From: Steven Rostedt <rostedt@kernel.org>
To: linux-kernel@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
Andrew Morton <akpm@linux-foundation.org>,
stable@vger.kernel.org
Subject: [for-linus][PATCH 2/5] tracing: Fix failure to read user space from system call trace events
Date: Sat, 21 Mar 2026 23:09:56 -0400 [thread overview]
Message-ID: <20260322031010.191529722@kernel.org> (raw)
In-Reply-To: 20260322030954.198361547@kernel.org
From: Steven Rostedt <rostedt@goodmis.org>
The system call trace events call trace_user_fault_read() to read the user
space part of some system calls. This is done by grabbing a per-cpu
buffer, disabling migration, enabling preemption, calling
copy_from_user(), disabling preemption, enabling migration and checking if
the task was preempted while preemption was enabled. If it was, the buffer
is considered corrupted and it tries again.
There's a safety mechanism that will fail out of this loop if it fails 100
times (with a warning). That warning message was triggered in some
pi_futex stress tests. Enabling the sched_switch trace event and
traceoff_on_warning, showed the problem:
pi_mutex_hammer-1375 [006] d..21 138.981648: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981651: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981656: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981659: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981664: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981667: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981671: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981675: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981679: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981682: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981687: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981690: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981695: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981698: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981703: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981706: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981711: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981714: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981719: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981722: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981727: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981730: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981735: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981738: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
What happened was the task 1375 was flagged to be migrated. When
preemption was enabled, the migration thread woke up to migrate that task,
but failed because migration for that task was disabled. This caused the
loop to fail to exit because the task scheduled out while trying to read
user space.
Every time the task enabled preemption the migration thread would schedule
in, try to migrate the task, fail and let the task continue. But because
the loop would only enable preemption with migration disabled, it would
always fail because each time it enabled preemption to read user space,
the migration thread would try to migrate it.
To solve this, when the loop fails to read user space without being
scheduled out, enabled and disable preemption with migration enabled. This
will allow the migration task to successfully migrate the task and the
next loop should succeed to read user space without being scheduled out.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260316130734.1858a998@gandalf.local.home
Fixes: 64cf7d058a005 ("tracing: Have trace_marker use per-cpu data to read user space")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
---
kernel/trace/trace.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index ebd996f8710e..bb4a62f4b953 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -6783,6 +6783,23 @@ char *trace_user_fault_read(struct trace_user_buf_info *tinfo,
*/
do {
+ /*
+ * It is possible that something is trying to migrate this
+ * task. What happens then, is when preemption is enabled,
+ * the migration thread will preempt this task, try to
+ * migrate it, fail, then let it run again. That will
+ * cause this to loop again and never succeed.
+ * On failures, enabled and disable preemption with
+ * migration enabled, to allow the migration thread to
+ * migrate this task.
+ */
+ if (trys) {
+ preempt_enable_notrace();
+ preempt_disable_notrace();
+ cpu = smp_processor_id();
+ buffer = per_cpu_ptr(tinfo->tbuf, cpu)->buf;
+ }
+
/*
* If for some reason, copy_from_user() always causes a context
* switch, this would then cause an infinite loop.
--
2.51.0
next parent reply other threads:[~2026-03-22 3:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20260322030954.198361547@kernel.org>
2026-03-22 3:09 ` Steven Rostedt [this message]
2026-03-22 3:09 ` [for-linus][PATCH 3/5] tracing: Fix trace_marker copy link list updates Steven Rostedt
2026-03-22 3:09 ` [for-linus][PATCH 4/5] ring-buffer: Fix to update per-subbuf entries of persistent ring buffer Steven Rostedt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260322031010.191529722@kernel.org \
--to=rostedt@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mathieu.desnoyers@efficios.com \
--cc=mhiramat@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox