From: <gregkh@linuxfoundation.org>
To: nktgrg@google.com,horms@kernel.org,hramamurthy@google.com,jordanrhee@google.com,joshwash@google.com,kuba@kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] gve: fix incorrect buffer cleanup in" failed to apply to 6.6-stable tree
Date: Mon, 09 Mar 2026 11:21:18 +0100 [thread overview]
Message-ID: <2026030918-unflawed-unmasking-3b8d@gregkh> (raw)
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x fb868db5f4bccd7a78219313ab2917429f715cea
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026030918-unflawed-unmasking-3b8d@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From fb868db5f4bccd7a78219313ab2917429f715cea Mon Sep 17 00:00:00 2001
From: Ankit Garg <nktgrg@google.com>
Date: Fri, 20 Feb 2026 13:53:24 -0800
Subject: [PATCH] gve: fix incorrect buffer cleanup in
gve_tx_clean_pending_packets for QPL
In DQ-QPL mode, gve_tx_clean_pending_packets() incorrectly uses the RDA
buffer cleanup path. It iterates num_bufs times and attempts to unmap
entries in the dma array.
This leads to two issues:
1. The dma array shares storage with tx_qpl_buf_ids (union).
Interpreting buffer IDs as DMA addresses results in attempting to
unmap incorrect memory locations.
2. num_bufs in QPL mode (counting 2K chunks) can significantly exceed
the size of the dma array, causing out-of-bounds access warnings
(trace below is how we noticed this issue).
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/drivers/net/ethernet/google/gve/gve_tx_dqo.c:178:5 index 18 is out of
range for type 'dma_addr_t[18]' (aka 'unsigned long long[18]')
Workqueue: gve gve_service_task [gve]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0xa0
__ubsan_handle_out_of_bounds+0xdc/0x110
gve_tx_stop_ring_dqo+0x182/0x200 [gve]
gve_close+0x1be/0x450 [gve]
gve_reset+0x99/0x120 [gve]
gve_service_task+0x61/0x100 [gve]
process_scheduled_works+0x1e9/0x380
Fix this by properly checking for QPL mode and delegating to
gve_free_tx_qpl_bufs() to reclaim the buffers.
Cc: stable@vger.kernel.org
Fixes: a6fb8d5a8b69 ("gve: Tx path for DQO-QPL")
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260220215324.1631350-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
diff --git a/drivers/net/ethernet/google/gve/gve_tx_dqo.c b/drivers/net/ethernet/google/gve/gve_tx_dqo.c
index 28e85730f785..b57e8f13cb51 100644
--- a/drivers/net/ethernet/google/gve/gve_tx_dqo.c
+++ b/drivers/net/ethernet/google/gve/gve_tx_dqo.c
@@ -167,6 +167,25 @@ gve_free_pending_packet(struct gve_tx_ring *tx,
}
}
+static void gve_unmap_packet(struct device *dev,
+ struct gve_tx_pending_packet_dqo *pkt)
+{
+ int i;
+
+ if (!pkt->num_bufs)
+ return;
+
+ /* SKB linear portion is guaranteed to be mapped */
+ dma_unmap_single(dev, dma_unmap_addr(pkt, dma[0]),
+ dma_unmap_len(pkt, len[0]), DMA_TO_DEVICE);
+ for (i = 1; i < pkt->num_bufs; i++) {
+ netmem_dma_unmap_page_attrs(dev, dma_unmap_addr(pkt, dma[i]),
+ dma_unmap_len(pkt, len[i]),
+ DMA_TO_DEVICE, 0);
+ }
+ pkt->num_bufs = 0;
+}
+
/* gve_tx_free_desc - Cleans up all pending tx requests and buffers.
*/
static void gve_tx_clean_pending_packets(struct gve_tx_ring *tx)
@@ -176,21 +195,12 @@ static void gve_tx_clean_pending_packets(struct gve_tx_ring *tx)
for (i = 0; i < tx->dqo.num_pending_packets; i++) {
struct gve_tx_pending_packet_dqo *cur_state =
&tx->dqo.pending_packets[i];
- int j;
- for (j = 0; j < cur_state->num_bufs; j++) {
- if (j == 0) {
- dma_unmap_single(tx->dev,
- dma_unmap_addr(cur_state, dma[j]),
- dma_unmap_len(cur_state, len[j]),
- DMA_TO_DEVICE);
- } else {
- dma_unmap_page(tx->dev,
- dma_unmap_addr(cur_state, dma[j]),
- dma_unmap_len(cur_state, len[j]),
- DMA_TO_DEVICE);
- }
- }
+ if (tx->dqo.qpl)
+ gve_free_tx_qpl_bufs(tx, cur_state);
+ else
+ gve_unmap_packet(tx->dev, cur_state);
+
if (cur_state->skb) {
dev_consume_skb_any(cur_state->skb);
cur_state->skb = NULL;
@@ -1157,22 +1167,6 @@ static void remove_from_list(struct gve_tx_ring *tx,
}
}
-static void gve_unmap_packet(struct device *dev,
- struct gve_tx_pending_packet_dqo *pkt)
-{
- int i;
-
- /* SKB linear portion is guaranteed to be mapped */
- dma_unmap_single(dev, dma_unmap_addr(pkt, dma[0]),
- dma_unmap_len(pkt, len[0]), DMA_TO_DEVICE);
- for (i = 1; i < pkt->num_bufs; i++) {
- netmem_dma_unmap_page_attrs(dev, dma_unmap_addr(pkt, dma[i]),
- dma_unmap_len(pkt, len[i]),
- DMA_TO_DEVICE, 0);
- }
- pkt->num_bufs = 0;
-}
-
/* Completion types and expected behavior:
* No Miss compl + Packet compl = Packet completed normally.
* Miss compl + Re-inject compl = Packet completed normally.
next reply other threads:[~2026-03-09 10:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-09 10:21 gregkh [this message]
2026-03-09 13:00 ` [PATCH 6.6.y] gve: fix incorrect buffer cleanup in gve_tx_clean_pending_packets for QPL Sasha Levin
2026-03-09 13:26 ` Ankit Garg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026030918-unflawed-unmasking-3b8d@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=horms@kernel.org \
--cc=hramamurthy@google.com \
--cc=jordanrhee@google.com \
--cc=joshwash@google.com \
--cc=kuba@kernel.org \
--cc=nktgrg@google.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox