[PATCH 6.6.y 1/3] rust: pin-init: add references to previously initialized fields

[Benno Lossin <lossin@kernel.org>]

[ Upstream commit 42415d163e5df6db799c7de6262d707e402c2c7e ]

After initializing a field in an initializer macro, create a variable
holding a reference that points at that field. The type is either
`Pin<&mut T>` or `&mut T` depending on the field's structural pinning
kind.

[ Applied fixes to devres and rust_driver_pci sample - Benno]
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Benno Lossin <lossin@kernel.org>
[ Removed the devres changes, because devres is not present in 6.12.y and
  earlier. Also adjusted paths in the macro to account for the fact that
  pin-init is part of the kernel crate in 6.12.y and earlier. - Benno ]
Signed-off-by: Benno Lossin <lossin@kernel.org>
---
 rust/kernel/init/macros.rs | 144 +++++++++++++++++++++++++++++--------
 1 file changed, 113 insertions(+), 31 deletions(-)

diff --git a/rust/kernel/init/macros.rs b/rust/kernel/init/macros.rs
index cb769a09e742..427875371682 100644
--- a/rust/kernel/init/macros.rs
+++ b/rust/kernel/init/macros.rs
@@ -964,35 +964,54 @@ fn drop(&mut self) {
         @pinned($($(#[$($p_attr:tt)*])* $pvis:vis $p_field:ident : $p_type:ty),* $(,)?),
         @not_pinned($($(#[$($attr:tt)*])* $fvis:vis $field:ident : $type:ty),* $(,)?),
     ) => {
-        // For every field, we create a projection function according to its projection type. If a
-        // field is structurally pinned, then it must be initialized via `PinInit`, if it is not
-        // structurally pinned, then it can be initialized via `Init`.
-        //
-        // The functions are `unsafe` to prevent accidentally calling them.
-        #[allow(dead_code)]
-        impl<$($impl_generics)*> $pin_data<$($ty_generics)*>
-        where $($whr)*
-        {
-            $(
-                $(#[$($p_attr)*])*
-                $pvis unsafe fn $p_field<E>(
-                    self,
-                    slot: *mut $p_type,
-                    init: impl $crate::init::PinInit<$p_type, E>,
-                ) -> ::core::result::Result<(), E> {
-                    unsafe { $crate::init::PinInit::__pinned_init(init, slot) }
-                }
-            )*
-            $(
-                $(#[$($attr)*])*
-                $fvis unsafe fn $field<E>(
-                    self,
-                    slot: *mut $type,
-                    init: impl $crate::init::Init<$type, E>,
-                ) -> ::core::result::Result<(), E> {
-                    unsafe { $crate::init::Init::__init(init, slot) }
-                }
-            )*
+        $crate::macros::paste! {
+            // For every field, we create a projection function according to its projection type. If a
+            // field is structurally pinned, then it must be initialized via `PinInit`, if it is not
+            // structurally pinned, then it can be initialized via `Init`.
+            //
+            // The functions are `unsafe` to prevent accidentally calling them.
+            #[allow(dead_code, non_snake_case)]
+            #[expect(clippy::missing_safety_doc)]
+            impl<$($impl_generics)*> $pin_data<$($ty_generics)*>
+            where $($whr)*
+            {
+                $(
+                    $(#[$($p_attr)*])*
+                    $pvis unsafe fn $p_field<E>(
+                        self,
+                        slot: *mut $p_type,
+                        init: impl $crate::init::PinInit<$p_type, E>,
+                    ) -> ::core::result::Result<(), E> {
+                        unsafe { $crate::init::PinInit::__pinned_init(init, slot) }
+                    }
+
+                    $(#[$($p_attr)*])*
+                    $pvis unsafe fn [<__project_ $p_field>]<'__slot>(
+                        self,
+                        slot: &'__slot mut $p_type,
+                    ) -> ::core::pin::Pin<&'__slot mut $p_type> {
+                        unsafe { ::core::pin::Pin::new_unchecked(slot) }
+                    }
+                )*
+                $(
+                    $(#[$($attr)*])*
+                    $fvis unsafe fn $field<E>(
+                        self,
+                        slot: *mut $type,
+                        init: impl $crate::init::Init<$type, E>,
+                    ) -> ::core::result::Result<(), E> {
+                        unsafe { $crate::init::Init::__init(init, slot) }
+                    }
+
+                    $(#[$($attr)*])*
+                    $fvis unsafe fn [<__project_ $field>]<'__slot>(
+                        self,
+                        slot: &'__slot mut $type,
+                    ) -> &'__slot mut $type {
+                        slot
+                    }
+                )*
+            }
         }
     };
 }
@@ -1186,6 +1205,13 @@ fn assert_zeroable<T: $crate::init::Zeroable>(_: *mut T) {}
         // return when an error/panic occurs.
         // We also use the `data` to require the correct trait (`Init` or `PinInit`) for `$field`.
         unsafe { $data.$field(::core::ptr::addr_of_mut!((*$slot).$field), init)? };
+        // SAFETY:
+        // - the project function does the correct field projection,
+        // - the field has been initialized,
+        // - the reference is only valid until the end of the initializer.
+        #[allow(unused_variables, unused_assignments)]
+        let $field = $crate::macros::paste!(unsafe { $data.[< __project_ $field >](&mut (*$slot).$field) });
+
         // Create the drop guard:
         //
         // We rely on macro hygiene to make it impossible for users to access this local variable.
@@ -1217,6 +1243,14 @@ fn assert_zeroable<T: $crate::init::Zeroable>(_: *mut T) {}
         // SAFETY: `slot` is valid, because we are inside of an initializer closure, we
         // return when an error/panic occurs.
         unsafe { $crate::init::Init::__init(init, ::core::ptr::addr_of_mut!((*$slot).$field))? };
+
+        // SAFETY:
+        // - the field is not structurally pinned, since the line above must compile,
+        // - the field has been initialized,
+        // - the reference is only valid until the end of the initializer.
+        #[allow(unused_variables, unused_assignments)]
+        let $field = unsafe { &mut (*$slot).$field };
+
         // Create the drop guard:
         //
         // We rely on macro hygiene to make it impossible for users to access this local variable.
@@ -1235,7 +1269,7 @@ fn assert_zeroable<T: $crate::init::Zeroable>(_: *mut T) {}
             );
         }
     };
-    (init_slot($($use_data:ident)?):
+    (init_slot(): // No `use_data`, so all fields are not structurally pinned
         @data($data:ident),
         @slot($slot:ident),
         @guards($($guards:ident,)*),
@@ -1249,6 +1283,15 @@ fn assert_zeroable<T: $crate::init::Zeroable>(_: *mut T) {}
             // SAFETY: The memory at `slot` is uninitialized.
             unsafe { ::core::ptr::write(::core::ptr::addr_of_mut!((*$slot).$field), $field) };
         }
+
+        #[allow(unused_variables, unused_assignments)]
+        // SAFETY:
+        // - the field is not structurally pinned, since no `use_data` was required to create this
+        //   initializer,
+        // - the field has been initialized,
+        // - the reference is only valid until the end of the initializer.
+        let $field = unsafe { &mut (*$slot).$field };
+
         // Create the drop guard:
         //
         // We rely on macro hygiene to make it impossible for users to access this local variable.
@@ -1259,7 +1302,46 @@ fn assert_zeroable<T: $crate::init::Zeroable>(_: *mut T) {}
                 $crate::init::__internal::DropGuard::new(::core::ptr::addr_of_mut!((*$slot).$field))
             };
 
-            $crate::__init_internal!(init_slot($($use_data)?):
+            $crate::__init_internal!(init_slot():
+                @data($data),
+                @slot($slot),
+                @guards([< __ $field _guard >], $($guards,)*),
+                @munch_fields($($rest)*),
+            );
+        }
+    };
+    (init_slot($use_data:ident):
+        @data($data:ident),
+        @slot($slot:ident),
+        @guards($($guards:ident,)*),
+        // Init by-value.
+        @munch_fields($field:ident $(: $val:expr)?, $($rest:tt)*),
+    ) => {
+        {
+            $(let $field = $val;)?
+            // Initialize the field.
+            //
+            // SAFETY: The memory at `slot` is uninitialized.
+            unsafe { ::core::ptr::write(::core::ptr::addr_of_mut!((*$slot).$field), $field) };
+        }
+        // SAFETY:
+        // - the project function does the correct field projection,
+        // - the field has been initialized,
+        // - the reference is only valid until the end of the initializer.
+        #[allow(unused_variables, unused_assignments)]
+        let $field = $crate::macros::paste!(unsafe { $data.[< __project_ $field >](&mut (*$slot).$field) });
+
+        // Create the drop guard:
+        //
+        // We rely on macro hygiene to make it impossible for users to access this local variable.
+        // We use `paste!` to create new hygiene for `$field`.
+        $crate::macros::paste! {
+            // SAFETY: We forget the guard later when initialization has succeeded.
+            let [< __ $field _guard >] = unsafe {
+                $crate::init::__internal::DropGuard::new(::core::ptr::addr_of_mut!((*$slot).$field))
+            };
+
+            $crate::__init_internal!(init_slot($use_data):
                 @data($data),
                 @slot($slot),
                 @guards([<$field>], $($guards,)*),

base-commit: c09fbcd31ae6d71e7c69545839bec92d8e15c13b
-- 
2.53.0