[PATCH v4 2/5] phy: qcom: edp: Add eDP/DP mode switch support

[Yongxing Mou <yongxing.mou@oss.qualcomm.com>]

The eDP PHY supports both eDP/DP modes, each requires a different table.
The current driver doesn't support both modes and use either the eDP or
DP table when enable the platform. Add a separate set of tables for eDP
and DP modes, and select the appropriate table based on the current mode.

Glymur's DP mode table differs from the other platforms, add a dedicated
table for it.

Since both modes are supported, so also fixes the table mismatch for
X1E80100(eDP) and SA8775P(DP).

Cc: stable@vger.kernel.org
Fixes: 3f12bf16213c ("phy: qcom: edp: Add support for eDP PHY on SA8775P")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-edp.c | 46 +++++++++++++++++++++++++++----------
 1 file changed, 34 insertions(+), 12 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index 2af3fd63832f..3266026cfe37 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -87,7 +87,8 @@ struct qcom_edp_phy_cfg {
 	bool is_edp;
 	const u8 *aux_cfg;
 	const u8 *vco_div_cfg;
-	const struct qcom_edp_swing_pre_emph_cfg *swing_pre_emph_cfg;
+	const struct qcom_edp_swing_pre_emph_cfg *dp_swing_pre_emph_cfg;
+	const struct qcom_edp_swing_pre_emph_cfg *edp_swing_pre_emph_cfg;
 	const struct phy_ver_ops *ver_ops;
 };
 
@@ -150,6 +151,20 @@ static const struct qcom_edp_swing_pre_emph_cfg dp_phy_swing_pre_emph_cfg = {
 	.pre_emphasis_hbr3_hbr2 = &dp_pre_emp_hbr2_hbr3,
 };
 
+static const u8 dp_pre_emp_hbr_rbr_v8[4][4] = {
+	{ 0x00, 0x0e, 0x15, 0x1a },
+	{ 0x00, 0x0e, 0x15, 0xff },
+	{ 0x00, 0x0e, 0xff, 0xff },
+	{ 0x00, 0xff, 0xff, 0xff }
+};
+
+static const struct qcom_edp_swing_pre_emph_cfg dp_phy_swing_pre_emph_cfg_v8 = {
+	.swing_hbr_rbr = &dp_swing_hbr_rbr,
+	.swing_hbr3_hbr2 = &dp_swing_hbr2_hbr3,
+	.pre_emphasis_hbr_rbr = &dp_pre_emp_hbr_rbr_v8,
+	.pre_emphasis_hbr3_hbr2 = &dp_pre_emp_hbr2_hbr3,
+};
+
 static const u8 edp_swing_hbr_rbr[4][4] = {
 	{ 0x07, 0x0f, 0x16, 0x1f },
 	{ 0x0d, 0x16, 0x1e, 0xff },
@@ -246,7 +261,7 @@ static int qcom_edp_phy_init(struct phy *phy)
 	 * when more information becomes available about why this is
 	 * even needed.
 	 */
-	if (edp->cfg->swing_pre_emph_cfg && !edp->is_edp)
+	if (edp->cfg->dp_swing_pre_emph_cfg && !edp->is_edp)
 		aux_cfg[8] = 0xb7;
 
 	writel(0xfc, edp->edp + DP_PHY_MODE);
@@ -270,7 +285,7 @@ static int qcom_edp_phy_init(struct phy *phy)
 
 static int qcom_edp_set_voltages(struct qcom_edp *edp, const struct phy_configure_opts_dp *dp_opts)
 {
-	const struct qcom_edp_swing_pre_emph_cfg *cfg = edp->cfg->swing_pre_emph_cfg;
+	const struct qcom_edp_swing_pre_emph_cfg *cfg;
 	unsigned int v_level = 0;
 	unsigned int p_level = 0;
 	u8 ldo_config;
@@ -278,12 +293,14 @@ static int qcom_edp_set_voltages(struct qcom_edp *edp, const struct phy_configur
 	u8 emph;
 	int i;
 
+	if (edp->is_edp)
+		cfg = edp->cfg->edp_swing_pre_emph_cfg;
+	else
+		cfg = edp->cfg->dp_swing_pre_emph_cfg;
+
 	if (!cfg)
 		return 0;
 
-	if (edp->is_edp)
-		cfg = &edp_phy_swing_pre_emph_cfg;
-
 	for (i = 0; i < dp_opts->lanes; i++) {
 		v_level = max(v_level, dp_opts->voltage[i]);
 		p_level = max(p_level, dp_opts->pre[i]);
@@ -543,7 +560,8 @@ static const struct qcom_edp_phy_cfg sa8775p_dp_phy_cfg = {
 	.is_edp = false,
 	.aux_cfg = edp_phy_aux_cfg_v5,
 	.vco_div_cfg = edp_phy_vco_div_cfg_v4,
-	.swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
+	.dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
+	.edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
 	.ver_ops = &qcom_edp_phy_ops_v4,
 };
 
@@ -556,7 +574,8 @@ static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = {
 static const struct qcom_edp_phy_cfg sc8280xp_dp_phy_cfg = {
 	.aux_cfg = edp_phy_aux_cfg_v4,
 	.vco_div_cfg = edp_phy_vco_div_cfg_v4,
-	.swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
+	.dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
+	.edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
 	.ver_ops = &qcom_edp_phy_ops_v4,
 };
 
@@ -564,7 +583,8 @@ static const struct qcom_edp_phy_cfg sc8280xp_edp_phy_cfg = {
 	.is_edp = true,
 	.aux_cfg = edp_phy_aux_cfg_v4,
 	.vco_div_cfg = edp_phy_vco_div_cfg_v4,
-	.swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
+	.dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
+	.edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
 	.ver_ops = &qcom_edp_phy_ops_v4,
 };
 
@@ -745,7 +765,8 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v6 = {
 static struct qcom_edp_phy_cfg x1e80100_phy_cfg = {
 	.aux_cfg = edp_phy_aux_cfg_v4,
 	.vco_div_cfg = edp_phy_vco_div_cfg_v4,
-	.swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
+	.dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
+	.edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
 	.ver_ops = &qcom_edp_phy_ops_v6,
 };
 
@@ -924,7 +945,8 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v8 = {
 static struct qcom_edp_phy_cfg glymur_phy_cfg = {
 	.aux_cfg = edp_phy_aux_cfg_v8,
 	.vco_div_cfg = edp_phy_vco_div_cfg_v8,
-	.swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
+	.dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg_v8,
+	.edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
 	.ver_ops = &qcom_edp_phy_ops_v8,
 };
 
@@ -942,7 +964,7 @@ static int qcom_edp_phy_power_on(struct phy *phy)
 	if (ret)
 		return ret;
 
-	if (edp->cfg->swing_pre_emph_cfg && !edp->is_edp)
+	if (edp->cfg->edp_swing_pre_emph_cfg && !edp->is_edp)
 		ldo_config = 0x1;
 
 	writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG);

-- 
2.43.0