[PATCH 5.15 199/570] NFC: nxp-nci: allow GPIOs to sleep

Greg Kroah-Hartman
2026-04-13T16:28:02Z

From: Ian Ray <ian.ray@gehealthcare.com>

commit 55dc632ab2ac2889b15995a9eef56c753d48ebc7 upstream.

Allow the firmware and enable GPIOs to sleep.

This fixes a `WARN_ON' and allows the driver to operate GPIOs which are
connected to I2C GPIO expanders.

-- >8 --
kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98
-- >8 --

Fixes: 43201767b44c ("NFC: nxp-nci: Convert to use GPIO descriptor")
Cc: stable@vger.kernel.org
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Link: https://patch.msgid.link/20260317085337.146545-1-ian.ray@gehealthcare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/nfc/nxp-nci/i2c.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/nfc/nxp-nci/i2c.c
+++ b/drivers/nfc/nxp-nci/i2c.c
@@ -47,8 +47,8 @@ static int nxp_nci_i2c_set_mode(void *ph
{
struct nxp_nci_i2c_phy *phy = (struct nxp_nci_i2c_phy *) phy_id;

- gpiod_set_value(phy->gpiod_fw, (mode == NXP_NCI_MODE_FW) ? 1 : 0);
- gpiod_set_value(phy->gpiod_en, (mode != NXP_NCI_MODE_COLD) ? 1 : 0);
+ gpiod_set_value_cansleep(phy->gpiod_fw, (mode == NXP_NCI_MODE_FW) ? 1 : 0);
+ gpiod_set_value_cansleep(phy->gpiod_en, (mode != NXP_NCI_MODE_COLD) ? 1 : 0);
usleep_range(10000, 15000);

if (mode == NXP_NCI_MODE_COLD)