From: Rand Deeb <rand.sec96@gmail.com>
To: stable@vger.kernel.org
Cc: axboe@kernel.dk, linux-ide@vger.kernel.org,
linux-kernel@vger.kernel.org, deeb.rand@confident.ru,
lvc-project@linuxtesting.org, khoroshilov@ispras.ru,
Sergey Shtylyov <s.shtylyov@omp.ru>,
Damien Le Moal <damien.lemoal@opensource.wdc.com>,
Rand Deeb <rand.sec96@gmail.com>
Subject: [PATCH 5.10.y] ata: pata_sil680: fix result type of sil680_sel{dev|reg}()
Date: Mon, 20 Apr 2026 01:23:55 +0300 [thread overview]
Message-ID: <20260419222355.5842-1-rand.sec96@gmail.com> (raw)
From: Sergey Shtylyov <s.shtylyov@omp.ru>
[ Upstream commit dafbbf5c57dd6ae01d20b894bc2200e9d9834c4e ]
sil680_sel{dev|reg}() return a PCI config space address but needlessly
use the *unsigned long* type for that, whereas the PCI config space
accessors take *int* for the address parameter. Switch these functions
to returning *int*, updating the local variables at their call sites.
Get rid of the 'base' local variables in these functions, while at it...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
---
drivers/ata/pata_sil680.c | 30 +++++++++++++-----------------
1 file changed, 13 insertions(+), 17 deletions(-)
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 7ab9aea3b..fe60f884b 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -47,11 +47,9 @@
* criticial.
*/
-static unsigned long sil680_selreg(struct ata_port *ap, int r)
+static int sil680_selreg(struct ata_port *ap, int r)
{
- unsigned long base = 0xA0 + r;
- base += (ap->port_no << 4);
- return base;
+ return 0xA0 + (ap->port_no << 4) + r;
}
/**
@@ -64,12 +62,9 @@ static unsigned long sil680_selreg(struct ata_port *ap, int r)
* the unit shift.
*/
-static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r)
+static int sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r)
{
- unsigned long base = 0xA0 + r;
- base += (ap->port_no << 4);
- base |= adev->devno ? 2 : 0;
- return base;
+ return 0xA0 + (ap->port_no << 4) + r + (adev->devno << 1);
}
@@ -84,8 +79,9 @@ static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev,
static int sil680_cable_detect(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- unsigned long addr = sil680_selreg(ap, 0);
+ int addr = sil680_selreg(ap, 0);
u8 ata66;
+
pci_read_config_byte(pdev, addr, &ata66);
if (ata66 & 1)
return ATA_CBL_PATA80;
@@ -112,9 +108,9 @@ static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1
};
- unsigned long tfaddr = sil680_selreg(ap, 0x02);
- unsigned long addr = sil680_seldev(ap, adev, 0x04);
- unsigned long addr_mask = 0x80 + 4 * ap->port_no;
+ int tfaddr = sil680_selreg(ap, 0x02);
+ int addr = sil680_seldev(ap, adev, 0x04);
+ int addr_mask = 0x80 + 4 * ap->port_no;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int pio = adev->pio_mode - XFER_PIO_0;
int lowest_pio = pio;
@@ -164,9 +160,9 @@ static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev)
static const u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 };
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- unsigned long ma = sil680_seldev(ap, adev, 0x08);
- unsigned long ua = sil680_seldev(ap, adev, 0x0C);
- unsigned long addr_mask = 0x80 + 4 * ap->port_no;
+ int ma = sil680_seldev(ap, adev, 0x08);
+ int ua = sil680_seldev(ap, adev, 0x0C);
+ int addr_mask = 0x80 + 4 * ap->port_no;
int port_shift = adev->devno * 4;
u8 scsc, mode;
u16 multi, ultra;
@@ -219,7 +215,7 @@ static void sil680_sff_exec_command(struct ata_port *ap,
static bool sil680_sff_irq_check(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- unsigned long addr = sil680_selreg(ap, 1);
+ int addr = sil680_selreg(ap, 1);
u8 val;
pci_read_config_byte(pdev, addr, &val);
--
2.43.0
next reply other threads:[~2026-04-19 22:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-19 22:23 Rand Deeb [this message]
2026-04-20 13:10 ` [PATCH 5.10.y] ata: pata_sil680: fix result type of sil680_sel{dev|reg}() Sergey Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260419222355.5842-1-rand.sec96@gmail.com \
--to=rand.sec96@gmail.com \
--cc=axboe@kernel.dk \
--cc=damien.lemoal@opensource.wdc.com \
--cc=deeb.rand@confident.ru \
--cc=khoroshilov@ispras.ru \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lvc-project@linuxtesting.org \
--cc=s.shtylyov@omp.ru \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox