From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev, Zenm Chen <zenmchen@gmail.com>,
Paul Menzel <pmenzel@molgen.mpg.de>,
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Subject: [PATCH 6.6 05/25] Bluetooth: btusb: Add USB ID 7392:e611 for Edimax EW-7611UXB
Date: Fri, 13 Feb 2026 14:48:31 +0100 [thread overview]
Message-ID: <20260213134704.082657368@linuxfoundation.org> (raw)
In-Reply-To: <20260213134703.882698935@linuxfoundation.org>
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zenm Chen <zenmchen@gmail.com>
commit 6c0568b7741a346088fd6dfced2d871f7d481d06 upstream.
Add USB ID 7392:e611 for Edimax EW-7611UXB which is RTL8851BU-based
Wi-Fi + Bluetooth adapter.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below:
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=7392 ProdID=e611 Rev= 0.00
S: Manufacturer=Realtek
S: Product=802.11ax WLAN Adapter
S: SerialNumber=00e04c000001
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtw89_8851bu_git
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable@vger.kernel.org # 6.6.x
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -516,6 +516,8 @@ static const struct usb_device_id quirks
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x2001, 0x332a), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x7392, 0xe611), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
/* Realtek 8852AE Bluetooth devices */
{ USB_DEVICE(0x0bda, 0x2852), .driver_info = BTUSB_REALTEK |
next prev parent reply other threads:[~2026-02-13 13:56 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-13 13:48 [PATCH 6.6 00/25] 6.6.125-rc1 review Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 01/25] smb: client: split cached_fid bitfields to avoid shared-byte RMW races Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 02/25] ksmbd: fix infinite loop caused by next_smb2_rcv_hdr_off reset in error paths Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 03/25] smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection() Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 04/25] driver core: enforce device_lock for driver_match_device() Greg Kroah-Hartman
2026-02-13 13:48 ` Greg Kroah-Hartman [this message]
2026-02-13 13:48 ` [PATCH 6.6 06/25] crypto: octeontx - Fix length check to avoid truncation in ucode_load_store Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 07/25] crypto: omap - Allocate OMAP_CRYPTO_FORCE_COPY scatterlists correctly Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 08/25] crypto: virtio - Add spinlock protection with virtqueue notification Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 09/25] crypto: virtio - Remove duplicated virtqueue_kick in virtio_crypto_skcipher_crypt_req Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 10/25] nilfs2: Fix potential block overflow that cause system hang Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 11/25] wifi: rtw88: Fix alignment fault in rtw_core_enable_beacon() Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 12/25] scsi: qla2xxx: Validate sp before freeing associated memory Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 13/25] scsi: qla2xxx: Allow recovery for tape devices Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 14/25] scsi: qla2xxx: Delay module unload while fabric scan in progress Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 15/25] scsi: qla2xxx: Free sp in error path to fix system crash Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 16/25] scsi: qla2xxx: Query FW again before proceeding with login Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 17/25] net: sfp: Fix quirk for Ubiquiti U-Fiber Instant SFP module Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 18/25] nfsd: dont ignore the return code of svc_proc_register() Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 19/25] netfilter: nf_tables: missing objects with no memcg accounting Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 20/25] netfilter: nft_set_pipapo: prevent overflow in lookup table allocation Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 21/25] vsock/test: verify socket options after setting them Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 22/25] spi: cadence-quadspi: Implement refcount to handle unbind during busy Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 23/25] selftests: mptcp: pm: ensure unknown flags are ignored Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 24/25] mptcp: fix race in mptcp_pm_nl_flush_addrs_doit() Greg Kroah-Hartman
2026-02-13 13:48 ` [PATCH 6.6 25/25] gpio: omap: do not register driver in probe() Greg Kroah-Hartman
2026-02-13 18:53 ` [PATCH 6.6 00/25] 6.6.125-rc1 review Florian Fainelli
2026-02-13 19:20 ` Jon Hunter
2026-02-14 1:05 ` Peter Schneider
2026-02-14 10:49 ` Ron Economos
2026-02-14 16:02 ` Brett A C Sheffield
2026-02-15 0:03 ` Miguel Ojeda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260213134704.082657368@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=luiz.von.dentz@intel.com \
--cc=patches@lists.linux.dev \
--cc=pmenzel@molgen.mpg.de \
--cc=stable@vger.kernel.org \
--cc=zenmchen@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox