* [PATCH 1/4] mmc: vub300: fix NULL-deref on disconnect
[not found] <20260327105208.1310739-1-johan@kernel.org>
@ 2026-03-27 10:52 ` Johan Hovold
2026-03-27 10:52 ` [PATCH 2/4] mmc: vub300: fix use-after-free " Johan Hovold
1 sibling, 0 replies; 2+ messages in thread
From: Johan Hovold @ 2026-03-27 10:52 UTC (permalink / raw)
To: Ulf Hansson; +Cc: linux-mmc, linux-kernel, Johan Hovold, stable, Tony Olech
Make sure to deregister the controller before dropping the reference to
the driver data on disconnect to avoid NULL-pointer dereferences or
use-after-free.
Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Cc: stable@vger.kernel.org # 3.0
Cc: Tony Olech <tony.olech@elandigitalsystems.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/mmc/host/vub300.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
index ff49d0770506..f173c7cf4e1a 100644
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -2365,8 +2365,8 @@ static void vub300_disconnect(struct usb_interface *interface)
usb_set_intfdata(interface, NULL);
/* prevent more I/O from starting */
vub300->interface = NULL;
- kref_put(&vub300->kref, vub300_delete);
mmc_remove_host(mmc);
+ kref_put(&vub300->kref, vub300_delete);
pr_info("USB vub300 remote SDIO host controller[%d]"
" now disconnected", ifnum);
return;
--
2.52.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH 2/4] mmc: vub300: fix use-after-free on disconnect
[not found] <20260327105208.1310739-1-johan@kernel.org>
2026-03-27 10:52 ` [PATCH 1/4] mmc: vub300: fix NULL-deref on disconnect Johan Hovold
@ 2026-03-27 10:52 ` Johan Hovold
1 sibling, 0 replies; 2+ messages in thread
From: Johan Hovold @ 2026-03-27 10:52 UTC (permalink / raw)
To: Ulf Hansson; +Cc: linux-mmc, linux-kernel, Johan Hovold, stable, Binbin Zhou
The vub300 driver maintains an explicit reference count for the
controller and its driver data and the last reference can in theory be
dropped after the driver has been unbound.
This specifically means that the controller allocation must not be
device managed as that can lead to use-after-free.
Note that the lifetime is currently also incorrectly tied the parent USB
device rather than interface, which can lead to memory leaks if the
driver is unbound without its device being physically disconnected (e.g.
on probe deferral).
Fix both issues by reverting to non-managed allocation of the controller.
Fixes: dcfdd698dc52 ("mmc: vub300: Use devm_mmc_alloc_host() helper")
Cc: stable@vger.kernel.org # 6.17
Cc: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/mmc/host/vub300.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
index f173c7cf4e1a..3c9df27f9fa7 100644
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -369,11 +369,14 @@ struct vub300_mmc_host {
static void vub300_delete(struct kref *kref)
{ /* kref callback - softirq */
struct vub300_mmc_host *vub300 = kref_to_vub300_mmc_host(kref);
+ struct mmc_host *mmc = vub300->mmc;
+
usb_free_urb(vub300->command_out_urb);
vub300->command_out_urb = NULL;
usb_free_urb(vub300->command_res_urb);
vub300->command_res_urb = NULL;
usb_put_dev(vub300->udev);
+ mmc_free_host(mmc);
/*
* and hence also frees vub300
* which is contained at the end of struct mmc
@@ -2112,7 +2115,7 @@ static int vub300_probe(struct usb_interface *interface,
goto error1;
}
/* this also allocates memory for our VUB300 mmc host device */
- mmc = devm_mmc_alloc_host(&udev->dev, sizeof(*vub300));
+ mmc = mmc_alloc_host(sizeof(*vub300), &udev->dev);
if (!mmc) {
retval = -ENOMEM;
dev_err(&udev->dev, "not enough memory for the mmc_host\n");
@@ -2269,7 +2272,7 @@ static int vub300_probe(struct usb_interface *interface,
dev_err(&vub300->udev->dev,
"Could not find two sets of bulk-in/out endpoint pairs\n");
retval = -EINVAL;
- goto error4;
+ goto err_free_host;
}
retval =
usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
@@ -2278,14 +2281,14 @@ static int vub300_probe(struct usb_interface *interface,
0x0000, 0x0000, &vub300->hc_info,
sizeof(vub300->hc_info), 1000);
if (retval < 0)
- goto error4;
+ goto err_free_host;
retval =
usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
SET_ROM_WAIT_STATES,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
firmware_rom_wait_states, 0x0000, NULL, 0, 1000);
if (retval < 0)
- goto error4;
+ goto err_free_host;
dev_info(&vub300->udev->dev,
"operating_mode = %s %s %d MHz %s %d byte USB packets\n",
(mmc->caps & MMC_CAP_SDIO_IRQ) ? "IRQs" : "POLL",
@@ -2300,7 +2303,7 @@ static int vub300_probe(struct usb_interface *interface,
0x0000, 0x0000, &vub300->system_port_status,
sizeof(vub300->system_port_status), 1000);
if (retval < 0) {
- goto error4;
+ goto err_free_host;
} else if (sizeof(vub300->system_port_status) == retval) {
vub300->card_present =
(0x0001 & vub300->system_port_status.port_flags) ? 1 : 0;
@@ -2308,7 +2311,7 @@ static int vub300_probe(struct usb_interface *interface,
(0x0010 & vub300->system_port_status.port_flags) ? 1 : 0;
} else {
retval = -EINVAL;
- goto error4;
+ goto err_free_host;
}
usb_set_intfdata(interface, vub300);
INIT_DELAYED_WORK(&vub300->pollwork, vub300_pollwork_thread);
@@ -2338,6 +2341,8 @@ static int vub300_probe(struct usb_interface *interface,
return 0;
error6:
timer_delete_sync(&vub300->inactivity_timer);
+err_free_host:
+ mmc_free_host(mmc);
/*
* and hence also frees vub300
* which is contained at the end of struct mmc
--
2.52.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-03-27 10:52 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20260327105208.1310739-1-johan@kernel.org>
2026-03-27 10:52 ` [PATCH 1/4] mmc: vub300: fix NULL-deref on disconnect Johan Hovold
2026-03-27 10:52 ` [PATCH 2/4] mmc: vub300: fix use-after-free " Johan Hovold
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox