[PATCH 4/6] gpib: Add ines_pci_xl_interface

Dave Penkler
2026-04-11T17:25:44Z

Add new interface initialisation struct for 72130 based boards.

It is basically the same as the ines_pci_interface apart from the
name, attach and line_status fields.

Signed-off-by: Dave Penkler <dpenkler@gmail.com>
---
drivers/gpib/ines/ines_gpib.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)

diff --git a/drivers/gpib/ines/ines_gpib.c b/drivers/gpib/ines/ines_gpib.c
index df299a9d7f4d..118e6c7b0ff1 100644
--- a/drivers/gpib/ines/ines_gpib.c
+++ b/drivers/gpib/ines/ines_gpib.c
@@ -603,6 +603,34 @@ static struct gpib_interface ines_pci_unaccel_interface = {
.return_to_local = ines_return_to_local,
};

+static struct gpib_interface ines_pci_xl_interface = {
+ .name = "ines_pci_xl",
+ .attach = ines_pci_xl_attach,
+ .detach = ines_pci_detach,
+ .read = ines_read,
+ .write = ines_write,
+ .command = ines_command,
+ .take_control = ines_take_control,
+ .go_to_standby = ines_go_to_standby,
+ .request_system_control = ines_request_system_control,
+ .interface_clear = ines_interface_clear,
+ .remote_enable = ines_remote_enable,
+ .enable_eos = ines_enable_eos,
+ .disable_eos = ines_disable_eos,
+ .parallel_poll = ines_parallel_poll,
+ .parallel_poll_configure = ines_parallel_poll_configure,
+ .parallel_poll_response = ines_parallel_poll_response,
+ .local_parallel_poll_mode = NULL, // XXX
+ .line_status = ines72130_line_status,
+ .update_status = ines_update_status,
+ .primary_address = ines_primary_address,
+ .secondary_address = ines_secondary_address,
+ .serial_poll_response = ines_serial_poll_response,
+ .serial_poll_status = ines_serial_poll_status,
+ .t1_delay = ines_t1_delay,
+ .return_to_local = ines_return_to_local,
+};
+
static struct gpib_interface ines_pci_interface = {
.name = "ines_pci",
.attach = ines_pci_accel_attach,
--
2.53.0