public inbox for stable@vger.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: patches@lists.linux.dev, stable@vger.kernel.org
Cc: Bluecross <elantsew.andrew@gmail.com>,
	Luiz Augusto von Dentz <luiz.von.dentz@intel.com>,
	Sasha Levin <sashal@kernel.org>,
	marcel@holtmann.org, luiz.dentz@gmail.com,
	linux-bluetooth@vger.kernel.org
Subject: [PATCH AUTOSEL 6.19-6.12] Bluetooth: btusb: Add support for MediaTek7920 0489:e158
Date: Sat, 14 Feb 2026 16:23:05 -0500	[thread overview]
Message-ID: <20260214212452.782265-40-sashal@kernel.org> (raw)
In-Reply-To: <20260214212452.782265-1-sashal@kernel.org>

From: Bluecross <elantsew.andrew@gmail.com>

[ Upstream commit 2630bcc8343a9d2a38dc1793068e6754b3156811 ]

Add support for MediaTek7920 0489:e158

/sys/kernel/debug/usb/devices reports for that device:

T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e158 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Signed-off-by: Andrew Elatsev <elantsew.andrew@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---

LLM Generated explanations, may be completely bogus:

## Analysis

### Commit Message Analysis
This commit adds a new USB device ID (0489:e158) for a MediaTek MT7920
Bluetooth adapter to the `btusb` driver. The commit message includes the
full USB device descriptor dump from `/sys/kernel/debug/usb/devices`,
confirming this is a real hardware device (manufactured by MediaTek
Inc., identified as "Wireless_Device").

### Code Change Analysis
The change is a **two-line addition** to the `quirks_table[]` array in
`drivers/bluetooth/btusb.c`:

```c
{ USB_DEVICE(0x0489, 0xe158), .driver_info = BTUSB_MEDIATEK |
                                             BTUSB_WIDEBAND_SPEECH },
```

This is added in the "Additional MediaTek MT7920 Bluetooth devices"
section, alongside other MT7920 device IDs that already exist
(0x0489:0xe134, 0x0489:0xe135, 0x13d3:0x3620, 0x13d3:0x3621,
0x13d3:0x3622). The new entry uses the exact same `driver_info` flags as
all other MT7920 entries.

### Classification
This is a **new device ID addition** to an existing, well-established
driver. This falls squarely into the "NEW DEVICE IDs" exception category
that is explicitly allowed and encouraged for stable backports.

### Scope and Risk Assessment
- **Lines changed**: 2 lines added (one table entry)
- **Files touched**: 1 file (`drivers/bluetooth/btusb.c`)
- **Risk**: Essentially zero. This only adds a USB ID match entry to a
  device table. It cannot affect any other device or code path. The
  driver (btusb with MediaTek support) already exists and works for the
  other MT7920 variants.
- **Complexity**: Trivial — it's a data table entry, not logic.

### User Impact
Without this entry, users with the MediaTek MT7920 variant (vendor
0x0489, product 0xe158) have **no Bluetooth functionality at all** — the
kernel simply won't bind the btusb driver to this device. With this
entry, Bluetooth works out of the box. This is a direct hardware
enablement fix.

### Stability Indicators
- The same pattern (USB_DEVICE + BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH)
  is used by dozens of other MediaTek entries in this table, all well-
  tested.
- The commit was accepted by the Bluetooth subsystem maintainer (Luiz
  Augusto von Dentz).

### Dependencies
None. This is a self-contained, single-entry table addition with no
dependencies on other commits.

### Conclusion
This is a textbook example of a stable-worthy device ID addition:
- Trivial two-line change to an existing device table
- Zero risk of regression to any other device or code path
- Enables hardware that otherwise doesn't work at all
- Uses the exact same flags as all other MT7920 entries
- The btusb driver and MediaTek support exist in all active stable trees

**YES**

 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index ded09e94d296d..646de80c7e7be 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -637,6 +637,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3622), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe158), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Additional MediaTek MT7921 Bluetooth devices */
 	{ USB_DEVICE(0x0489, 0xe0c8), .driver_info = BTUSB_MEDIATEK |
-- 
2.51.0


  parent reply	other threads:[~2026-02-14 21:26 UTC|newest]

Thread overview: 102+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-14 21:22 [PATCH AUTOSEL 6.19-6.12] wifi: rtw89: ser: enable error IMR after recovering from L1 Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.12] wifi: ath11k: Fix failure to connect to a 6 GHz AP Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-5.10] myri10ge: avoid uninitialized variable use Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.1] wifi: rtw88: 8822b: Avoid WARNING in rtw8822b_config_trx_mode() Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.12] wifi: rtw89: 8922a: add digital compensation for 2GHz Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.18] wifi: iwlwifi: mld: Handle rate selection for NAN interface Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.18] wifi: rtw89: pci: validate sequence number of TX release report Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.1] net: mctp-i2c: fix duplicate reception of old data Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-5.15] net: hns3: extend HCLGE_FD_AD_QID to 11 bits Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-5.10] wifi: iwlegacy: add missing mutex protection in il4965_store_tx_power() Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.6] wifi: rtw88: rtw8821cu: Add ID for Mercusys MU6H Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.6] dm: replace -EEXIST with -EBUSY Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.18] driver core: faux: stop using static struct device Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.12] net: wwan: mhi: Add network support for Foxconn T99W760 Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.18] wifi: rtw89: Add support for MSI AX1800 Nano (GUAX18N) Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.18] wifi: rtw89: mcc: reset probe counter when receiving beacon Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-5.10] net/rds: Clear reconnect pending bit Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-5.10] net: usb: r8152: fix transmit queue timeout Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.18] PCI/bwctrl: Disable BW controller on Intel P45 using a quirk Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.18] wifi: rtw89: setting TBTT AGG number when mac port initialization Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-5.10] netfilter: nf_conntrack: Add allow_clash to generic protocol handler Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.18] wifi: rtw89: disable EHT protocol by chip capabilities Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.12] ipv6: annotate data-races over sysctl.flowlabel_reflect Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-5.10] iommu/arm-smmu-v3: Improve CMDQ lock fairness and efficiency Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.1] gro: change the BUG_ON() in gro_pull_from_frag0() Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-5.10] wifi: ath10k: fix lock protection in ath10k_wmi_event_peer_sta_ps_state_chg() Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.18] wifi: iwlwifi: mld: Fix primary link selection logic Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.12] wifi: cfg80211: allow only one NAN interface, also in multi radio Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.18] PCI: dwc: Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if link is not up Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.6] wifi: ath12k: fix preferred hardware mode calculation Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.1] wifi: rtw88: fix DTIM period handling when conf->dtim_period is zero Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.18] Bluetooth: hci_qca: Fix SSR (SubSystem Restart) fail when BT_EN is pulled up by hw Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-6.12] wifi: rtw89: mac: correct page number for CSI response Sasha Levin
2026-02-14 21:22 ` [PATCH AUTOSEL 6.19-5.15] ipv6: exthdrs: annotate data-race over multiple sysctl Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.12] wifi: rtw88: Fix inadvertent sharing of struct ieee80211_supported_band data Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19] wifi: rtw89: 8852au: add support for TP TX30U Plus Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.10] PCI: Mark Nvidia GB10 to avoid bus reset Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.6] wifi: ath11k: add pm quirk for Thinkpad Z13/Z16 Gen1 Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.18] Bluetooth: btusb: Add USB ID 0489:e112 for Realtek 8851BE Sasha Levin
2026-02-14 21:23 ` Sasha Levin [this message]
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19] wifi: rtw89: Add default ID 28de:2432 for RTL8832CU Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.18] wifi: ath12k: fix mac phy capability parsing Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.1] wifi: rtw89: pci: restore LDO setting after device resume Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.12] ext4: use reserved metadata blocks when splitting extent on endio Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.10] jfs: Add missing set_freezable() for freezable kthread Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.1] Bluetooth: btusb: Add new VID/PID for RTL8852CE Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.10] octeontx2-af: Workaround SQM/PSE stalls by disabling sticky Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.10] vmw_vsock: bypass false-positive Wnonnull warning with gcc-16 Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.10] wifi: iwlegacy: add missing mutex protection in il3945_store_measurement() Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.18] PCI: dwc: ep: Cache MSI outbound iATU mapping Sasha Levin
2026-02-16  1:15   ` Koichiro Den
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.10] nfc: nxp-nci: remove interrupt trigger type Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19] wifi: rtw89: Add support for D-Link VR Air Bridge (DWA-F18) Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.15] PCI/AER: Clear stale errors on reporting agents upon probe Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.10] dm: remove fake timeout to avoid leak request Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.10] PCI: Add ACS quirk for Qualcomm Hamoa & Glymur Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19] PCI: cadence: Avoid signed 64-bit truncation and invalid sort Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.18] wifi: iwlwifi: mld: fix chandef start calculation Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.6] ext4: move ext4_percpu_param_init() before ext4_mb_init() Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.6] wifi: rtw89: wow: add reason codes for disassociation in WoWLAN mode Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.15] ipv6: annotate data-races in ip6_multipath_hash_{policy,fields}() Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.6] ipv4: igmp: annotate data-races around idev->mr_maxdelay Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.15] ext4: mark group add fast-commit ineligible Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.18] wifi: iwlwifi: fix 22000 series SMEM parsing Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.10] net/rds: No shortcut out of RDS_CONN_ERROR Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.18] ipv6: annotate data-races in net/ipv6/route.c Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.6] wifi: iwlwifi: mvm: check the validity of noa_len Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.12] wifi: rtw89: fix unable to receive probe responses under MLO connection Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.10] PCI: Enable ACS after configuring IOMMU for OF platforms Sasha Levin
2026-03-18  8:21   ` Thorsten Leemhuis
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.1] PCI: dw-rockchip: Disable BAR 0 and BAR 1 for Root Port Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.18] wifi: rtw89: regd: 6 GHz power type marks default when inactive Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19] wifi: cfg80211: treat deprecated INDOOR_SP_AP_OLD control value as LPI mode Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.12] wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band() Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.6] Bluetooth: hci_conn: Set link_policy on incoming ACL connections Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.10] wifi: libertas: fix WARNING in usb_tx_block Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.10] netfilter: xt_tcpmss: check remaining length before reading optlen Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.12] bnxt_en: Allow ntuple filters for drops Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.12] ext4: propagate flags to convert_initialized_extent() Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.10] net: usb: sr9700: remove code to drive nonexistent multicast filter Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.18] ptp: ptp_vmclock: add 'VMCLOCK' to ACPI device match Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.10] jfs: nlink overflow in jfs_rename Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.10] PCI: Mark ASM1164 SATA controller to avoid bus reset Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.15] ext4: mark group extend fast-commit ineligible Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.10] openrisc: define arch-specific version of nop() Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.18] PCI: imx6: Add CLKREQ# override to enable REFCLK for i.MX95 PCIe Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.15] fsnotify: Shutdown fsnotify before destroying sb's dcache Sasha Levin
2026-02-15  8:11   ` Amir Goldstein
2026-02-17 10:00     ` Jan Kara
2026-02-26 14:09       ` Sasha Levin
2026-02-26 15:57         ` Jan Kara
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.10] ipv4: fib: Annotate access to struct fib_alias.fa_state Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.10] PCI: Fix pci_slot_lock () device locking Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.12] net: sfp: add quirk for Lantech 8330-265D Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.18] wifi: rtw89: pci: validate release report content before using for RTL8922DE Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.12] wifi: rtw89: 8922a: set random mac if efuse contains zeroes Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-5.10] Bluetooth: btusb: Add device ID for Realtek RTL8761BU Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.18] rtla: Fix NULL pointer dereference in actions_parse Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.18] wifi: rtw89: fix potential zero beacon interval in beacon tracking Sasha Levin
2026-02-14 21:23 ` [PATCH AUTOSEL 6.19-6.6] iommu/amd: move wait_on_sem() out of spinlock Sasha Levin
2026-02-16  4:27   ` Ankit Soni
2026-02-14 21:24 ` [PATCH AUTOSEL 6.19-5.10] Bluetooth: hci_conn: use mod_delayed_work for active mode timeout Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260214212452.782265-40-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=elantsew.andrew@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=luiz.dentz@gmail.com \
    --cc=luiz.von.dentz@intel.com \
    --cc=marcel@holtmann.org \
    --cc=patches@lists.linux.dev \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox