_device_id mei_me
 
 	{MEI_PCI_DEVICE(MEI_DEV_ID_WCL_P, MEI_ME_PCH15_CFG)},
 
+	{MEI_PCI_DEVICE(MEI_DEV_ID_NVL_S, MEI_ME_PCH15_CFG)},
+
 	/* required last entry */
 	{0, }
 };

[PATCH 6.1 05/72] lib/crypto: aes: Fix missing MMU protection for AES S-box

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@kernel.org>

commit 74d74bb78aeccc9edc10db216d6be121cf7ec176 upstream.

__cacheline_aligned puts the data in the ".data..cacheline_aligned"
section, which isn't marked read-only i.e. it doesn't receive MMU
protection.  Replace it with ____cacheline_aligned which does the right
thing and just aligns the data while keeping it in ".rodata".

Fixes: b5e0b032b6c3 ("crypto: aes - add generic time invariant AES cipher")
Cc: stable@vger.kernel.org
Reported-by: Qingfang Deng <dqfext@gmail.com>
Closes: https://lore.kernel.org/r/20260105074712.498-1-dqfext@gmail.com/
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260107052023.174620-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 lib/crypto/aes.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/lib/crypto/aes.c
+++ b/lib/crypto/aes.c
@@ -12,7 +12,7 @@
  * Emit the sbox as volatile const to prevent the compiler from doing
  * constant folding on sbox references involving fixed indexes.
  */
-static volatile const u8 __cacheline_aligned aes_sbox[] = {
+static volatile const u8 ____cacheline_aligned aes_sbox[] = {
 	0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5,
 	0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76,
 	0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0,
@@ -47,7 +47,7 @@ static volatile const u8 __cacheline_ali
 	0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16,
 };
 
-static volatile const u8 __cacheline_aligned aes_inv_sbox[] = {
+static volatile const u8 ____cacheline_aligned aes_inv_sbox[] = {
 	0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38,
 	0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb,
 	0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87,

[PATCH 6.1 06/72] counter: interrupt-cnt: Drop IRQF_NO_THREAD flag

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Sverdlin <alexander.sverdlin@siemens.com>

commit 23f9485510c338476b9735d516c1d4aacb810d46 upstream.

An IRQ handler can either be IRQF_NO_THREAD or acquire spinlock_t, as
CONFIG_PROVE_RAW_LOCK_NESTING warns:
=============================
[ BUG: Invalid wait context ]
6.18.0-rc1+git... #1
-----------------------------
some-user-space-process/1251 is trying to lock:
(&counter->events_list_lock){....}-{3:3}, at: counter_push_event [counter]
other info that might help us debug this:
context-{2:2}
no locks held by some-user-space-process/....
stack backtrace:
CPU: 0 UID: 0 PID: 1251 Comm: some-user-space-process 6.18.0-rc1+git... #1 PREEMPT
Call trace:
 show_stack (C)
 dump_stack_lvl
 dump_stack
 __lock_acquire
 lock_acquire
 _raw_spin_lock_irqsave
 counter_push_event [counter]
 interrupt_cnt_isr [interrupt_cnt]
 __handle_irq_event_percpu
 handle_irq_event
 handle_simple_irq
 handle_irq_desc
 generic_handle_domain_irq
 gpio_irq_handler
 handle_irq_desc
 generic_handle_domain_irq
 gic_handle_irq
 call_on_irq_stack
 do_interrupt_handler
 el0_interrupt
 __el0_irq_handler_common
 el0t_64_irq_handler
 el0t_64_irq

... and Sebastian correctly points out. Remove IRQF_NO_THREAD as an
alternative to switching to raw_spinlock_t, because the latter would limit
all potential nested locks to raw_spinlock_t only.

Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20251117151314.xwLAZrWY@linutronix.de/
Fixes: a55ebd47f21f ("counter: add IRQ or GPIO based counter")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20251118083603.778626-1-alexander.sverdlin@siemens.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/counter/interrupt-cnt.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/counter/interrupt-cnt.c
+++ b/drivers/counter/interrupt-cnt.c
@@ -229,8 +229,7 @@ static int interrupt_cnt_probe(struct pl
 
 	irq_set_status_flags(priv->irq, IRQ_NOAUTOEN);
 	ret = devm_request_irq(dev, priv->irq, interrupt_cnt_isr,
-			       IRQF_TRIGGER_RISING | IRQF_NO_THREAD,
-			       dev_name(dev), counter);
+			       IRQF_TRIGGER_RISING, dev_name(dev), counter);
 	if (ret)
 		return ret;
 

[PATCH 6.1 07/72] drm/pl111: Fix error handling in pl111_amba_probe

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miaoqian Lin <linmq006@gmail.com>

commit 0ddd3bb4b14c9102c0267b3fd916c81fe5ab89c1 upstream.

Jump to the existing dev_put label when devm_request_irq() fails
so drm_dev_put() and of_reserved_mem_device_release() run
instead of returning early and leaking resources.

Found via static analysis and code review.

Fixes: bed41005e617 ("drm/pl111: Initial drm/kms driver for pl111")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251211123345.2392065-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/pl111/pl111_drv.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/pl111/pl111_drv.c
+++ b/drivers/gpu/drm/pl111/pl111_drv.c
@@ -297,7 +297,7 @@ static int pl111_amba_probe(struct amba_
 			       variant->name, priv);
 	if (ret != 0) {
 		dev_err(dev, "%s failed irq %d\n", __func__, ret);
-		return ret;
+		goto dev_put;
 	}
 
 	ret = pl111_modeset_init(drm);

[PATCH 6.1 08/72] gpio: rockchip: mark the GPIO controller as sleeping

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

commit 20cf2aed89ac6d78a0122e31c875228e15247194 upstream.

The GPIO controller is configured as non-sleeping but it uses generic
pinctrl helpers which use a mutex for synchronization.

This can cause the following lockdep splat with shared GPIOs enabled on
boards which have multiple devices using the same GPIO:

BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:591
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 12, name:
kworker/u16:0
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
6 locks held by kworker/u16:0/12:
  #0: ffff0001f0018d48 ((wq_completion)events_unbound#2){+.+.}-{0:0},
at: process_one_work+0x18c/0x604
  #1: ffff8000842dbdf0 (deferred_probe_work){+.+.}-{0:0}, at:
process_one_work+0x1b4/0x604
  #2: ffff0001f18498f8 (&dev->mutex){....}-{4:4}, at:
__device_attach+0x38/0x1b0
  #3: ffff0001f75f1e90 (&gdev->srcu){.+.?}-{0:0}, at:
gpiod_direction_output_raw_commit+0x0/0x360
  #4: ffff0001f46e3db8 (&shared_desc->spinlock){....}-{3:3}, at:
gpio_shared_proxy_direction_output+0xd0/0x144 [gpio_shared_proxy]
  #5: ffff0001f180ee90 (&gdev->srcu){.+.?}-{0:0}, at:
gpiod_direction_output_raw_commit+0x0/0x360
irq event stamp: 81450
hardirqs last  enabled at (81449): [<ffff8000813acba4>]
_raw_spin_unlock_irqrestore+0x74/0x78
hardirqs last disabled at (81450): [<ffff8000813abfb8>]
_raw_spin_lock_irqsave+0x84/0x88
softirqs last  enabled at (79616): [<ffff8000811455fc>]
__alloc_skb+0x17c/0x1e8
softirqs last disabled at (79614): [<ffff8000811455fc>]
__alloc_skb+0x17c/0x1e8
CPU: 2 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted
6.19.0-rc4-next-20260105+ #11975 PREEMPT
Hardware name: Hardkernel ODROID-M1 (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
  show_stack+0x18/0x24 (C)
  dump_stack_lvl+0x90/0xd0
  dump_stack+0x18/0x24
  __might_resched+0x144/0x248
  __might_sleep+0x48/0x98
  __mutex_lock+0x5c/0x894
  mutex_lock_nested+0x24/0x30
  pinctrl_get_device_gpio_range+0x44/0x128
  pinctrl_gpio_direction+0x3c/0xe0
  pinctrl_gpio_direction_output+0x14/0x20
  rockchip_gpio_direction_output+0xb8/0x19c
  gpiochip_direction_output+0x38/0x94
  gpiod_direction_output_raw_commit+0x1d8/0x360
  gpiod_direction_output_nonotify+0x7c/0x230
  gpiod_direction_output+0x34/0xf8
  gpio_shared_proxy_direction_output+0xec/0x144 [gpio_shared_proxy]
  gpiochip_direction_output+0x38/0x94
  gpiod_direction_output_raw_commit+0x1d8/0x360
  gpiod_direction_output_nonotify+0x7c/0x230
  gpiod_configure_flags+0xbc/0x480
  gpiod_find_and_request+0x1a0/0x574
  gpiod_get_index+0x58/0x84
  devm_gpiod_get_index+0x20/0xb4
  devm_gpiod_get_optional+0x18/0x30
  rockchip_pcie_probe+0x98/0x380
  platform_probe+0x5c/0xac
  really_probe+0xbc/0x298

Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio")
Cc: stable@vger.kernel.org
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/d035fc29-3b03-4cd6-b8ec-001f93540bc6@samsung.com/
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20260106090011.21603-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpio/gpio-rockchip.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpio/gpio-rockchip.c
+++ b/drivers/gpio/gpio-rockchip.c
@@ -584,6 +584,7 @@ static int rockchip_gpiolib_register(str
 	gc->ngpio = bank->nr_pins;
 	gc->label = bank->name;
 	gc->parent = bank->dev;
+	gc->can_sleep = true;
 
 	ret = gpiochip_add_data(gc, bank);
 	if (ret) {

[PATCH 6.1 09/72] wifi: avoid kernel-infoleak from struct iw_point

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

commit 21cbf883d073abbfe09e3924466aa5e0449e7261 upstream.

struct iw_point has a 32bit hole on 64bit arches.

struct iw_point {
  void __user   *pointer;       /* Pointer to the data  (in user space) */
  __u16         length;         /* number of fields or size in bytes */
  __u16         flags;          /* Optional params */
};

Make sure to zero the structure to avoid disclosing 32bits of kernel data
to user space.

Fixes: 87de87d5e47f ("wext: Dispatch and handle compat ioctls entirely in net/wireless/wext.c")
Reported-by: syzbot+bfc7323743ca6dbcc3d3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/695f83f3.050a0220.1c677c.0392.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260108101927.857582-1-edumazet@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/wireless/wext-core.c |    4 ++++
 net/wireless/wext-priv.c |    4 ++++
 2 files changed, 8 insertions(+)

--- a/net/wireless/wext-core.c
+++ b/net/wireless/wext-core.c
@@ -1084,6 +1084,10 @@ static int compat_standard_call(struct n
 		return ioctl_standard_call(dev, iwr, cmd, info, handler);
 
 	iwp_compat = (struct compat_iw_point *) &iwr->u.data;
+
+	/* struct iw_point has a 32bit hole on 64bit arches. */
+	memset(&iwp, 0, sizeof(iwp));
+
 	iwp.pointer = compat_ptr(iwp_compat->pointer);
 	iwp.length = iwp_compat->length;
 	iwp.flags = iwp_compat->flags;
--- a/net/wireless/wext-priv.c
+++ b/net/wireless/wext-priv.c
@@ -228,6 +228,10 @@ int compat_private_call(struct net_devic
 		struct iw_point iwp;
 
 		iwp_compat = (struct compat_iw_point *) &iwr->u.data;
+
+		/* struct iw_point has a 32bit hole on 64bit arches. */
+		memset(&iwp, 0, sizeof(iwp));
+
 		iwp.pointer = compat_ptr(iwp_compat->pointer);
 		iwp.length = iwp_compat->length;
 		iwp.flags = iwp_compat->flags;

[PATCH 6.1 10/72] libceph: prevent potential out-of-bounds reads in handle_auth_done()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: ziming zhang <ezrakiez@gmail.com>

commit 818156caffbf55cb4d368f9c3cac64e458fb49c9 upstream.

Perform an explicit bounds check on payload_len to avoid a possible
out-of-bounds access in the callout.

[ idryomov: changelog ]

Cc: stable@vger.kernel.org
Signed-off-by: ziming zhang <ezrakiez@gmail.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ceph/messenger_v2.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/ceph/messenger_v2.c
+++ b/net/ceph/messenger_v2.c
@@ -2187,7 +2187,9 @@ static int process_auth_done(struct ceph
 
 	ceph_decode_64_safe(&p, end, global_id, bad);
 	ceph_decode_32_safe(&p, end, con->v2.con_mode, bad);
+
 	ceph_decode_32_safe(&p, end, payload_len, bad);
+	ceph_decode_need(&p, end, payload_len, bad);
 
 	dout("%s con %p global_id %llu con_mode %d payload_len %d\n",
 	     __func__, con, global_id, con->v2.con_mode, payload_len);

[PATCH 6.1 11/72] libceph: replace overzealous BUG_ON in osdmap_apply_incremental()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ilya Dryomov <idryomov@gmail.com>

commit e00c3f71b5cf75681dbd74ee3f982a99cb690c2b upstream.

If the osdmap is (maliciously) corrupted such that the incremental
osdmap epoch is different from what is expected, there is no need to
BUG.  Instead, just declare the incremental osdmap to be invalid.

Cc: stable@vger.kernel.org
Reported-by: ziming zhang <ezrakiez@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ceph/osdmap.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/ceph/osdmap.c
+++ b/net/ceph/osdmap.c
@@ -1979,11 +1979,13 @@ struct ceph_osdmap *osdmap_apply_increme
 			 sizeof(u64) + sizeof(u32), e_inval);
 	ceph_decode_copy(p, &fsid, sizeof(fsid));
 	epoch = ceph_decode_32(p);
-	BUG_ON(epoch != map->epoch+1);
 	ceph_decode_copy(p, &modified, sizeof(modified));
 	new_pool_max = ceph_decode_64(p);
 	new_flags = ceph_decode_32(p);
 
+	if (epoch != map->epoch + 1)
+		goto e_inval;
+
 	/* full map? */
 	ceph_decode_32_safe(p, end, len, e_inval);
 	if (len > 0) {

[PATCH 6.1 12/72] libceph: make free_choose_arg_map() resilient to partial allocation

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tuo Li <islituo@gmail.com>

commit e3fe30e57649c551757a02e1cad073c47e1e075e upstream.

free_choose_arg_map() may dereference a NULL pointer if its caller fails
after a partial allocation.

For example, in decode_choose_args(), if allocation of arg_map->args
fails, execution jumps to the fail label and free_choose_arg_map() is
called. Since arg_map->size is updated to a non-zero value before memory
allocation, free_choose_arg_map() will iterate over arg_map->args and
dereference a NULL pointer.

To prevent this potential NULL pointer dereference and make
free_choose_arg_map() more resilient, add checks for pointers before
iterating.

Cc: stable@vger.kernel.org
Co-authored-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Tuo Li <islituo@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ceph/osdmap.c |   20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

--- a/net/ceph/osdmap.c
+++ b/net/ceph/osdmap.c
@@ -241,22 +241,26 @@ static struct crush_choose_arg_map *allo
 
 static void free_choose_arg_map(struct crush_choose_arg_map *arg_map)
 {
-	if (arg_map) {
-		int i, j;
+	int i, j;
 
-		WARN_ON(!RB_EMPTY_NODE(&arg_map->node));
+	if (!arg_map)
+		return;
 
+	WARN_ON(!RB_EMPTY_NODE(&arg_map->node));
+
+	if (arg_map->args) {
 		for (i = 0; i < arg_map->size; i++) {
 			struct crush_choose_arg *arg = &arg_map->args[i];
-
-			for (j = 0; j < arg->weight_set_size; j++)
-				kfree(arg->weight_set[j].weights);
-			kfree(arg->weight_set);
+			if (arg->weight_set) {
+				for (j = 0; j < arg->weight_set_size; j++)
+					kfree(arg->weight_set[j].weights);
+				kfree(arg->weight_set);
+			}
 			kfree(arg->ids);
 		}
 		kfree(arg_map->args);
-		kfree(arg_map);
 	}
+	kfree(arg_map);
 }
 
 DEFINE_RB_FUNCS(choose_arg_map, struct crush_choose_arg_map, choose_args_index,

[PATCH 6.1 13/72] libceph: return the handler error from mon_handle_auth_done()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ilya Dryomov <idryomov@gmail.com>

commit e84b48d31b5008932c0a0902982809fbaa1d3b70 upstream.

Currently any error from ceph_auth_handle_reply_done() is propagated
via finish_auth() but isn't returned from mon_handle_auth_done().  This
results in higher layers learning that (despite the monitor considering
us to be successfully authenticated) something went wrong in the
authentication phase and reacting accordingly, but msgr2 still trying
to proceed with establishing the session in the background.  In the
case of secure mode this can trigger a WARN in setup_crypto() and later
lead to a NULL pointer dereference inside of prepare_auth_signature().

Cc: stable@vger.kernel.org
Fixes: cd1a677cad99 ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ceph/mon_client.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ceph/mon_client.c
+++ b/net/ceph/mon_client.c
@@ -1417,7 +1417,7 @@ static int mon_handle_auth_done(struct c
 	if (!ret)
 		finish_hunting(monc);
 	mutex_unlock(&monc->mutex);
-	return 0;
+	return ret;
 }
 
 static int mon_handle_auth_bad_method(struct ceph_connection *con,

[PATCH 6.1 14/72] libceph: make calc_target() set t->paused, not just clear it

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ilya Dryomov <idryomov@gmail.com>

commit c0fe2994f9a9d0a2ec9e42441ea5ba74b6a16176 upstream.

Currently calc_target() clears t->paused if the request shouldn't be
paused anymore, but doesn't ever set t->paused even though it's able to
determine when the request should be paused.  Setting t->paused is left
to __submit_request() which is fine for regular requests but doesn't
work for linger requests -- since __submit_request() doesn't operate
on linger requests, there is nowhere for lreq->t.paused to be set.
One consequence of this is that watches don't get reestablished on
paused -> unpaused transitions in cases where requests have been paused
long enough for the (paused) unwatch request to time out and for the
subsequent (re)watch request to enter the paused state.  On top of the
watch not getting reestablished, rbd_reregister_watch() gets stuck with
rbd_dev->watch_mutex held:

  rbd_register_watch
    __rbd_register_watch
      ceph_osdc_watch
        linger_reg_commit_wait

It's waiting for lreq->reg_commit_wait to be completed, but for that to
happen the respective request needs to end up on need_resend_linger list
and be kicked when requests are unpaused.  There is no chance for that
if the request in question is never marked paused in the first place.

The fact that rbd_dev->watch_mutex remains taken out forever then
prevents the image from getting unmapped -- "rbd unmap" would inevitably
hang in D state on an attempt to grab the mutex.

Cc: stable@vger.kernel.org
Reported-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ceph/osd_client.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -1529,6 +1529,7 @@ static enum calc_target_result calc_targ
 	struct ceph_pg_pool_info *pi;
 	struct ceph_pg pgid, last_pgid;
 	struct ceph_osds up, acting;
+	bool should_be_paused;
 	bool is_read = t->flags & CEPH_OSD_FLAG_READ;
 	bool is_write = t->flags & CEPH_OSD_FLAG_WRITE;
 	bool force_resend = false;
@@ -1597,10 +1598,16 @@ static enum calc_target_result calc_targ
 				 &last_pgid))
 		force_resend = true;
 
-	if (t->paused && !target_should_be_paused(osdc, t, pi)) {
-		t->paused = false;
+	should_be_paused = target_should_be_paused(osdc, t, pi);
+	if (t->paused && !should_be_paused) {
 		unpaused = true;
 	}
+	if (t->paused != should_be_paused) {
+		dout("%s t %p paused %d -> %d\n", __func__, t, t->paused,
+		     should_be_paused);
+		t->paused = should_be_paused;
+	}
+
 	legacy_change = ceph_pg_compare(&t->pgid, &pgid) ||
 			ceph_osds_changed(&t->acting, &acting,
 					  t->used_replica || any_change);

[PATCH 6.1 15/72] ext4: introduce ITAIL helper

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ye Bin <yebin10@huawei.com>

[ Upstream commit 69f3a3039b0d0003de008659cafd5a1eaaa0a7a4 ]

Introduce ITAIL helper to get the bound of xattr in inode.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250208063141.1539283-2-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: David Nyström <david.nystrom@est.tech>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/xattr.c |   10 +++++-----
 fs/ext4/xattr.h |    3 +++
 2 files changed, 8 insertions(+), 5 deletions(-)

--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -599,7 +599,7 @@ ext4_xattr_ibody_get(struct inode *inode
 		return error;
 	raw_inode = ext4_raw_inode(&iloc);
 	header = IHDR(inode, raw_inode);
-	end = (void *)raw_inode + EXT4_SB(inode->i_sb)->s_inode_size;
+	end = ITAIL(inode, raw_inode);
 	error = xattr_check_inode(inode, header, end);
 	if (error)
 		goto cleanup;
@@ -744,7 +744,7 @@ ext4_xattr_ibody_list(struct dentry *den
 		return error;
 	raw_inode = ext4_raw_inode(&iloc);
 	header = IHDR(inode, raw_inode);
-	end = (void *)raw_inode + EXT4_SB(inode->i_sb)->s_inode_size;
+	end = ITAIL(inode, raw_inode);
 	error = xattr_check_inode(inode, header, end);
 	if (error)
 		goto cleanup;
@@ -830,7 +830,7 @@ int ext4_get_inode_usage(struct inode *i
 			goto out;
 		raw_inode = ext4_raw_inode(&iloc);
 		header = IHDR(inode, raw_inode);
-		end = (void *)raw_inode + EXT4_SB(inode->i_sb)->s_inode_size;
+		end = ITAIL(inode, raw_inode);
 		ret = xattr_check_inode(inode, header, end);
 		if (ret)
 			goto out;
@@ -2195,7 +2195,7 @@ int ext4_xattr_ibody_find(struct inode *
 	header = IHDR(inode, raw_inode);
 	is->s.base = is->s.first = IFIRST(header);
 	is->s.here = is->s.first;
-	is->s.end = (void *)raw_inode + EXT4_SB(inode->i_sb)->s_inode_size;
+	is->s.end = ITAIL(inode, raw_inode);
 	if (ext4_test_inode_state(inode, EXT4_STATE_XATTR)) {
 		error = xattr_check_inode(inode, header, is->s.end);
 		if (error)
@@ -2746,7 +2746,7 @@ retry:
 	 */
 
 	base = IFIRST(header);
-	end = (void *)raw_inode + EXT4_SB(inode->i_sb)->s_inode_size;
+	end = ITAIL(inode, raw_inode);
 	min_offs = end - base;
 	total_ino = sizeof(struct ext4_xattr_ibody_header) + sizeof(u32);
 
--- a/fs/ext4/xattr.h
+++ b/fs/ext4/xattr.h
@@ -68,6 +68,9 @@ struct ext4_xattr_entry {
 		((void *)raw_inode + \
 		EXT4_GOOD_OLD_INODE_SIZE + \
 		EXT4_I(inode)->i_extra_isize))
+#define ITAIL(inode, raw_inode) \
+	((void *)(raw_inode) + \
+	 EXT4_SB((inode)->i_sb)->s_inode_size)
 #define IFIRST(hdr) ((struct ext4_xattr_entry *)((hdr)+1))
 
 /*

[PATCH 6.1 16/72] ext4: fix out-of-bound read in ext4_xattr_inode_dec_ref_all()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ye Bin <yebin10@huawei.com>

[ Upstream commit 5701875f9609b000d91351eaa6bfd97fe2f157f4 ]

There's issue as follows:
BUG: KASAN: use-after-free in ext4_xattr_inode_dec_ref_all+0x6ff/0x790
Read of size 4 at addr ffff88807b003000 by task syz-executor.0/15172

CPU: 3 PID: 15172 Comm: syz-executor.0
Call Trace:
 __dump_stack lib/dump_stack.c:82 [inline]
 dump_stack+0xbe/0xfd lib/dump_stack.c:123
 print_address_description.constprop.0+0x1e/0x280 mm/kasan/report.c:400
 __kasan_report.cold+0x6c/0x84 mm/kasan/report.c:560
 kasan_report+0x3a/0x50 mm/kasan/report.c:585
 ext4_xattr_inode_dec_ref_all+0x6ff/0x790 fs/ext4/xattr.c:1137
 ext4_xattr_delete_inode+0x4c7/0xda0 fs/ext4/xattr.c:2896
 ext4_evict_inode+0xb3b/0x1670 fs/ext4/inode.c:323
 evict+0x39f/0x880 fs/inode.c:622
 iput_final fs/inode.c:1746 [inline]
 iput fs/inode.c:1772 [inline]
 iput+0x525/0x6c0 fs/inode.c:1758
 ext4_orphan_cleanup fs/ext4/super.c:3298 [inline]
 ext4_fill_super+0x8c57/0xba40 fs/ext4/super.c:5300
 mount_bdev+0x355/0x410 fs/super.c:1446
 legacy_get_tree+0xfe/0x220 fs/fs_context.c:611
 vfs_get_tree+0x8d/0x2f0 fs/super.c:1576
 do_new_mount fs/namespace.c:2983 [inline]
 path_mount+0x119a/0x1ad0 fs/namespace.c:3316
 do_mount+0xfc/0x110 fs/namespace.c:3329
 __do_sys_mount fs/namespace.c:3540 [inline]
 __se_sys_mount+0x219/0x2e0 fs/namespace.c:3514
 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x67/0xd1

Memory state around the buggy address:
 ffff88807b002f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff88807b002f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff88807b003000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                   ^
 ffff88807b003080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff88807b003100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

Above issue happens as ext4_xattr_delete_inode() isn't check xattr
is valid if xattr is in inode.
To solve above issue call xattr_check_inode() check if xattr if valid
in inode. In fact, we can directly verify in ext4_iget_extra_inode(),
so that there is no divergent verification.

Fixes: e50e5129f384 ("ext4: xattr-in-inode support")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250208063141.1539283-3-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: David Nyström <david.nystrom@est.tech>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/inode.c |    5 +++++
 fs/ext4/xattr.c |   26 +-------------------------
 fs/ext4/xattr.h |    7 +++++++
 3 files changed, 13 insertions(+), 25 deletions(-)

--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4752,6 +4752,11 @@ static inline int ext4_iget_extra_inode(
 	    *magic == cpu_to_le32(EXT4_XATTR_MAGIC)) {
 		int err;
 
+		err = xattr_check_inode(inode, IHDR(inode, raw_inode),
+					ITAIL(inode, raw_inode));
+		if (err)
+			return err;
+
 		ext4_set_inode_state(inode, EXT4_STATE_XATTR);
 		err = ext4_find_inline_data_nolock(inode);
 		if (!err && ext4_has_inline_data(inode))
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -263,7 +263,7 @@ errout:
 	__ext4_xattr_check_block((inode), (bh),  __func__, __LINE__)
 
 
-static int
+int
 __xattr_check_inode(struct inode *inode, struct ext4_xattr_ibody_header *header,
 			 void *end, const char *function, unsigned int line)
 {
@@ -280,9 +280,6 @@ errout:
 	return error;
 }
 
-#define xattr_check_inode(inode, header, end) \
-	__xattr_check_inode((inode), (header), (end), __func__, __LINE__)
-
 static int
 xattr_find_entry(struct inode *inode, struct ext4_xattr_entry **pentry,
 		 void *end, int name_index, const char *name, int sorted)
@@ -600,9 +597,6 @@ ext4_xattr_ibody_get(struct inode *inode
 	raw_inode = ext4_raw_inode(&iloc);
 	header = IHDR(inode, raw_inode);
 	end = ITAIL(inode, raw_inode);
-	error = xattr_check_inode(inode, header, end);
-	if (error)
-		goto cleanup;
 	entry = IFIRST(header);
 	error = xattr_find_entry(inode, &entry, end, name_index, name, 0);
 	if (error)
@@ -734,7 +728,6 @@ ext4_xattr_ibody_list(struct dentry *den
 	struct ext4_xattr_ibody_header *header;
 	struct ext4_inode *raw_inode;
 	struct ext4_iloc iloc;
-	void *end;
 	int error;
 
 	if (!ext4_test_inode_state(inode, EXT4_STATE_XATTR))
@@ -744,14 +737,9 @@ ext4_xattr_ibody_list(struct dentry *den
 		return error;
 	raw_inode = ext4_raw_inode(&iloc);
 	header = IHDR(inode, raw_inode);
-	end = ITAIL(inode, raw_inode);
-	error = xattr_check_inode(inode, header, end);
-	if (error)
-		goto cleanup;
 	error = ext4_xattr_list_entries(dentry, IFIRST(header),
 					buffer, buffer_size);
 
-cleanup:
 	brelse(iloc.bh);
 	return error;
 }
@@ -819,7 +807,6 @@ int ext4_get_inode_usage(struct inode *i
 	struct ext4_xattr_ibody_header *header;
 	struct ext4_xattr_entry *entry;
 	qsize_t ea_inode_refs = 0;
-	void *end;
 	int ret;
 
 	lockdep_assert_held_read(&EXT4_I(inode)->xattr_sem);
@@ -830,10 +817,6 @@ int ext4_get_inode_usage(struct inode *i
 			goto out;
 		raw_inode = ext4_raw_inode(&iloc);
 		header = IHDR(inode, raw_inode);
-		end = ITAIL(inode, raw_inode);
-		ret = xattr_check_inode(inode, header, end);
-		if (ret)
-			goto out;
 
 		for (entry = IFIRST(header); !IS_LAST_ENTRY(entry);
 		     entry = EXT4_XATTR_NEXT(entry))
@@ -2197,9 +2180,6 @@ int ext4_xattr_ibody_find(struct inode *
 	is->s.here = is->s.first;
 	is->s.end = ITAIL(inode, raw_inode);
 	if (ext4_test_inode_state(inode, EXT4_STATE_XATTR)) {
-		error = xattr_check_inode(inode, header, is->s.end);
-		if (error)
-			return error;
 		/* Find the named attribute. */
 		error = xattr_find_entry(inode, &is->s.here, is->s.end,
 					 i->name_index, i->name, 0);
@@ -2750,10 +2730,6 @@ retry:
 	min_offs = end - base;
 	total_ino = sizeof(struct ext4_xattr_ibody_header) + sizeof(u32);
 
-	error = xattr_check_inode(inode, header, end);
-	if (error)
-		goto cleanup;
-
 	ifree = ext4_xattr_free_space(base, &min_offs, base, &total_ino);
 	if (ifree >= isize_diff)
 		goto shift;
--- a/fs/ext4/xattr.h
+++ b/fs/ext4/xattr.h
@@ -210,6 +210,13 @@ extern int ext4_xattr_ibody_set(handle_t
 extern struct mb_cache *ext4_xattr_create_cache(void);
 extern void ext4_xattr_destroy_cache(struct mb_cache *);
 
+extern int
+__xattr_check_inode(struct inode *inode, struct ext4_xattr_ibody_header *header,
+		    void *end, const char *function, unsigned int line);
+
+#define xattr_check_inode(inode, header, end) \
+	__xattr_check_inode((inode), (header), (end), __func__, __LINE__)
+
 #ifdef CONFIG_EXT4_FS_SECURITY
 extern int ext4_init_security(handle_t *handle, struct inode *inode,
 			      struct inode *dir, const struct qstr *qstr);

[PATCH 6.1 17/72] net: Add locking to protect skb->dev access in ip_output

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sharath Chandra Vurukala <quic_sharathv@quicinc.com>

[ Upstream commit 1dbf1d590d10a6d1978e8184f8dfe20af22d680a]

In ip_output() skb->dev is updated from the skb_dst(skb)->dev
this can become invalid when the interface is unregistered and freed,

Introduced new skb_dst_dev_rcu() function to be used instead of
skb_dst_dev() within rcu_locks in ip_output.This will ensure that
all the skb's associated with the dev being deregistered will
be transnmitted out first, before freeing the dev.

Given that ip_output() is called within an rcu_read_lock()
critical section or from a bottom-half context, it is safe to introduce
an RCU read-side critical section within it.

Multiple panic call stacks were observed when UL traffic was run
in concurrency with device deregistration from different functions,
pasting one sample for reference.

[496733.627565][T13385] Call trace:
[496733.627570][T13385] bpf_prog_ce7c9180c3b128ea_cgroupskb_egres+0x24c/0x7f0
[496733.627581][T13385] __cgroup_bpf_run_filter_skb+0x128/0x498
[496733.627595][T13385] ip_finish_output+0xa4/0xf4
[496733.627605][T13385] ip_output+0x100/0x1a0
[496733.627613][T13385] ip_send_skb+0x68/0x100
[496733.627618][T13385] udp_send_skb+0x1c4/0x384
[496733.627625][T13385] udp_sendmsg+0x7b0/0x898
[496733.627631][T13385] inet_sendmsg+0x5c/0x7c
[496733.627639][T13385] __sys_sendto+0x174/0x1e4
[496733.627647][T13385] __arm64_sys_sendto+0x28/0x3c
[496733.627653][T13385] invoke_syscall+0x58/0x11c
[496733.627662][T13385] el0_svc_common+0x88/0xf4
[496733.627669][T13385] do_el0_svc+0x2c/0xb0
[496733.627676][T13385] el0_svc+0x2c/0xa4
[496733.627683][T13385] el0t_64_sync_handler+0x68/0xb4
[496733.627689][T13385] el0t_64_sync+0x1a4/0x1a8

Changes in v3:
- Replaced WARN_ON() with  WARN_ON_ONCE(), as suggested by Willem de Bruijn.
- Dropped legacy lines mistakenly pulled in from an outdated branch.

Changes in v2:
- Addressed review comments from Eric Dumazet
- Used READ_ONCE() to prevent potential load/store tearing
- Added skb_dst_dev_rcu() and used along with rcu_read_lock() in ip_output

Signed-off-by: Sharath Chandra Vurukala <quic_sharathv@quicinc.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250730105118.GA26100@hu-sharathv-hyd.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Keerthana: Backported the patch to v5.15-v6.1 ]
Signed-off-by: Keerthana K <keerthana.kalyanasundaram@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/dst.h    |   12 ++++++++++++
 net/ipv4/ip_output.c |   16 +++++++++++-----
 2 files changed, 23 insertions(+), 5 deletions(-)

--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -555,6 +555,18 @@ static inline void skb_dst_update_pmtu_n
 		dst->ops->update_pmtu(dst, NULL, skb, mtu, false);
 }
 
+static inline struct net_device *dst_dev_rcu(const struct dst_entry *dst)
+{
+	/* In the future, use rcu_dereference(dst->dev) */
+	WARN_ON_ONCE(!rcu_read_lock_held());
+	return READ_ONCE(dst->dev);
+}
+
+static inline struct net_device *skb_dst_dev_rcu(const struct sk_buff *skb)
+{
+	return dst_dev_rcu(skb_dst(skb));
+}
+
 struct dst_entry *dst_blackhole_check(struct dst_entry *dst, u32 cookie);
 void dst_blackhole_update_pmtu(struct dst_entry *dst, struct sock *sk,
 			       struct sk_buff *skb, u32 mtu, bool confirm_neigh);
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -420,17 +420,23 @@ int ip_mc_output(struct net *net, struct
 
 int ip_output(struct net *net, struct sock *sk, struct sk_buff *skb)
 {
-	struct net_device *dev = skb_dst(skb)->dev, *indev = skb->dev;
+	struct net_device *dev, *indev = skb->dev;
+	int ret_val;
+
+	rcu_read_lock();
+	dev = skb_dst_dev_rcu(skb);
 
 	IP_UPD_PO_STATS(net, IPSTATS_MIB_OUT, skb->len);
 
 	skb->dev = dev;
 	skb->protocol = htons(ETH_P_IP);
 
-	return NF_HOOK_COND(NFPROTO_IPV4, NF_INET_POST_ROUTING,
-			    net, sk, skb, indev, dev,
-			    ip_finish_output,
-			    !(IPCB(skb)->flags & IPSKB_REROUTED));
+	ret_val = NF_HOOK_COND(NFPROTO_IPV4, NF_INET_POST_ROUTING,
+				net, sk, skb, indev, dev,
+				ip_finish_output,
+				!(IPCB(skb)->flags & IPSKB_REROUTED));
+	rcu_read_unlock();
+	return ret_val;
 }
 EXPORT_SYMBOL(ip_output);
 

[PATCH 6.1 18/72] tls: Use __sk_dst_get() and dst_dev_rcu() in get_netdev_for_sock().

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kuniyuki Iwashima <kuniyu@google.com>

[ Upstream commit c65f27b9c3be2269918e1cbad6d8884741f835c5 ]

get_netdev_for_sock() is called during setsockopt(),
so not under RCU.

Using sk_dst_get(sk)->dev could trigger UAF.

Let's use __sk_dst_get() and dst_dev_rcu().

Note that the only ->ndo_sk_get_lower_dev() user is
bond_sk_get_lower_dev(), which uses RCU.

Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250916214758.650211-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Keerthana: Backport to v5.15-v6.1 ]
Signed-off-by: Keerthana K <keerthana.kalyanasundaram@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/tls/tls_device.c |   18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

--- a/net/tls/tls_device.c
+++ b/net/tls/tls_device.c
@@ -125,17 +125,19 @@ static void tls_device_queue_ctx_destruc
 /* We assume that the socket is already connected */
 static struct net_device *get_netdev_for_sock(struct sock *sk)
 {
-	struct dst_entry *dst = sk_dst_get(sk);
-	struct net_device *netdev = NULL;
+	struct net_device *dev, *lowest_dev = NULL;
+	struct dst_entry *dst;
 
-	if (likely(dst)) {
-		netdev = netdev_sk_get_lowest_dev(dst->dev, sk);
-		dev_hold(netdev);
+	rcu_read_lock();
+	dst = __sk_dst_get(sk);
+	dev = dst ? dst_dev_rcu(dst) : NULL;
+	if (likely(dev)) {
+		lowest_dev = netdev_sk_get_lowest_dev(dev, sk);
+		dev_hold(lowest_dev);
 	}
+	rcu_read_unlock();
 
-	dst_release(dst);
-
-	return netdev;
+	return lowest_dev;
 }
 
 static void destroy_record(struct tls_record_info *record)

[PATCH 6.1 19/72] csky: fix csky_cmpxchg_fixup not working

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yang Li <yang.li85200@gmail.com>

[ Upstream commit 809ef03d6d21d5fea016bbf6babeec462e37e68c ]

In the csky_cmpxchg_fixup function, it is incorrect to use the global
variable csky_cmpxchg_stw to determine the address where the exception
occurred.The global variable csky_cmpxchg_stw stores the opcode at the
time of the exception, while &csky_cmpxchg_stw shows the address where
the exception occurred.

Signed-off-by: Yang Li <yang.li85200@gmail.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/csky/mm/fault.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/csky/mm/fault.c b/arch/csky/mm/fault.c
index a885518ce1dd2..5226bc08c3360 100644
--- a/arch/csky/mm/fault.c
+++ b/arch/csky/mm/fault.c
@@ -45,8 +45,8 @@ static inline void csky_cmpxchg_fixup(struct pt_regs *regs)
 	if (trap_no(regs) != VEC_TLBMODIFIED)
 		return;
 
-	if (instruction_pointer(regs) == csky_cmpxchg_stw)
-		instruction_pointer_set(regs, csky_cmpxchg_ldw);
+	if (instruction_pointer(regs) == (unsigned long)&csky_cmpxchg_stw)
+		instruction_pointer_set(regs, (unsigned long)&csky_cmpxchg_ldw);
 	return;
 }
 #endif
-- 
2.51.0

[PATCH 6.1 20/72] ARM: 9461/1: Disable HIGHPTE on PREEMPT_RT kernels

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

[ Upstream commit fedadc4137234c3d00c4785eeed3e747fe9036ae ]

gup_pgd_range() is invoked with disabled interrupts and invokes
__kmap_local_page_prot() via pte_offset_map(), gup_p4d_range().
With HIGHPTE enabled, __kmap_local_page_prot() invokes kmap_high_get()
which uses a spinlock_t via lock_kmap_any(). This leads to an
sleeping-while-atomic error on PREEMPT_RT because spinlock_t becomes a
sleeping lock and must not be acquired in atomic context.

The loop in map_new_virtual() uses wait_queue_head_t for wake up which
also is using a spinlock_t.

Since HIGHPTE is rarely needed at all, turn it off for PREEMPT_RT
to allow the use of get_user_pages_fast().

[arnd: rework patch to turn off HIGHPTE instead of HAVE_PAST_GUP]

Co-developed-by: Arnd Bergmann <arnd@arndb.de>

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6d5afe2e6ba33..f0352e5675dd0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1318,7 +1318,7 @@ config HIGHMEM
 
 config HIGHPTE
 	bool "Allocate 2nd-level pagetables from highmem" if EXPERT
-	depends on HIGHMEM
+	depends on HIGHMEM && !PREEMPT_RT
 	default y
 	help
 	  The VM uses one page of physical memory for each page table.
-- 
2.51.0

[PATCH 6.1 21/72] alpha: dont reference obsolete termio struct for TC* constants

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sam James <sam@gentoo.org>

[ Upstream commit 9aeed9041929812a10a6d693af050846942a1d16 ]

Similar in nature to ab107276607af90b13a5994997e19b7b9731e251. glibc-2.42
drops the legacy termio struct, but the ioctls.h header still defines some
TC* constants in terms of termio (via sizeof). Hardcode the values instead.

This fixes building Python for example, which falls over like:
  ./Modules/termios.c:1119:16: error: invalid application of 'sizeof' to incomplete type 'struct termio'

Link: https://bugs.gentoo.org/961769
Link: https://bugs.gentoo.org/962600
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/6ebd3451908785cad53b50ca6bc46cfe9d6bc03c.1764922497.git.sam@gentoo.org
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/alpha/include/uapi/asm/ioctls.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/alpha/include/uapi/asm/ioctls.h b/arch/alpha/include/uapi/asm/ioctls.h
index 971311605288f..a09d04b49cc65 100644
--- a/arch/alpha/include/uapi/asm/ioctls.h
+++ b/arch/alpha/include/uapi/asm/ioctls.h
@@ -23,10 +23,10 @@
 #define TCSETSW		_IOW('t', 21, struct termios)
 #define TCSETSF		_IOW('t', 22, struct termios)
 
-#define TCGETA		_IOR('t', 23, struct termio)
-#define TCSETA		_IOW('t', 24, struct termio)
-#define TCSETAW		_IOW('t', 25, struct termio)
-#define TCSETAF		_IOW('t', 28, struct termio)
+#define TCGETA          0x40127417
+#define TCSETA          0x80127418
+#define TCSETAW         0x80127419
+#define TCSETAF         0x8012741c
 
 #define TCSBRK		_IO('t', 29)
 #define TCXONC		_IO('t', 30)
-- 
2.51.0

[PATCH 6.1 22/72] NFSv4: ensure the open stateid seqid doesnt go backwards

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Scott Mayhew <smayhew@redhat.com>

[ Upstream commit 2e47c3cc64b44b0b06cd68c2801db92ff143f2b2 ]

We have observed an NFSv4 client receiving a LOCK reply with a status of
NFS4ERR_OLD_STATEID and subsequently retrying the LOCK request with an
earlier seqid value in the stateid.  As this was for a new lockowner,
that would imply that nfs_set_open_stateid_locked() had updated the open
stateid seqid with an earlier value.

Looking at nfs_set_open_stateid_locked(), if the incoming seqid is out
of sequence, the task will sleep on the state->waitq for up to 5
seconds.  If the task waits for the full 5 seconds, then after finishing
the wait it'll update the open stateid seqid with whatever value the
incoming seqid has.  If there are multiple waiters in this scenario,
then the last one to perform said update may not be the one with the
highest seqid.

Add a check to ensure that the seqid can only be incremented, and add a
tracepoint to indicate when old seqids are skipped.

Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@hammerspace.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4proc.c  | 13 +++++++++++--
 fs/nfs/nfs4trace.h |  1 +
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index d4ae2ce56af4a..8258bce82e5bc 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -1700,8 +1700,17 @@ static void nfs_set_open_stateid_locked(struct nfs4_state *state,
 		if (nfs_stateid_is_sequential(state, stateid))
 			break;
 
-		if (status)
-			break;
+		if (status) {
+			if (nfs4_stateid_match_other(stateid, &state->open_stateid) &&
+			    !nfs4_stateid_is_newer(stateid, &state->open_stateid)) {
+				trace_nfs4_open_stateid_update_skip(state->inode,
+								    stateid, status);
+				return;
+			} else {
+				break;
+			}
+		}
+
 		/* Rely on seqids for serialisation with NFSv4.0 */
 		if (!nfs4_has_session(NFS_SERVER(state->inode)->nfs_client))
 			break;
diff --git a/fs/nfs/nfs4trace.h b/fs/nfs/nfs4trace.h
index c8a57cfde64b4..0fc1b4a6eab90 100644
--- a/fs/nfs/nfs4trace.h
+++ b/fs/nfs/nfs4trace.h
@@ -1248,6 +1248,7 @@ DEFINE_NFS4_INODE_STATEID_EVENT(nfs4_setattr);
 DEFINE_NFS4_INODE_STATEID_EVENT(nfs4_delegreturn);
 DEFINE_NFS4_INODE_STATEID_EVENT(nfs4_open_stateid_update);
 DEFINE_NFS4_INODE_STATEID_EVENT(nfs4_open_stateid_update_wait);
+DEFINE_NFS4_INODE_STATEID_EVENT(nfs4_open_stateid_update_skip);
 DEFINE_NFS4_INODE_STATEID_EVENT(nfs4_close_stateid_update_wait);
 
 DECLARE_EVENT_CLASS(nfs4_getattr_event,
-- 
2.51.0

[PATCH 6.1 23/72] NFS: Fix up the automount fs_context to use the correct cred

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit a2a8fc27dd668e7562b5326b5ed2f1604cb1e2e9 ]

When automounting, the fs_context should be fixed up to use the cred
from the parent filesystem, since the operation is just extending the
namespace. Authorisation to enter that namespace will already have been
provided by the preceding lookup.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/namespace.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c
index 663f1a3f7cc3e..5cbbe59e56234 100644
--- a/fs/nfs/namespace.c
+++ b/fs/nfs/namespace.c
@@ -170,6 +170,11 @@ struct vfsmount *nfs_d_automount(struct path *path)
 	if (!ctx->clone_data.fattr)
 		goto out_fc;
 
+	if (fc->cred != server->cred) {
+		put_cred(fc->cred);
+		fc->cred = get_cred(server->cred);
+	}
+
 	if (fc->net_ns != client->cl_net) {
 		put_net(fc->net_ns);
 		fc->net_ns = get_net(client->cl_net);
-- 
2.51.0

[PATCH 6.1 24/72] smb/client: fix NT_STATUS_UNABLE_TO_FREE_VM value

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: ChenXiaoSong <chenxiaosong@kylinos.cn>

[ Upstream commit 9f99caa8950a76f560a90074e3a4b93cfa8b3d84 ]

This was reported by the KUnit tests in the later patches.

See MS-ERREF 2.3.1 STATUS_UNABLE_TO_FREE_VM. Keep it consistent with the
value in the documentation.

Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/nterr.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/smb/client/nterr.h b/fs/smb/client/nterr.h
index edd4741cab0a1..7ce063a1dc3f6 100644
--- a/fs/smb/client/nterr.h
+++ b/fs/smb/client/nterr.h
@@ -70,7 +70,7 @@ extern const struct nt_err_code_struct nt_errs[];
 #define NT_STATUS_NO_MEMORY 0xC0000000 | 0x0017
 #define NT_STATUS_CONFLICTING_ADDRESSES 0xC0000000 | 0x0018
 #define NT_STATUS_NOT_MAPPED_VIEW 0xC0000000 | 0x0019
-#define NT_STATUS_UNABLE_TO_FREE_VM 0x80000000 | 0x001a
+#define NT_STATUS_UNABLE_TO_FREE_VM 0xC0000000 | 0x001a
 #define NT_STATUS_UNABLE_TO_DELETE_SECTION 0xC0000000 | 0x001b
 #define NT_STATUS_INVALID_SYSTEM_SERVICE 0xC0000000 | 0x001c
 #define NT_STATUS_ILLEGAL_INSTRUCTION 0xC0000000 | 0x001d
-- 
2.51.0

[PATCH 6.1 25/72] smb/client: fix NT_STATUS_DEVICE_DOOR_OPEN value

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: ChenXiaoSong <chenxiaosong@kylinos.cn>

[ Upstream commit b2b50fca34da5ec231008edba798ddf92986bd7f ]

This was reported by the KUnit tests in the later patches.

See MS-ERREF 2.3.1 STATUS_DEVICE_DOOR_OPEN. Keep it consistent with the
value in the documentation.

Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/nterr.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/smb/client/nterr.h b/fs/smb/client/nterr.h
index 7ce063a1dc3f6..d46d42559eea2 100644
--- a/fs/smb/client/nterr.h
+++ b/fs/smb/client/nterr.h
@@ -44,7 +44,7 @@ extern const struct nt_err_code_struct nt_errs[];
 #define NT_STATUS_NO_DATA_DETECTED 0x8000001c
 #define NT_STATUS_STOPPED_ON_SYMLINK 0x8000002d
 #define NT_STATUS_DEVICE_REQUIRES_CLEANING 0x80000288
-#define NT_STATUS_DEVICE_DOOR_OPEN 0x80000288
+#define NT_STATUS_DEVICE_DOOR_OPEN 0x80000289
 #define NT_STATUS_UNSUCCESSFUL 0xC0000000 | 0x0001
 #define NT_STATUS_NOT_IMPLEMENTED 0xC0000000 | 0x0002
 #define NT_STATUS_INVALID_INFO_CLASS 0xC0000000 | 0x0003
-- 
2.51.0

[PATCH 6.1 26/72] smb/client: fix NT_STATUS_NO_DATA_DETECTED value

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: ChenXiaoSong <chenxiaosong@kylinos.cn>

[ Upstream commit a1237c203f1757480dc2f3b930608ee00072d3cc ]

This was reported by the KUnit tests in the later patches.

See MS-ERREF 2.3.1 STATUS_NO_DATA_DETECTED. Keep it consistent with the
value in the documentation.

Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/nterr.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/smb/client/nterr.h b/fs/smb/client/nterr.h
index d46d42559eea2..e3a341316a711 100644
--- a/fs/smb/client/nterr.h
+++ b/fs/smb/client/nterr.h
@@ -41,7 +41,7 @@ extern const struct nt_err_code_struct nt_errs[];
 #define NT_STATUS_MEDIA_CHANGED    0x8000001c
 #define NT_STATUS_END_OF_MEDIA     0x8000001e
 #define NT_STATUS_MEDIA_CHECK      0x80000020
-#define NT_STATUS_NO_DATA_DETECTED 0x8000001c
+#define NT_STATUS_NO_DATA_DETECTED 0x80000022
 #define NT_STATUS_STOPPED_ON_SYMLINK 0x8000002d
 #define NT_STATUS_DEVICE_REQUIRES_CLEANING 0x80000288
 #define NT_STATUS_DEVICE_DOOR_OPEN 0x80000289
-- 
2.51.0

[PATCH 6.1 27/72] scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wen Xiong <wenxiong@linux.ibm.com>

[ Upstream commit 6ac3484fb13b2fc7f31cfc7f56093e7d0ce646a5 ]

A dynamic remove/add storage adapter test hits EEH on PowerPC:

  EEH: [c00000000004f75c] __eeh_send_failure_event+0x7c/0x160
  EEH: [c000000000048444] eeh_dev_check_failure.part.0+0x254/0x650
  EEH: [c008000001650678] eeh_readl+0x60/0x90 [ipr]
  EEH: [c00800000166746c] ipr_cancel_op+0x2b8/0x524 [ipr]
  EEH: [c008000001656524] ipr_eh_abort+0x6c/0x130 [ipr]
  EEH: [c000000000ab0d20] scmd_eh_abort_handler+0x140/0x440
  EEH: [c00000000017e558] process_one_work+0x298/0x590
  EEH: [c00000000017eef8] worker_thread+0xa8/0x620
  EEH: [c00000000018be34] kthread+0x124/0x130
  EEH: [c00000000000cd64] ret_from_kernel_thread+0x5c/0x64

A PCIe bus trace reveals that a vector of MSI-X is cleared to 0 by
irqbalance daemon. If we disable irqbalance daemon, we won't see the
issue.

With debug enabled in ipr driver:

  [   44.103071] ipr: Entering __ipr_remove
  [   44.103083] ipr: Entering ipr_initiate_ioa_bringdown
  [   44.103091] ipr: Entering ipr_reset_shutdown_ioa
  [   44.103099] ipr: Leaving ipr_reset_shutdown_ioa
  [   44.103105] ipr: Leaving ipr_initiate_ioa_bringdown
  [   44.149918] ipr: Entering ipr_reset_ucode_download
  [   44.149935] ipr: Entering ipr_reset_alert
  [   44.150032] ipr: Entering ipr_reset_start_timer
  [   44.150038] ipr: Leaving ipr_reset_alert
  [   44.244343] scsi 1:2:3:0: alua: Detached
  [   44.254300] ipr: Entering ipr_reset_start_bist
  [   44.254320] ipr: Entering ipr_reset_start_timer
  [   44.254325] ipr: Leaving ipr_reset_start_bist
  [   44.364329] scsi 1:2:4:0: alua: Detached
  [   45.134341] scsi 1:2:5:0: alua: Detached
  [   45.860949] ipr: Entering ipr_reset_shutdown_ioa
  [   45.860962] ipr: Leaving ipr_reset_shutdown_ioa
  [   45.860966] ipr: Entering ipr_reset_alert
  [   45.861028] ipr: Entering ipr_reset_start_timer
  [   45.861035] ipr: Leaving ipr_reset_alert
  [   45.964302] ipr: Entering ipr_reset_start_bist
  [   45.964309] ipr: Entering ipr_reset_start_timer
  [   45.964313] ipr: Leaving ipr_reset_start_bist
  [   46.264301] ipr: Entering ipr_reset_bist_done
  [   46.264309] ipr: Leaving ipr_reset_bist_done

During adapter reset, ipr device driver blocks config space access but
can't block MMIO access for MSI-X entries.  There is very small window:
irqbalance daemon kicks in during adapter reset before ipr driver calls
pci_restore_state(pdev) to restore MSI-X table.

irqbalance daemon reads back all 0 for that MSI-X vector in
__pci_read_msi_msg().

irqbalance daemon:

  msi_domain_set_affinity()
  ->irq_chip_set_affinity_patent()
  ->xive_irq_set_affinity()
  ->irq_chip_compose_msi_msg()
    ->pseries_msi_compose_msg()
    ->__pci_read_msi_msg(): read all 0 since didn't call pci_restore_state
  ->irq_chip_write_msi_msg()
    -> pci_write_msg_msi(): write 0 to the msix vector entry

When ipr driver calls pci_restore_state(pdev) in
ipr_reset_restore_cfg_space(), the MSI-X vector entry has been cleared
by irqbalance daemon in pci_write_msg_msix().

  pci_restore_state()
  ->__pci_restore_msix_state()

Below is the MSI-X table for ipr adapter after irqbalance daemon kicked
in during adapter reset:

  Dump MSIx table: index=0 address_lo=c800 address_hi=10000000 msg_data=0
  Dump MSIx table: index=1 address_lo=c810 address_hi=10000000 msg_data=0
  Dump MSIx table: index=2 address_lo=c820 address_hi=10000000 msg_data=0
  Dump MSIx table: index=3 address_lo=c830 address_hi=10000000 msg_data=0
  Dump MSIx table: index=4 address_lo=c840 address_hi=10000000 msg_data=0
  Dump MSIx table: index=5 address_lo=c850 address_hi=10000000 msg_data=0
  Dump MSIx table: index=6 address_lo=c860 address_hi=10000000 msg_data=0
  Dump MSIx table: index=7 address_lo=c870 address_hi=10000000 msg_data=0
  Dump MSIx table: index=8 address_lo=0 address_hi=0 msg_data=0
  ---------> Hit EEH since msix vector of index=8 are 0
  Dump MSIx table: index=9 address_lo=c890 address_hi=10000000 msg_data=0
  Dump MSIx table: index=10 address_lo=c8a0 address_hi=10000000 msg_data=0
  Dump MSIx table: index=11 address_lo=c8b0 address_hi=10000000 msg_data=0
  Dump MSIx table: index=12 address_lo=c8c0 address_hi=10000000 msg_data=0
  Dump MSIx table: index=13 address_lo=c8d0 address_hi=10000000 msg_data=0
  Dump MSIx table: index=14 address_lo=c8e0 address_hi=10000000 msg_data=0
  Dump MSIx table: index=15 address_lo=c8f0 address_hi=10000000 msg_data=0

  [   46.264312] ipr: Entering ipr_reset_restore_cfg_space
  [   46.267439] ipr: Entering ipr_fail_all_ops
  [   46.267447] ipr: Leaving ipr_fail_all_ops
  [   46.267451] ipr: Leaving ipr_reset_restore_cfg_space
  [   46.267454] ipr: Entering ipr_ioa_bringdown_done
  [   46.267458] ipr: Leaving ipr_ioa_bringdown_done
  [   46.267467] ipr: Entering ipr_worker_thread
  [   46.267470] ipr: Leaving ipr_worker_thread

IRQ balancing is not required during adapter reset.

Enable "IRQ_NO_BALANCING" flag before starting adapter reset and disable
it after calling pci_restore_state(). The irqbalance daemon is disabled
for this short period of time (~2s).

Co-developed-by: Kyle Mahlkuch <Kyle.Mahlkuch@ibm.com>
Signed-off-by: Kyle Mahlkuch <Kyle.Mahlkuch@ibm.com>
Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com>
Link: https://patch.msgid.link/20251028142427.3969819-2-wenxiong@linux.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ipr.c | 28 +++++++++++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 8c062afb2918d..89b8990208506 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -62,8 +62,8 @@
 #include <linux/hdreg.h>
 #include <linux/reboot.h>
 #include <linux/stringify.h>
+#include <linux/irq.h>
 #include <asm/io.h>
-#include <asm/irq.h>
 #include <asm/processor.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_host.h>
@@ -8669,6 +8669,30 @@ static int ipr_dump_mailbox_wait(struct ipr_cmnd *ipr_cmd)
 	return IPR_RC_JOB_RETURN;
 }
 
+/**
+ * ipr_set_affinity_nobalance
+ * @ioa_cfg:	ipr_ioa_cfg struct for an ipr device
+ * @flag:	bool
+ *	true: ensable "IRQ_NO_BALANCING" bit for msix interrupt
+ *	false: disable "IRQ_NO_BALANCING" bit for msix interrupt
+ * Description: This function will be called to disable/enable
+ *	"IRQ_NO_BALANCING" to avoid irqbalance daemon
+ *	kicking in during adapter reset.
+ **/
+static void ipr_set_affinity_nobalance(struct ipr_ioa_cfg *ioa_cfg, bool flag)
+{
+	int irq, i;
+
+	for (i = 0; i < ioa_cfg->nvectors; i++) {
+		irq = pci_irq_vector(ioa_cfg->pdev, i);
+
+		if (flag)
+			irq_set_status_flags(irq, IRQ_NO_BALANCING);
+		else
+			irq_clear_status_flags(irq, IRQ_NO_BALANCING);
+	}
+}
+
 /**
  * ipr_reset_restore_cfg_space - Restore PCI config space.
  * @ipr_cmd:	ipr command struct
@@ -8693,6 +8717,7 @@ static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd)
 		return IPR_RC_JOB_CONTINUE;
 	}
 
+	ipr_set_affinity_nobalance(ioa_cfg, false);
 	ipr_fail_all_ops(ioa_cfg);
 
 	if (ioa_cfg->sis64) {
@@ -8772,6 +8797,7 @@ static int ipr_reset_start_bist(struct ipr_cmnd *ipr_cmd)
 		rc = pci_write_config_byte(ioa_cfg->pdev, PCI_BIST, PCI_BIST_START);
 
 	if (rc == PCIBIOS_SUCCESSFUL) {
+		ipr_set_affinity_nobalance(ioa_cfg, true);
 		ipr_cmd->job_step = ipr_reset_bist_done;
 		ipr_reset_start_timer(ipr_cmd, IPR_WAIT_FOR_BIST_TIMEOUT);
 		rc = IPR_RC_JOB_RETURN;
-- 
2.51.0

[PATCH 6.1 28/72] scsi: ufs: core: Fix EH failure after W-LUN resume error

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brian Kao <powenkao@google.com>

[ Upstream commit b4bb6daf4ac4d4560044ecdd81e93aa2f6acbb06 ]

When a W-LUN resume fails, its parent devices in the SCSI hierarchy,
including the scsi_target, may be runtime suspended. Subsequently, the
error handler in ufshcd_recover_pm_error() fails to set the W-LUN device
back to active because the parent target is not active.  This results in
the following errors:

  google-ufshcd 3c2d0000.ufs: ufshcd_err_handler started; HBA state eh_fatal; ...
  ufs_device_wlun 0:0:0:49488: START_STOP failed for power mode: 1, result 40000
  ufs_device_wlun 0:0:0:49488: ufshcd_wl_runtime_resume failed: -5
  ...
  ufs_device_wlun 0:0:0:49488: runtime PM trying to activate child device 0:0:0:49488 but parent (target0:0:0) is not active

Address this by:

 1. Ensuring the W-LUN's parent scsi_target is runtime resumed before
    attempting to set the W-LUN to active within
    ufshcd_recover_pm_error().

 2. Explicitly checking for power.runtime_error on the HBA and W-LUN
    devices before calling pm_runtime_set_active() to clear the error
    state.

 3. Adding pm_runtime_get_sync(hba->dev) in
    ufshcd_err_handling_prepare() to ensure the HBA itself is active
    during error recovery, even if a child device resume failed.

These changes ensure the device power states are managed correctly
during error recovery.

Signed-off-by: Brian Kao <powenkao@google.com>
Tested-by: Brian Kao <powenkao@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251112063214.1195761-1-powenkao@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ufs/core/ufshcd.c | 36 ++++++++++++++++++++++++++++--------
 1 file changed, 28 insertions(+), 8 deletions(-)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 2435ea7ec089b..d553169b4d9ad 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -6154,6 +6154,11 @@ static void ufshcd_clk_scaling_suspend(struct ufs_hba *hba, bool suspend)
 
 static void ufshcd_err_handling_prepare(struct ufs_hba *hba)
 {
+	/*
+	 * A WLUN resume failure could potentially lead to the HBA being
+	 * runtime suspended, so take an extra reference on hba->dev.
+	 */
+	pm_runtime_get_sync(hba->dev);
 	ufshcd_rpm_get_sync(hba);
 	if (pm_runtime_status_suspended(&hba->ufs_device_wlun->sdev_gendev) ||
 	    hba->is_sys_suspended) {
@@ -6194,6 +6199,7 @@ static void ufshcd_err_handling_unprepare(struct ufs_hba *hba)
 	if (ufshcd_is_clkscaling_supported(hba))
 		ufshcd_clk_scaling_suspend(hba, false);
 	ufshcd_rpm_put(hba);
+	pm_runtime_put(hba->dev);
 }
 
 static inline bool ufshcd_err_handling_should_stop(struct ufs_hba *hba)
@@ -6208,28 +6214,42 @@ static inline bool ufshcd_err_handling_should_stop(struct ufs_hba *hba)
 #ifdef CONFIG_PM
 static void ufshcd_recover_pm_error(struct ufs_hba *hba)
 {
+	struct scsi_target *starget = hba->ufs_device_wlun->sdev_target;
 	struct Scsi_Host *shost = hba->host;
 	struct scsi_device *sdev;
 	struct request_queue *q;
-	int ret;
+	bool resume_sdev_queues = false;
 
 	hba->is_sys_suspended = false;
+
 	/*
-	 * Set RPM status of wlun device to RPM_ACTIVE,
-	 * this also clears its runtime error.
+	 * Ensure the parent's error status is cleared before proceeding
+	 * to the child, as the parent must be active to activate the child.
 	 */
-	ret = pm_runtime_set_active(&hba->ufs_device_wlun->sdev_gendev);
+	if (hba->dev->power.runtime_error) {
+		/* hba->dev has no functional parent thus simplily set RPM_ACTIVE */
+		pm_runtime_set_active(hba->dev);
+		resume_sdev_queues = true;
+	}
+
+	if (hba->ufs_device_wlun->sdev_gendev.power.runtime_error) {
+		/*
+		 * starget, parent of wlun, might be suspended if wlun resume failed.
+		 * Make sure parent is resumed before set child (wlun) active.
+		 */
+		pm_runtime_get_sync(&starget->dev);
+		pm_runtime_set_active(&hba->ufs_device_wlun->sdev_gendev);
+		pm_runtime_put_sync(&starget->dev);
+		resume_sdev_queues = true;
+	}
 
-	/* hba device might have a runtime error otherwise */
-	if (ret)
-		ret = pm_runtime_set_active(hba->dev);
 	/*
 	 * If wlun device had runtime error, we also need to resume those
 	 * consumer scsi devices in case any of them has failed to be
 	 * resumed due to supplier runtime resume failure. This is to unblock
 	 * blk_queue_enter in case there are bios waiting inside it.
 	 */
-	if (!ret) {
+	if (resume_sdev_queues) {
 		shost_for_each_device(sdev, shost) {
 			q = sdev->request_queue;
 			if (q->dev && (q->rpm_status == RPM_SUSPENDED ||
-- 
2.51.0

[PATCH 6.1 29/72] scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xingui Yang <yangxingui@huawei.com>

[ Upstream commit 278712d20bc8ec29d1ad6ef9bdae9000ef2c220c ]

This reverts commit ab2068a6fb84751836a84c26ca72b3beb349619d.

When probing the exp-attached sata device, libsas/libata will issue a
hard reset in sas_probe_sata() -> ata_sas_async_probe(), then a
broadcast event will be received after the disk probe fails, and this
commit causes the probe will be re-executed on the disk, and a faulty
disk may get into an indefinite loop of probe.

Therefore, revert this commit, although it can fix some temporary issues
with disk probe failure.

Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251202065627.140361-1-yangxingui@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libsas/sas_internal.h | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
index 6ddccc67e808f..a94bd0790b055 100644
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -119,20 +119,6 @@ static inline void sas_fail_probe(struct domain_device *dev, const char *func, i
 		func, dev->parent ? "exp-attached" :
 		"direct-attached",
 		SAS_ADDR(dev->sas_addr), err);
-
-	/*
-	 * If the device probe failed, the expander phy attached address
-	 * needs to be reset so that the phy will not be treated as flutter
-	 * in the next revalidation
-	 */
-	if (dev->parent && !dev_is_expander(dev->dev_type)) {
-		struct sas_phy *phy = dev->phy;
-		struct domain_device *parent = dev->parent;
-		struct ex_phy *ex_phy = &parent->ex_dev.ex_phy[phy->number];
-
-		memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
-	}
-
 	sas_unregister_dev(dev->port, dev);
 }
 
-- 
2.51.0

[PATCH 6.1 30/72] arm64: dts: add off-on-delay-us for usdhc2 regulator

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Haibo Chen <haibo.chen@nxp.com>

[ Upstream commit ca643894a37a25713029b36cfe7d1bae515cac08 ]

For SD card, according to the spec requirement, for sd card power reset
operation, it need sd card supply voltage to be lower than 0.5v and keep
over 1ms, otherwise, next time power back the sd card supply voltage to
3.3v, sd card can't support SD3.0 mode again.

To match such requirement on imx8qm-mek board, add 4.8ms delay between
sd power off and power on.

Fixes: 307fd14d4b14 ("arm64: dts: imx: add imx8qm mek support")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 470e4e4aa8c78..059f8c0ab93d9 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -34,6 +34,7 @@ reg_usdhc2_vmmc: usdhc2-vmmc {
 		regulator-max-microvolt = <3000000>;
 		gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		off-on-delay-us = <4800>;
 	};
 };
 
-- 
2.51.0

[PATCH 6.1 31/72] ARM: dts: imx6q-ba16: fix RTC interrupt level

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Ray <ian.ray@gehealthcare.com>

[ Upstream commit e6a4eedd49ce27c16a80506c66a04707e0ee0116 ]

RTC interrupt level should be set to "LOW". This was revealed by the
introduction of commit:

  f181987ef477 ("rtc: m41t80: use IRQ flags obtained from fwnode")

which changed the way IRQ type is obtained.

Fixes: 56c27310c1b4 ("ARM: dts: imx: Add Advantech BA-16 Qseven module")
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6q-ba16.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index f266f1b7e0cfc..0c033e69ecc04 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -335,7 +335,7 @@ rtc@32 {
 		pinctrl-0 = <&pinctrl_rtc>;
 		reg = <0x32>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
-- 
2.51.0

[PATCH 6.1 32/72] arm64: dts: imx8mp: Fix LAN8740Ai PHY reference clock on DH electronics i.MX8M Plus DHCOM

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Vasut <marek.vasut@mailbox.org>

[ Upstream commit c63749a7ddc59ac6ec0b05abfa0a21af9f2c1d38 ]

Add missing 'clocks' property to LAN8740Ai PHY node, to allow the PHY driver
to manage LAN8740Ai CLKIN reference clock supply. This fixes sporadic link
bouncing caused by interruptions on the PHY reference clock, by letting the
PHY driver manage the reference clock and assure there are no interruptions.

This follows the matching PHY driver recommendation described in commit
bedd8d78aba3 ("net: phy: smsc: LAN8710/20: add phy refclk in support")

Fixes: 8d6712695bc8 ("arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index 2fd50b5890afa..0b81b85887f40 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -97,6 +97,7 @@ mdio {
 		ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */
 			compatible = "ethernet-phy-id0007.c110",
 				     "ethernet-phy-ieee802.3-c22";
+			clocks = <&clk IMX8MP_CLK_ENET_QOS>;
 			interrupt-parent = <&gpio3>;
 			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-0 = <&pinctrl_ethphy0>;
-- 
2.51.0

[PATCH 6.1 33/72] netfilter: nft_synproxy: avoid possible data-race on update operation

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fernando Fernandez Mancera <fmancera@suse.de>

[ Upstream commit 36a3200575642846a96436d503d46544533bb943 ]

During nft_synproxy eval we are reading nf_synproxy_info struct which
can be modified on update operation concurrently. As nf_synproxy_info
struct fits in 32 bits, use READ_ONCE/WRITE_ONCE annotations.

Fixes: ee394f96ad75 ("netfilter: nft_synproxy: add synproxy stateful object support")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_synproxy.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/netfilter/nft_synproxy.c b/net/netfilter/nft_synproxy.c
index a450f28a5ef60..0cc638553aef2 100644
--- a/net/netfilter/nft_synproxy.c
+++ b/net/netfilter/nft_synproxy.c
@@ -48,7 +48,7 @@ static void nft_synproxy_eval_v4(const struct nft_synproxy *priv,
 				 struct tcphdr *_tcph,
 				 struct synproxy_options *opts)
 {
-	struct nf_synproxy_info info = priv->info;
+	struct nf_synproxy_info info = READ_ONCE(priv->info);
 	struct net *net = nft_net(pkt);
 	struct synproxy_net *snet = synproxy_pernet(net);
 	struct sk_buff *skb = pkt->skb;
@@ -79,7 +79,7 @@ static void nft_synproxy_eval_v6(const struct nft_synproxy *priv,
 				 struct tcphdr *_tcph,
 				 struct synproxy_options *opts)
 {
-	struct nf_synproxy_info info = priv->info;
+	struct nf_synproxy_info info = READ_ONCE(priv->info);
 	struct net *net = nft_net(pkt);
 	struct synproxy_net *snet = synproxy_pernet(net);
 	struct sk_buff *skb = pkt->skb;
@@ -340,7 +340,7 @@ static void nft_synproxy_obj_update(struct nft_object *obj,
 	struct nft_synproxy *newpriv = nft_obj_data(newobj);
 	struct nft_synproxy *priv = nft_obj_data(obj);
 
-	priv->info = newpriv->info;
+	WRITE_ONCE(priv->info, newpriv->info);
 }
 
 static struct nft_object_type nft_synproxy_obj_type;
-- 
2.51.0

[PATCH 6.1 34/72] netfilter: nf_tables: fix memory leak in nf_tables_newrule()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zilin Guan <zilin@seu.edu.cn>

[ Upstream commit d077e8119ddbb4fca67540f1a52453631a47f221 ]

In nf_tables_newrule(), if nft_use_inc() fails, the function jumps to
the err_release_rule label without freeing the allocated flow, leading
to a memory leak.

Fix this by adding a new label err_destroy_flow and jumping to it when
nft_use_inc() fails. This ensures that the flow is properly released
in this error case.

Fixes: 1689f25924ada ("netfilter: nf_tables: report use refcount overflow")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index b278f493cc93c..d154e3e0c9803 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -3811,7 +3811,7 @@ static int nf_tables_newrule(struct sk_buff *skb, const struct nfnl_info *info,
 
 	if (!nft_use_inc(&chain->use)) {
 		err = -EMFILE;
-		goto err_release_rule;
+		goto err_destroy_flow;
 	}
 
 	if (info->nlh->nlmsg_flags & NLM_F_REPLACE) {
@@ -3861,6 +3861,7 @@ static int nf_tables_newrule(struct sk_buff *skb, const struct nfnl_info *info,
 
 err_destroy_flow_rule:
 	nft_use_dec_restore(&chain->use);
+err_destroy_flow:
 	if (flow)
 		nft_flow_rule_destroy(flow);
 err_release_rule:
-- 
2.51.0

[PATCH 6.1 35/72] netfilter: nf_conncount: update last_gc only when GC has been performed

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fernando Fernandez Mancera <fmancera@suse.de>

[ Upstream commit 7811ba452402d58628e68faedf38745b3d485e3c ]

Currently last_gc is being updated everytime a new connection is
tracked, that means that it is updated even if a GC wasn't performed.
With a sufficiently high packet rate, it is possible to always bypass
the GC, causing the list to grow infinitely.

Update the last_gc value only when a GC has been actually performed.

Fixes: d265929930e2 ("netfilter: nf_conncount: reduce unnecessary GC")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conncount.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nf_conncount.c b/net/netfilter/nf_conncount.c
index c00b8e522c5a7..a2c5a7ba0c6fc 100644
--- a/net/netfilter/nf_conncount.c
+++ b/net/netfilter/nf_conncount.c
@@ -229,6 +229,7 @@ static int __nf_conncount_add(struct net *net,
 
 		nf_ct_put(found_ct);
 	}
+	list->last_gc = (u32)jiffies;
 
 add_new_node:
 	if (WARN_ON_ONCE(list->count > INT_MAX)) {
@@ -248,7 +249,6 @@ static int __nf_conncount_add(struct net *net,
 	conn->jiffies32 = (u32)jiffies;
 	list_add_tail(&conn->node, &list->head);
 	list->count++;
-	list->last_gc = (u32)jiffies;
 
 out_put:
 	if (refcounted)
-- 
2.51.0

[PATCH 6.1 36/72] net: marvell: prestera: fix NULL dereference on devlink_alloc() failure

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alok Tiwari <alok.a.tiwari@oracle.com>

[ Upstream commit a428e0da1248c353557970848994f35fd3f005e2 ]

devlink_alloc() may return NULL on allocation failure, but
prestera_devlink_alloc() unconditionally calls devlink_priv() on
the returned pointer.

This leads to a NULL pointer dereference if devlink allocation fails.
Add a check for a NULL devlink pointer and return NULL early to avoid
the crash.

Fixes: 34dd1710f5a3 ("net: marvell: prestera: Add basic devlink support")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: Elad Nachman <enachman@marvell.com>
Link: https://patch.msgid.link/20251230052124.897012-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/prestera/prestera_devlink.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/marvell/prestera/prestera_devlink.c b/drivers/net/ethernet/marvell/prestera/prestera_devlink.c
index 06279cd6da674..8f0ae62d4a893 100644
--- a/drivers/net/ethernet/marvell/prestera/prestera_devlink.c
+++ b/drivers/net/ethernet/marvell/prestera/prestera_devlink.c
@@ -392,6 +392,8 @@ struct prestera_switch *prestera_devlink_alloc(struct prestera_device *dev)
 
 	dl = devlink_alloc(&prestera_dl_ops, sizeof(struct prestera_switch),
 			   dev->dev);
+	if (!dl)
+		return NULL;
 
 	return devlink_priv(dl);
 }
-- 
2.51.0

[PATCH 6.1 37/72] bridge: fix C-VLAN preservation in 802.1ad vlan_tunnel egress

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Knecht <knecht.alexandre@gmail.com>

[ Upstream commit 3128df6be147768fe536986fbb85db1d37806a9f ]

When using an 802.1ad bridge with vlan_tunnel, the C-VLAN tag is
incorrectly stripped from frames during egress processing.

br_handle_egress_vlan_tunnel() uses skb_vlan_pop() to remove the S-VLAN
from hwaccel before VXLAN encapsulation. However, skb_vlan_pop() also
moves any "next" VLAN from the payload into hwaccel:

    /* move next vlan tag to hw accel tag */
    __skb_vlan_pop(skb, &vlan_tci);
    __vlan_hwaccel_put_tag(skb, vlan_proto, vlan_tci);

For QinQ frames where the C-VLAN sits in the payload, this moves it to
hwaccel where it gets lost during VXLAN encapsulation.

Fix by calling __vlan_hwaccel_clear_tag() directly, which clears only
the hwaccel S-VLAN and leaves the payload untouched.

This path is only taken when vlan_tunnel is enabled and tunnel_info
is configured, so 802.1Q bridges are unaffected.

Tested with 802.1ad bridge + VXLAN vlan_tunnel, verified C-VLAN
preserved in VXLAN payload via tcpdump.

Fixes: 11538d039ac6 ("bridge: vlan dst_metadata hooks in ingress and egress paths")
Signed-off-by: Alexandre Knecht <knecht.alexandre@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20251228020057.2788865-1-knecht.alexandre@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bridge/br_vlan_tunnel.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/net/bridge/br_vlan_tunnel.c b/net/bridge/br_vlan_tunnel.c
index 6399a8a69d076..0f03572d89d09 100644
--- a/net/bridge/br_vlan_tunnel.c
+++ b/net/bridge/br_vlan_tunnel.c
@@ -187,7 +187,6 @@ int br_handle_egress_vlan_tunnel(struct sk_buff *skb,
 {
 	struct metadata_dst *tunnel_dst;
 	__be64 tunnel_id;
-	int err;
 
 	if (!vlan)
 		return 0;
@@ -197,9 +196,13 @@ int br_handle_egress_vlan_tunnel(struct sk_buff *skb,
 		return 0;
 
 	skb_dst_drop(skb);
-	err = skb_vlan_pop(skb);
-	if (err)
-		return err;
+	/* For 802.1ad (QinQ), skb_vlan_pop() incorrectly moves the C-VLAN
+	 * from payload to hwaccel after clearing S-VLAN. We only need to
+	 * clear the hwaccel S-VLAN; the C-VLAN must stay in payload for
+	 * correct VXLAN encapsulation. This is also correct for 802.1Q
+	 * where no C-VLAN exists in payload.
+	 */
+	__vlan_hwaccel_clear_tag(skb);
 
 	tunnel_dst = rcu_dereference(vlan->tinfo.tunnel_dst);
 	if (tunnel_dst && dst_hold_safe(&tunnel_dst->dst))
-- 
2.51.0

[PATCH 6.1 38/72] net: mscc: ocelot: Fix crash when adding interface under a lag

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jerry Wu <w.7erry@foxmail.com>

[ Upstream commit 34f3ff52cb9fa7dbf04f5c734fcc4cb6ed5d1a95 ]

Commit 15faa1f67ab4 ("lan966x: Fix crash when adding interface under a lag")
fixed a similar issue in the lan966x driver caused by a NULL pointer dereference.
The ocelot_set_aggr_pgids() function in the ocelot driver has similar logic
and is susceptible to the same crash.

This issue specifically affects the ocelot_vsc7514.c frontend, which leaves
unused ports as NULL pointers. The felix_vsc9959.c frontend is unaffected as
it uses the DSA framework which registers all ports.

Fix this by checking if the port pointer is valid before accessing it.

Fixes: 528d3f190c98 ("net: mscc: ocelot: drop the use of the "lags" array")
Signed-off-by: Jerry Wu <w.7erry@foxmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/tencent_75EF812B305E26B0869C673DD1160866C90A@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mscc/ocelot.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 203cb4978544a..01417c2a61e23 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -2202,14 +2202,16 @@ static void ocelot_set_aggr_pgids(struct ocelot *ocelot)
 
 	/* Now, set PGIDs for each active LAG */
 	for (lag = 0; lag < ocelot->num_phys_ports; lag++) {
-		struct net_device *bond = ocelot->ports[lag]->bond;
+		struct ocelot_port *ocelot_port = ocelot->ports[lag];
 		int num_active_ports = 0;
+		struct net_device *bond;
 		unsigned long bond_mask;
 		u8 aggr_idx[16];
 
-		if (!bond || (visited & BIT(lag)))
+		if (!ocelot_port || !ocelot_port->bond || (visited & BIT(lag)))
 			continue;
 
+		bond = ocelot_port->bond;
 		bond_mask = ocelot_get_bond_mask(ocelot, bond);
 
 		for_each_set_bit(port, &bond_mask, ocelot->num_phys_ports) {
-- 
2.51.0

[PATCH 6.1 39/72] inet: ping: Fix icmp out counting

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: yuan.gao <yuan.gao@ucloud.cn>

[ Upstream commit 4c0856c225b39b1def6c9a6bc56faca79550da13 ]

When the ping program uses an IPPROTO_ICMP socket to send ICMP_ECHO
messages, ICMP_MIB_OUTMSGS is counted twice.

    ping_v4_sendmsg
      ping_v4_push_pending_frames
        ip_push_pending_frames
          ip_finish_skb
            __ip_make_skb
              icmp_out_count(net, icmp_type); // first count
      icmp_out_count(sock_net(sk), user_icmph.type); // second count

However, when the ping program uses an IPPROTO_RAW socket,
ICMP_MIB_OUTMSGS is counted correctly only once.

Therefore, the first count should be removed.

Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Signed-off-by: yuan.gao <yuan.gao@ucloud.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251224063145.3615282-1-yuan.gao@ucloud.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ping.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c
index 5178a3f3cb537..cadf743ab4f52 100644
--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -848,10 +848,8 @@ static int ping_v4_sendmsg(struct sock *sk, struct msghdr *msg, size_t len)
 out_free:
 	if (free)
 		kfree(ipc.opt);
-	if (!err) {
-		icmp_out_count(sock_net(sk), user_icmph.type);
+	if (!err)
 		return len;
-	}
 	return err;
 
 do_confirm:
-- 
2.51.0

[PATCH 6.1 40/72] net: sock: fix hardened usercopy panic in sock_recv_errqueue

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Weiming Shi <bestswngs@gmail.com>

[ Upstream commit 2a71a1a8d0ed718b1c7a9ac61f07e5755c47ae20 ]

skbuff_fclone_cache was created without defining a usercopy region,
[1] unlike skbuff_head_cache which properly whitelists the cb[] field.
[2] This causes a usercopy BUG() when CONFIG_HARDENED_USERCOPY is
enabled and the kernel attempts to copy sk_buff.cb data to userspace
via sock_recv_errqueue() -> put_cmsg().

The crash occurs when: 1. TCP allocates an skb using alloc_skb_fclone()
   (from skbuff_fclone_cache) [1]
2. The skb is cloned via skb_clone() using the pre-allocated fclone
[3] 3. The cloned skb is queued to sk_error_queue for timestamp
reporting 4. Userspace reads the error queue via recvmsg(MSG_ERRQUEUE)
5. sock_recv_errqueue() calls put_cmsg() to copy serr->ee from skb->cb
[4] 6. __check_heap_object() fails because skbuff_fclone_cache has no
   usercopy whitelist [5]

When cloned skbs allocated from skbuff_fclone_cache are used in the
socket error queue, accessing the sock_exterr_skb structure in skb->cb
via put_cmsg() triggers a usercopy hardening violation:

[    5.379589] usercopy: Kernel memory exposure attempt detected from SLUB object 'skbuff_fclone_cache' (offset 296, size 16)!
[    5.382796] kernel BUG at mm/usercopy.c:102!
[    5.383923] Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
[    5.384903] CPU: 1 UID: 0 PID: 138 Comm: poc_put_cmsg Not tainted 6.12.57 #7
[    5.384903] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    5.384903] RIP: 0010:usercopy_abort+0x6c/0x80
[    5.384903] Code: 1a 86 51 48 c7 c2 40 15 1a 86 41 52 48 c7 c7 c0 15 1a 86 48 0f 45 d6 48 c7 c6 80 15 1a 86 48 89 c1 49 0f 45 f3 e8 84 27 88 ff <0f> 0b 490
[    5.384903] RSP: 0018:ffffc900006f77a8 EFLAGS: 00010246
[    5.384903] RAX: 000000000000006f RBX: ffff88800f0ad2a8 RCX: 1ffffffff0f72e74
[    5.384903] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff87b973a0
[    5.384903] RBP: 0000000000000010 R08: 0000000000000000 R09: fffffbfff0f72e74
[    5.384903] R10: 0000000000000003 R11: 79706f6372657375 R12: 0000000000000001
[    5.384903] R13: ffff88800f0ad2b8 R14: ffffea00003c2b40 R15: ffffea00003c2b00
[    5.384903] FS:  0000000011bc4380(0000) GS:ffff8880bf100000(0000) knlGS:0000000000000000
[    5.384903] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    5.384903] CR2: 000056aa3b8e5fe4 CR3: 000000000ea26004 CR4: 0000000000770ef0
[    5.384903] PKRU: 55555554
[    5.384903] Call Trace:
[    5.384903]  <TASK>
[    5.384903]  __check_heap_object+0x9a/0xd0
[    5.384903]  __check_object_size+0x46c/0x690
[    5.384903]  put_cmsg+0x129/0x5e0
[    5.384903]  sock_recv_errqueue+0x22f/0x380
[    5.384903]  tls_sw_recvmsg+0x7ed/0x1960
[    5.384903]  ? srso_alias_return_thunk+0x5/0xfbef5
[    5.384903]  ? schedule+0x6d/0x270
[    5.384903]  ? srso_alias_return_thunk+0x5/0xfbef5
[    5.384903]  ? mutex_unlock+0x81/0xd0
[    5.384903]  ? __pfx_mutex_unlock+0x10/0x10
[    5.384903]  ? __pfx_tls_sw_recvmsg+0x10/0x10
[    5.384903]  ? _raw_spin_lock_irqsave+0x8f/0xf0
[    5.384903]  ? _raw_read_unlock_irqrestore+0x20/0x40
[    5.384903]  ? srso_alias_return_thunk+0x5/0xfbef5

The crash offset 296 corresponds to skb2->cb within skbuff_fclones:
  - sizeof(struct sk_buff) = 232 - offsetof(struct sk_buff, cb) = 40 -
  offset of skb2.cb in fclones = 232 + 40 = 272 - crash offset 296 =
  272 + 24 (inside sock_exterr_skb.ee)

This patch uses a local stack variable as a bounce buffer to avoid the hardened usercopy check failure.

[1] https://elixir.bootlin.com/linux/v6.12.62/source/net/ipv4/tcp.c#L885
[2] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5104
[3] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5566
[4] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5491
[5] https://elixir.bootlin.com/linux/v6.12.62/source/mm/slub.c#L5719

Fixes: 6d07d1cd300f ("usercopy: Restrict non-usercopy caches to size 0")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251223203534.1392218-2-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/sock.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/net/core/sock.c b/net/core/sock.c
index 7702033680e7b..6c178b4742666 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -3614,7 +3614,7 @@ void sock_enable_timestamp(struct sock *sk, enum sock_flags flag)
 int sock_recv_errqueue(struct sock *sk, struct msghdr *msg, int len,
 		       int level, int type)
 {
-	struct sock_exterr_skb *serr;
+	struct sock_extended_err ee;
 	struct sk_buff *skb;
 	int copied, err;
 
@@ -3634,8 +3634,9 @@ int sock_recv_errqueue(struct sock *sk, struct msghdr *msg, int len,
 
 	sock_recv_timestamp(msg, sk, skb);
 
-	serr = SKB_EXT_ERR(skb);
-	put_cmsg(msg, level, type, sizeof(serr->ee), &serr->ee);
+	/* We must use a bounce buffer for CONFIG_HARDENED_USERCOPY=y */
+	ee = SKB_EXT_ERR(skb)->ee;
+	put_cmsg(msg, level, type, sizeof(ee), &ee);
 
 	msg->msg_flags |= MSG_ERRQUEUE;
 	err = copied;
-- 
2.51.0

[PATCH 6.1 41/72] netdev: preserve NETIF_F_ALL_FOR_ALL across TSO updates

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Di Zhu <zhud@hygon.cn>

[ Upstream commit 02d1e1a3f9239cdb3ecf2c6d365fb959d1bf39df ]

Directly increment the TSO features incurs a side effect: it will also
directly clear the flags in NETIF_F_ALL_FOR_ALL on the master device,
which can cause issues such as the inability to enable the nocache copy
feature on the bonding driver.

The fix is to include NETIF_F_ALL_FOR_ALL in the update mask, thereby
preventing it from being cleared.

Fixes: b0ce3508b25e ("bonding: allow TSO being set on bonding master")
Signed-off-by: Di Zhu <zhud@hygon.cn>
Link: https://patch.msgid.link/20251224012224.56185-1-zhud@hygon.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/netdevice.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index f44701b82ea80..1c47ab59a2c7f 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -4951,7 +4951,8 @@ netdev_features_t netdev_increment_features(netdev_features_t all,
 static inline netdev_features_t netdev_add_tso_features(netdev_features_t features,
 							netdev_features_t mask)
 {
-	return netdev_increment_features(features, NETIF_F_ALL_TSO, mask);
+	return netdev_increment_features(features, NETIF_F_ALL_TSO |
+					 NETIF_F_ALL_FOR_ALL, mask);
 }
 
 int __netdev_update_features(struct net_device *dev);
-- 
2.51.0

[PATCH 6.1 42/72] net/mlx5e: Dont print error message due to invalid module

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gal Pressman <gal@nvidia.com>

[ Upstream commit 144297e2a24e3e54aee1180ec21120ea38822b97 ]

Dumping module EEPROM on newer modules is supported through the netlink
interface only.

Querying with old userspace ethtool (or other tools, such as 'lshw')
which still uses the ioctl interface results in an error message that
could flood dmesg (in addition to the expected error return value).
The original message was added under the assumption that the driver
should be able to handle all module types, but now that such flows are
easily triggered from userspace, it doesn't serve its purpose.

Change the log level of the print in mlx5_query_module_eeprom() to
debug.

Fixes: bb64143eee8c ("net/mlx5e: Add ethtool support for dump module EEPROM")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20251225132717.358820-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/port.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c
index a1548e6bfb35d..28ec31722ec2f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c
@@ -432,7 +432,8 @@ int mlx5_query_module_eeprom(struct mlx5_core_dev *dev,
 		mlx5_qsfp_eeprom_params_set(&query.i2c_address, &query.page, &offset);
 		break;
 	default:
-		mlx5_core_err(dev, "Module ID not recognized: 0x%x\n", module_id);
+		mlx5_core_dbg(dev, "Module ID not recognized: 0x%x\n",
+			      module_id);
 		return -EINVAL;
 	}
 
-- 
2.51.0

[PATCH 6.1 43/72] net: wwan: iosm: Fix memory leak in ipc_mux_deinit()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zilin Guan <zilin@seu.edu.cn>

[ Upstream commit 92e6e0a87f6860a4710f9494f8c704d498ae60f8 ]

Commit 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
allocated memory for pp_qlt in ipc_mux_init() but did not free it in
ipc_mux_deinit(). This results in a memory leak when the driver is
unloaded.

Free the allocated memory in ipc_mux_deinit() to fix the leak.

Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Co-developed-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20251230071853.1062223-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wwan/iosm/iosm_ipc_mux.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/wwan/iosm/iosm_ipc_mux.c b/drivers/net/wwan/iosm/iosm_ipc_mux.c
index fc928b298a984..b846889fcb099 100644
--- a/drivers/net/wwan/iosm/iosm_ipc_mux.c
+++ b/drivers/net/wwan/iosm/iosm_ipc_mux.c
@@ -456,6 +456,7 @@ void ipc_mux_deinit(struct iosm_mux *ipc_mux)
 	struct sk_buff_head *free_list;
 	union mux_msg mux_msg;
 	struct sk_buff *skb;
+	int i;
 
 	if (!ipc_mux->initialized)
 		return;
@@ -479,5 +480,10 @@ void ipc_mux_deinit(struct iosm_mux *ipc_mux)
 		ipc_mux->channel->dl_pipe.is_open = false;
 	}
 
+	if (ipc_mux->protocol != MUX_LITE) {
+		for (i = 0; i < IPC_MEM_MUX_IP_SESSION_ENTRIES; i++)
+			kfree(ipc_mux->ul_adb.pp_qlt[i]);
+	}
+
 	kfree(ipc_mux);
 }
-- 
2.51.0

[PATCH 6.1 44/72] eth: bnxt: move and rename reset helpers

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit fea2993aecd74d5d11ede1ebbd60e478ebfed996 ]

Move the reset helpers, subsequent patches will need some
of them on the Tx path.

While at it rename bnxt_sched_reset(), on more recent chips
it schedules a queue reset, instead of a fuller reset.

Link: https://lore.kernel.org/r/20230720010440.1967136-2-kuba@kernel.org
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: ffeafa65b2b2 ("bnxt_en: Fix potential data corruption with HW GRO/LRO")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 72 +++++++++++------------
 1 file changed, 36 insertions(+), 36 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 6b1245a3ab4b1..2540402030bf1 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -293,6 +293,38 @@ static void bnxt_db_cq(struct bnxt *bp, struct bnxt_db_info *db, u32 idx)
 		BNXT_DB_CQ(db, idx);
 }
 
+static void bnxt_queue_fw_reset_work(struct bnxt *bp, unsigned long delay)
+{
+	if (!(test_bit(BNXT_STATE_IN_FW_RESET, &bp->state)))
+		return;
+
+	if (BNXT_PF(bp))
+		queue_delayed_work(bnxt_pf_wq, &bp->fw_reset_task, delay);
+	else
+		schedule_delayed_work(&bp->fw_reset_task, delay);
+}
+
+static void bnxt_queue_sp_work(struct bnxt *bp)
+{
+	if (BNXT_PF(bp))
+		queue_work(bnxt_pf_wq, &bp->sp_task);
+	else
+		schedule_work(&bp->sp_task);
+}
+
+static void bnxt_sched_reset_rxr(struct bnxt *bp, struct bnxt_rx_ring_info *rxr)
+{
+	if (!rxr->bnapi->in_reset) {
+		rxr->bnapi->in_reset = true;
+		if (bp->flags & BNXT_FLAG_CHIP_P5)
+			set_bit(BNXT_RESET_TASK_SP_EVENT, &bp->sp_event);
+		else
+			set_bit(BNXT_RST_RING_SP_EVENT, &bp->sp_event);
+		bnxt_queue_sp_work(bp);
+	}
+	rxr->rx_next_cons = 0xffff;
+}
+
 const u16 bnxt_lhint_arr[] = {
 	TX_BD_FLAGS_LHINT_512_AND_SMALLER,
 	TX_BD_FLAGS_LHINT_512_TO_1023,
@@ -1269,38 +1301,6 @@ static int bnxt_discard_rx(struct bnxt *bp, struct bnxt_cp_ring_info *cpr,
 	return 0;
 }
 
-static void bnxt_queue_fw_reset_work(struct bnxt *bp, unsigned long delay)
-{
-	if (!(test_bit(BNXT_STATE_IN_FW_RESET, &bp->state)))
-		return;
-
-	if (BNXT_PF(bp))
-		queue_delayed_work(bnxt_pf_wq, &bp->fw_reset_task, delay);
-	else
-		schedule_delayed_work(&bp->fw_reset_task, delay);
-}
-
-static void bnxt_queue_sp_work(struct bnxt *bp)
-{
-	if (BNXT_PF(bp))
-		queue_work(bnxt_pf_wq, &bp->sp_task);
-	else
-		schedule_work(&bp->sp_task);
-}
-
-static void bnxt_sched_reset(struct bnxt *bp, struct bnxt_rx_ring_info *rxr)
-{
-	if (!rxr->bnapi->in_reset) {
-		rxr->bnapi->in_reset = true;
-		if (bp->flags & BNXT_FLAG_CHIP_P5)
-			set_bit(BNXT_RESET_TASK_SP_EVENT, &bp->sp_event);
-		else
-			set_bit(BNXT_RST_RING_SP_EVENT, &bp->sp_event);
-		bnxt_queue_sp_work(bp);
-	}
-	rxr->rx_next_cons = 0xffff;
-}
-
 static u16 bnxt_alloc_agg_idx(struct bnxt_rx_ring_info *rxr, u16 agg_id)
 {
 	struct bnxt_tpa_idx_map *map = rxr->rx_tpa_idx_map;
@@ -1355,7 +1355,7 @@ static void bnxt_tpa_start(struct bnxt *bp, struct bnxt_rx_ring_info *rxr,
 		netdev_warn(bp->dev, "TPA cons %x, expected cons %x, error code %x\n",
 			    cons, rxr->rx_next_cons,
 			    TPA_START_ERROR_CODE(tpa_start1));
-		bnxt_sched_reset(bp, rxr);
+		bnxt_sched_reset_rxr(bp, rxr);
 		return;
 	}
 	/* Store cfa_code in tpa_info to use in tpa_end
@@ -1895,7 +1895,7 @@ static int bnxt_rx_pkt(struct bnxt *bp, struct bnxt_cp_ring_info *cpr,
 		if (rxr->rx_next_cons != 0xffff)
 			netdev_warn(bp->dev, "RX cons %x != expected cons %x\n",
 				    cons, rxr->rx_next_cons);
-		bnxt_sched_reset(bp, rxr);
+		bnxt_sched_reset_rxr(bp, rxr);
 		if (rc1)
 			return rc1;
 		goto next_rx_no_prod_no_len;
@@ -1933,7 +1933,7 @@ static int bnxt_rx_pkt(struct bnxt *bp, struct bnxt_cp_ring_info *cpr,
 			    !(bp->fw_cap & BNXT_FW_CAP_RING_MONITOR)) {
 				netdev_warn_once(bp->dev, "RX buffer error %x\n",
 						 rx_err);
-				bnxt_sched_reset(bp, rxr);
+				bnxt_sched_reset_rxr(bp, rxr);
 			}
 		}
 		goto next_rx_no_len;
@@ -2371,7 +2371,7 @@ static int bnxt_async_event_process(struct bnxt *bp,
 			goto async_event_process_exit;
 		}
 		rxr = bp->bnapi[grp_idx]->rx_ring;
-		bnxt_sched_reset(bp, rxr);
+		bnxt_sched_reset_rxr(bp, rxr);
 		goto async_event_process_exit;
 	}
 	case ASYNC_EVENT_CMPL_EVENT_ID_ECHO_REQUEST: {
-- 
2.51.0

[PATCH 6.1 45/72] bnxt_en: Fix potential data corruption with HW GRO/LRO

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Srijit Bose <srijit.bose@broadcom.com>

[ Upstream commit ffeafa65b2b26df2f5b5a6118d3174f17bd12ec5 ]

Fix the max number of bits passed to find_first_zero_bit() in
bnxt_alloc_agg_idx().  We were incorrectly passing the number of
long words.  find_first_zero_bit() may fail to find a zero bit and
cause a wrong ID to be used.  If the wrong ID is already in use, this
can cause data corruption.  Sometimes an error like this can also be
seen:

bnxt_en 0000:83:00.0 enp131s0np0: TPA end agg_buf 2 != expected agg_bufs 1

Fix it by passing the correct number of bits MAX_TPA_P5.  Use
DECLARE_BITMAP() to more cleanly define the bitmap.  Add a sanity
check to warn if a bit cannot be found and reset the ring [MChan].

Fixes: ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for 57500 chips.")
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Srijit Bose <srijit.bose@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251231083625.3911652-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 15 ++++++++++++---
 drivers/net/ethernet/broadcom/bnxt/bnxt.h |  4 +---
 2 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 2540402030bf1..a70870393b65c 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -1306,9 +1306,11 @@ static u16 bnxt_alloc_agg_idx(struct bnxt_rx_ring_info *rxr, u16 agg_id)
 	struct bnxt_tpa_idx_map *map = rxr->rx_tpa_idx_map;
 	u16 idx = agg_id & MAX_TPA_P5_MASK;
 
-	if (test_bit(idx, map->agg_idx_bmap))
-		idx = find_first_zero_bit(map->agg_idx_bmap,
-					  BNXT_AGG_IDX_BMAP_SIZE);
+	if (test_bit(idx, map->agg_idx_bmap)) {
+		idx = find_first_zero_bit(map->agg_idx_bmap, MAX_TPA_P5);
+		if (idx >= MAX_TPA_P5)
+			return INVALID_HW_RING_ID;
+	}
 	__set_bit(idx, map->agg_idx_bmap);
 	map->agg_id_tbl[agg_id] = idx;
 	return idx;
@@ -1341,6 +1343,13 @@ static void bnxt_tpa_start(struct bnxt *bp, struct bnxt_rx_ring_info *rxr,
 	if (bp->flags & BNXT_FLAG_CHIP_P5) {
 		agg_id = TPA_START_AGG_ID_P5(tpa_start);
 		agg_id = bnxt_alloc_agg_idx(rxr, agg_id);
+		if (unlikely(agg_id == INVALID_HW_RING_ID)) {
+			netdev_warn(bp->dev, "Unable to allocate agg ID for ring %d, agg 0x%x\n",
+				    rxr->bnapi->index,
+				    TPA_START_AGG_ID_P5(tpa_start));
+			bnxt_sched_reset_rxr(bp, rxr);
+			return;
+		}
 	} else {
 		agg_id = TPA_START_AGG_ID(tpa_start);
 	}
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 111098b4b6062..4d27636aa200d 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -897,11 +897,9 @@ struct bnxt_tpa_info {
 	struct rx_agg_cmp	*agg_arr;
 };
 
-#define BNXT_AGG_IDX_BMAP_SIZE	(MAX_TPA_P5 / BITS_PER_LONG)
-
 struct bnxt_tpa_idx_map {
 	u16		agg_id_tbl[1024];
-	unsigned long	agg_idx_bmap[BNXT_AGG_IDX_BMAP_SIZE];
+	DECLARE_BITMAP(agg_idx_bmap, MAX_TPA_P5);
 };
 
 struct bnxt_rx_ring_info {
-- 
2.51.0

[PATCH 6.1 46/72] net: fix memory leak in skb_segment_list for GRO packets

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mohammad Heib <mheib@redhat.com>

[ Upstream commit 238e03d0466239410b72294b79494e43d4fabe77 ]

When skb_segment_list() is called during packet forwarding, it handles
packets that were aggregated by the GRO engine.

Historically, the segmentation logic in skb_segment_list assumes that
individual segments are split from a parent SKB and may need to carry
their own socket memory accounting. Accordingly, the code transfers
truesize from the parent to the newly created segments.

Prior to commit ed4cccef64c1 ("gro: fix ownership transfer"), this
truesize subtraction in skb_segment_list() was valid because fragments
still carry a reference to the original socket.

However, commit ed4cccef64c1 ("gro: fix ownership transfer") changed
this behavior by ensuring that fraglist entries are explicitly
orphaned (skb->sk = NULL) to prevent illegal orphaning later in the
stack. This change meant that the entire socket memory charge remained
with the head SKB, but the corresponding accounting logic in
skb_segment_list() was never updated.

As a result, the current code unconditionally adds each fragment's
truesize to delta_truesize and subtracts it from the parent SKB. Since
the fragments are no longer charged to the socket, this subtraction
results in an effective under-count of memory when the head is freed.
This causes sk_wmem_alloc to remain non-zero, preventing socket
destruction and leading to a persistent memory leak.

The leak can be observed via KMEMLEAK when tearing down the networking
environment:

unreferenced object 0xffff8881e6eb9100 (size 2048):
  comm "ping", pid 6720, jiffies 4295492526
  backtrace:
    kmem_cache_alloc_noprof+0x5c6/0x800
    sk_prot_alloc+0x5b/0x220
    sk_alloc+0x35/0xa00
    inet6_create.part.0+0x303/0x10d0
    __sock_create+0x248/0x640
    __sys_socket+0x11b/0x1d0

Since skb_segment_list() is exclusively used for SKB_GSO_FRAGLIST
packets constructed by GRO, the truesize adjustment is removed.

The call to skb_release_head_state() must be preserved. As documented in
commit cf673ed0e057 ("net: fix fraglist segmentation reference count
leak"), it is still required to correctly drop references to SKB
extensions that may be overwritten during __copy_skb_header().

Fixes: ed4cccef64c1 ("gro: fix ownership transfer")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260104213101.352887-1-mheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/skbuff.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index d8a3ada886ffb..ef24911af05a8 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -4045,12 +4045,14 @@ struct sk_buff *skb_segment_list(struct sk_buff *skb,
 {
 	struct sk_buff *list_skb = skb_shinfo(skb)->frag_list;
 	unsigned int tnl_hlen = skb_tnl_header_len(skb);
-	unsigned int delta_truesize = 0;
 	unsigned int delta_len = 0;
 	struct sk_buff *tail = NULL;
 	struct sk_buff *nskb, *tmp;
 	int len_diff, err;
 
+	/* Only skb_gro_receive_list generated skbs arrive here */
+	DEBUG_NET_WARN_ON_ONCE(!(skb_shinfo(skb)->gso_type & SKB_GSO_FRAGLIST));
+
 	skb_push(skb, -skb_network_offset(skb) + offset);
 
 	/* Ensure the head is writeable before touching the shared info */
@@ -4064,8 +4066,9 @@ struct sk_buff *skb_segment_list(struct sk_buff *skb,
 		nskb = list_skb;
 		list_skb = list_skb->next;
 
+		DEBUG_NET_WARN_ON_ONCE(nskb->sk);
+
 		err = 0;
-		delta_truesize += nskb->truesize;
 		if (skb_shared(nskb)) {
 			tmp = skb_clone(nskb, GFP_ATOMIC);
 			if (tmp) {
@@ -4108,7 +4111,6 @@ struct sk_buff *skb_segment_list(struct sk_buff *skb,
 			goto err_linearize;
 	}
 
-	skb->truesize = skb->truesize - delta_truesize;
 	skb->data_len = skb->data_len - delta_len;
 	skb->len = skb->len - delta_len;
 
-- 
2.51.0

[PATCH 6.1 47/72] HID: quirks: work around VID/PID conflict for appledisplay

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: René Rebe <rene@exactco.de>

[ Upstream commit c7fabe4ad9219866c203164a214c474c95b36bf2 ]

For years I wondered why the Apple Cinema Display driver would not
just work for me. Turns out the hidraw driver instantly takes it
over. Fix by adding appledisplay VID/PIDs to hid_have_special_driver.

Fixes: 069e8a65cd79 ("Driver for Apple Cinema Display")
Signed-off-by: René Rebe <rene@exactco.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-quirks.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index 249e626d1c6a3..b6bec3614cfea 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -220,6 +220,15 @@ static const struct hid_device_id hid_quirks[] = {
  * used as a driver. See hid_scan_report().
  */
 static const struct hid_device_id hid_have_special_driver[] = {
+#if IS_ENABLED(CONFIG_APPLEDISPLAY)
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, 0x9218) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, 0x9219) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, 0x921c) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, 0x921d) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, 0x9222) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, 0x9226) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, 0x9236) },
+#endif
 #if IS_ENABLED(CONFIG_HID_A4TECH)
 	{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) },
-- 
2.51.0

[PATCH 6.1 48/72] net/sched: sch_qfq: Fix NULL deref when deactivating inactive aggregate in qfq_reset

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xiang Mei <xmei5@asu.edu>

[ Upstream commit c1d73b1480235731e35c81df70b08f4714a7d095 ]

`qfq_class->leaf_qdisc->q.qlen > 0` does not imply that the class
itself is active.

Two qfq_class objects may point to the same leaf_qdisc. This happens
when:

1. one QFQ qdisc is attached to the dev as the root qdisc, and

2. another QFQ qdisc is temporarily referenced (e.g., via qdisc_get()
/ qdisc_put()) and is pending to be destroyed, as in function
tc_new_tfilter.

When packets are enqueued through the root QFQ qdisc, the shared
leaf_qdisc->q.qlen increases. At the same time, the second QFQ
qdisc triggers qdisc_put and qdisc_destroy: the qdisc enters
qfq_reset() with its own q->q.qlen == 0, but its class's leaf
qdisc->q.qlen > 0. Therefore, the qfq_reset would wrongly deactivate
an inactive aggregate and trigger a null-deref in qfq_deactivate_agg:

[    0.903172] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    0.903571] #PF: supervisor write access in kernel mode
[    0.903860] #PF: error_code(0x0002) - not-present page
[    0.904177] PGD 10299b067 P4D 10299b067 PUD 10299c067 PMD 0
[    0.904502] Oops: Oops: 0002 [#1] SMP NOPTI
[    0.904737] CPU: 0 UID: 0 PID: 135 Comm: exploit Not tainted 6.19.0-rc3+ #2 NONE
[    0.905157] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
[    0.905754] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:992 (discriminator 2) include/linux/list.h:1006 (discriminator 2) net/sched/sch_qfq.c:1367 (discriminator 2) net/sched/sch_qfq.c:1393 (discriminator 2))
[    0.906046] Code: 0f 84 4d 01 00 00 48 89 70 18 8b 4b 10 48 c7 c2 ff ff ff ff 48 8b 78 08 48 d3 e2 48 21 f2 48 2b 13 48 8b 30 48 d3 ea 8b 4b 18 0

Code starting with the faulting instruction
===========================================
   0:	0f 84 4d 01 00 00    	je     0x153
   6:	48 89 70 18          	mov    %rsi,0x18(%rax)
   a:	8b 4b 10             	mov    0x10(%rbx),%ecx
   d:	48 c7 c2 ff ff ff ff 	mov    $0xffffffffffffffff,%rdx
  14:	48 8b 78 08          	mov    0x8(%rax),%rdi
  18:	48 d3 e2             	shl    %cl,%rdx
  1b:	48 21 f2             	and    %rsi,%rdx
  1e:	48 2b 13             	sub    (%rbx),%rdx
  21:	48 8b 30             	mov    (%rax),%rsi
  24:	48 d3 ea             	shr    %cl,%rdx
  27:	8b 4b 18             	mov    0x18(%rbx),%ecx
	...
[    0.907095] RSP: 0018:ffffc900004a39a0 EFLAGS: 00010246
[    0.907368] RAX: ffff8881043a0880 RBX: ffff888102953340 RCX: 0000000000000000
[    0.907723] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[    0.908100] RBP: ffff888102952180 R08: 0000000000000000 R09: 0000000000000000
[    0.908451] R10: ffff8881043a0000 R11: 0000000000000000 R12: ffff888102952000
[    0.908804] R13: ffff888102952180 R14: ffff8881043a0ad8 R15: ffff8881043a0880
[    0.909179] FS:  000000002a1a0380(0000) GS:ffff888196d8d000(0000) knlGS:0000000000000000
[    0.909572] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.909857] CR2: 0000000000000000 CR3: 0000000102993002 CR4: 0000000000772ef0
[    0.910247] PKRU: 55555554
[    0.910391] Call Trace:
[    0.910527]  <TASK>
[    0.910638]  qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1485)
[    0.910826]  qdisc_reset (include/linux/skbuff.h:2195 include/linux/skbuff.h:2501 include/linux/skbuff.h:3424 include/linux/skbuff.h:3430 net/sched/sch_generic.c:1036)
[    0.911040]  __qdisc_destroy (net/sched/sch_generic.c:1076)
[    0.911236]  tc_new_tfilter (net/sched/cls_api.c:2447)
[    0.911447]  rtnetlink_rcv_msg (net/core/rtnetlink.c:6958)
[    0.911663]  ? __pfx_rtnetlink_rcv_msg (net/core/rtnetlink.c:6861)
[    0.911894]  netlink_rcv_skb (net/netlink/af_netlink.c:2550)
[    0.912100]  netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
[    0.912296]  ? __alloc_skb (net/core/skbuff.c:706)
[    0.912484]  netlink_sendmsg (net/netlink/af_netlink.c:1894)
[    0.912682]  sock_write_iter (net/socket.c:727 (discriminator 1) net/socket.c:742 (discriminator 1) net/socket.c:1195 (discriminator 1))
[    0.912880]  vfs_write (fs/read_write.c:593 fs/read_write.c:686)
[    0.913077]  ksys_write (fs/read_write.c:738)
[    0.913252]  do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
[    0.913438]  entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131)
[    0.913687] RIP: 0033:0x424c34
[    0.913844] Code: 89 02 48 c7 c0 ff ff ff ff eb bd 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d 2d 44 09 00 00 74 13 b8 01 00 00 00 0f 05 9

Code starting with the faulting instruction
===========================================
   0:	89 02                	mov    %eax,(%rdx)
   2:	48 c7 c0 ff ff ff ff 	mov    $0xffffffffffffffff,%rax
   9:	eb bd                	jmp    0xffffffffffffffc8
   b:	66 2e 0f 1f 84 00 00 	cs nopw 0x0(%rax,%rax,1)
  12:	00 00 00
  15:	90                   	nop
  16:	f3 0f 1e fa          	endbr64
  1a:	80 3d 2d 44 09 00 00 	cmpb   $0x0,0x9442d(%rip)        # 0x9444e
  21:	74 13                	je     0x36
  23:	b8 01 00 00 00       	mov    $0x1,%eax
  28:	0f 05                	syscall
  2a:	09                   	.byte 0x9
[    0.914807] RSP: 002b:00007ffea1938b78 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[    0.915197] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 0000000000424c34
[    0.915556] RDX: 000000000000003c RSI: 000000002af378c0 RDI: 0000000000000003
[    0.915912] RBP: 00007ffea1938bc0 R08: 00000000004b8820 R09: 0000000000000000
[    0.916297] R10: 0000000000000001 R11: 0000000000000202 R12: 00007ffea1938d28
[    0.916652] R13: 00007ffea1938d38 R14: 00000000004b3828 R15: 0000000000000001
[    0.917039]  </TASK>
[    0.917158] Modules linked in:
[    0.917316] CR2: 0000000000000000
[    0.917484] ---[ end trace 0000000000000000 ]---
[    0.917717] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:992 (discriminator 2) include/linux/list.h:1006 (discriminator 2) net/sched/sch_qfq.c:1367 (discriminator 2) net/sched/sch_qfq.c:1393 (discriminator 2))
[    0.917978] Code: 0f 84 4d 01 00 00 48 89 70 18 8b 4b 10 48 c7 c2 ff ff ff ff 48 8b 78 08 48 d3 e2 48 21 f2 48 2b 13 48 8b 30 48 d3 ea 8b 4b 18 0

Code starting with the faulting instruction
===========================================
   0:	0f 84 4d 01 00 00    	je     0x153
   6:	48 89 70 18          	mov    %rsi,0x18(%rax)
   a:	8b 4b 10             	mov    0x10(%rbx),%ecx
   d:	48 c7 c2 ff ff ff ff 	mov    $0xffffffffffffffff,%rdx
  14:	48 8b 78 08          	mov    0x8(%rax),%rdi
  18:	48 d3 e2             	shl    %cl,%rdx
  1b:	48 21 f2             	and    %rsi,%rdx
  1e:	48 2b 13             	sub    (%rbx),%rdx
  21:	48 8b 30             	mov    (%rax),%rsi
  24:	48 d3 ea             	shr    %cl,%rdx
  27:	8b 4b 18             	mov    0x18(%rbx),%ecx
	...
[    0.918902] RSP: 0018:ffffc900004a39a0 EFLAGS: 00010246
[    0.919198] RAX: ffff8881043a0880 RBX: ffff888102953340 RCX: 0000000000000000
[    0.919559] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[    0.919908] RBP: ffff888102952180 R08: 0000000000000000 R09: 0000000000000000
[    0.920289] R10: ffff8881043a0000 R11: 0000000000000000 R12: ffff888102952000
[    0.920648] R13: ffff888102952180 R14: ffff8881043a0ad8 R15: ffff8881043a0880
[    0.921014] FS:  000000002a1a0380(0000) GS:ffff888196d8d000(0000) knlGS:0000000000000000
[    0.921424] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.921710] CR2: 0000000000000000 CR3: 0000000102993002 CR4: 0000000000772ef0
[    0.922097] PKRU: 55555554
[    0.922240] Kernel panic - not syncing: Fatal exception
[    0.922590] Kernel Offset: disabled

Fixes: 0545a3037773 ("pkt_sched: QFQ - quick fair queue scheduler")
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260106034100.1780779-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_qfq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sched/sch_qfq.c b/net/sched/sch_qfq.c
index 896ff7c741110..80a7173843b90 100644
--- a/net/sched/sch_qfq.c
+++ b/net/sched/sch_qfq.c
@@ -1483,7 +1483,7 @@ static void qfq_reset_qdisc(struct Qdisc *sch)
 
 	for (i = 0; i < q->clhash.hashsize; i++) {
 		hlist_for_each_entry(cl, &q->clhash.hash[i], common.hnode) {
-			if (cl->qdisc->q.qlen > 0)
+			if (cl_is_active(cl))
 				qfq_deactivate_class(q, cl);
 
 			qdisc_reset(cl->qdisc);
-- 
2.51.0

[PATCH 6.1 49/72] net: usb: pegasus: fix memory leak in update_eth_regs_async()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Petko Manolov <petkan@nucleusys.com>

[ Upstream commit afa27621a28af317523e0836dad430bec551eb54 ]

When asynchronously writing to the device registers and if usb_submit_urb()
fail, the code fail to release allocated to this point resources.

Fixes: 323b34963d11 ("drivers: net: usb: pegasus: fix control urb submission")
Signed-off-by: Petko Manolov <petkan@nucleusys.com>
Link: https://patch.msgid.link/20260106084821.3746677-1-petko.manolov@konsulko.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/pegasus.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index 81ca64debc5b9..c514483134f05 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -168,6 +168,8 @@ static int update_eth_regs_async(pegasus_t *pegasus)
 			netif_device_detach(pegasus->net);
 		netif_err(pegasus, drv, pegasus->net,
 			  "%s returned %d\n", __func__, ret);
+		usb_free_urb(async_urb);
+		kfree(req);
 	}
 	return ret;
 }
-- 
2.51.0

[PATCH 6.1 50/72] net: enetc: fix build warning when PAGE_SIZE is greater than 128K

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Fang <wei.fang@nxp.com>

[ Upstream commit 4b5bdabb5449b652122e43f507f73789041d4abe ]

The max buffer size of ENETC RX BD is 0xFFFF bytes, so if the PAGE_SIZE
is greater than 128K, ENETC_RXB_DMA_SIZE and ENETC_RXB_DMA_SIZE_XDP will
be greater than 0xFFFF, thus causing a build warning.

This will not cause any practical issues because ENETC is currently only
used on the ARM64 platform, and the max PAGE_SIZE is 64K. So this patch
is only for fixing the build warning that occurs when compiling ENETC
drivers for other platforms.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601050637.kHEKKOG7-lkp@intel.com/
Fixes: e59bc32df2e9 ("net: enetc: correct the value of ENETC_RXB_TRUESIZE")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260107091204.1980222-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/enetc/enetc.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc.h b/drivers/net/ethernet/freescale/enetc/enetc.h
index aacdfe98b65ab..d2ad5be02a0d8 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc.h
@@ -43,9 +43,9 @@ struct enetc_tx_swbd {
 #define ENETC_RXB_TRUESIZE	(PAGE_SIZE >> 1)
 #define ENETC_RXB_PAD		NET_SKB_PAD /* add extra space if needed */
 #define ENETC_RXB_DMA_SIZE	\
-	(SKB_WITH_OVERHEAD(ENETC_RXB_TRUESIZE) - ENETC_RXB_PAD)
+	min(SKB_WITH_OVERHEAD(ENETC_RXB_TRUESIZE) - ENETC_RXB_PAD, 0xffff)
 #define ENETC_RXB_DMA_SIZE_XDP	\
-	(SKB_WITH_OVERHEAD(ENETC_RXB_TRUESIZE) - XDP_PACKET_HEADROOM)
+	min(SKB_WITH_OVERHEAD(ENETC_RXB_TRUESIZE) - XDP_PACKET_HEADROOM, 0xffff)
 
 struct enetc_rx_swbd {
 	dma_addr_t dma;
-- 
2.51.0

[PATCH 6.1 51/72] arp: do not assume dev_hard_header() does not change skb->head

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit c92510f5e3f82ba11c95991824a41e59a9c5ed81 ]

arp_create() is the only dev_hard_header() caller
making assumption about skb->head being unchanged.

A recent commit broke this assumption.

Initialize @arp pointer after dev_hard_header() call.

Fixes: db5b4e39c4e6 ("ip6_gre: make ip6gre_header() robust")
Reported-by: syzbot+58b44a770a1585795351@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260107212250.384552-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/arp.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index 50e2b4939d8e9..fc8c7a34b53e6 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -563,7 +563,7 @@ struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip,
 
 	skb_reserve(skb, hlen);
 	skb_reset_network_header(skb);
-	arp = skb_put(skb, arp_hdr_len(dev));
+	skb_put(skb, arp_hdr_len(dev));
 	skb->dev = dev;
 	skb->protocol = htons(ETH_P_ARP);
 	if (!src_hw)
@@ -571,12 +571,13 @@ struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip,
 	if (!dest_hw)
 		dest_hw = dev->broadcast;
 
-	/*
-	 *	Fill the device header for the ARP frame
+	/* Fill the device header for the ARP frame.
+	 * Note: skb->head can be changed.
 	 */
 	if (dev_hard_header(skb, dev, ptype, dest_hw, src_hw, skb->len) < 0)
 		goto out;
 
+	arp = arp_hdr(skb);
 	/*
 	 * Fill out the arp protocol part.
 	 *
-- 
2.51.0

[PATCH 6.1 52/72] pinctrl: qcom: lpass-lpi: mark the GPIO controller as sleeping

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

commit ebc18e9854e5a2b62a041fb57b216a903af45b85 upstream.

The gpio_chip settings in this driver say the controller can't sleep
but it actually uses a mutex for synchronization. This triggers the
following BUG():

[    9.233659] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281
[    9.233665] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 554, name: (udev-worker)
[    9.233669] preempt_count: 1, expected: 0
[    9.233673] RCU nest depth: 0, expected: 0
[    9.233688] Tainted: [W]=WARN
[    9.233690] Hardware name: Dell Inc. Latitude 7455/0FK7MX, BIOS 2.10.1 05/20/2025
[    9.233694] Call trace:
[    9.233696]  show_stack+0x24/0x38 (C)
[    9.233709]  dump_stack_lvl+0x40/0x88
[    9.233716]  dump_stack+0x18/0x24
[    9.233722]  __might_resched+0x148/0x160
[    9.233731]  __might_sleep+0x38/0x98
[    9.233736]  mutex_lock+0x30/0xd8
[    9.233749]  lpi_config_set+0x2e8/0x3c8 [pinctrl_lpass_lpi]
[    9.233757]  lpi_gpio_direction_output+0x58/0x90 [pinctrl_lpass_lpi]
[    9.233761]  gpiod_direction_output_raw_commit+0x110/0x428
[    9.233772]  gpiod_direction_output_nonotify+0x234/0x358
[    9.233779]  gpiod_direction_output+0x38/0xd0
[    9.233786]  gpio_shared_proxy_direction_output+0xb8/0x2a8 [gpio_shared_proxy]
[    9.233792]  gpiod_direction_output_raw_commit+0x110/0x428
[    9.233799]  gpiod_direction_output_nonotify+0x234/0x358
[    9.233806]  gpiod_configure_flags+0x2c0/0x580
[    9.233812]  gpiod_find_and_request+0x358/0x4f8
[    9.233819]  gpiod_get_index+0x7c/0x98
[    9.233826]  devm_gpiod_get+0x34/0xb0
[    9.233829]  reset_gpio_probe+0x58/0x128 [reset_gpio]
[    9.233836]  auxiliary_bus_probe+0xb0/0xf0
[    9.233845]  really_probe+0x14c/0x450
[    9.233853]  __driver_probe_device+0xb0/0x188
[    9.233858]  driver_probe_device+0x4c/0x250
[    9.233863]  __driver_attach+0xf8/0x2a0
[    9.233868]  bus_for_each_dev+0xf8/0x158
[    9.233872]  driver_attach+0x30/0x48
[    9.233876]  bus_add_driver+0x158/0x2b8
[    9.233880]  driver_register+0x74/0x118
[    9.233886]  __auxiliary_driver_register+0x94/0xe8
[    9.233893]  init_module+0x34/0xfd0 [reset_gpio]
[    9.233898]  do_one_initcall+0xec/0x300
[    9.233903]  do_init_module+0x64/0x260
[    9.233910]  load_module+0x16c4/0x1900
[    9.233915]  __arm64_sys_finit_module+0x24c/0x378
[    9.233919]  invoke_syscall+0x4c/0xe8
[    9.233925]  el0_svc_common+0x8c/0xf0
[    9.233929]  do_el0_svc+0x28/0x40
[    9.233934]  el0_svc+0x38/0x100
[    9.233938]  el0t_64_sync_handler+0x84/0x130
[    9.233943]  el0t_64_sync+0x17c/0x180

Mark the controller as sleeping.

Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Cc: stable@vger.kernel.org
Reported-by: Val Packett <val@packett.cool>
Closes: https://lore.kernel.org/all/98c0f185-b0e0-49ea-896c-f3972dd011ca@packett.cool/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pinctrl/qcom/pinctrl-lpass-lpi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
@@ -435,7 +435,7 @@ int lpi_pinctrl_probe(struct platform_de
 	pctrl->chip.ngpio = data->npins;
 	pctrl->chip.label = dev_name(dev);
 	pctrl->chip.of_gpio_n_cells = 2;
-	pctrl->chip.can_sleep = false;
+	pctrl->chip.can_sleep = true;
 
 	mutex_init(&pctrl->lock);
 

[PATCH 6.1 53/72] mm/pagewalk: add walk_page_range_vma()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Hildenbrand <david@redhat.com>

[ Upstream commit e07cda5f232fac4de0925d8a4c92e51e41fa2f6e ]

Let's add walk_page_range_vma(), which is similar to walk_page_vma(),
however, is only interested in a subset of the VMA range.

To be used in KSM code to stop using follow_page() next.

Link: https://lkml.kernel.org/r/20221021101141.84170-8-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: f5548c318d6 ("ksm: use range-walk function to jump over holes in scan_get_next_rmap_item")
Signed-off-by: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/pagewalk.h |    3 +++
 mm/pagewalk.c            |   20 ++++++++++++++++++++
 2 files changed, 23 insertions(+)

--- a/include/linux/pagewalk.h
+++ b/include/linux/pagewalk.h
@@ -99,6 +99,9 @@ int walk_page_range_novma(struct mm_stru
 			  unsigned long end, const struct mm_walk_ops *ops,
 			  pgd_t *pgd,
 			  void *private);
+int walk_page_range_vma(struct vm_area_struct *vma, unsigned long start,
+			unsigned long end, const struct mm_walk_ops *ops,
+			void *private);
 int walk_page_vma(struct vm_area_struct *vma, const struct mm_walk_ops *ops,
 		void *private);
 int walk_page_mapping(struct address_space *mapping, pgoff_t first_index,
--- a/mm/pagewalk.c
+++ b/mm/pagewalk.c
@@ -517,6 +517,26 @@ int walk_page_range_novma(struct mm_stru
 	return walk_pgd_range(start, end, &walk);
 }
 
+int walk_page_range_vma(struct vm_area_struct *vma, unsigned long start,
+			unsigned long end, const struct mm_walk_ops *ops,
+			void *private)
+{
+	struct mm_walk walk = {
+		.ops		= ops,
+		.mm		= vma->vm_mm,
+		.vma		= vma,
+		.private	= private,
+	};
+
+	if (start >= end || !walk.mm)
+		return -EINVAL;
+	if (start < vma->vm_start || end > vma->vm_end)
+		return -EINVAL;
+
+	mmap_assert_locked(walk.mm);
+	return __walk_page_range(start, end, &walk);
+}
+
 int walk_page_vma(struct vm_area_struct *vma, const struct mm_walk_ops *ops,
 		void *private)
 {

[PATCH 6.1 54/72] ksm: use range-walk function to jump over holes in scan_get_next_rmap_item

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>

[ Upstream commit f5548c318d6520d4fa3c5ed6003eeb710763cbc5 ]

Currently, scan_get_next_rmap_item() walks every page address in a VMA to
locate mergeable pages.  This becomes highly inefficient when scanning
large virtual memory areas that contain mostly unmapped regions, causing
ksmd to use large amount of cpu without deduplicating much pages.

This patch replaces the per-address lookup with a range walk using
walk_page_range().  The range walker allows KSM to skip over entire
unmapped holes in a VMA, avoiding unnecessary lookups.  This problem was
previously discussed in [1].

Consider the following test program which creates a 32 TiB mapping in the
virtual address space but only populates a single page:

/* 32 TiB */
const size_t size = 32ul * 1024 * 1024 * 1024 * 1024;

int main() {
        char *area = mmap(NULL, size, PROT_READ | PROT_WRITE,
                          MAP_NORESERVE | MAP_PRIVATE | MAP_ANON, -1, 0);

        if (area == MAP_FAILED) {
                perror("mmap() failed\n");
                return -1;
        }

        /* Populate a single page such that we get an anon_vma. */
        *area = 0;

        /* Enable KSM. */
        madvise(area, size, MADV_MERGEABLE);
        pause();
        return 0;
}

$ ./ksm-sparse  &
$ echo 1 > /sys/kernel/mm/ksm/run

Without this patch ksmd uses 100% of the cpu for a long time (more then 1
hour in my test machine) scanning all the 32 TiB virtual address space
that contain only one mapped page.  This makes ksmd essentially deadlocked
not able to deduplicate anything of value.  With this patch ksmd walks
only the one mapped page and skips the rest of the 32 TiB virtual address
space, making the scan fast using little cpu.

Link: https://lkml.kernel.org/r/20251023035841.41406-1-pedrodemargomes@gmail.com
Link: https://lkml.kernel.org/r/20251022153059.22763-1-pedrodemargomes@gmail.com
Link: https://lore.kernel.org/linux-mm/423de7a3-1c62-4e72-8e79-19a6413e420c@redhat.com/ [1]
Fixes: 31dbd01f3143 ("ksm: Kernel SamePage Merging")
Signed-off-by: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: craftfever <craftfever@airmail.cc>
Closes: https://lkml.kernel.org/r/020cf8de6e773bb78ba7614ef250129f11a63781@murena.io
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ replace pmdp_get_lockless with pmd_read_atomic and pmdp_get with
 READ_ONCE(*pmdp) ]
Signed-off-by: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/ksm.c |  126 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 113 insertions(+), 13 deletions(-)

--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -39,6 +39,7 @@
 #include <linux/freezer.h>
 #include <linux/oom.h>
 #include <linux/numa.h>
+#include <linux/pagewalk.h>
 
 #include <asm/tlbflush.h>
 #include "internal.h"
@@ -2223,6 +2224,94 @@ static struct ksm_rmap_item *get_next_rm
 	return rmap_item;
 }
 
+struct ksm_next_page_arg {
+	struct folio *folio;
+	struct page *page;
+	unsigned long addr;
+};
+
+static int ksm_next_page_pmd_entry(pmd_t *pmdp, unsigned long addr, unsigned long end,
+		struct mm_walk *walk)
+{
+	struct ksm_next_page_arg *private = walk->private;
+	struct vm_area_struct *vma = walk->vma;
+	pte_t *start_ptep = NULL, *ptep, pte;
+	struct mm_struct *mm = walk->mm;
+	struct folio *folio;
+	struct page *page;
+	spinlock_t *ptl;
+	pmd_t pmd;
+
+	if (ksm_test_exit(mm))
+		return 0;
+
+	cond_resched();
+
+	pmd = pmd_read_atomic(pmdp);
+	if (!pmd_present(pmd))
+		return 0;
+
+	if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) && pmd_leaf(pmd)) {
+		ptl = pmd_lock(mm, pmdp);
+		pmd = READ_ONCE(*pmdp);
+
+		if (!pmd_present(pmd)) {
+			goto not_found_unlock;
+		} else if (pmd_leaf(pmd)) {
+			page = vm_normal_page_pmd(vma, addr, pmd);
+			if (!page)
+				goto not_found_unlock;
+			folio = page_folio(page);
+
+			if (folio_is_zone_device(folio) || !folio_test_anon(folio))
+				goto not_found_unlock;
+
+			page += ((addr & (PMD_SIZE - 1)) >> PAGE_SHIFT);
+			goto found_unlock;
+		}
+		spin_unlock(ptl);
+	}
+
+	start_ptep = pte_offset_map_lock(mm, pmdp, addr, &ptl);
+	if (!start_ptep)
+		return 0;
+
+	for (ptep = start_ptep; addr < end; ptep++, addr += PAGE_SIZE) {
+		pte = ptep_get(ptep);
+
+		if (!pte_present(pte))
+			continue;
+
+		page = vm_normal_page(vma, addr, pte);
+		if (!page)
+			continue;
+		folio = page_folio(page);
+
+		if (folio_is_zone_device(folio) || !folio_test_anon(folio))
+			continue;
+		goto found_unlock;
+	}
+
+not_found_unlock:
+	spin_unlock(ptl);
+	if (start_ptep)
+		pte_unmap(start_ptep);
+	return 0;
+found_unlock:
+	folio_get(folio);
+	spin_unlock(ptl);
+	if (start_ptep)
+		pte_unmap(start_ptep);
+	private->page = page;
+	private->folio = folio;
+	private->addr = addr;
+	return 1;
+}
+
+static struct mm_walk_ops ksm_next_page_ops = {
+	.pmd_entry = ksm_next_page_pmd_entry,
+};
+
 static struct ksm_rmap_item *scan_get_next_rmap_item(struct page **page)
 {
 	struct mm_struct *mm;
@@ -2307,32 +2396,43 @@ next_mm:
 			ksm_scan.address = vma->vm_end;
 
 		while (ksm_scan.address < vma->vm_end) {
+			struct ksm_next_page_arg ksm_next_page_arg;
+			struct page *tmp_page = NULL;
+			struct folio *folio;
+
 			if (ksm_test_exit(mm))
 				break;
-			*page = follow_page(vma, ksm_scan.address, FOLL_GET);
-			if (IS_ERR_OR_NULL(*page)) {
-				ksm_scan.address += PAGE_SIZE;
-				cond_resched();
-				continue;
+
+			int found;
+
+			found = walk_page_range_vma(vma, ksm_scan.address,
+						    vma->vm_end,
+						    &ksm_next_page_ops,
+						    &ksm_next_page_arg);
+
+			if (found > 0) {
+				folio = ksm_next_page_arg.folio;
+				tmp_page = ksm_next_page_arg.page;
+				ksm_scan.address = ksm_next_page_arg.addr;
+			} else {
+				VM_WARN_ON_ONCE(found < 0);
+				ksm_scan.address = vma->vm_end - PAGE_SIZE;
 			}
-			if (is_zone_device_page(*page))
-				goto next_page;
-			if (PageAnon(*page)) {
-				flush_anon_page(vma, *page, ksm_scan.address);
-				flush_dcache_page(*page);
+			if (tmp_page) {
+				flush_anon_page(vma, tmp_page, ksm_scan.address);
+				flush_dcache_page(tmp_page);
 				rmap_item = get_next_rmap_item(mm_slot,
 					ksm_scan.rmap_list, ksm_scan.address);
 				if (rmap_item) {
 					ksm_scan.rmap_list =
 							&rmap_item->rmap_list;
 					ksm_scan.address += PAGE_SIZE;
+					*page = tmp_page;
 				} else
-					put_page(*page);
+					folio_put(folio);
 				mmap_read_unlock(mm);
 				return rmap_item;
 			}
-next_page:
-			put_page(*page);
 			ksm_scan.address += PAGE_SIZE;
 			cond_resched();
 		}

[PATCH 6.1 55/72] ALSA: ac97bus: Use guard() for mutex locks

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit c07824a14d99c10edd4ec4c389d219af336ecf20 ]

Replace the manual mutex lock/unlock pairs with guard() for code
simplification.

Only code refactoring, and no behavior change.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250829151335.7342-18-tiwai@suse.de
Stable-dep-of: 830988b6cf19 ("ALSA: ac97: fix a double free in snd_ac97_controller_register()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/ac97/bus.c |   22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)

--- a/sound/ac97/bus.c
+++ b/sound/ac97/bus.c
@@ -242,10 +242,9 @@ static ssize_t cold_reset_store(struct d
 {
 	struct ac97_controller *ac97_ctrl;
 
-	mutex_lock(&ac97_controllers_mutex);
+	guard(mutex)(&ac97_controllers_mutex);
 	ac97_ctrl = to_ac97_controller(dev);
 	ac97_ctrl->ops->reset(ac97_ctrl);
-	mutex_unlock(&ac97_controllers_mutex);
 	return len;
 }
 static DEVICE_ATTR_WO(cold_reset);
@@ -259,10 +258,9 @@ static ssize_t warm_reset_store(struct d
 	if (!dev)
 		return -ENODEV;
 
-	mutex_lock(&ac97_controllers_mutex);
+	guard(mutex)(&ac97_controllers_mutex);
 	ac97_ctrl = to_ac97_controller(dev);
 	ac97_ctrl->ops->warm_reset(ac97_ctrl);
-	mutex_unlock(&ac97_controllers_mutex);
 	return len;
 }
 static DEVICE_ATTR_WO(warm_reset);
@@ -285,10 +283,10 @@ static const struct attribute_group *ac9
 
 static void ac97_del_adapter(struct ac97_controller *ac97_ctrl)
 {
-	mutex_lock(&ac97_controllers_mutex);
-	ac97_ctrl_codecs_unregister(ac97_ctrl);
-	list_del(&ac97_ctrl->controllers);
-	mutex_unlock(&ac97_controllers_mutex);
+	scoped_guard(mutex, &ac97_controllers_mutex) {
+		ac97_ctrl_codecs_unregister(ac97_ctrl);
+		list_del(&ac97_ctrl->controllers);
+	}
 
 	device_unregister(&ac97_ctrl->adap);
 }
@@ -312,7 +310,7 @@ static int ac97_add_adapter(struct ac97_
 {
 	int ret;
 
-	mutex_lock(&ac97_controllers_mutex);
+	guard(mutex)(&ac97_controllers_mutex);
 	ret = idr_alloc(&ac97_adapter_idr, ac97_ctrl, 0, 0, GFP_KERNEL);
 	ac97_ctrl->nr = ret;
 	if (ret >= 0) {
@@ -323,13 +321,11 @@ static int ac97_add_adapter(struct ac97_
 		if (ret)
 			put_device(&ac97_ctrl->adap);
 	}
-	if (!ret)
+	if (!ret) {
 		list_add(&ac97_ctrl->controllers, &ac97_controllers);
-	mutex_unlock(&ac97_controllers_mutex);
-
-	if (!ret)
 		dev_dbg(&ac97_ctrl->adap, "adapter registered by %s\n",
 			dev_name(ac97_ctrl->parent));
+	}
 	return ret;
 }
 

[PATCH 6.1 56/72] ALSA: ac97: fix a double free in snd_ac97_controller_register()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>

[ Upstream commit 830988b6cf197e6dcffdfe2008c5738e6c6c3c0f ]

If ac97_add_adapter() fails, put_device() is the correct way to drop
the device reference. kfree() is not required.
Add kfree() if idr_alloc() fails and in ac97_adapter_release() to do
the cleanup.

Found by code review.

Fixes: 74426fbff66e ("ALSA: ac97: add an ac97 bus")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Link: https://patch.msgid.link/20251219162845.657525-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/ac97/bus.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/sound/ac97/bus.c
+++ b/sound/ac97/bus.c
@@ -299,6 +299,7 @@ static void ac97_adapter_release(struct
 	idr_remove(&ac97_adapter_idr, ac97_ctrl->nr);
 	dev_dbg(&ac97_ctrl->adap, "adapter unregistered by %s\n",
 		dev_name(ac97_ctrl->parent));
+	kfree(ac97_ctrl);
 }
 
 static const struct device_type ac97_adapter_type = {
@@ -320,7 +321,9 @@ static int ac97_add_adapter(struct ac97_
 		ret = device_register(&ac97_ctrl->adap);
 		if (ret)
 			put_device(&ac97_ctrl->adap);
-	}
+	} else
+		kfree(ac97_ctrl);
+
 	if (!ret) {
 		list_add(&ac97_ctrl->controllers, &ac97_controllers);
 		dev_dbg(&ac97_ctrl->adap, "adapter registered by %s\n",
@@ -361,14 +364,11 @@ struct ac97_controller *snd_ac97_control
 	ret = ac97_add_adapter(ac97_ctrl);
 
 	if (ret)
-		goto err;
+		return ERR_PTR(ret);
 	ac97_bus_reset(ac97_ctrl);
 	ac97_bus_scan(ac97_ctrl);
 
 	return ac97_ctrl;
-err:
-	kfree(ac97_ctrl);
-	return ERR_PTR(ret);
 }
 EXPORT_SYMBOL_GPL(snd_ac97_controller_register);
 

[PATCH 6.1 57/72] nfsd: provide locking for v4_end_grace

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: NeilBrown <neil@brown.name>

[ Upstream commit 2857bd59feb63fcf40fe4baf55401baea6b4feb4 ]

Writing to v4_end_grace can race with server shutdown and result in
memory being accessed after it was freed - reclaim_str_hashtbl in
particularly.

We cannot hold nfsd_mutex across the nfsd4_end_grace() call as that is
held while client_tracking_op->init() is called and that can wait for
an upcall to nfsdcltrack which can write to v4_end_grace, resulting in a
deadlock.

nfsd4_end_grace() is also called by the landromat work queue and this
doesn't require locking as server shutdown will stop the work and wait
for it before freeing anything that nfsd4_end_grace() might access.

However, we must be sure that writing to v4_end_grace doesn't restart
the work item after shutdown has already waited for it.  For this we
add a new flag protected with nn->client_lock.  It is set only while it
is safe to make client tracking calls, and v4_end_grace only schedules
work while the flag is set with the spinlock held.

So this patch adds a nfsd_net field "client_tracking_active" which is
set as described.  Another field "grace_end_forced", is set when
v4_end_grace is written.  After this is set, and providing
client_tracking_active is set, the laundromat is scheduled.
This "grace_end_forced" field bypasses other checks for whether the
grace period has finished.

This resolves a race which can result in use-after-free.

Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Closes: https://lore.kernel.org/linux-nfs/20250623030015.2353515-1-neil@brown.name/T/#t
Fixes: 7f5ef2e900d9 ("nfsd: add a v4_end_grace file to /proc/fs/nfsd")
Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neil@brown.name>
Tested-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfsd/netns.h     |    2 ++
 fs/nfsd/nfs4state.c |   42 ++++++++++++++++++++++++++++++++++++++++--
 fs/nfsd/nfsctl.c    |    3 +--
 fs/nfsd/state.h     |    2 +-
 4 files changed, 44 insertions(+), 5 deletions(-)

--- a/fs/nfsd/netns.h
+++ b/fs/nfsd/netns.h
@@ -64,6 +64,8 @@ struct nfsd_net {
 
 	struct lock_manager nfsd4_manager;
 	bool grace_ended;
+	bool grace_end_forced;
+	bool client_tracking_active;
 	time64_t boot_time;
 
 	struct dentry *nfsd_client_dir;
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -84,7 +84,7 @@ static u64 current_sessionid = 1;
 /* forward declarations */
 static bool check_for_locks(struct nfs4_file *fp, struct nfs4_lockowner *lowner);
 static void nfs4_free_ol_stateid(struct nfs4_stid *stid);
-void nfsd4_end_grace(struct nfsd_net *nn);
+static void nfsd4_end_grace(struct nfsd_net *nn);
 static void _free_cpntf_state_locked(struct nfsd_net *nn, struct nfs4_cpntf_state *cps);
 static void nfsd4_file_hash_remove(struct nfs4_file *fi);
 
@@ -5882,7 +5882,7 @@ nfsd4_renew(struct svc_rqst *rqstp, stru
 	return nfs_ok;
 }
 
-void
+static void
 nfsd4_end_grace(struct nfsd_net *nn)
 {
 	/* do nothing if grace period already ended */
@@ -5915,6 +5915,33 @@ nfsd4_end_grace(struct nfsd_net *nn)
 	 */
 }
 
+/**
+ * nfsd4_force_end_grace - forcibly end the NFSv4 grace period
+ * @nn: network namespace for the server instance to be updated
+ *
+ * Forces bypass of normal grace period completion, then schedules
+ * the laundromat to end the grace period immediately. Does not wait
+ * for the grace period to fully terminate before returning.
+ *
+ * Return values:
+ *   %true: Grace termination schedule
+ *   %false: No action was taken
+ */
+bool nfsd4_force_end_grace(struct nfsd_net *nn)
+{
+	if (!nn->client_tracking_ops)
+		return false;
+	spin_lock(&nn->client_lock);
+	if (nn->grace_ended || !nn->client_tracking_active) {
+		spin_unlock(&nn->client_lock);
+		return false;
+	}
+	WRITE_ONCE(nn->grace_end_forced, true);
+	mod_delayed_work(laundry_wq, &nn->laundromat_work, 0);
+	spin_unlock(&nn->client_lock);
+	return true;
+}
+
 /*
  * If we've waited a lease period but there are still clients trying to
  * reclaim, wait a little longer to give them a chance to finish.
@@ -5924,6 +5951,8 @@ static bool clients_still_reclaiming(str
 	time64_t double_grace_period_end = nn->boot_time +
 					   2 * nn->nfsd4_lease;
 
+	if (READ_ONCE(nn->grace_end_forced))
+		return false;
 	if (nn->track_reclaim_completes &&
 			atomic_read(&nn->nr_reclaim_complete) ==
 			nn->reclaim_str_hashtbl_size)
@@ -8131,6 +8160,8 @@ static int nfs4_state_create_net(struct
 	nn->unconf_name_tree = RB_ROOT;
 	nn->boot_time = ktime_get_real_seconds();
 	nn->grace_ended = false;
+	nn->grace_end_forced = false;
+	nn->client_tracking_active = false;
 	nn->nfsd4_manager.block_opens = true;
 	INIT_LIST_HEAD(&nn->nfsd4_manager.list);
 	INIT_LIST_HEAD(&nn->client_lru);
@@ -8207,6 +8238,10 @@ nfs4_state_start_net(struct net *net)
 		return ret;
 	locks_start_grace(net, &nn->nfsd4_manager);
 	nfsd4_client_tracking_init(net);
+	/* safe for laundromat to run now */
+	spin_lock(&nn->client_lock);
+	nn->client_tracking_active = true;
+	spin_unlock(&nn->client_lock);
 	if (nn->track_reclaim_completes && nn->reclaim_str_hashtbl_size == 0)
 		goto skip_grace;
 	printk(KERN_INFO "NFSD: starting %lld-second grace period (net %x)\n",
@@ -8253,6 +8288,9 @@ nfs4_state_shutdown_net(struct net *net)
 
 	unregister_shrinker(&nn->nfsd_client_shrinker);
 	cancel_work_sync(&nn->nfsd_shrinker_work);
+	spin_lock(&nn->client_lock);
+	nn->client_tracking_active = false;
+	spin_unlock(&nn->client_lock);
 	cancel_delayed_work_sync(&nn->laundromat_work);
 	locks_end_grace(&nn->nfsd4_manager);
 
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -1117,9 +1117,8 @@ static ssize_t write_v4_end_grace(struct
 		case 'Y':
 		case 'y':
 		case '1':
-			if (!nn->nfsd_serv)
+			if (!nfsd4_force_end_grace(nn))
 				return -EBUSY;
-			nfsd4_end_grace(nn);
 			break;
 		default:
 			return -EINVAL;
--- a/fs/nfsd/state.h
+++ b/fs/nfsd/state.h
@@ -719,7 +719,7 @@ static inline void get_nfs4_file(struct
 struct nfsd_file *find_any_file(struct nfs4_file *f);
 
 /* grace period management */
-void nfsd4_end_grace(struct nfsd_net *nn);
+bool nfsd4_force_end_grace(struct nfsd_net *nn);
 
 /* nfs4recover operations */
 extern int nfsd4_client_tracking_init(struct net *net);

[PATCH 6.1 58/72] NFS: trace: show TIMEDOUT instead of 0x6e

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen Hanxiao <chenhx.fnst@fujitsu.com>

[ Upstream commit cef48236dfe55fa266d505e8a497963a7bc5ef2a ]

__nfs_revalidate_inode may return ETIMEDOUT.

print symbol of ETIMEDOUT in nfs trace:

before:
cat-5191 [005] 119.331127: nfs_revalidate_inode_exit: error=-110 (0x6e)

after:
cat-1738 [004] 44.365509: nfs_revalidate_inode_exit: error=-110 (TIMEDOUT)

Signed-off-by: Chen Hanxiao <chenhx.fnst@fujitsu.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: c6c209ceb87f ("NFSD: Remove NFSERR_EAGAIN")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/trace/misc/nfs.h |    1 +
 1 file changed, 1 insertion(+)

--- a/include/trace/misc/nfs.h
+++ b/include/trace/misc/nfs.h
@@ -52,6 +52,7 @@ TRACE_DEFINE_ENUM(NFSERR_JUKEBOX);
 		{ NFSERR_IO,			"IO" }, \
 		{ NFSERR_NXIO,			"NXIO" }, \
 		{ ECHILD,			"CHILD" }, \
+		{ ETIMEDOUT,			"TIMEDOUT" }, \
 		{ NFSERR_EAGAIN,		"AGAIN" }, \
 		{ NFSERR_ACCES,			"ACCES" }, \
 		{ NFSERR_EXIST,			"EXIST" }, \

[PATCH 6.1 59/72] nfs_common: factor out nfs_errtbl and nfs_stat_to_errno

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Snitzer <snitzer@kernel.org>

[ Upstream commit 4806ded4c14c5e8fdc6ce885d83221a78c06a428 ]

Common nfs_stat_to_errno() is used by both fs/nfs/nfs2xdr.c and
fs/nfs/nfs3xdr.c

Will also be used by fs/nfsd/localio.c

Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Stable-dep-of: c6c209ceb87f ("NFSD: Remove NFSERR_EAGAIN")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/Kconfig             |    1 
 fs/nfs/nfs2xdr.c           |   70 -----------------------------
 fs/nfs/nfs3xdr.c           |  108 ++++++++-------------------------------------
 fs/nfs/nfs4xdr.c           |    4 -
 fs/nfs_common/Makefile     |    2 
 fs/nfs_common/common.c     |   67 +++++++++++++++++++++++++++
 fs/nfsd/Kconfig            |    1 
 include/linux/nfs_common.h |   16 ++++++
 8 files changed, 109 insertions(+), 160 deletions(-)
 create mode 100644 fs/nfs_common/common.c
 create mode 100644 include/linux/nfs_common.h

--- a/fs/nfs/Kconfig
+++ b/fs/nfs/Kconfig
@@ -5,6 +5,7 @@ config NFS_FS
 	select CRC32
 	select LOCKD
 	select SUNRPC
+	select NFS_COMMON
 	select NFS_ACL_SUPPORT if NFS_V3_ACL
 	help
 	  Choose Y here if you want to access files residing on other
--- a/fs/nfs/nfs2xdr.c
+++ b/fs/nfs/nfs2xdr.c
@@ -22,14 +22,12 @@
 #include <linux/nfs.h>
 #include <linux/nfs2.h>
 #include <linux/nfs_fs.h>
+#include <linux/nfs_common.h>
 #include "nfstrace.h"
 #include "internal.h"
 
 #define NFSDBG_FACILITY		NFSDBG_XDR
 
-/* Mapping from NFS error code to "errno" error code. */
-#define errno_NFSERR_IO		EIO
-
 /*
  * Declare the space requirements for NFS arguments and replies as
  * number of 32bit-words
@@ -64,8 +62,6 @@
 #define NFS_readdirres_sz	(1+NFS_pagepad_sz)
 #define NFS_statfsres_sz	(1+NFS_info_sz)
 
-static int nfs_stat_to_errno(enum nfs_stat);
-
 /*
  * Encode/decode NFSv2 basic data types
  *
@@ -1054,70 +1050,6 @@ out_default:
 	return nfs_stat_to_errno(status);
 }
 
-
-/*
- * We need to translate between nfs status return values and
- * the local errno values which may not be the same.
- */
-static const struct {
-	int stat;
-	int errno;
-} nfs_errtbl[] = {
-	{ NFS_OK,		0		},
-	{ NFSERR_PERM,		-EPERM		},
-	{ NFSERR_NOENT,		-ENOENT		},
-	{ NFSERR_IO,		-errno_NFSERR_IO},
-	{ NFSERR_NXIO,		-ENXIO		},
-/*	{ NFSERR_EAGAIN,	-EAGAIN		}, */
-	{ NFSERR_ACCES,		-EACCES		},
-	{ NFSERR_EXIST,		-EEXIST		},
-	{ NFSERR_XDEV,		-EXDEV		},
-	{ NFSERR_NODEV,		-ENODEV		},
-	{ NFSERR_NOTDIR,	-ENOTDIR	},
-	{ NFSERR_ISDIR,		-EISDIR		},
-	{ NFSERR_INVAL,		-EINVAL		},
-	{ NFSERR_FBIG,		-EFBIG		},
-	{ NFSERR_NOSPC,		-ENOSPC		},
-	{ NFSERR_ROFS,		-EROFS		},
-	{ NFSERR_MLINK,		-EMLINK		},
-	{ NFSERR_NAMETOOLONG,	-ENAMETOOLONG	},
-	{ NFSERR_NOTEMPTY,	-ENOTEMPTY	},
-	{ NFSERR_DQUOT,		-EDQUOT		},
-	{ NFSERR_STALE,		-ESTALE		},
-	{ NFSERR_REMOTE,	-EREMOTE	},
-#ifdef EWFLUSH
-	{ NFSERR_WFLUSH,	-EWFLUSH	},
-#endif
-	{ NFSERR_BADHANDLE,	-EBADHANDLE	},
-	{ NFSERR_NOT_SYNC,	-ENOTSYNC	},
-	{ NFSERR_BAD_COOKIE,	-EBADCOOKIE	},
-	{ NFSERR_NOTSUPP,	-ENOTSUPP	},
-	{ NFSERR_TOOSMALL,	-ETOOSMALL	},
-	{ NFSERR_SERVERFAULT,	-EREMOTEIO	},
-	{ NFSERR_BADTYPE,	-EBADTYPE	},
-	{ NFSERR_JUKEBOX,	-EJUKEBOX	},
-	{ -1,			-EIO		}
-};
-
-/**
- * nfs_stat_to_errno - convert an NFS status code to a local errno
- * @status: NFS status code to convert
- *
- * Returns a local errno value, or -EIO if the NFS status code is
- * not recognized.  This function is used jointly by NFSv2 and NFSv3.
- */
-static int nfs_stat_to_errno(enum nfs_stat status)
-{
-	int i;
-
-	for (i = 0; nfs_errtbl[i].stat != -1; i++) {
-		if (nfs_errtbl[i].stat == (int)status)
-			return nfs_errtbl[i].errno;
-	}
-	dprintk("NFS: Unrecognized nfs status value: %u\n", status);
-	return nfs_errtbl[i].errno;
-}
-
 #define PROC(proc, argtype, restype, timer)				\
 [NFSPROC_##proc] = {							\
 	.p_proc	    =  NFSPROC_##proc,					\
--- a/fs/nfs/nfs3xdr.c
+++ b/fs/nfs/nfs3xdr.c
@@ -21,14 +21,13 @@
 #include <linux/nfs3.h>
 #include <linux/nfs_fs.h>
 #include <linux/nfsacl.h>
+#include <linux/nfs_common.h>
+
 #include "nfstrace.h"
 #include "internal.h"
 
 #define NFSDBG_FACILITY		NFSDBG_XDR
 
-/* Mapping from NFS error code to "errno" error code. */
-#define errno_NFSERR_IO		EIO
-
 /*
  * Declare the space requirements for NFS arguments and replies as
  * number of 32bit-words
@@ -91,8 +90,6 @@
 				NFS3_pagepad_sz)
 #define ACL3_setaclres_sz	(1+NFS3_post_op_attr_sz)
 
-static int nfs3_stat_to_errno(enum nfs_stat);
-
 /*
  * Map file type to S_IFMT bits
  */
@@ -1406,7 +1403,7 @@ static int nfs3_xdr_dec_getattr3res(stru
 out:
 	return error;
 out_default:
-	return nfs3_stat_to_errno(status);
+	return nfs_stat_to_errno(status);
 }
 
 /*
@@ -1445,7 +1442,7 @@ static int nfs3_xdr_dec_setattr3res(stru
 out:
 	return error;
 out_status:
-	return nfs3_stat_to_errno(status);
+	return nfs_stat_to_errno(status);
 }
 
 /*
@@ -1495,7 +1492,7 @@ out_default:
 	error = decode_post_op_attr(xdr, result->dir_attr, userns);
 	if (unlikely(error))
 		goto out;
-	return nfs3_stat_to_errno(status);
+	return nfs_stat_to_errno(status);
 }
 
 /*
@@ -1537,7 +1534,7 @@ static int nfs3_xdr_dec_access3res(struc
 out:
 	return error;
 out_default:
-	return nfs3_stat_to_errno(status);
+	return nfs_stat_to_errno(status);
 }
 
 /*
@@ -1578,7 +1575,7 @@ static int nfs3_xdr_dec_readlink3res(str
 out:
 	return error;
 out_default:
-	return nfs3_stat_to_errno(status);
+	return nfs_stat_to_errno(status);
 }
 
 /*
@@ -1658,7 +1655,7 @@ static int nfs3_xdr_dec_read3res(struct
 out:
 	return error;
 out_status:
-	return nfs3_stat_to_errno(status);
+	return nfs_stat_to_errno(status);
 }
 
 /*
@@ -1728,7 +1725,7 @@ static int nfs3_xdr_dec_write3res(struct
 out:
 	return error;
 out_status:
-	return nfs3_stat_to_errno(status);
+	return nfs_stat_to_errno(status);
 }
 
 /*
@@ -1795,7 +1792,7 @@ out_default:
 	error = decode_wcc_data(xdr, result->dir_attr, userns);
 	if (unlikely(error))
 		goto out;
-	return nfs3_stat_to_errno(status);
+	return nfs_stat_to_errno(status);
 }
 
 /*
@@ -1835,7 +1832,7 @@ static int nfs3_xdr_dec_remove3res(struc
 out:
 	return error;
 out_status:
-	return nfs3_stat_to_errno(status);
+	return nfs_stat_to_errno(status);
 }
 
 /*
@@ -1881,7 +1878,7 @@ static int nfs3_xdr_dec_rename3res(struc
 out:
 	return error;
 out_status:
-	return nfs3_stat_to_errno(status);
+	return nfs_stat_to_errno(status);
 }
 
 /*
@@ -1926,7 +1923,7 @@ static int nfs3_xdr_dec_link3res(struct
 out:
 	return error;
 out_status:
-	return nfs3_stat_to_errno(status);
+	return nfs_stat_to_errno(status);
 }
 
 /**
@@ -2101,7 +2098,7 @@ out_default:
 	error = decode_post_op_attr(xdr, result->dir_attr, rpc_rqst_userns(req));
 	if (unlikely(error))
 		goto out;
-	return nfs3_stat_to_errno(status);
+	return nfs_stat_to_errno(status);
 }
 
 /*
@@ -2167,7 +2164,7 @@ static int nfs3_xdr_dec_fsstat3res(struc
 out:
 	return error;
 out_status:
-	return nfs3_stat_to_errno(status);
+	return nfs_stat_to_errno(status);
 }
 
 /*
@@ -2243,7 +2240,7 @@ static int nfs3_xdr_dec_fsinfo3res(struc
 out:
 	return error;
 out_status:
-	return nfs3_stat_to_errno(status);
+	return nfs_stat_to_errno(status);
 }
 
 /*
@@ -2304,7 +2301,7 @@ static int nfs3_xdr_dec_pathconf3res(str
 out:
 	return error;
 out_status:
-	return nfs3_stat_to_errno(status);
+	return nfs_stat_to_errno(status);
 }
 
 /*
@@ -2350,7 +2347,7 @@ static int nfs3_xdr_dec_commit3res(struc
 out:
 	return error;
 out_status:
-	return nfs3_stat_to_errno(status);
+	return nfs_stat_to_errno(status);
 }
 
 #ifdef CONFIG_NFS_V3_ACL
@@ -2416,7 +2413,7 @@ static int nfs3_xdr_dec_getacl3res(struc
 out:
 	return error;
 out_default:
-	return nfs3_stat_to_errno(status);
+	return nfs_stat_to_errno(status);
 }
 
 static int nfs3_xdr_dec_setacl3res(struct rpc_rqst *req,
@@ -2435,76 +2432,11 @@ static int nfs3_xdr_dec_setacl3res(struc
 out:
 	return error;
 out_default:
-	return nfs3_stat_to_errno(status);
+	return nfs_stat_to_errno(status);
 }
 
 #endif  /* CONFIG_NFS_V3_ACL */
 
-
-/*
- * We need to translate between nfs status return values and
- * the local errno values which may not be the same.
- */
-static const struct {
-	int stat;
-	int errno;
-} nfs_errtbl[] = {
-	{ NFS_OK,		0		},
-	{ NFSERR_PERM,		-EPERM		},
-	{ NFSERR_NOENT,		-ENOENT		},
-	{ NFSERR_IO,		-errno_NFSERR_IO},
-	{ NFSERR_NXIO,		-ENXIO		},
-/*	{ NFSERR_EAGAIN,	-EAGAIN		}, */
-	{ NFSERR_ACCES,		-EACCES		},
-	{ NFSERR_EXIST,		-EEXIST		},
-	{ NFSERR_XDEV,		-EXDEV		},
-	{ NFSERR_NODEV,		-ENODEV		},
-	{ NFSERR_NOTDIR,	-ENOTDIR	},
-	{ NFSERR_ISDIR,		-EISDIR		},
-	{ NFSERR_INVAL,		-EINVAL		},
-	{ NFSERR_FBIG,		-EFBIG		},
-	{ NFSERR_NOSPC,		-ENOSPC		},
-	{ NFSERR_ROFS,		-EROFS		},
-	{ NFSERR_MLINK,		-EMLINK		},
-	{ NFSERR_NAMETOOLONG,	-ENAMETOOLONG	},
-	{ NFSERR_NOTEMPTY,	-ENOTEMPTY	},
-	{ NFSERR_DQUOT,		-EDQUOT		},
-	{ NFSERR_STALE,		-ESTALE		},
-	{ NFSERR_REMOTE,	-EREMOTE	},
-#ifdef EWFLUSH
-	{ NFSERR_WFLUSH,	-EWFLUSH	},
-#endif
-	{ NFSERR_BADHANDLE,	-EBADHANDLE	},
-	{ NFSERR_NOT_SYNC,	-ENOTSYNC	},
-	{ NFSERR_BAD_COOKIE,	-EBADCOOKIE	},
-	{ NFSERR_NOTSUPP,	-ENOTSUPP	},
-	{ NFSERR_TOOSMALL,	-ETOOSMALL	},
-	{ NFSERR_SERVERFAULT,	-EREMOTEIO	},
-	{ NFSERR_BADTYPE,	-EBADTYPE	},
-	{ NFSERR_JUKEBOX,	-EJUKEBOX	},
-	{ -1,			-EIO		}
-};
-
-/**
- * nfs3_stat_to_errno - convert an NFS status code to a local errno
- * @status: NFS status code to convert
- *
- * Returns a local errno value, or -EIO if the NFS status code is
- * not recognized.  This function is used jointly by NFSv2 and NFSv3.
- */
-static int nfs3_stat_to_errno(enum nfs_stat status)
-{
-	int i;
-
-	for (i = 0; nfs_errtbl[i].stat != -1; i++) {
-		if (nfs_errtbl[i].stat == (int)status)
-			return nfs_errtbl[i].errno;
-	}
-	dprintk("NFS: Unrecognized nfs status value: %u\n", status);
-	return nfs_errtbl[i].errno;
-}
-
-
 #define PROC(proc, argtype, restype, timer)				\
 [NFS3PROC_##proc] = {							\
 	.p_proc      = NFS3PROC_##proc,					\
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -52,6 +52,7 @@
 #include <linux/nfs.h>
 #include <linux/nfs4.h>
 #include <linux/nfs_fs.h>
+#include <linux/nfs_common.h>
 
 #include "nfs4_fs.h"
 #include "nfs4trace.h"
@@ -63,9 +64,6 @@
 
 #define NFSDBG_FACILITY		NFSDBG_XDR
 
-/* Mapping from NFS error code to "errno" error code. */
-#define errno_NFSERR_IO		EIO
-
 struct compound_hdr;
 static int nfs4_stat_to_errno(int);
 static void encode_layoutget(struct xdr_stream *xdr,
--- a/fs/nfs_common/Makefile
+++ b/fs/nfs_common/Makefile
@@ -8,3 +8,5 @@ nfs_acl-objs := nfsacl.o
 
 obj-$(CONFIG_GRACE_PERIOD) += grace.o
 obj-$(CONFIG_NFS_V4_2_SSC_HELPER) += nfs_ssc.o
+
+obj-$(CONFIG_NFS_COMMON) += common.o
--- /dev/null
+++ b/fs/nfs_common/common.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/module.h>
+#include <linux/nfs_common.h>
+
+/*
+ * We need to translate between nfs status return values and
+ * the local errno values which may not be the same.
+ */
+static const struct {
+	int stat;
+	int errno;
+} nfs_errtbl[] = {
+	{ NFS_OK,		0		},
+	{ NFSERR_PERM,		-EPERM		},
+	{ NFSERR_NOENT,		-ENOENT		},
+	{ NFSERR_IO,		-errno_NFSERR_IO},
+	{ NFSERR_NXIO,		-ENXIO		},
+/*	{ NFSERR_EAGAIN,	-EAGAIN		}, */
+	{ NFSERR_ACCES,		-EACCES		},
+	{ NFSERR_EXIST,		-EEXIST		},
+	{ NFSERR_XDEV,		-EXDEV		},
+	{ NFSERR_NODEV,		-ENODEV		},
+	{ NFSERR_NOTDIR,	-ENOTDIR	},
+	{ NFSERR_ISDIR,		-EISDIR		},
+	{ NFSERR_INVAL,		-EINVAL		},
+	{ NFSERR_FBIG,		-EFBIG		},
+	{ NFSERR_NOSPC,		-ENOSPC		},
+	{ NFSERR_ROFS,		-EROFS		},
+	{ NFSERR_MLINK,		-EMLINK		},
+	{ NFSERR_NAMETOOLONG,	-ENAMETOOLONG	},
+	{ NFSERR_NOTEMPTY,	-ENOTEMPTY	},
+	{ NFSERR_DQUOT,		-EDQUOT		},
+	{ NFSERR_STALE,		-ESTALE		},
+	{ NFSERR_REMOTE,	-EREMOTE	},
+#ifdef EWFLUSH
+	{ NFSERR_WFLUSH,	-EWFLUSH	},
+#endif
+	{ NFSERR_BADHANDLE,	-EBADHANDLE	},
+	{ NFSERR_NOT_SYNC,	-ENOTSYNC	},
+	{ NFSERR_BAD_COOKIE,	-EBADCOOKIE	},
+	{ NFSERR_NOTSUPP,	-ENOTSUPP	},
+	{ NFSERR_TOOSMALL,	-ETOOSMALL	},
+	{ NFSERR_SERVERFAULT,	-EREMOTEIO	},
+	{ NFSERR_BADTYPE,	-EBADTYPE	},
+	{ NFSERR_JUKEBOX,	-EJUKEBOX	},
+	{ -1,			-EIO		}
+};
+
+/**
+ * nfs_stat_to_errno - convert an NFS status code to a local errno
+ * @status: NFS status code to convert
+ *
+ * Returns a local errno value, or -EIO if the NFS status code is
+ * not recognized.  This function is used jointly by NFSv2 and NFSv3.
+ */
+int nfs_stat_to_errno(enum nfs_stat status)
+{
+	int i;
+
+	for (i = 0; nfs_errtbl[i].stat != -1; i++) {
+		if (nfs_errtbl[i].stat == (int)status)
+			return nfs_errtbl[i].errno;
+	}
+	return nfs_errtbl[i].errno;
+}
+EXPORT_SYMBOL_GPL(nfs_stat_to_errno);
--- a/fs/nfsd/Kconfig
+++ b/fs/nfsd/Kconfig
@@ -8,6 +8,7 @@ config NFSD
 	select LOCKD
 	select SUNRPC
 	select EXPORTFS
+	select NFS_COMMON
 	select NFS_ACL_SUPPORT if NFSD_V2_ACL
 	select NFS_ACL_SUPPORT if NFSD_V3_ACL
 	depends on MULTIUSER
--- /dev/null
+++ b/include/linux/nfs_common.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This file contains constants and methods used by both NFS client and server.
+ */
+#ifndef _LINUX_NFS_COMMON_H
+#define _LINUX_NFS_COMMON_H
+
+#include <linux/errno.h>
+#include <uapi/linux/nfs.h>
+
+/* Mapping from NFS error code to "errno" error code. */
+#define errno_NFSERR_IO EIO
+
+int nfs_stat_to_errno(enum nfs_stat status);
+
+#endif /* _LINUX_NFS_COMMON_H */

[PATCH 6.1 60/72] NFSD: Remove NFSERR_EAGAIN

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit c6c209ceb87f64a6ceebe61761951dcbbf4a0baa ]

I haven't found an NFSERR_EAGAIN in RFCs 1094, 1813, 7530, or 8881.
None of these RFCs have an NFS status code that match the numeric
value "11".

Based on the meaning of the EAGAIN errno, I presume the use of this
status in NFSD means NFS4ERR_DELAY. So replace the one usage of
nfserr_eagain, and remove it from NFSD's NFS status conversion
tables.

As far as I can tell, NFSERR_EAGAIN has existed since the pre-git
era, but was not actually used by any code until commit f4e44b393389
("NFSD: delay unmount source's export after inter-server copy
completed."), at which time it become possible for NFSD to return
a status code of 11 (which is not valid NFS protocol).

Fixes: f4e44b393389 ("NFSD: delay unmount source's export after inter-server copy completed.")
Cc: stable@vger.kernel.org
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs_common/common.c   |    1 -
 fs/nfsd/nfs4proc.c       |    2 +-
 fs/nfsd/nfsd.h           |    1 -
 include/trace/misc/nfs.h |    2 --
 include/uapi/linux/nfs.h |    1 -
 5 files changed, 1 insertion(+), 6 deletions(-)

--- a/fs/nfs_common/common.c
+++ b/fs/nfs_common/common.c
@@ -16,7 +16,6 @@ static const struct {
 	{ NFSERR_NOENT,		-ENOENT		},
 	{ NFSERR_IO,		-errno_NFSERR_IO},
 	{ NFSERR_NXIO,		-ENXIO		},
-/*	{ NFSERR_EAGAIN,	-EAGAIN		}, */
 	{ NFSERR_ACCES,		-EACCES		},
 	{ NFSERR_EXIST,		-EEXIST		},
 	{ NFSERR_XDEV,		-EXDEV		},
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -1321,7 +1321,7 @@ try_again:
 					(schedule_timeout(20*HZ) == 0)) {
 				finish_wait(&nn->nfsd_ssc_waitq, &wait);
 				kfree(work);
-				return nfserr_eagain;
+				return nfserr_jukebox;
 			}
 			finish_wait(&nn->nfsd_ssc_waitq, &wait);
 			goto try_again;
--- a/fs/nfsd/nfsd.h
+++ b/fs/nfsd/nfsd.h
@@ -201,7 +201,6 @@ void		nfsd_lockd_shutdown(void);
 #define	nfserr_noent		cpu_to_be32(NFSERR_NOENT)
 #define	nfserr_io		cpu_to_be32(NFSERR_IO)
 #define	nfserr_nxio		cpu_to_be32(NFSERR_NXIO)
-#define	nfserr_eagain		cpu_to_be32(NFSERR_EAGAIN)
 #define	nfserr_acces		cpu_to_be32(NFSERR_ACCES)
 #define	nfserr_exist		cpu_to_be32(NFSERR_EXIST)
 #define	nfserr_xdev		cpu_to_be32(NFSERR_XDEV)
--- a/include/trace/misc/nfs.h
+++ b/include/trace/misc/nfs.h
@@ -16,7 +16,6 @@ TRACE_DEFINE_ENUM(NFSERR_PERM);
 TRACE_DEFINE_ENUM(NFSERR_NOENT);
 TRACE_DEFINE_ENUM(NFSERR_IO);
 TRACE_DEFINE_ENUM(NFSERR_NXIO);
-TRACE_DEFINE_ENUM(NFSERR_EAGAIN);
 TRACE_DEFINE_ENUM(NFSERR_ACCES);
 TRACE_DEFINE_ENUM(NFSERR_EXIST);
 TRACE_DEFINE_ENUM(NFSERR_XDEV);
@@ -53,7 +52,6 @@ TRACE_DEFINE_ENUM(NFSERR_JUKEBOX);
 		{ NFSERR_NXIO,			"NXIO" }, \
 		{ ECHILD,			"CHILD" }, \
 		{ ETIMEDOUT,			"TIMEDOUT" }, \
-		{ NFSERR_EAGAIN,		"AGAIN" }, \
 		{ NFSERR_ACCES,			"ACCES" }, \
 		{ NFSERR_EXIST,			"EXIST" }, \
 		{ NFSERR_XDEV,			"XDEV" }, \
--- a/include/uapi/linux/nfs.h
+++ b/include/uapi/linux/nfs.h
@@ -49,7 +49,6 @@
 	NFSERR_NOENT = 2,		/* v2 v3 v4 */
 	NFSERR_IO = 5,			/* v2 v3 v4 */
 	NFSERR_NXIO = 6,		/* v2 v3 v4 */
-	NFSERR_EAGAIN = 11,		/* v2 v3 */
 	NFSERR_ACCES = 13,		/* v2 v3 v4 */
 	NFSERR_EXIST = 17,		/* v2 v3 v4 */
 	NFSERR_XDEV = 18,		/*    v3 v4 */

[PATCH 6.1 61/72] bpf: Fix an issue in bpf_prog_test_run_xdp when page size greater than 4K

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yonghong Song <yonghong.song@linux.dev>

[ Upstream commit 4fc012daf9c074772421c904357abf586336b1ca ]

The bpf selftest xdp_adjust_tail/xdp_adjust_frags_tail_grow failed on
arm64 with 64KB page:
   xdp_adjust_tail/xdp_adjust_frags_tail_grow:FAIL

In bpf_prog_test_run_xdp(), the xdp->frame_sz is set to 4K, but later on
when constructing frags, with 64K page size, the frag data_len could
be more than 4K. This will cause problems in bpf_xdp_frags_increase_tail().

To fix the failure, the xdp->frame_sz is set to be PAGE_SIZE so kernel
can test different page size properly. With the kernel change, the user
space and bpf prog needs adjustment. Currently, the MAX_SKB_FRAGS default
value is 17, so for 4K page, the maximum packet size will be less than 68K.
To test 64K page, a bigger maximum packet size than 68K is desired. So two
different functions are implemented for subtest xdp_adjust_frags_tail_grow.
Depending on different page size, different data input/output sizes are used
to adapt with different page size.

Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250612035032.2207498-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: e558cca21779 ("bpf, test_run: Subtract size of xdp_frame from allowed metadata size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bpf/test_run.c                            |  2 +-
 .../bpf/prog_tests/xdp_adjust_tail.c          | 96 +++++++++++++++++--
 .../bpf/progs/test_xdp_adjust_tail_grow.c     |  8 +-
 3 files changed, 97 insertions(+), 9 deletions(-)

diff --git a/net/bpf/test_run.c b/net/bpf/test_run.c
index 77b386b76d463..939bd0d866aba 100644
--- a/net/bpf/test_run.c
+++ b/net/bpf/test_run.c
@@ -1322,7 +1322,7 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
 		headroom -= ctx->data;
 	}
 
-	max_data_sz = 4096 - headroom - tailroom;
+	max_data_sz = PAGE_SIZE - headroom - tailroom;
 	if (size > max_data_sz) {
 		/* disallow live data mode for jumbo frames */
 		if (do_live)
diff --git a/tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c b/tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c
index 89366913a251c..df907798d59d3 100644
--- a/tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c
+++ b/tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c
@@ -37,21 +37,26 @@ static void test_xdp_adjust_tail_shrink(void)
 	bpf_object__close(obj);
 }
 
-static void test_xdp_adjust_tail_grow(void)
+static void test_xdp_adjust_tail_grow(bool is_64k_pagesize)
 {
 	const char *file = "./test_xdp_adjust_tail_grow.bpf.o";
 	struct bpf_object *obj;
-	char buf[4096]; /* avoid segfault: large buf to hold grow results */
+	char buf[8192]; /* avoid segfault: large buf to hold grow results */
 	__u32 expect_sz;
 	int err, prog_fd;
 	LIBBPF_OPTS(bpf_test_run_opts, topts,
 		.data_in = &pkt_v4,
-		.data_size_in = sizeof(pkt_v4),
 		.data_out = buf,
 		.data_size_out = sizeof(buf),
 		.repeat = 1,
 	);
 
+	/* topts.data_size_in as a special signal to bpf prog */
+	if (is_64k_pagesize)
+		topts.data_size_in = sizeof(pkt_v4) - 1;
+	else
+		topts.data_size_in = sizeof(pkt_v4);
+
 	err = bpf_prog_test_load(file, BPF_PROG_TYPE_XDP, &obj, &prog_fd);
 	if (!ASSERT_OK(err, "test_xdp_adjust_tail_grow"))
 		return;
@@ -201,7 +206,7 @@ static void test_xdp_adjust_frags_tail_shrink(void)
 	bpf_object__close(obj);
 }
 
-static void test_xdp_adjust_frags_tail_grow(void)
+static void test_xdp_adjust_frags_tail_grow_4k(void)
 {
 	const char *file = "./test_xdp_adjust_tail_grow.bpf.o";
 	__u32 exp_size;
@@ -266,16 +271,93 @@ static void test_xdp_adjust_frags_tail_grow(void)
 	bpf_object__close(obj);
 }
 
+static void test_xdp_adjust_frags_tail_grow_64k(void)
+{
+	const char *file = "./test_xdp_adjust_tail_grow.bpf.o";
+	__u32 exp_size;
+	struct bpf_program *prog;
+	struct bpf_object *obj;
+	int err, i, prog_fd;
+	__u8 *buf;
+	LIBBPF_OPTS(bpf_test_run_opts, topts);
+
+	obj = bpf_object__open(file);
+	if (libbpf_get_error(obj))
+		return;
+
+	prog = bpf_object__next_program(obj, NULL);
+	if (bpf_object__load(obj))
+		goto out;
+
+	prog_fd = bpf_program__fd(prog);
+
+	buf = malloc(262144);
+	if (!ASSERT_OK_PTR(buf, "alloc buf 256Kb"))
+		goto out;
+
+	/* Test case add 10 bytes to last frag */
+	memset(buf, 1, 262144);
+	exp_size = 90000 + 10;
+
+	topts.data_in = buf;
+	topts.data_out = buf;
+	topts.data_size_in = 90000;
+	topts.data_size_out = 262144;
+	err = bpf_prog_test_run_opts(prog_fd, &topts);
+
+	ASSERT_OK(err, "90Kb+10b");
+	ASSERT_EQ(topts.retval, XDP_TX, "90Kb+10b retval");
+	ASSERT_EQ(topts.data_size_out, exp_size, "90Kb+10b size");
+
+	for (i = 0; i < 90000; i++) {
+		if (buf[i] != 1)
+			ASSERT_EQ(buf[i], 1, "90Kb+10b-old");
+	}
+
+	for (i = 90000; i < 90010; i++) {
+		if (buf[i] != 0)
+			ASSERT_EQ(buf[i], 0, "90Kb+10b-new");
+	}
+
+	for (i = 90010; i < 262144; i++) {
+		if (buf[i] != 1)
+			ASSERT_EQ(buf[i], 1, "90Kb+10b-untouched");
+	}
+
+	/* Test a too large grow */
+	memset(buf, 1, 262144);
+	exp_size = 90001;
+
+	topts.data_in = topts.data_out = buf;
+	topts.data_size_in = 90001;
+	topts.data_size_out = 262144;
+	err = bpf_prog_test_run_opts(prog_fd, &topts);
+
+	ASSERT_OK(err, "90Kb+10b");
+	ASSERT_EQ(topts.retval, XDP_DROP, "90Kb+10b retval");
+	ASSERT_EQ(topts.data_size_out, exp_size, "90Kb+10b size");
+
+	free(buf);
+out:
+	bpf_object__close(obj);
+}
+
 void test_xdp_adjust_tail(void)
 {
+	int page_size = getpagesize();
+
 	if (test__start_subtest("xdp_adjust_tail_shrink"))
 		test_xdp_adjust_tail_shrink();
 	if (test__start_subtest("xdp_adjust_tail_grow"))
-		test_xdp_adjust_tail_grow();
+		test_xdp_adjust_tail_grow(page_size == 65536);
 	if (test__start_subtest("xdp_adjust_tail_grow2"))
 		test_xdp_adjust_tail_grow2();
 	if (test__start_subtest("xdp_adjust_frags_tail_shrink"))
 		test_xdp_adjust_frags_tail_shrink();
-	if (test__start_subtest("xdp_adjust_frags_tail_grow"))
-		test_xdp_adjust_frags_tail_grow();
+	if (test__start_subtest("xdp_adjust_frags_tail_grow")) {
+		if (page_size == 65536)
+			test_xdp_adjust_frags_tail_grow_64k();
+		else
+			test_xdp_adjust_frags_tail_grow_4k();
+	}
 }
diff --git a/tools/testing/selftests/bpf/progs/test_xdp_adjust_tail_grow.c b/tools/testing/selftests/bpf/progs/test_xdp_adjust_tail_grow.c
index 53b64c9994500..706a8d4c6e2ca 100644
--- a/tools/testing/selftests/bpf/progs/test_xdp_adjust_tail_grow.c
+++ b/tools/testing/selftests/bpf/progs/test_xdp_adjust_tail_grow.c
@@ -13,7 +13,9 @@ int _xdp_adjust_tail_grow(struct xdp_md *xdp)
 	/* Data length determine test case */
 
 	if (data_len == 54) { /* sizeof(pkt_v4) */
-		offset = 4096; /* test too large offset */
+		offset = 4096; /* test too large offset, 4k page size */
+	} else if (data_len == 53) { /* sizeof(pkt_v4) - 1 */
+		offset = 65536; /* test too large offset, 64k page size */
 	} else if (data_len == 74) { /* sizeof(pkt_v6) */
 		offset = 40;
 	} else if (data_len == 64) {
@@ -25,6 +27,10 @@ int _xdp_adjust_tail_grow(struct xdp_md *xdp)
 		offset = 10;
 	} else if (data_len == 9001) {
 		offset = 4096;
+	} else if (data_len == 90000) {
+		offset = 10; /* test a small offset, 64k page size */
+	} else if (data_len == 90001) {
+		offset = 65536; /* test too large offset, 64k page size */
 	} else {
 		return XDP_ABORTED; /* No matching test */
 	}
-- 
2.51.0

[PATCH 6.1 62/72] bpf: Make variables in bpf_prog_test_run_xdp less confusing

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Amery Hung <ameryhung@gmail.com>

[ Upstream commit 7eb83bff02ad5e82e8c456c58717ef181c220870 ]

Change the variable naming in bpf_prog_test_run_xdp() to make the
overall logic less confusing. As different modes were added to the
function over the time, some variables got overloaded, making
it hard to understand and changing the code becomes error-prone.

Replace "size" with "linear_sz" where it refers to the size of metadata
and data. If "size" refers to input data size, use test.data_size_in
directly.

Replace "max_data_sz" with "max_linear_sz" to better reflect the fact
that it is the maximum size of metadata and data (i.e., linear_sz). Also,
xdp_rxq.frags_size is always PAGE_SIZE, so just set it directly instead
of subtracting headroom and tailroom and adding them back.

Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250922233356.3356453-6-ameryhung@gmail.com
Stable-dep-of: e558cca21779 ("bpf, test_run: Subtract size of xdp_frame from allowed metadata size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bpf/test_run.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/net/bpf/test_run.c b/net/bpf/test_run.c
index 939bd0d866aba..397736cc2d786 100644
--- a/net/bpf/test_run.c
+++ b/net/bpf/test_run.c
@@ -1277,9 +1277,9 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
 {
 	bool do_live = (kattr->test.flags & BPF_F_TEST_XDP_LIVE_FRAMES);
 	u32 tailroom = SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
+	u32 retval = 0, duration, max_linear_sz, size;
+	u32 linear_sz = kattr->test.data_size_in;
 	u32 batch_size = kattr->test.batch_size;
-	u32 retval = 0, duration, max_data_sz;
-	u32 size = kattr->test.data_size_in;
 	u32 headroom = XDP_PACKET_HEADROOM;
 	u32 repeat = kattr->test.repeat;
 	struct netdev_rx_queue *rxqueue;
@@ -1313,7 +1313,7 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
 
 	if (ctx) {
 		/* There can't be user provided data before the meta data */
-		if (ctx->data_meta || ctx->data_end != size ||
+		if (ctx->data_meta || ctx->data_end != kattr->test.data_size_in ||
 		    ctx->data > ctx->data_end ||
 		    unlikely(xdp_metalen_invalid(ctx->data)) ||
 		    (do_live && (kattr->test.data_out || kattr->test.ctx_out)))
@@ -1322,30 +1322,30 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
 		headroom -= ctx->data;
 	}
 
-	max_data_sz = PAGE_SIZE - headroom - tailroom;
-	if (size > max_data_sz) {
-		/* disallow live data mode for jumbo frames */
-		if (do_live)
-			goto free_ctx;
-		size = max_data_sz;
-	}
+	max_linear_sz = PAGE_SIZE - headroom - tailroom;
+	linear_sz = min_t(u32, linear_sz, max_linear_sz);
+
+	/* disallow live data mode for jumbo frames */
+	if (do_live && kattr->test.data_size_in > linear_sz)
+		goto free_ctx;
 
-	data = bpf_test_init(kattr, size, max_data_sz, headroom, tailroom);
+	data = bpf_test_init(kattr, linear_sz, max_linear_sz, headroom, tailroom);
 	if (IS_ERR(data)) {
 		ret = PTR_ERR(data);
 		goto free_ctx;
 	}
 
 	rxqueue = __netif_get_rx_queue(current->nsproxy->net_ns->loopback_dev, 0);
-	rxqueue->xdp_rxq.frag_size = headroom + max_data_sz + tailroom;
+	rxqueue->xdp_rxq.frag_size = PAGE_SIZE;
 	xdp_init_buff(&xdp, rxqueue->xdp_rxq.frag_size, &rxqueue->xdp_rxq);
-	xdp_prepare_buff(&xdp, data, headroom, size, true);
+	xdp_prepare_buff(&xdp, data, headroom, linear_sz, true);
 	sinfo = xdp_get_shared_info_from_buff(&xdp);
 
 	ret = xdp_convert_md_to_buff(ctx, &xdp);
 	if (ret)
 		goto free_data;
 
+	size = linear_sz;
 	if (unlikely(kattr->test.data_size_in > size)) {
 		void __user *data_in = u64_to_user_ptr(kattr->test.data_in);
 
-- 
2.51.0

[PATCH 6.1 63/72] bpf: Support specifying linear xdp packet data size for BPF_PROG_TEST_RUN

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Amery Hung <ameryhung@gmail.com>

[ Upstream commit fe9544ed1a2e9217b2c5285c3a4ac0dc5a38bd7b ]

To test bpf_xdp_pull_data(), an xdp packet containing fragments as well
as free linear data area after xdp->data_end needs to be created.
However, bpf_prog_test_run_xdp() always fills the linear area with
data_in before creating fragments, leaving no space to pull data. This
patch will allow users to specify the linear data size through
ctx->data_end.

Currently, ctx_in->data_end must match data_size_in and will not be the
final ctx->data_end seen by xdp programs. This is because ctx->data_end
is populated according to the xdp_buff passed to test_run. The linear
data area available in an xdp_buff, max_linear_sz, is alawys filled up
before copying data_in into fragments.

This patch will allow users to specify the size of data that goes into
the linear area. When ctx_in->data_end is different from data_size_in,
only ctx_in->data_end bytes of data will be put into the linear area when
creating the xdp_buff.

While ctx_in->data_end will be allowed to be different from data_size_in,
it cannot be larger than the data_size_in as there will be no data to
copy from user space. If it is larger than the maximum linear data area
size, the layout suggested by the user will not be honored. Data beyond
max_linear_sz bytes will still be copied into fragments.

Finally, since it is possible for a NIC to produce a xdp_buff with empty
linear data area, allow it when calling bpf_test_init() from
bpf_prog_test_run_xdp() so that we can test XDP kfuncs with such
xdp_buff. This is done by moving lower-bound check to callers as most of
them already do except bpf_prog_test_run_skb(). The change also fixes a
bug that allows passing an xdp_buff with data < ETH_HLEN. This can
happen when ctx is used and metadata is at least ETH_HLEN.

Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250922233356.3356453-7-ameryhung@gmail.com
Stable-dep-of: e558cca21779 ("bpf, test_run: Subtract size of xdp_frame from allowed metadata size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bpf/test_run.c                                | 15 ++++++++++++---
 .../bpf/prog_tests/xdp_context_test_run.c         |  4 +---
 2 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/net/bpf/test_run.c b/net/bpf/test_run.c
index 397736cc2d786..2bc83525986f3 100644
--- a/net/bpf/test_run.c
+++ b/net/bpf/test_run.c
@@ -768,7 +768,7 @@ static void *bpf_test_init(const union bpf_attr *kattr, u32 user_size,
 	void __user *data_in = u64_to_user_ptr(kattr->test.data_in);
 	void *data;
 
-	if (user_size < ETH_HLEN || user_size > PAGE_SIZE - headroom - tailroom)
+	if (user_size > PAGE_SIZE - headroom - tailroom)
 		return ERR_PTR(-EINVAL);
 
 	size = SKB_DATA_ALIGN(size);
@@ -1097,6 +1097,9 @@ int bpf_prog_test_run_skb(struct bpf_prog *prog, const union bpf_attr *kattr,
 	if (kattr->test.flags || kattr->test.cpu || kattr->test.batch_size)
 		return -EINVAL;
 
+	if (size < ETH_HLEN)
+		return -EINVAL;
+
 	data = bpf_test_init(kattr, kattr->test.data_size_in,
 			     size, NET_SKB_PAD + NET_IP_ALIGN,
 			     SKB_DATA_ALIGN(sizeof(struct skb_shared_info)));
@@ -1277,7 +1280,7 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
 {
 	bool do_live = (kattr->test.flags & BPF_F_TEST_XDP_LIVE_FRAMES);
 	u32 tailroom = SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
-	u32 retval = 0, duration, max_linear_sz, size;
+	u32 retval = 0, meta_sz = 0, duration, max_linear_sz, size;
 	u32 linear_sz = kattr->test.data_size_in;
 	u32 batch_size = kattr->test.batch_size;
 	u32 headroom = XDP_PACKET_HEADROOM;
@@ -1313,13 +1316,16 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
 
 	if (ctx) {
 		/* There can't be user provided data before the meta data */
-		if (ctx->data_meta || ctx->data_end != kattr->test.data_size_in ||
+		if (ctx->data_meta || ctx->data_end > kattr->test.data_size_in ||
 		    ctx->data > ctx->data_end ||
 		    unlikely(xdp_metalen_invalid(ctx->data)) ||
 		    (do_live && (kattr->test.data_out || kattr->test.ctx_out)))
 			goto free_ctx;
 		/* Meta data is allocated from the headroom */
 		headroom -= ctx->data;
+
+		meta_sz = ctx->data;
+		linear_sz = ctx->data_end;
 	}
 
 	max_linear_sz = PAGE_SIZE - headroom - tailroom;
@@ -1329,6 +1335,9 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
 	if (do_live && kattr->test.data_size_in > linear_sz)
 		goto free_ctx;
 
+	if (kattr->test.data_size_in - meta_sz < ETH_HLEN)
+		return -EINVAL;
+
 	data = bpf_test_init(kattr, linear_sz, max_linear_sz, headroom, tailroom);
 	if (IS_ERR(data)) {
 		ret = PTR_ERR(data);
diff --git a/tools/testing/selftests/bpf/prog_tests/xdp_context_test_run.c b/tools/testing/selftests/bpf/prog_tests/xdp_context_test_run.c
index ab4952b9fb1d4..eab8625aad3b6 100644
--- a/tools/testing/selftests/bpf/prog_tests/xdp_context_test_run.c
+++ b/tools/testing/selftests/bpf/prog_tests/xdp_context_test_run.c
@@ -80,9 +80,7 @@ void test_xdp_context_test_run(void)
 	/* Meta data must be 32 bytes or smaller */
 	test_xdp_context_error(prog_fd, opts, 0, 36, sizeof(data), 0, 0, 0);
 
-	/* Total size of data must match data_end - data_meta */
-	test_xdp_context_error(prog_fd, opts, 0, sizeof(__u32),
-			       sizeof(data) - 1, 0, 0, 0);
+	/* Total size of data must be data_end - data_meta or larger */
 	test_xdp_context_error(prog_fd, opts, 0, sizeof(__u32),
 			       sizeof(data) + 1, 0, 0, 0);
 
-- 
2.51.0

[PATCH 6.1 64/72] bpf, test_run: Subtract size of xdp_frame from allowed metadata size

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit e558cca217790286e799a8baacd1610bda31b261 ]

The xdp_frame structure takes up part of the XDP frame headroom,
limiting the size of the metadata. However, in bpf_test_run, we don't
take this into account, which makes it possible for userspace to supply
a metadata size that is too large (taking up the entire headroom).

If userspace supplies such a large metadata size in live packet mode,
the xdp_update_frame_from_buff() call in xdp_test_run_init_page() call
will fail, after which packet transmission proceeds with an
uninitialised frame structure, leading to the usual Bad Stuff.

The commit in the Fixes tag fixed a related bug where the second check
in xdp_update_frame_from_buff() could fail, but did not add any
additional constraints on the metadata size. Complete the fix by adding
an additional check on the metadata size. Reorder the checks slightly to
make the logic clearer and add a comment.

Link: https://lore.kernel.org/r/fa2be179-bad7-4ee3-8668-4903d1853461@hust.edu.cn
Fixes: b6f1f780b393 ("bpf, test_run: Fix packet size check for live packet mode")
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260105114747.1358750-1-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bpf/test_run.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/net/bpf/test_run.c b/net/bpf/test_run.c
index 2bc83525986f3..88fdcfb2fdd30 100644
--- a/net/bpf/test_run.c
+++ b/net/bpf/test_run.c
@@ -1304,8 +1304,6 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
 			batch_size = NAPI_POLL_WEIGHT;
 		else if (batch_size > TEST_XDP_MAX_BATCH)
 			return -E2BIG;
-
-		headroom += sizeof(struct xdp_page_head);
 	} else if (batch_size) {
 		return -EINVAL;
 	}
@@ -1318,16 +1316,26 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
 		/* There can't be user provided data before the meta data */
 		if (ctx->data_meta || ctx->data_end > kattr->test.data_size_in ||
 		    ctx->data > ctx->data_end ||
-		    unlikely(xdp_metalen_invalid(ctx->data)) ||
 		    (do_live && (kattr->test.data_out || kattr->test.ctx_out)))
 			goto free_ctx;
-		/* Meta data is allocated from the headroom */
-		headroom -= ctx->data;
 
 		meta_sz = ctx->data;
+		if (xdp_metalen_invalid(meta_sz) || meta_sz > headroom - sizeof(struct xdp_frame))
+			goto free_ctx;
+
+		/* Meta data is allocated from the headroom */
+		headroom -= meta_sz;
 		linear_sz = ctx->data_end;
 	}
 
+	/* The xdp_page_head structure takes up space in each page, limiting the
+         * size of the packet data; add the extra size to headroom here to make
+         * sure it's accounted in the length checks below, but not in the
+         * metadata size check above.
+         */
+        if (do_live)
+		headroom += sizeof(struct xdp_page_head);
+
 	max_linear_sz = PAGE_SIZE - headroom - tailroom;
 	linear_sz = min_t(u32, linear_sz, max_linear_sz);
 
-- 
2.51.0

[PATCH 6.1 65/72] bpf: Fix reference count leak in bpf_prog_test_run_xdp()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

[ Upstream commit ec69daabe45256f98ac86c651b8ad1b2574489a7 ]

syzbot is reporting

  unregister_netdevice: waiting for sit0 to become free. Usage count = 2

problem. A debug printk() patch found that a refcount is obtained at
xdp_convert_md_to_buff() from bpf_prog_test_run_xdp().

According to commit ec94670fcb3b ("bpf: Support specifying ingress via
xdp_md context in BPF_PROG_TEST_RUN"), the refcount obtained by
xdp_convert_md_to_buff() will be released by xdp_convert_buff_to_md().

Therefore, we can consider that the error handling path introduced by
commit 1c1949982524 ("bpf: introduce frags support to
bpf_prog_test_run_xdp()") forgot to call xdp_convert_buff_to_md().

Reported-by: syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84
Fixes: 1c1949982524 ("bpf: introduce frags support to bpf_prog_test_run_xdp()")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/af090e53-9d9b-4412-8acb-957733b3975c@I-love.SAKURA.ne.jp
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bpf/test_run.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/net/bpf/test_run.c b/net/bpf/test_run.c
index 88fdcfb2fdd30..59edba6994c34 100644
--- a/net/bpf/test_run.c
+++ b/net/bpf/test_run.c
@@ -1373,13 +1373,13 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
 
 			if (sinfo->nr_frags == MAX_SKB_FRAGS) {
 				ret = -ENOMEM;
-				goto out;
+				goto out_put_dev;
 			}
 
 			page = alloc_page(GFP_KERNEL);
 			if (!page) {
 				ret = -ENOMEM;
-				goto out;
+				goto out_put_dev;
 			}
 
 			frag = &sinfo->frags[sinfo->nr_frags++];
@@ -1392,7 +1392,7 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
 			if (copy_from_user(page_address(page), data_in + size,
 					   data_len)) {
 				ret = -EFAULT;
-				goto out;
+				goto out_put_dev;
 			}
 			sinfo->xdp_frags_size += data_len;
 			size += data_len;
@@ -1407,6 +1407,7 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
 		ret = bpf_test_run_xdp_live(prog, &xdp, repeat, batch_size, &duration);
 	else
 		ret = bpf_test_run(prog, &xdp, repeat, &retval, &duration, true);
+out_put_dev:
 	/* We convert the xdp_buff back to an xdp_md before checking the return
 	 * code so the reference count of any held netdevice will be decremented
 	 * even if the test run failed.
-- 
2.51.0

[PATCH 6.1 66/72] powercap: fix race condition in register_control_type()

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sumeet Pawnikar <sumeet4linux@gmail.com>

[ Upstream commit 7bda1910c4bccd4b8d4726620bb3d6bbfb62286e ]

The device becomes visible to userspace via device_register()
even before it fully initialized by idr_init(). If userspace
or another thread tries to register a zone immediately after
device_register(), the control_type_valid() will fail because
the control_type is not yet in the list. The IDR is not yet
initialized, so this race condition causes zone registration
failure.

Move idr_init() and list addition before device_register()
fix the race condition.

Signed-off-by: Sumeet Pawnikar <sumeet4linux@gmail.com>
[ rjw: Subject adjustment, empty line added ]
Link: https://patch.msgid.link/20251205190216.5032-1-sumeet4linux@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/powercap/powercap_sys.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/powercap/powercap_sys.c b/drivers/powercap/powercap_sys.c
index fd475e463d1fa..d7dadcaa3736b 100644
--- a/drivers/powercap/powercap_sys.c
+++ b/drivers/powercap/powercap_sys.c
@@ -624,17 +624,23 @@ struct powercap_control_type *powercap_register_control_type(
 	INIT_LIST_HEAD(&control_type->node);
 	control_type->dev.class = &powercap_class;
 	dev_set_name(&control_type->dev, "%s", name);
-	result = device_register(&control_type->dev);
-	if (result) {
-		put_device(&control_type->dev);
-		return ERR_PTR(result);
-	}
 	idr_init(&control_type->idr);
 
 	mutex_lock(&powercap_cntrl_list_lock);
 	list_add_tail(&control_type->node, &powercap_cntrl_list);
 	mutex_unlock(&powercap_cntrl_list_lock);
 
+	result = device_register(&control_type->dev);
+	if (result) {
+		mutex_lock(&powercap_cntrl_list_lock);
+		list_del(&control_type->node);
+		mutex_unlock(&powercap_cntrl_list_lock);
+
+		idr_destroy(&control_type->idr);
+		put_device(&control_type->dev);
+		return ERR_PTR(result);
+	}
+
 	return control_type;
 }
 EXPORT_SYMBOL_GPL(powercap_register_control_type);
-- 
2.51.0

[PATCH 6.1 67/72] powercap: fix sscanf() error return value handling

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sumeet Pawnikar <sumeet4linux@gmail.com>

[ Upstream commit efc4c35b741af973de90f6826bf35d3b3ac36bf1 ]

Fix inconsistent error handling for sscanf() return value check.

Implicit boolean conversion is used instead of explicit return
value checks. The code checks if (!sscanf(...)) which is incorrect
because:
 1. sscanf returns the number of successfully parsed items
 2. On success, it returns 1 (one item passed)
 3. On failure, it returns 0 or EOF
 4. The check 'if (!sscanf(...))' is wrong because it treats
    success (1) as failure

All occurrences of sscanf() now uses explicit return value check.
With this behavior it returns '-EINVAL' when parsing fails (returns
0 or EOF), and continues when parsing succeeds (returns 1).

Signed-off-by: Sumeet Pawnikar <sumeet4linux@gmail.com>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20251207151549.202452-1-sumeet4linux@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/powercap/powercap_sys.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/powercap/powercap_sys.c b/drivers/powercap/powercap_sys.c
index d7dadcaa3736b..72fa1f5affcea 100644
--- a/drivers/powercap/powercap_sys.c
+++ b/drivers/powercap/powercap_sys.c
@@ -67,7 +67,7 @@ static ssize_t show_constraint_##_attr(struct device *dev, \
 	int id; \
 	struct powercap_zone_constraint *pconst;\
 	\
-	if (!sscanf(dev_attr->attr.name, "constraint_%d_", &id)) \
+	if (sscanf(dev_attr->attr.name, "constraint_%d_", &id) != 1) \
 		return -EINVAL; \
 	if (id >= power_zone->const_id_cnt)	\
 		return -EINVAL; \
@@ -92,7 +92,7 @@ static ssize_t store_constraint_##_attr(struct device *dev,\
 	int id; \
 	struct powercap_zone_constraint *pconst;\
 	\
-	if (!sscanf(dev_attr->attr.name, "constraint_%d_", &id)) \
+	if (sscanf(dev_attr->attr.name, "constraint_%d_", &id) != 1) \
 		return -EINVAL; \
 	if (id >= power_zone->const_id_cnt)	\
 		return -EINVAL; \
@@ -161,7 +161,7 @@ static ssize_t show_constraint_name(struct device *dev,
 	ssize_t len = -ENODATA;
 	struct powercap_zone_constraint *pconst;
 
-	if (!sscanf(dev_attr->attr.name, "constraint_%d_", &id))
+	if (sscanf(dev_attr->attr.name, "constraint_%d_", &id) != 1)
 		return -EINVAL;
 	if (id >= power_zone->const_id_cnt)
 		return -EINVAL;
-- 
2.51.0

[PATCH 6.1 68/72] can: j1939: make j1939_session_activate() fail if device is no longer registered

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

[ Upstream commit 5d5602236f5db19e8b337a2cd87a90ace5ea776d ]

syzbot is still reporting

  unregister_netdevice: waiting for vcan0 to become free. Usage count = 2

even after commit 93a27b5891b8 ("can: j1939: add missing calls in
NETDEV_UNREGISTER notification handler") was added. A debug printk() patch
found that j1939_session_activate() can succeed even after
j1939_cancel_active_session() from j1939_netdev_notify(NETDEV_UNREGISTER)
has completed.

Since j1939_cancel_active_session() is processed with the session list lock
held, checking ndev->reg_state in j1939_session_activate() with the session
list lock held can reliably close the race window.

Reported-by: syzbot <syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/b9653191-d479-4c8b-8536-1326d028db5c@I-love.SAKURA.ne.jp
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/can/j1939/transport.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c
index 76d625c668e05..0522c223570c7 100644
--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -1571,6 +1571,8 @@ int j1939_session_activate(struct j1939_session *session)
 	if (active) {
 		j1939_session_put(active);
 		ret = -EAGAIN;
+	} else if (priv->ndev->reg_state != NETREG_REGISTERED) {
+		ret = -ENODEV;
 	} else {
 		WARN_ON_ONCE(session->state != J1939_SESSION_NEW);
 		list_add_tail(&session->active_session_list_entry,
-- 
2.51.0

[PATCH 6.1 69/72] ASoC: amd: yc: Add quirk for Honor MagicBook X16 2025

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Elantsev <elantsew.andrew@gmail.com>

[ Upstream commit e2cb8ef0372665854fca6fa7b30b20dd35acffeb ]

Add a DMI quirk for the Honor MagicBook X16 2025 laptop
fixing the issue where the internal microphone was
not detected.

Signed-off-by: Andrew Elantsev <elantsew.andrew@gmail.com>
Link: https://patch.msgid.link/20251210203800.142822-1-elantsew.andrew@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/amd/yc/acp6x-mach.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c
index fce918a089e37..cbb2a1d1a823c 100644
--- a/sound/soc/amd/yc/acp6x-mach.c
+++ b/sound/soc/amd/yc/acp6x-mach.c
@@ -521,6 +521,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Bravo 15 C7UCX"),
 		}
 	},
+	{
+		.driver_data = &acp6x_card,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "HONOR"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "GOH-X"),
+		}
+	},
 	{}
 };
 
-- 
2.51.0

[PATCH 6.1 70/72] ASoC: fsl_sai: Add missing registers to cache default

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 90ed688792a6b7012b3e8a2f858bc3fe7454d0eb ]

Drivers does cache sync during runtime resume, setting all writable
registers. Not all writable registers are set in cache default, resulting
in the erorr message:
  fsl-sai 30c30000.sai: using zero-initialized flat cache, this may cause
  unexpected behavior

Fix this by adding missing writable register defaults.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patch.msgid.link/20251216102246.676181-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/fsl_sai.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index f5266be2bbc22..9a5be1d72a907 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -979,6 +979,7 @@ static struct reg_default fsl_sai_reg_defaults_ofs0[] = {
 	{FSL_SAI_TDR6, 0},
 	{FSL_SAI_TDR7, 0},
 	{FSL_SAI_TMR, 0},
+	{FSL_SAI_TTCTL, 0},
 	{FSL_SAI_RCR1(0), 0},
 	{FSL_SAI_RCR2(0), 0},
 	{FSL_SAI_RCR3(0), 0},
@@ -1002,12 +1003,14 @@ static struct reg_default fsl_sai_reg_defaults_ofs8[] = {
 	{FSL_SAI_TDR6, 0},
 	{FSL_SAI_TDR7, 0},
 	{FSL_SAI_TMR, 0},
+	{FSL_SAI_TTCTL, 0},
 	{FSL_SAI_RCR1(8), 0},
 	{FSL_SAI_RCR2(8), 0},
 	{FSL_SAI_RCR3(8), 0},
 	{FSL_SAI_RCR4(8), 0},
 	{FSL_SAI_RCR5(8), 0},
 	{FSL_SAI_RMR, 0},
+	{FSL_SAI_RTCTL, 0},
 	{FSL_SAI_MCTL, 0},
 	{FSL_SAI_MDIV, 0},
 };
-- 
2.51.0

[PATCH 6.1 71/72] scsi: sg: Fix occasional bogus elapsed time that exceeds timeout

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michal Rábek <mrabek@redhat.com>

[ Upstream commit 0e1677654259a2f3ccf728de1edde922a3c4ba57 ]

A race condition was found in sg_proc_debug_helper(). It was observed on
a system using an IBM LTO-9 SAS Tape Drive (ULTRIUM-TD9) and monitoring
/proc/scsi/sg/debug every second. A very large elapsed time would
sometimes appear. This is caused by two race conditions.

We reproduced the issue with an IBM ULTRIUM-HH9 tape drive on an x86_64
architecture. A patched kernel was built, and the race condition could
not be observed anymore after the application of this patch. A
reproducer C program utilising the scsi_debug module was also built by
Changhui Zhong and can be viewed here:

https://github.com/MichaelRabek/linux-tests/blob/master/drivers/scsi/sg/sg_race_trigger.c

The first race happens between the reading of hp->duration in
sg_proc_debug_helper() and request completion in sg_rq_end_io().  The
hp->duration member variable may hold either of two types of
information:

 #1 - The start time of the request. This value is present while
      the request is not yet finished.

 #2 - The total execution time of the request (end_time - start_time).

If sg_proc_debug_helper() executes *after* the value of hp->duration was
changed from #1 to #2, but *before* srp->done is set to 1 in
sg_rq_end_io(), a fresh timestamp is taken in the else branch, and the
elapsed time (value type #2) is subtracted from a timestamp, which
cannot yield a valid elapsed time (which is a type #2 value as well).

To fix this issue, the value of hp->duration must change under the
protection of the sfp->rq_list_lock in sg_rq_end_io().  Since
sg_proc_debug_helper() takes this read lock, the change to srp->done and
srp->header.duration will happen atomically from the perspective of
sg_proc_debug_helper() and the race condition is thus eliminated.

The second race condition happens between sg_proc_debug_helper() and
sg_new_write(). Even though hp->duration is set to the current time
stamp in sg_add_request() under the write lock's protection, it gets
overwritten by a call to get_sg_io_hdr(), which calls copy_from_user()
to copy struct sg_io_hdr from userspace into kernel space. hp->duration
is set to the start time again in sg_common_write(). If
sg_proc_debug_helper() is called between these two calls, an arbitrary
value set by userspace (usually zero) is used to compute the elapsed
time.

To fix this issue, hp->duration must be set to the current timestamp
again after get_sg_io_hdr() returns successfully. A small race window
still exists between get_sg_io_hdr() and setting hp->duration, but this
window is only a few instructions wide and does not result in observable
issues in practice, as confirmed by testing.

Additionally, we fix the format specifier from %d to %u for printing
unsigned int values in sg_proc_debug_helper().

Signed-off-by: Michal Rábek <mrabek@redhat.com>
Suggested-by: Tomas Henzl <thenzl@redhat.com>
Tested-by: Changhui Zhong <czhong@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Link: https://patch.msgid.link/20251212160900.64924-1-mrabek@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/sg.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 7a5d73f89f459..b63f7c09c97a1 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -735,6 +735,8 @@ sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf,
 		sg_remove_request(sfp, srp);
 		return -EFAULT;
 	}
+	hp->duration = jiffies_to_msecs(jiffies);
+
 	if (hp->interface_id != 'S') {
 		sg_remove_request(sfp, srp);
 		return -ENOSYS;
@@ -819,7 +821,6 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp,
 		return -ENODEV;
 	}
 
-	hp->duration = jiffies_to_msecs(jiffies);
 	if (hp->interface_id != '\0' &&	/* v3 (or later) interface */
 	    (SG_FLAG_Q_AT_TAIL & hp->flags))
 		at_head = 0;
@@ -1342,9 +1343,6 @@ sg_rq_end_io(struct request *rq, blk_status_t status)
 				      "sg_cmd_done: pack_id=%d, res=0x%x\n",
 				      srp->header.pack_id, result));
 	srp->header.resid = resid;
-	ms = jiffies_to_msecs(jiffies);
-	srp->header.duration = (ms > srp->header.duration) ?
-				(ms - srp->header.duration) : 0;
 	if (0 != result) {
 		struct scsi_sense_hdr sshdr;
 
@@ -1393,6 +1391,9 @@ sg_rq_end_io(struct request *rq, blk_status_t status)
 			done = 0;
 	}
 	srp->done = done;
+	ms = jiffies_to_msecs(jiffies);
+	srp->header.duration = (ms > srp->header.duration) ?
+				(ms - srp->header.duration) : 0;
 	write_unlock_irqrestore(&sfp->rq_list_lock, iflags);
 
 	if (likely(done)) {
@@ -2529,6 +2530,7 @@ static void sg_proc_debug_helper(struct seq_file *s, Sg_device * sdp)
 	const sg_io_hdr_t *hp;
 	const char * cp;
 	unsigned int ms;
+	unsigned int duration;
 
 	k = 0;
 	list_for_each_entry(fp, &sdp->sfds, sfd_siblings) {
@@ -2566,13 +2568,17 @@ static void sg_proc_debug_helper(struct seq_file *s, Sg_device * sdp)
 			seq_printf(s, " id=%d blen=%d",
 				   srp->header.pack_id, blen);
 			if (srp->done)
-				seq_printf(s, " dur=%d", hp->duration);
+				seq_printf(s, " dur=%u", hp->duration);
 			else {
 				ms = jiffies_to_msecs(jiffies);
-				seq_printf(s, " t_o/elap=%d/%d",
+				duration = READ_ONCE(hp->duration);
+				if (duration)
+					duration = (ms > duration ?
+						    ms - duration : 0);
+				seq_printf(s, " t_o/elap=%u/%u",
 					(new_interface ? hp->timeout :
 						  jiffies_to_msecs(fp->timeout)),
-					(ms > hp->duration ? ms - hp->duration : 0));
+					duration);
 			}
 			seq_printf(s, "ms sgat=%d op=0x%02x\n", usg,
 				   (int) srp->data.cmd_opcode);
-- 
2.51.0

[PATCH 6.1 72/72] bpf: test_run: Fix ctx leak in bpf_prog_test_run_xdp error path

[Greg Kroah-Hartman]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shardul Bankar <shardulsb08@gmail.com>

commit 7f9ee5fc97e14682e36fe22ae2654c07e4998b82 upstream.

Fix a memory leak in bpf_prog_test_run_xdp() where the context buffer
allocated by bpf_ctx_init() is not freed when the function returns early
due to a data size check.

On the failing path:
  ctx = bpf_ctx_init(...);
  if (kattr->test.data_size_in - meta_sz < ETH_HLEN)
      return -EINVAL;

The early return bypasses the cleanup label that kfree()s ctx, leading to a
leak detectable by kmemleak under fuzzing. Change the return to jump to the
existing free_ctx label.

Fixes: fe9544ed1a2e ("bpf: Support specifying linear xdp packet data size for BPF_PROG_TEST_RUN")
Reported-by: BPF Runtime Fuzzer (BRF)
Signed-off-by: Shardul Bankar <shardulsb08@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20251014120037.1981316-1-shardulsb08@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bpf/test_run.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/bpf/test_run.c
+++ b/net/bpf/test_run.c
@@ -1344,7 +1344,7 @@ int bpf_prog_test_run_xdp(struct bpf_pro
 		goto free_ctx;
 
 	if (kattr->test.data_size_in - meta_sz < ETH_HLEN)
-		return -EINVAL;
+		goto free_ctx;
 
 	data = bpf_test_init(kattr, linear_sz, max_linear_sz, headroom, tailroom);
 	if (IS_ERR(data)) {

Re: [PATCH 6.1 00/72] 6.1.161-rc1 review

[Brett A C Sheffield]

# Librecast Test Results

020/020 [ OK ] liblcrq
010/010 [ OK ] libmld
120/120 [ OK ] liblibrecast

CPU/kernel: Linux auntie 6.1.161-rc1-00073-g9f1df8edf447 #1 SMP PREEMPT_DYNAMIC Thu Jan 15 18:29:29 -00 2026 x86_64 AMD Ryzen 9 9950X 16-Core Processor AuthenticAMD GNU/Linux

Tested-by: Brett A C Sheffield <bacs@librecast.net>

Re: [PATCH 6.1 00/72] 6.1.161-rc1 review

[Slade Watkins]

On Thu, Jan 15, 2026 at 12:11 PM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.1.161 release.
> There are 72 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 17 Jan 2026 16:41:26 +0000.
> Anything received after that time might be too late.

6.1.161-rc1 built and run on my x86_64 test system (AMD Ryzen 9 9900X,
System76 thelio-mira-r4-n3). No errors or regressions.

Tested-by: Slade Watkins <sr@sladewatkins.com>

Thanks,
Slade

Re: [PATCH 6.1 00/72] 6.1.161-rc1 review

[Florian Fainelli]

On 1/15/26 08:48, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.161 release.
> There are 72 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 17 Jan 2026 16:41:26 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.161-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH 6.1 00/72] 6.1.161-rc1 review

[Francesco Dolcini]

On Thu, Jan 15, 2026 at 05:48:10PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.161 release.
> There are 72 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.


Compiled and tested on

 - Verdin iMX8MM
 - Verdin iMX8MP
 - Colibri iMX6
 - Colibri iMX6ULL
 - Colibri iMX7
 - Apalis iMX6

Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com>

Re: [PATCH 6.1 00/72] 6.1.161-rc1 review

[Peter Schneider]

Am 15.01.2026 um 17:48 schrieb Greg Kroah-Hartman:
> This is the start of the stable review cycle for the 6.1.161 release.
> There are 72 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Builds, boots and works on my 2-socket Ivy Bridge Xeon E5-2697 v2 server. No dmesg oddities or regressions found.

Tested-by: Peter Schneider <pschneider1968@googlemail.com>


Beste Grüße,
Peter Schneider

-- 
Climb the mountain not to plant your flag, but to embrace the challenge,
enjoy the air and behold the view. Climb it so you can see the world,
not so the world can see you.                    -- David McCullough Jr.

OpenPGP:  0xA3828BD796CCE11A8CADE8866E3A92C92C3FF244
Download: https://www.peters-netzplatz.de/download/pschneider1968_pub.asc
https://keys.mailvelope.com/pks/lookup?op=get&search=pschneider1968@googlemail.com
https://keys.mailvelope.com/pks/lookup?op=get&search=pschneider1968@gmail.com

Re: [PATCH 6.1 00/72] 6.1.161-rc1 review

[Ron Economos]

On 1/15/26 08:48, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.161 release.
> There are 72 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 17 Jan 2026 16:41:26 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.161-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by: Ron Economos <re@w6rz.net>

Re: [PATCH 6.1 00/72] 6.1.161-rc1 review

[Jon Hunter]

On Thu, 15 Jan 2026 17:48:10 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.161 release.
> There are 72 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 17 Jan 2026 16:41:26 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.161-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v6.1:
    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    119 tests:	119 pass, 0 fail

Linux version:	6.1.161-rc1-g9f1df8edf447
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra186-p3509-0000+p3636-0001, tegra194-p2972-0000,
                tegra194-p3509-0000+p3668-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 6.1 00/72] 6.1.161-rc1 review

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 345 bytes --]

On Thu, Jan 15, 2026 at 05:48:10PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.161 release.
> There are 72 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Tested-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 6.1 00/72] 6.1.161-rc1 review

[Hardik Garg]

The kernel, bpf tool, perf tool, and kselftest builds fine for v6.1.161-rc1
on x86 and arm64 Azure VM.


Tested-by: Hardik Garg <hargar@linux.microsoft.com>


Thanks,
Hardik

Re: [PATCH 6.1 00/72] 6.1.161-rc1 review

[Shuah Khan]

On 1/15/26 09:48, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.161 release.
> There are 72 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 17 Jan 2026 16:41:26 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.161-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 6.1 00/72] 6.1.161-rc1 review

[Miguel Ojeda]

On Thu, 15 Jan 2026 17:48:10 +0100 Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.1.161 release.
> There are 72 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 17 Jan 2026 16:41:26 +0000.
> Anything received after that time might be too late.

Boot-tested under QEMU for Rust x86_64:

Tested-by: Miguel Ojeda <ojeda@kernel.org>

Thanks!

Cheers,
Miguel

Re: [PATCH 6.1 00/72] 6.1.161-rc1 review

[Jeffrin Thalakkottoor]

[-- Attachment #1: Type: text/plain, Size: 536 bytes --]

hello

Compiled and booted   6.1.161-rc1+

warnings related found in dmesg. file attached.

As per dmidecode command.
Version: AMD Ryzen 3 3250U with Radeon Graphics

Processor Information
        Socket Designation: FP5
        Type: Central Processor
        Family: Zen
        Manufacturer: Advanced Micro Devices, Inc.
        ID: 81 0F 81 00 FF FB 8B 17
        Signature: Family 23, Model 24, Stepping 1

Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>

--
software engineer
rajagiri school of engineering and technology

[-- Attachment #2: dmesg-warn-6.1.161-rc1+.txt --]
[-- Type: text/plain, Size: 11121 bytes --]

[    0.224732] VMSCAPE: SMT on, STIBP is required for full protection. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/vmscape.html for more details.
[    0.224836]   #2  #3
[    1.137862] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[   11.490631] amdgpu 0000:04:00.0: amdgpu: PSP runtime database doesn't exist
[   11.490638] amdgpu 0000:04:00.0: amdgpu: PSP runtime database doesn't exist
[   11.562569] amdgpu 0000:04:00.0: amdgpu: failed to load ucode RLC_RESTORE_LIST_CNTL(0x28) 
[   11.562573] amdgpu 0000:04:00.0: amdgpu: psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF300F)
[   11.563311] amdgpu 0000:04:00.0: amdgpu: failed to load ucode RLC_RESTORE_LIST_GPM_MEM(0x29) 
[   11.563314] amdgpu 0000:04:00.0: amdgpu: psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
[   11.564258] amdgpu 0000:04:00.0: amdgpu: failed to load ucode RLC_RESTORE_LIST_SRM_MEM(0x2A) 
[   11.564261] amdgpu 0000:04:00.0: amdgpu: psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
[   15.434086] systemd-sysv-generator[324]: SysV service '/etc/init.d/lpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[   15.434091] systemd-sysv-generator[324]: Please update package to include a native systemd unit file.
[   15.434095] systemd-sysv-generator[324]: ! This compatibility logic is deprecated, expect removal soon. !
[   15.435931] systemd-sysv-generator[324]: SysV service '/etc/init.d/lightdm' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[   15.435934] systemd-sysv-generator[324]: Please update package to include a native systemd unit file.
[   15.435937] systemd-sysv-generator[324]: ! This compatibility logic is deprecated, expect removal soon. !
[   15.442186] systemd-sysv-generator[324]: SysV service '/etc/init.d/fetchmail' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[   15.442191] systemd-sysv-generator[324]: Please update package to include a native systemd unit file.
[   15.442194] systemd-sysv-generator[324]: ! This compatibility logic is deprecated, expect removal soon. !
[   24.271517] kauditd_printk_skb: 126 callbacks suppressed
[   46.535261] ------------[ cut here ]------------
[   46.535266] amdgpu 0000:04:00.0: drm_WARN_ON(!dev->mode_config.poll_enabled)
[   46.535360] WARNING: CPU: 1 PID: 2261 at drivers/gpu/drm/drm_probe_helper.c:838 drm_kms_helper_poll_disable+0x55/0x60 [drm_kms_helper]
[   46.535390] Modules linked in: ccm xt_conntrack nft_chain_nat rtw88_8822ce rtw88_8822c xt_MASQUERADE nf_nat rtw88_pci nf_conntrack rtw88_core uhid rfcomm cmac nf_defrag_ipv6 algif_hash algif_skcipher nf_defrag_ipv4 mac80211 af_alg bridge bnep snd_sof_amd_rembrandt stp llc snd_sof_pci xfrm_user snd_sof_amd_acp xfrm_algo snd_sof btusb btrtl xt_addrtype btbcm nft_compat x_tables btintel nf_tables btmtk snd_sof_utils uvcvideo snd_soc_core bluetooth intel_rapl_msr intel_rapl_common kvm_amd videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common snd_hda_codec_generic kvm snd_hda_codec_hdmi snd_seq_dummy snd_hrtimer snd_hda_intel snd_seq videodev snd_seq_device snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pci_ps snd_rpl_pci_acp6x snd_acp_pci overlay qrtr snd_pci_acp6x libarc4 snd_pcm_oss cfg80211 irqbypass snd_mixer_oss ghash_clmulni_intel snd_pcm aesni_intel mc crypto_simd hp_wmi cryptd snd_pci_acp5x binfmt_misc rapl sparse_keymap pcspkr wmi_bmof platform_profile
[   46.535508]  snd_rn_pci_acp3x snd_timer snd_acp_config snd ccp nls_ascii snd_soc_acpi nls_cp437 vfat k10temp fat snd_pci_acp3x rfkill soundcore battery ac acpi_tad button acpi_cpufreq joydev evdev msr i2c_dev parport_pc ppdev lp configfs parport efi_pstore nfnetlink autofs4 ext4 crc16 mbcache jbd2 raid10 raid456 libcrc32c crc32c_generic async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 md_mod amdgpu drm_ttm_helper ttm iommu_v2 gpu_sched i2c_algo_bit drm_buddy drm_display_helper drm_kms_helper xhci_pci xhci_hcd drm usbcore nvme hid_multitouch hid_generic nvme_core i2c_hid_acpi sp5100_tco usb_common t10_pi i2c_hid serio_raw hid watchdog video crc64_rocksoft wmi i2c_piix4 efivarfs
[   46.535616] CPU: 1 PID: 2261 Comm: kworker/u32:9 Not tainted 6.1.161-rc1+ #39
[   46.535622] Hardware name: HP HP Laptop 15s-ey1xxx/8706, BIOS F.61 03/25/2022
[   46.535625] Workqueue: events_unbound async_run_entry_fn
[   46.535634] RIP: 0010:drm_kms_helper_poll_disable+0x55/0x60 [drm_kms_helper]
[   46.535652] Code: 85 d2 75 03 48 8b 17 48 89 14 24 e8 f5 33 6d e7 48 8b 14 24 48 c7 c1 58 fd 70 c0 48 c7 c7 76 11 71 c0 48 89 c6 e8 fb 72 fb e6 <0f> 0b 48 83 c4 08 e9 40 5e d0 e7 f3 0f 1e fa 0f 1f 44 00 00 55 53
[   46.535655] RSP: 0018:ffffd3e7c8313d90 EFLAGS: 00010246
[   46.535659] RAX: 0000000000000000 RBX: ffff8c8430c20010 RCX: 0000000000000027
[   46.535662] RDX: ffff8c8498a613e8 RSI: 0000000000000001 RDI: ffff8c8498a613e0
[   46.535664] RBP: ffff8c8430c20000 R08: 0000000000000001 R09: ffffd3e7c8313c50
[   46.535666] R10: ffffffffa90811e0 R11: 00000000fffff40c R12: 0000000000000001
[   46.535668] R13: 0000000000000002 R14: 0000000000000000 R15: ffff8c843464d5c8
[   46.535671] FS:  0000000000000000(0000) GS:ffff8c8498a40000(0000) knlGS:0000000000000000
[   46.535674] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   46.535676] CR2: 00007f410b041010 CR3: 000000011113e000 CR4: 00000000003506e0
[   46.535680] Call Trace:
[   46.535685]  <TASK>
[   46.535692]  amdgpu_device_suspend+0x51/0x130 [amdgpu]
[   46.535941]  pci_pm_suspend+0x80/0x170
[   46.535949]  ? pci_pm_freeze+0xe0/0xe0
[   46.535953]  dpm_run_callback+0x4a/0x150
[   46.535962]  __device_suspend+0x106/0x490
[   46.535968]  async_suspend+0x21/0xe0
[   46.535972]  ? srso_return_thunk+0x5/0x10
[   46.535978]  ? srso_return_thunk+0x5/0x10
[   46.535982]  async_run_entry_fn+0x34/0x130
[   46.535987]  process_one_work+0x1cf/0x3a0
[   46.535995]  ? process_one_work+0x3a0/0x3a0
[   46.535999]  worker_thread+0x50/0x390
[   46.536006]  ? process_one_work+0x3a0/0x3a0
[   46.536010]  kthread+0xde/0x110
[   46.536015]  ? kthread_complete_and_exit+0x20/0x20
[   46.536021]  ret_from_fork+0x22/0x30
[   46.536034]  </TASK>
[   46.536036] ---[ end trace 0000000000000000 ]---
[   47.649833] amdgpu 0000:04:00.0: amdgpu: failed to load ucode RLC_RESTORE_LIST_CNTL(0x28) 
[   47.649838] amdgpu 0000:04:00.0: amdgpu: psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF300F)
[   47.650376] amdgpu 0000:04:00.0: amdgpu: failed to load ucode RLC_RESTORE_LIST_GPM_MEM(0x29) 
[   47.650379] amdgpu 0000:04:00.0: amdgpu: psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
[   47.650919] amdgpu 0000:04:00.0: amdgpu: failed to load ucode RLC_RESTORE_LIST_SRM_MEM(0x2A) 
[   47.650922] amdgpu 0000:04:00.0: amdgpu: psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
[   47.712103] ------------[ cut here ]------------
[   47.712106] amdgpu 0000:04:00.0: drm_WARN_ON_ONCE(!dev->mode_config.poll_enabled)
[   47.712209] WARNING: CPU: 1 PID: 9 at drivers/gpu/drm/drm_probe_helper.c:252 drm_kms_helper_poll_enable+0x114/0x120 [drm_kms_helper]
[   47.712237] Modules linked in: ccm xt_conntrack nft_chain_nat rtw88_8822ce rtw88_8822c xt_MASQUERADE nf_nat rtw88_pci nf_conntrack rtw88_core uhid rfcomm cmac nf_defrag_ipv6 algif_hash algif_skcipher nf_defrag_ipv4 mac80211 af_alg bridge bnep snd_sof_amd_rembrandt stp llc snd_sof_pci xfrm_user snd_sof_amd_acp xfrm_algo snd_sof btusb btrtl xt_addrtype btbcm nft_compat x_tables btintel nf_tables btmtk snd_sof_utils uvcvideo snd_soc_core bluetooth intel_rapl_msr intel_rapl_common kvm_amd videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common snd_hda_codec_generic kvm snd_hda_codec_hdmi snd_seq_dummy snd_hrtimer snd_hda_intel snd_seq videodev snd_seq_device snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pci_ps snd_rpl_pci_acp6x snd_acp_pci overlay qrtr snd_pci_acp6x libarc4 snd_pcm_oss cfg80211 irqbypass snd_mixer_oss ghash_clmulni_intel snd_pcm aesni_intel mc crypto_simd hp_wmi cryptd snd_pci_acp5x binfmt_misc rapl sparse_keymap pcspkr wmi_bmof platform_profile
[   47.712349]  snd_rn_pci_acp3x snd_timer snd_acp_config snd ccp nls_ascii snd_soc_acpi nls_cp437 vfat k10temp fat snd_pci_acp3x rfkill soundcore battery ac acpi_tad button acpi_cpufreq joydev evdev msr i2c_dev parport_pc ppdev lp configfs parport efi_pstore nfnetlink autofs4 ext4 crc16 mbcache jbd2 raid10 raid456 libcrc32c crc32c_generic async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 md_mod amdgpu drm_ttm_helper ttm iommu_v2 gpu_sched i2c_algo_bit drm_buddy drm_display_helper drm_kms_helper xhci_pci xhci_hcd drm usbcore nvme hid_multitouch hid_generic nvme_core i2c_hid_acpi sp5100_tco usb_common t10_pi i2c_hid serio_raw hid watchdog video crc64_rocksoft wmi i2c_piix4 efivarfs
[   47.712452] CPU: 1 PID: 9 Comm: kworker/u32:0 Tainted: G        W          6.1.161-rc1+ #39
[   47.712456] Hardware name: HP HP Laptop 15s-ey1xxx/8706, BIOS F.61 03/25/2022
[   47.712460] Workqueue: events_unbound async_run_entry_fn
[   47.712468] RIP: 0010:drm_kms_helper_poll_enable+0x114/0x120 [drm_kms_helper]
[   47.712485] Code: 48 8b 5f 50 48 85 db 75 03 48 8b 1f e8 d5 32 6d e7 48 c7 c1 88 fd 70 c0 48 89 da 48 c7 c7 76 11 71 c0 48 89 c6 e8 dc 71 fb e6 <0f> 0b e9 37 ff ff ff e8 30 37 a6 e7 f3 0f 1e fa 0f 1f 44 00 00 48
[   47.712488] RSP: 0018:ffffd3e7c011fd78 EFLAGS: 00010246
[   47.712492] RAX: 0000000000000000 RBX: ffff8c84010ca100 RCX: 0000000000000027
[   47.712494] RDX: ffff8c8498a613e8 RSI: 0000000000000001 RDI: ffff8c8498a613e0
[   47.712497] RBP: ffff8c8430c20010 R08: 0000000000000001 R09: ffffd3e7c011fc38
[   47.712499] R10: ffffffffa90811e0 R11: 00000000fffff473 R12: ffffffffa89276f7
[   47.712501] R13: 0000000000000010 R14: 0000000000000001 R15: ffff8c8422c3b088
[   47.712503] FS:  0000000000000000(0000) GS:ffff8c8498a40000(0000) knlGS:0000000000000000
[   47.712506] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   47.712509] CR2: 0000000000000000 CR3: 0000000093210000 CR4: 00000000003506e0
[   47.712511] Call Trace:
[   47.712515]  <TASK>
[   47.712523]  amdgpu_device_resume+0x124/0x320 [amdgpu]
[   47.712809]  amdgpu_pmops_resume+0x46/0x80 [amdgpu]
[   47.713008]  ? pci_legacy_resume+0x80/0x80
[   47.713015]  dpm_run_callback+0x4a/0x150
[   47.713024]  __device_resume+0xb0/0x2c0
[   47.713027]  ? srso_return_thunk+0x5/0x10
[   47.713034]  ? try_to_wake_up+0x61/0x650
[   47.713040]  async_resume+0x21/0x30
[   47.713044]  async_run_entry_fn+0x34/0x130
[   47.713049]  process_one_work+0x1cf/0x3a0
[   47.713057]  ? process_one_work+0x3a0/0x3a0
[   47.713060]  worker_thread+0x50/0x390
[   47.713066]  ? process_one_work+0x3a0/0x3a0
[   47.713069]  kthread+0xde/0x110
[   47.713073]  ? kthread_complete_and_exit+0x20/0x20
[   47.713078]  ret_from_fork+0x22/0x30
[   47.713091]  </TASK>
[   47.713092] ---[ end trace 0000000000000000 ]---
[   49.138525] done.