FAILED: patch "[PATCH] mmc: sdhci-of-dwcmshc: Prevent illegal clock reduction in" failed to apply to 6.1-stable tree

[<gregkh@linuxfoundation.org>]

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 3009738a855cf938bbfc9078bec725031ae623a4
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026012749-barrier-oppressor-3ac6@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 3009738a855cf938bbfc9078bec725031ae623a4 Mon Sep 17 00:00:00 2001
From: Shawn Lin <shawn.lin@rock-chips.com>
Date: Mon, 22 Dec 2025 15:11:25 +0800
Subject: [PATCH] mmc: sdhci-of-dwcmshc: Prevent illegal clock reduction in
 HS200/HS400 mode

When operating in HS200 or HS400 timing modes, reducing the clock frequency
below 52MHz will lead to link broken as the Rockchip DWC MSHC controller
requires maintaining a minimum clock of 52MHz in these modes.

Add a check to prevent illegal clock reduction through debugfs:

root@debian:/# echo 50000000 > /sys/kernel/debug/mmc0/clock
root@debian:/# [   30.090146] mmc0: running CQE recovery
mmc0: cqhci: Failed to halt
mmc0: cqhci: spurious TCN for tag 0
WARNING: drivers/mmc/host/cqhci-core.c:797 at cqhci_irq+0x254/0x818, CPU#1: kworker/1:0H/24
Modules linked in:
CPU: 1 UID: 0 PID: 24 Comm: kworker/1:0H Not tainted 6.19.0-rc1-00001-g09db0998649d-dirty #204 PREEMPT
Hardware name: Rockchip RK3588 EVB1 V10 Board (DT)
Workqueue: kblockd blk_mq_run_work_fn
pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : cqhci_irq+0x254/0x818
lr : cqhci_irq+0x254/0x818
...

Fixes: c6f361cba51c ("mmc: sdhci-of-dwcmshc: add support for rk3588")
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
index 51949cde0958..204830b40587 100644
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
@@ -739,6 +739,13 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock
 	sdhci_writel(host, extra, reg);
 
 	if (clock <= 52000000) {
+		if (host->mmc->ios.timing == MMC_TIMING_MMC_HS200 ||
+		    host->mmc->ios.timing == MMC_TIMING_MMC_HS400) {
+			dev_err(mmc_dev(host->mmc),
+				"Can't reduce the clock below 52MHz in HS200/HS400 mode");
+			return;
+		}
+
 		/*
 		 * Disable DLL and reset both of sample and drive clock.
 		 * The bypass bit and start bit need to be set if DLL is not locked.