[PATCH 6.12 17/24] scsi: qla2xxx: Query FW again before proceeding with login

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

6.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anil Gurumurthy <agurumurthy@marvell.com>

commit 42b2dab4340d39b71334151e10c6d7d9b0040ffa upstream.

Issue occurred during a continuous reboot test of several thousand
iterations specific to a fabric topo with dual mode target where it
sends a PLOGI/PRLI and then sends a LOGO. The initiator was also in the
process of discovery and sent a PLOGI to the switch. It then queried a
list of ports logged in via mbx 75h and the GPDB response indicated that
the target was logged in. This caused a mismatch in the states between
the driver and FW.  Requery the FW for the state and proceed with the
rest of discovery process.

Fixes: a4239945b8ad ("scsi: qla2xxx: Add switch command to simplify fabric discovery")
Cc: stable@vger.kernel.org
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251210101604.431868-11-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/qla2xxx/qla_init.c |   19 +++++++++++++++++--
 drivers/scsi/qla2xxx/qla_isr.c  |   19 +++++++++++++++++--
 2 files changed, 34 insertions(+), 4 deletions(-)

--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2462,8 +2462,23 @@ qla24xx_handle_plogi_done_event(struct s
 	    ea->sp->gen1, fcport->rscn_gen,
 	    ea->data[0], ea->data[1], ea->iop[0], ea->iop[1]);
 
-	if ((fcport->fw_login_state == DSC_LS_PLOGI_PEND) ||
-	    (fcport->fw_login_state == DSC_LS_PRLI_PEND)) {
+	if (fcport->fw_login_state == DSC_LS_PLOGI_PEND) {
+		ql_dbg(ql_dbg_disc, vha, 0x20ea,
+		    "%s %d %8phC Remote is trying to login\n",
+		    __func__, __LINE__, fcport->port_name);
+		/*
+		 * If we get here, there is port thats already logged in,
+		 * but it's state has not moved ahead. Recheck with FW on
+		 * what state it is in and proceed ahead
+		 */
+		if (!N2N_TOPO(vha->hw)) {
+			fcport->fw_login_state = DSC_LS_PRLI_COMP;
+			qla24xx_post_gpdb_work(vha, fcport, 0);
+		}
+		return;
+	}
+
+	if (fcport->fw_login_state == DSC_LS_PRLI_PEND) {
 		ql_dbg(ql_dbg_disc, vha, 0x20ea,
 		    "%s %d %8phC Remote is trying to login\n",
 		    __func__, __LINE__, fcport->port_name);
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1676,13 +1676,28 @@ skip_rio:
 
 			/* Port logout */
 			fcport = qla2x00_find_fcport_by_loopid(vha, mb[1]);
-			if (!fcport)
+			if (!fcport) {
+				ql_dbg(ql_dbg_async, vha, 0x5011,
+					"Could not find fcport:%04x %04x %04x\n",
+					mb[1], mb[2], mb[3]);
 				break;
-			if (atomic_read(&fcport->state) != FCS_ONLINE)
+			}
+
+			if (atomic_read(&fcport->state) != FCS_ONLINE) {
+				ql_dbg(ql_dbg_async, vha, 0x5012,
+					"Port state is not online State:0x%x \n",
+					atomic_read(&fcport->state));
+				ql_dbg(ql_dbg_async, vha, 0x5012,
+					"Scheduling session for deletion \n");
+				fcport->logout_on_delete = 0;
+				qlt_schedule_sess_for_deletion(fcport);
 				break;
+			}
+
 			ql_dbg(ql_dbg_async, vha, 0x508a,
 			    "Marking port lost loopid=%04x portid=%06x.\n",
 			    fcport->loop_id, fcport->d_id.b24);
+
 			if (qla_ini_mode_enabled(vha)) {
 				fcport->logout_on_delete = 0;
 				qlt_schedule_sess_for_deletion(fcport);