public inbox for stable@vger.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Kevin Hao <haokexin@gmail.com>,
	Quanyang Wang <quanyang.wang@windriver.com>,
	Simon Horman <horms@kernel.org>, Jakub Kicinski <kuba@kernel.org>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.18.y 2/2] net: macb: Shuffle the tx ring before enabling tx
Date: Wed, 18 Mar 2026 10:59:56 -0400	[thread overview]
Message-ID: <20260318145956.858944-2-sashal@kernel.org> (raw)
In-Reply-To: <20260318145956.858944-1-sashal@kernel.org>

From: Kevin Hao <haokexin@gmail.com>

[ Upstream commit 881a0263d502e1a93ebc13a78254e9ad19520232 ]

Quanyang observed that when using an NFS rootfs on an AMD ZynqMp board,
the rootfs may take an extended time to recover after a suspend.
Upon investigation, it was determined that the issue originates from a
problem in the macb driver.

According to the Zynq UltraScale TRM [1], when transmit is disabled,
the transmit buffer queue pointer resets to point to the address
specified by the transmit buffer queue base address register.

In the current implementation, the code merely resets `queue->tx_head`
and `queue->tx_tail` to '0'. This approach presents several issues:

- Packets already queued in the tx ring are silently lost,
  leading to memory leaks since the associated skbs cannot be released.

- Concurrent write access to `queue->tx_head` and `queue->tx_tail` may
  occur from `macb_tx_poll()` or `macb_start_xmit()` when these values
  are reset to '0'.

- The transmission may become stuck on a packet that has already been sent
  out, with its 'TX_USED' bit set, but has not yet been processed. However,
  due to the manipulation of 'queue->tx_head' and 'queue->tx_tail',
  `macb_tx_poll()` incorrectly assumes there are no packets to handle
  because `queue->tx_head == queue->tx_tail`. This issue is only resolved
  when a new packet is placed at this position. This is the root cause of
  the prolonged recovery time observed for the NFS root filesystem.

To resolve this issue, shuffle the tx ring and tx skb array so that
the first unsent packet is positioned at the start of the tx ring.
Additionally, ensure that updates to `queue->tx_head` and
`queue->tx_tail` are properly protected with the appropriate lock.

[1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trm

Fixes: bf9cf80cab81 ("net: macb: Fix tx/rx malfunction after phy link down and up")
Reported-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260307-zynqmp-v2-1-6ef98a70e1d0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cadence/macb_main.c | 98 +++++++++++++++++++++++-
 1 file changed, 95 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index f168469f7a58c..35d258048aa0e 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -37,6 +37,7 @@
 #include <linux/tcp.h>
 #include <linux/types.h>
 #include <linux/udp.h>
+#include <linux/gcd.h>
 #include <net/pkt_sched.h>
 #include "macb.h"
 
@@ -705,6 +706,97 @@ static void macb_mac_link_down(struct phylink_config *config, unsigned int mode,
 	netif_tx_stop_all_queues(ndev);
 }
 
+/* Use juggling algorithm to left rotate tx ring and tx skb array */
+static void gem_shuffle_tx_one_ring(struct macb_queue *queue)
+{
+	unsigned int head, tail, count, ring_size, desc_size;
+	struct macb_tx_skb tx_skb, *skb_curr, *skb_next;
+	struct macb_dma_desc *desc_curr, *desc_next;
+	unsigned int i, cycles, shift, curr, next;
+	struct macb *bp = queue->bp;
+	unsigned char desc[24];
+	unsigned long flags;
+
+	desc_size = macb_dma_desc_get_size(bp);
+
+	if (WARN_ON_ONCE(desc_size > ARRAY_SIZE(desc)))
+		return;
+
+	spin_lock_irqsave(&queue->tx_ptr_lock, flags);
+	head = queue->tx_head;
+	tail = queue->tx_tail;
+	ring_size = bp->tx_ring_size;
+	count = CIRC_CNT(head, tail, ring_size);
+
+	if (!(tail % ring_size))
+		goto unlock;
+
+	if (!count) {
+		queue->tx_head = 0;
+		queue->tx_tail = 0;
+		goto unlock;
+	}
+
+	shift = tail % ring_size;
+	cycles = gcd(ring_size, shift);
+
+	for (i = 0; i < cycles; i++) {
+		memcpy(&desc, macb_tx_desc(queue, i), desc_size);
+		memcpy(&tx_skb, macb_tx_skb(queue, i),
+		       sizeof(struct macb_tx_skb));
+
+		curr = i;
+		next = (curr + shift) % ring_size;
+
+		while (next != i) {
+			desc_curr = macb_tx_desc(queue, curr);
+			desc_next = macb_tx_desc(queue, next);
+
+			memcpy(desc_curr, desc_next, desc_size);
+
+			if (next == ring_size - 1)
+				desc_curr->ctrl &= ~MACB_BIT(TX_WRAP);
+			if (curr == ring_size - 1)
+				desc_curr->ctrl |= MACB_BIT(TX_WRAP);
+
+			skb_curr = macb_tx_skb(queue, curr);
+			skb_next = macb_tx_skb(queue, next);
+			memcpy(skb_curr, skb_next, sizeof(struct macb_tx_skb));
+
+			curr = next;
+			next = (curr + shift) % ring_size;
+		}
+
+		desc_curr = macb_tx_desc(queue, curr);
+		memcpy(desc_curr, &desc, desc_size);
+		if (i == ring_size - 1)
+			desc_curr->ctrl &= ~MACB_BIT(TX_WRAP);
+		if (curr == ring_size - 1)
+			desc_curr->ctrl |= MACB_BIT(TX_WRAP);
+		memcpy(macb_tx_skb(queue, curr), &tx_skb,
+		       sizeof(struct macb_tx_skb));
+	}
+
+	queue->tx_head = count;
+	queue->tx_tail = 0;
+
+	/* Make descriptor updates visible to hardware */
+	wmb();
+
+unlock:
+	spin_unlock_irqrestore(&queue->tx_ptr_lock, flags);
+}
+
+/* Rotate the queue so that the tail is at index 0 */
+static void gem_shuffle_tx_rings(struct macb *bp)
+{
+	struct macb_queue *queue;
+	int q;
+
+	for (q = 0, queue = bp->queues; q < bp->num_queues; q++, queue++)
+		gem_shuffle_tx_one_ring(queue);
+}
+
 static void macb_mac_link_up(struct phylink_config *config,
 			     struct phy_device *phy,
 			     unsigned int mode, phy_interface_t interface,
@@ -743,8 +835,6 @@ static void macb_mac_link_up(struct phylink_config *config,
 			ctrl |= MACB_BIT(PAE);
 
 		for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue) {
-			queue->tx_head = 0;
-			queue->tx_tail = 0;
 			queue_writel(queue, IER,
 				     bp->rx_intr_mask | MACB_TX_INT_FLAGS | MACB_BIT(HRESP));
 		}
@@ -758,8 +848,10 @@ static void macb_mac_link_up(struct phylink_config *config,
 
 	spin_unlock_irqrestore(&bp->lock, flags);
 
-	if (!(bp->caps & MACB_CAPS_MACB_IS_EMAC))
+	if (!(bp->caps & MACB_CAPS_MACB_IS_EMAC)) {
 		macb_set_tx_clk(bp, speed);
+		gem_shuffle_tx_rings(bp);
+	}
 
 	/* Enable Rx and Tx; Enable PTP unicast */
 	ctrl = macb_readl(bp, NCR);
-- 
2.51.0


      reply	other threads:[~2026-03-18 15:00 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-17 12:07 FAILED: patch "[PATCH] net: macb: Shuffle the tx ring before enabling tx" failed to apply to 6.18-stable tree gregkh
2026-03-18 14:59 ` [PATCH 6.18.y 1/2] net: macb: sort #includes Sasha Levin
2026-03-18 14:59   ` Sasha Levin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260318145956.858944-2-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=haokexin@gmail.com \
    --cc=horms@kernel.org \
    --cc=kuba@kernel.org \
    --cc=quanyang.wang@windriver.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox