[PATCH 6.1 40/55] arm64: dts: hisilicon: poplar: Correct PCIe reset GPIO polarity

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shawn Guo <shawnguo@kernel.org>

commit c1f2b0f2b5e37b2c27540a175aea2755a3799433 upstream.

The PCIe reset GPIO on Poplar is actually active low.  The active high
worked before because kernel driver didn't respect the setting from DT.
This is changed since commit 1d26a55fbeb9 ("PCI: histb: Switch to using
gpiod API"), and thus PCIe on Poplar got brken since then.

Fix the problem by correcting the polarity.

Fixes: 32fa01761bd9 ("arm64: dts: hi3798cv200: enable PCIe support for poplar board")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
@@ -179,7 +179,7 @@
 };
 
 &pcie {
-	reset-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_pcie>;
 	status = "okay";
 };