[PATCH 5.15.y 4/4] arm64: dts: imx8mq-librem5: Bump BUCK1 suspend voltage up to 0.85V

[Sasha Levin <sashal@kernel.org>]

From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>

[ Upstream commit 511f76bf1dce5acf8907b65a7d1bc8f7e7c0d637 ]

The minimal voltage of VDD_SOC sourced from BUCK1 is 0.81V, which
is the currently set value. However, BD71837 only guarantees accuracy
of ±0.01V, and this still doesn't factor other reasons for actual
voltage to slightly drop in, resulting in the possibility of running
out of the operational range.

Bump the voltage up to 0.85V, which should give enough headroom.

Cc: stable@vger.kernel.org
Fixes: 8f0216b006e5 ("arm64: dts: Add a device tree for the Librem 5 phone")
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index ce63d5ef67665..2260ae8dc1a23 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -706,7 +706,7 @@ buck1_reg: BUCK1 {
 				regulator-ramp-delay = <1250>;
 				rohm,dvs-run-voltage = <900000>;
 				rohm,dvs-idle-voltage = <850000>;
-				rohm,dvs-suspend-voltage = <810000>;
+				rohm,dvs-suspend-voltage = <850000>;
 				regulator-always-on;
 			};
 
-- 
2.53.0