From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Li Zetao <lizetao1@huawei.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Mark Brown <broonie@kernel.org>, Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.1.y 2/3] spi: microchip-core-qspi: Use helper function devm_clk_get_enabled()
Date: Thu, 14 May 2026 14:50:13 -0400 [thread overview]
Message-ID: <20260514185014.948789-2-sashal@kernel.org> (raw)
In-Reply-To: <20260514185014.948789-1-sashal@kernel.org>
From: Li Zetao <lizetao1@huawei.com>
[ Upstream commit e922f3fff21445117e9196bd8e940ad8e15ca8c7 ]
Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
replaced by devm_clk_get_enabled() when driver enables (and possibly
prepares) the clocks for the whole lifetime of the device. Moreover, it is
no longer necessary to unprepare and disable the clocks explicitly.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20230823133938.1359106-18-lizetao1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: e6464140d439 ("spi: microchip-core-qspi: fix controller deregistration")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-microchip-core-qspi.c | 29 +++++++--------------------
1 file changed, 7 insertions(+), 22 deletions(-)
diff --git a/drivers/spi/spi-microchip-core-qspi.c b/drivers/spi/spi-microchip-core-qspi.c
index 32a0fa4ba50f7..0e44683d5ab5e 100644
--- a/drivers/spi/spi-microchip-core-qspi.c
+++ b/drivers/spi/spi-microchip-core-qspi.c
@@ -519,30 +519,23 @@ static int mchp_coreqspi_probe(struct platform_device *pdev)
return dev_err_probe(&pdev->dev, PTR_ERR(qspi->regs),
"failed to map registers\n");
- qspi->clk = devm_clk_get(&pdev->dev, NULL);
+ qspi->clk = devm_clk_get_enabled(&pdev->dev, NULL);
if (IS_ERR(qspi->clk))
return dev_err_probe(&pdev->dev, PTR_ERR(qspi->clk),
"could not get clock\n");
- ret = clk_prepare_enable(qspi->clk);
- if (ret)
- return dev_err_probe(&pdev->dev, ret,
- "failed to enable clock\n");
-
init_completion(&qspi->data_completion);
mutex_init(&qspi->op_lock);
qspi->irq = platform_get_irq(pdev, 0);
- if (qspi->irq < 0) {
- ret = qspi->irq;
- goto out;
- }
+ if (qspi->irq < 0)
+ return qspi->irq;
ret = devm_request_irq(&pdev->dev, qspi->irq, mchp_coreqspi_isr,
IRQF_SHARED, pdev->name, qspi);
if (ret) {
dev_err(&pdev->dev, "request_irq failed %d\n", ret);
- goto out;
+ return ret;
}
ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
@@ -553,18 +546,11 @@ static int mchp_coreqspi_probe(struct platform_device *pdev)
ctlr->dev.of_node = np;
ret = devm_spi_register_controller(&pdev->dev, ctlr);
- if (ret) {
- dev_err_probe(&pdev->dev, ret,
- "spi_register_controller failed\n");
- goto out;
- }
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret,
+ "spi_register_controller failed\n");
return 0;
-
-out:
- clk_disable_unprepare(qspi->clk);
-
- return ret;
}
static void mchp_coreqspi_remove(struct platform_device *pdev)
@@ -575,7 +561,6 @@ static void mchp_coreqspi_remove(struct platform_device *pdev)
mchp_coreqspi_disable_ints(qspi);
control &= ~CONTROL_ENABLE;
writel_relaxed(control, qspi->regs + REG_CONTROL);
- clk_disable_unprepare(qspi->clk);
}
static const struct of_device_id mchp_coreqspi_of_match[] = {
--
2.53.0
next prev parent reply other threads:[~2026-05-14 18:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-12 13:47 FAILED: patch "[PATCH] spi: microchip-core-qspi: fix controller deregistration" failed to apply to 6.1-stable tree gregkh
2026-05-14 18:50 ` [PATCH 6.1.y 1/3] spi: microchip-core-qspi: Convert to platform remove callback returning void Sasha Levin
2026-05-14 18:50 ` Sasha Levin [this message]
2026-05-14 18:50 ` [PATCH 6.1.y 3/3] spi: microchip-core-qspi: fix controller deregistration Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260514185014.948789-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=broonie@kernel.org \
--cc=lizetao1@huawei.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox