Linux kernel -stable discussions
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: johan@kernel.org,broonie@kernel.org,d-gole@ti.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] spi: cadence-quadspi: fix runtime pm and clock imbalance on" failed to apply to 6.12-stable tree
Date: Fri, 15 May 2026 10:34:17 +0200	[thread overview]
Message-ID: <2026051517-uncover-unpicked-ee05@gregkh> (raw)


The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x 5e8bb0cc72f1d52d8ac2a88f4c952e2e98056aed
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026051517-uncover-unpicked-ee05@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 5e8bb0cc72f1d52d8ac2a88f4c952e2e98056aed Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Tue, 21 Apr 2026 14:53:52 +0200
Subject: [PATCH] spi: cadence-quadspi: fix runtime pm and clock imbalance on
 unbind

Make sure to balance the runtime PM usage count before returning on
probe failure (to allow the controller to suspend after a probe
deferral) and to only drop the usage count on driver unbind to avoid a
clock disable imbalance.

Also restore the autosuspend setting.

Fixes: 0578a6dbfe75 ("spi: spi-cadence-quadspi: add runtime pm support")
Cc: stable@vger.kernel.org	# 6.7
Cc: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260421125354.1534871-5-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index 9ccfdc8c36fe..057381e56a7f 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -1860,10 +1860,6 @@ static int cqspi_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return -ENXIO;
 
-	ret = pm_runtime_set_active(dev);
-	if (ret)
-		return ret;
-
 	ret = clk_bulk_prepare_enable(CLK_QSPI_NUM, cqspi->clks);
 	if (ret) {
 		dev_err(dev, "Cannot enable QSPI clocks.\n");
@@ -1962,10 +1958,11 @@ static int cqspi_probe(struct platform_device *pdev)
 	cqspi->sclk = 0;
 
 	if (!(ddata && (ddata->quirks & CQSPI_DISABLE_RUNTIME_PM))) {
-		pm_runtime_enable(dev);
 		pm_runtime_set_autosuspend_delay(dev, CQSPI_AUTOSUSPEND_TIMEOUT);
 		pm_runtime_use_autosuspend(dev);
 		pm_runtime_get_noresume(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
 	}
 
 	host->num_chipselect = cqspi->num_chipselect;
@@ -1996,8 +1993,12 @@ static int cqspi_probe(struct platform_device *pdev)
 	if (cqspi->rx_chan)
 		dma_release_channel(cqspi->rx_chan);
 disable_rpm:
-	if (!(ddata && (ddata->quirks & CQSPI_DISABLE_RUNTIME_PM)))
+	if (!(ddata && (ddata->quirks & CQSPI_DISABLE_RUNTIME_PM))) {
 		pm_runtime_disable(dev);
+		pm_runtime_set_suspended(dev);
+		pm_runtime_put_noidle(dev);
+		pm_runtime_dont_use_autosuspend(dev);
+	}
 	cqspi_controller_enable(cqspi, 0);
 disable_clks:
 	clk_bulk_disable_unprepare(CLK_QSPI_NUM, cqspi->clks);
@@ -2033,8 +2034,10 @@ static void cqspi_remove(struct platform_device *pdev)
 	}
 
 	if (!(ddata && (ddata->quirks & CQSPI_DISABLE_RUNTIME_PM))) {
-		pm_runtime_put_sync(&pdev->dev);
 		pm_runtime_disable(&pdev->dev);
+		pm_runtime_set_suspended(&pdev->dev);
+		pm_runtime_put_noidle(&pdev->dev);
+		pm_runtime_dont_use_autosuspend(&pdev->dev);
 	}
 }
 


                 reply	other threads:[~2026-05-15  8:34 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2026051517-uncover-unpicked-ee05@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=broonie@kernel.org \
    --cc=d-gole@ti.com \
    --cc=johan@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox