From: <gregkh@linuxfoundation.org>
To: tpluszz77@gmail.com,fw@strlen.de,steffen.klassert@secunet.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] xfrm: hold dev ref until after transport_finish NF_HOOK" failed to apply to 6.12-stable tree
Date: Mon, 13 Apr 2026 14:09:50 +0200 [thread overview]
Message-ID: <2026041350-debunk-desktop-efbf@gregkh> (raw)
The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x 1c428b03840094410c5fb6a5db30640486bbbfcb
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026041350-debunk-desktop-efbf@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 1c428b03840094410c5fb6a5db30640486bbbfcb Mon Sep 17 00:00:00 2001
From: Qi Tang <tpluszz77@gmail.com>
Date: Thu, 2 Apr 2026 19:44:01 +0800
Subject: [PATCH] xfrm: hold dev ref until after transport_finish NF_HOOK
After async crypto completes, xfrm_input_resume() calls dev_put()
immediately on re-entry before the skb reaches transport_finish.
The skb->dev pointer is then used inside NF_HOOK and its okfn,
which can race with device teardown.
Remove the dev_put from the async resumption entry and instead
drop the reference after the NF_HOOK call in transport_finish,
using a saved device pointer since NF_HOOK may consume the skb.
This covers NF_DROP, NF_QUEUE and NF_STOLEN paths that skip
the okfn.
For non-transport exits (decaps, gro, drop) and secondary
async return points, release the reference inline when
async is set.
Suggested-by: Florian Westphal <fw@strlen.de>
Fixes: acf568ee859f ("xfrm: Reinject transport-mode packets through tasklet")
Cc: stable@vger.kernel.org
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
diff --git a/net/ipv4/xfrm4_input.c b/net/ipv4/xfrm4_input.c
index f28cfd88eaf5..c2eac844bcdb 100644
--- a/net/ipv4/xfrm4_input.c
+++ b/net/ipv4/xfrm4_input.c
@@ -50,6 +50,7 @@ int xfrm4_transport_finish(struct sk_buff *skb, int async)
{
struct xfrm_offload *xo = xfrm_offload(skb);
struct iphdr *iph = ip_hdr(skb);
+ struct net_device *dev = skb->dev;
iph->protocol = XFRM_MODE_SKB_CB(skb)->protocol;
@@ -73,8 +74,10 @@ int xfrm4_transport_finish(struct sk_buff *skb, int async)
}
NF_HOOK(NFPROTO_IPV4, NF_INET_PRE_ROUTING,
- dev_net(skb->dev), NULL, skb, skb->dev, NULL,
+ dev_net(dev), NULL, skb, dev, NULL,
xfrm4_rcv_encap_finish);
+ if (async)
+ dev_put(dev);
return 0;
}
diff --git a/net/ipv6/xfrm6_input.c b/net/ipv6/xfrm6_input.c
index 9005fc156a20..699a001ac166 100644
--- a/net/ipv6/xfrm6_input.c
+++ b/net/ipv6/xfrm6_input.c
@@ -43,6 +43,7 @@ static int xfrm6_transport_finish2(struct net *net, struct sock *sk,
int xfrm6_transport_finish(struct sk_buff *skb, int async)
{
struct xfrm_offload *xo = xfrm_offload(skb);
+ struct net_device *dev = skb->dev;
int nhlen = -skb_network_offset(skb);
skb_network_header(skb)[IP6CB(skb)->nhoff] =
@@ -68,8 +69,10 @@ int xfrm6_transport_finish(struct sk_buff *skb, int async)
}
NF_HOOK(NFPROTO_IPV6, NF_INET_PRE_ROUTING,
- dev_net(skb->dev), NULL, skb, skb->dev, NULL,
+ dev_net(dev), NULL, skb, dev, NULL,
xfrm6_transport_finish2);
+ if (async)
+ dev_put(dev);
return 0;
}
diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c
index dc1312ed5a09..f65291eba1f6 100644
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
@@ -506,7 +506,6 @@ int xfrm_input(struct sk_buff *skb, int nexthdr, __be32 spi, int encap_type)
/* An encap_type of -1 indicates async resumption. */
if (encap_type == -1) {
async = 1;
- dev_put(skb->dev);
seq = XFRM_SKB_CB(skb)->seq.input.low;
spin_lock(&x->lock);
goto resume;
@@ -659,8 +658,11 @@ int xfrm_input(struct sk_buff *skb, int nexthdr, __be32 spi, int encap_type)
dev_hold(skb->dev);
nexthdr = x->type->input(x, skb);
- if (nexthdr == -EINPROGRESS)
+ if (nexthdr == -EINPROGRESS) {
+ if (async)
+ dev_put(skb->dev);
return 0;
+ }
dev_put(skb->dev);
spin_lock(&x->lock);
@@ -695,9 +697,11 @@ int xfrm_input(struct sk_buff *skb, int nexthdr, __be32 spi, int encap_type)
XFRM_MODE_SKB_CB(skb)->protocol = nexthdr;
err = xfrm_inner_mode_input(x, skb);
- if (err == -EINPROGRESS)
+ if (err == -EINPROGRESS) {
+ if (async)
+ dev_put(skb->dev);
return 0;
- else if (err) {
+ } else if (err) {
XFRM_INC_STATS(net, LINUX_MIB_XFRMINSTATEMODEERROR);
goto drop;
}
@@ -734,6 +738,8 @@ int xfrm_input(struct sk_buff *skb, int nexthdr, __be32 spi, int encap_type)
sp->olen = 0;
if (skb_valid_dst(skb))
skb_dst_drop(skb);
+ if (async)
+ dev_put(skb->dev);
gro_cells_receive(&gro_cells, skb);
return 0;
} else {
@@ -753,6 +759,8 @@ int xfrm_input(struct sk_buff *skb, int nexthdr, __be32 spi, int encap_type)
sp->olen = 0;
if (skb_valid_dst(skb))
skb_dst_drop(skb);
+ if (async)
+ dev_put(skb->dev);
gro_cells_receive(&gro_cells, skb);
return err;
}
@@ -763,6 +771,8 @@ int xfrm_input(struct sk_buff *skb, int nexthdr, __be32 spi, int encap_type)
drop_unlock:
spin_unlock(&x->lock);
drop:
+ if (async)
+ dev_put(skb->dev);
xfrm_rcv_cb(skb, family, x && x->type ? x->type->proto : nexthdr, -1);
kfree_skb(skb);
return 0;
reply other threads:[~2026-04-13 12:09 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026041350-debunk-desktop-efbf@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=fw@strlen.de \
--cc=stable@vger.kernel.org \
--cc=steffen.klassert@secunet.com \
--cc=tpluszz77@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox