From: "Pradhan, Sanman" <sanman.pradhan@hpe.com>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: "yangyicong@hisilicon.com" <yangyicong@hisilicon.com>,
"jonathan.cameron@huawei.com" <jonathan.cameron@huawei.com>,
"alexander.shishkin@linux.intel.com"
<alexander.shishkin@linux.intel.com>,
Sanman Pradhan <psanman@juniper.net>,
"stable@vger.kernel.org" <stable@vger.kernel.org>
Subject: [PATCH 1/2] hwtracing: hisi_ptt: Propagate DMA reset timeout in trace_start()
Date: Thu, 9 Apr 2026 01:07:36 +0000 [thread overview]
Message-ID: <20260409010704.383882-2-sanman.pradhan@hpe.com> (raw)
In-Reply-To: <20260409010704.383882-1-sanman.pradhan@hpe.com>
From: Sanman Pradhan <psanman@juniper.net>
hisi_ptt_wait_dma_reset_done() discards the return value of
readl_poll_timeout_atomic(). If the DMA engine does not complete its
reset within the timeout, hisi_ptt_trace_start() proceeds to start
tracing regardless.
Return the poll result from hisi_ptt_wait_dma_reset_done() and
propagate it from hisi_ptt_trace_start(). Deassert the reset bit
before returning on timeout, preserving the existing reset cleanup
sequence. Move ctrl->started to the successful path so a failed start
does not leave the trace marked as active.
Fixes: ff0de066b463 ("hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
---
drivers/hwtracing/ptt/hisi_ptt.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/hwtracing/ptt/hisi_ptt.c b/drivers/hwtracing/ptt/hisi_ptt.c
index 94c371c491357..73b93df8504c4 100644
--- a/drivers/hwtracing/ptt/hisi_ptt.c
+++ b/drivers/hwtracing/ptt/hisi_ptt.c
@@ -171,13 +171,13 @@ static bool hisi_ptt_wait_trace_hw_idle(struct hisi_ptt *hisi_ptt)
HISI_PTT_WAIT_TRACE_TIMEOUT_US);
}
-static void hisi_ptt_wait_dma_reset_done(struct hisi_ptt *hisi_ptt)
+static int hisi_ptt_wait_dma_reset_done(struct hisi_ptt *hisi_ptt)
{
u32 val;
- readl_poll_timeout_atomic(hisi_ptt->iobase + HISI_PTT_TRACE_WR_STS,
- val, !val, HISI_PTT_RESET_POLL_INTERVAL_US,
- HISI_PTT_RESET_TIMEOUT_US);
+ return readl_poll_timeout_atomic(hisi_ptt->iobase + HISI_PTT_TRACE_WR_STS,
+ val, !val, HISI_PTT_RESET_POLL_INTERVAL_US,
+ HISI_PTT_RESET_TIMEOUT_US);
}
static void hisi_ptt_trace_end(struct hisi_ptt *hisi_ptt)
@@ -194,6 +194,7 @@ static int hisi_ptt_trace_start(struct hisi_ptt *hisi_ptt)
{
struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
u32 val;
+ int ret;
int i;
/* Check device idle before start trace */
@@ -202,19 +203,21 @@ static int hisi_ptt_trace_start(struct hisi_ptt *hisi_ptt)
return -EBUSY;
}
- ctrl->started = true;
-
/* Reset the DMA before start tracing */
val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
val |= HISI_PTT_TRACE_CTRL_RST;
writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
- hisi_ptt_wait_dma_reset_done(hisi_ptt);
+ ret = hisi_ptt_wait_dma_reset_done(hisi_ptt);
+ /* De-assert reset regardless of whether the wait timed out */
val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
val &= ~HISI_PTT_TRACE_CTRL_RST;
writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
+ if (ret)
+ return ret;
+
/* Reset the index of current buffer */
hisi_ptt->trace_ctrl.buf_index = 0;
@@ -234,6 +237,8 @@ static int hisi_ptt_trace_start(struct hisi_ptt *hisi_ptt)
if (!hisi_ptt->trace_ctrl.is_port)
val |= HISI_PTT_TRACE_CTRL_FILTER_MODE;
+ ctrl->started = true;
+
/* Start the Trace */
val |= HISI_PTT_TRACE_CTRL_EN;
writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
--
2.34.1
next parent reply other threads:[~2026-04-09 1:08 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20260409010704.383882-1-sanman.pradhan@hpe.com>
2026-04-09 1:07 ` Pradhan, Sanman [this message]
2026-04-13 16:17 ` [PATCH 1/2] hwtracing: hisi_ptt: Propagate DMA reset timeout in trace_start() Yicong Yang
2026-04-14 16:24 ` Pradhan, Sanman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260409010704.383882-2-sanman.pradhan@hpe.com \
--to=sanman.pradhan@hpe.com \
--cc=alexander.shishkin@linux.intel.com \
--cc=jonathan.cameron@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=psanman@juniper.net \
--cc=stable@vger.kernel.org \
--cc=yangyicong@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox