patch "iio: gyro: mpu3050-core: fix pm_runtime error handling" added to char-misc-linus

patch "iio: gyro: mpu3050-core: fix pm_runtime error handling" added to char-misc-linus

[gregkh]

This is a note to let you know that I've just added the patch titled

    iio: gyro: mpu3050-core: fix pm_runtime error handling

to my char-misc git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
in the char-misc-linus branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.

If you have any questions about this process, please let me know.


From acc3949aab3e8094641a9c7c2768de1958c88378 Mon Sep 17 00:00:00 2001
From: Antoniu Miclaus <antoniu.miclaus@analog.com>
Date: Mon, 16 Feb 2026 11:57:56 +0200
Subject: iio: gyro: mpu3050-core: fix pm_runtime error handling

The return value of pm_runtime_get_sync() is not checked, allowing
the driver to access hardware that may fail to resume. The device
usage count is also unconditionally incremented. Use
pm_runtime_resume_and_get() which propagates errors and avoids
incrementing the usage count on failure.

In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate()
failure since postdisable does not run when preenable fails.

Fixes: 3904b28efb2c ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/gyro/mpu3050-core.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/gyro/mpu3050-core.c b/drivers/iio/gyro/mpu3050-core.c
index ee2fcd20545d..317e7b217ec6 100644
--- a/drivers/iio/gyro/mpu3050-core.c
+++ b/drivers/iio/gyro/mpu3050-core.c
@@ -322,7 +322,9 @@ static int mpu3050_read_raw(struct iio_dev *indio_dev,
 		}
 	case IIO_CHAN_INFO_RAW:
 		/* Resume device */
-		pm_runtime_get_sync(mpu3050->dev);
+		ret = pm_runtime_resume_and_get(mpu3050->dev);
+		if (ret)
+			return ret;
 		mutex_lock(&mpu3050->lock);
 
 		ret = mpu3050_set_8khz_samplerate(mpu3050);
@@ -647,14 +649,20 @@ static irqreturn_t mpu3050_trigger_handler(int irq, void *p)
 static int mpu3050_buffer_preenable(struct iio_dev *indio_dev)
 {
 	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+	int ret;
 
-	pm_runtime_get_sync(mpu3050->dev);
+	ret = pm_runtime_resume_and_get(mpu3050->dev);
+	if (ret)
+		return ret;
 
 	/* Unless we have OUR trigger active, run at full speed */
-	if (!mpu3050->hw_irq_trigger)
-		return mpu3050_set_8khz_samplerate(mpu3050);
+	if (!mpu3050->hw_irq_trigger) {
+		ret = mpu3050_set_8khz_samplerate(mpu3050);
+		if (ret)
+			pm_runtime_put_autosuspend(mpu3050->dev);
+	}
 
-	return 0;
+	return ret;
 }
 
 static int mpu3050_buffer_postdisable(struct iio_dev *indio_dev)
-- 
2.53.0