From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: "Jouni Högander" <jouni.hogander@intel.com>,
"Mika Kahola" <mika.kahola@intel.com>,
"Joonas Lahtinen" <joonas.lahtinen@linux.intel.com>,
"Sasha Levin" <sashal@kernel.org>
Subject: [PATCH 6.1.y] drm/i915/psr: Do not use pipe_src as borders for SU area
Date: Mon, 13 Apr 2026 14:59:00 -0400 [thread overview]
Message-ID: <20260413185900.3429717-1-sashal@kernel.org> (raw)
In-Reply-To: <2026041314-laundry-reformer-de94@gregkh>
From: Jouni Högander <jouni.hogander@intel.com>
[ Upstream commit 75519f5df2a9b23f7bf305e12dc9a6e3e65c24b7 ]
This far using crtc_state->pipe_src as borders for Selective Update area
haven't caused visible problems as drm_rect_width(crtc_state->pipe_src) ==
crtc_state->hw.adjusted_mode.crtc_hdisplay and
drm_rect_height(crtc_state->pipe_src) ==
crtc_state->hw.adjusted_mode.crtc_vdisplay when pipe scaling is not
used. On the other hand using pipe scaling is forcing full frame updates and all the
Selective Update area calculations are skipped. Now this improper usage of
crtc_state->pipe_src is causing following warnings:
<4> [7771.978166] xe 0000:00:02.0: [drm] drm_WARN_ON_ONCE(su_lines % vdsc_cfg->slice_height)
after WARN_ON_ONCE was added by commit:
"drm/i915/dsc: Add helper for writing DSC Selective Update ET parameters"
These warnings are seen when DSC and pipe scaling are enabled
simultaneously. This is because on full frame update SU area is improperly
set as pipe_src which is not aligned with DSC slice height.
Fix these by creating local rectangle using
crtc_state->hw.adjusted_mode.crtc_hdisplay and
crtc_state->hw.adjusted_mode.crtc_vdisplay. Use this local rectangle as
borders for SU area.
Fixes: d6774b8c3c58 ("drm/i915: Ensure damage clip area is within pipe area")
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patch.msgid.link/20260327114553.195285-1-jouni.hogander@intel.com
(cherry picked from commit da0cdc1c329dd2ff09c41fbbe9fbd9c92c5d2c6e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[ omitted hunks for DSC selective update ET alignment infrastructure ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/i915/display/intel_psr.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
index e2d7c0a6802aa..a465b19293108 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.c
+++ b/drivers/gpu/drm/i915/display/intel_psr.c
@@ -1686,9 +1686,9 @@ static void psr2_man_trk_ctl_calc(struct intel_crtc_state *crtc_state,
static void clip_area_update(struct drm_rect *overlap_damage_area,
struct drm_rect *damage_area,
- struct drm_rect *pipe_src)
+ struct drm_rect *display_area)
{
- if (!drm_rect_intersect(damage_area, pipe_src))
+ if (!drm_rect_intersect(damage_area, display_area))
return;
if (overlap_damage_area->y1 == -1) {
@@ -1761,6 +1761,12 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
struct drm_rect pipe_clip = { .x1 = 0, .y1 = -1, .x2 = INT_MAX, .y2 = -1 };
struct intel_plane_state *new_plane_state, *old_plane_state;
struct intel_plane *plane;
+ struct drm_rect display_area = {
+ .x1 = 0,
+ .y1 = 0,
+ .x2 = crtc_state->hw.adjusted_mode.crtc_hdisplay,
+ .y2 = crtc_state->hw.adjusted_mode.crtc_vdisplay,
+ };
bool full_update = false;
int i, ret;
@@ -1807,14 +1813,14 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
damaged_area.y1 = old_plane_state->uapi.dst.y1;
damaged_area.y2 = old_plane_state->uapi.dst.y2;
clip_area_update(&pipe_clip, &damaged_area,
- &crtc_state->pipe_src);
+ &display_area);
}
if (new_plane_state->uapi.visible) {
damaged_area.y1 = new_plane_state->uapi.dst.y1;
damaged_area.y2 = new_plane_state->uapi.dst.y2;
clip_area_update(&pipe_clip, &damaged_area,
- &crtc_state->pipe_src);
+ &display_area);
}
continue;
} else if (new_plane_state->uapi.alpha != old_plane_state->uapi.alpha) {
@@ -1822,7 +1828,7 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
damaged_area.y1 = new_plane_state->uapi.dst.y1;
damaged_area.y2 = new_plane_state->uapi.dst.y2;
clip_area_update(&pipe_clip, &damaged_area,
- &crtc_state->pipe_src);
+ &display_area);
continue;
}
@@ -1838,7 +1844,7 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
damaged_area.x1 += new_plane_state->uapi.dst.x1 - src.x1;
damaged_area.x2 += new_plane_state->uapi.dst.x1 - src.x1;
- clip_area_update(&pipe_clip, &damaged_area, &crtc_state->pipe_src);
+ clip_area_update(&pipe_clip, &damaged_area, &display_area);
}
/*
--
2.53.0
prev parent reply other threads:[~2026-04-13 18:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-13 12:16 FAILED: patch "[PATCH] drm/i915/psr: Do not use pipe_src as borders for SU area" failed to apply to 6.1-stable tree gregkh
2026-04-13 18:59 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260413185900.3429717-1-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=joonas.lahtinen@linux.intel.com \
--cc=jouni.hogander@intel.com \
--cc=mika.kahola@intel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox