From: <gregkh@linuxfoundation.org>
To: xu.yang_2@nxp.com,ulf.hansson@linaro.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] pmdomain: imx8mp-blk-ctrl: Keep gpc power domain on for" failed to apply to 6.1-stable tree
Date: Sat, 07 Feb 2026 15:39:16 +0100 [thread overview]
Message-ID: <2026020716-elaborate-unroll-e8cc@gregkh> (raw)
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x e9ab2b83893dd03cf04d98faded81190e635233f
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026020716-elaborate-unroll-e8cc@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From e9ab2b83893dd03cf04d98faded81190e635233f Mon Sep 17 00:00:00 2001
From: Xu Yang <xu.yang_2@nxp.com>
Date: Wed, 4 Feb 2026 19:11:41 +0800
Subject: [PATCH] pmdomain: imx8mp-blk-ctrl: Keep gpc power domain on for
system wakeup
Current design will power off all dependent GPC power domains in
imx8mp_blk_ctrl_suspend(), even though the user device has enabled
wakeup capability. The result is that wakeup function never works
for such device.
An example will be USB wakeup on i.MX8MP. PHY device '382f0040.usb-phy'
is attached to power domain 'hsioblk-usb-phy2' which is spawned by hsio
block control. A virtual power domain device 'genpd:3:32f10000.blk-ctrl'
is created to build connection with 'hsioblk-usb-phy2' and it depends on
GPC power domain 'usb-otg2'. If device '382f0040.usb-phy' enable wakeup,
only power domain 'hsioblk-usb-phy2' keeps on during system suspend,
power domain 'usb-otg2' is off all the time. So the wakeup event can't
happen.
In order to further establish a connection between the power domains
related to GPC and block control during system suspend, register a genpd
power on/off notifier for the power_dev. This allows us to prevent the GPC
power domain from being powered off, in case the block control power
domain is kept on to serve system wakeup.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Fixes: 556f5cf9568a ("soc: imx: add i.MX8MP HSIO blk-ctrl")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
diff --git a/drivers/pmdomain/imx/imx8mp-blk-ctrl.c b/drivers/pmdomain/imx/imx8mp-blk-ctrl.c
index 34576be606e3..56bbfee8668d 100644
--- a/drivers/pmdomain/imx/imx8mp-blk-ctrl.c
+++ b/drivers/pmdomain/imx/imx8mp-blk-ctrl.c
@@ -65,6 +65,7 @@ struct imx8mp_blk_ctrl_domain {
struct icc_bulk_data paths[DOMAIN_MAX_PATHS];
struct device *power_dev;
struct imx8mp_blk_ctrl *bc;
+ struct notifier_block power_nb;
int num_paths;
int id;
};
@@ -594,6 +595,20 @@ static int imx8mp_blk_ctrl_power_off(struct generic_pm_domain *genpd)
return 0;
}
+static int imx8mp_blk_ctrl_gpc_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct imx8mp_blk_ctrl_domain *domain =
+ container_of(nb, struct imx8mp_blk_ctrl_domain, power_nb);
+
+ if (action == GENPD_NOTIFY_PRE_OFF) {
+ if (domain->genpd.status == GENPD_STATE_ON)
+ return NOTIFY_BAD;
+ }
+
+ return NOTIFY_OK;
+}
+
static struct lock_class_key blk_ctrl_genpd_lock_class;
static int imx8mp_blk_ctrl_probe(struct platform_device *pdev)
@@ -698,6 +713,14 @@ static int imx8mp_blk_ctrl_probe(struct platform_device *pdev)
goto cleanup_pds;
}
+ domain->power_nb.notifier_call = imx8mp_blk_ctrl_gpc_notifier;
+ ret = dev_pm_genpd_add_notifier(domain->power_dev, &domain->power_nb);
+ if (ret) {
+ dev_err_probe(dev, ret, "failed to add power notifier\n");
+ dev_pm_domain_detach(domain->power_dev, true);
+ goto cleanup_pds;
+ }
+
domain->genpd.name = data->name;
domain->genpd.power_on = imx8mp_blk_ctrl_power_on;
domain->genpd.power_off = imx8mp_blk_ctrl_power_off;
@@ -707,6 +730,7 @@ static int imx8mp_blk_ctrl_probe(struct platform_device *pdev)
ret = pm_genpd_init(&domain->genpd, NULL, true);
if (ret) {
dev_err_probe(dev, ret, "failed to init power domain\n");
+ dev_pm_genpd_remove_notifier(domain->power_dev);
dev_pm_domain_detach(domain->power_dev, true);
goto cleanup_pds;
}
@@ -755,6 +779,7 @@ static int imx8mp_blk_ctrl_probe(struct platform_device *pdev)
cleanup_pds:
for (i--; i >= 0; i--) {
pm_genpd_remove(&bc->domains[i].genpd);
+ dev_pm_genpd_remove_notifier(bc->domains[i].power_dev);
dev_pm_domain_detach(bc->domains[i].power_dev, true);
}
@@ -774,6 +799,7 @@ static void imx8mp_blk_ctrl_remove(struct platform_device *pdev)
struct imx8mp_blk_ctrl_domain *domain = &bc->domains[i];
pm_genpd_remove(&domain->genpd);
+ dev_pm_genpd_remove_notifier(domain->power_dev);
dev_pm_domain_detach(domain->power_dev, true);
}
next reply other threads:[~2026-02-07 14:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-07 14:39 gregkh [this message]
2026-02-07 15:11 ` [PATCH 6.1.y] pmdomain: imx8mp-blk-ctrl: Keep gpc power domain on for system wakeup Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026020716-elaborate-unroll-e8cc@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=stable@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=xu.yang_2@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox