FAILED: patch "[PATCH] usb: dwc3: xilinx: fix error handling in zynqmp init error" failed to apply to 6.18-stable tree

[<gregkh@linuxfoundation.org>]

The patch below does not apply to the 6.18-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.18.y
git checkout FETCH_HEAD
git cherry-pick -x c1a0ecbf32c4b397353204e2ec94c5bb9f3300ed
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026060414-tropics-tamer-a0df@gregkh' --subject-prefix 'PATCH 6.18.y' HEAD^..

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From c1a0ecbf32c4b397353204e2ec94c5bb9f3300ed Mon Sep 17 00:00:00 2001
From: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Date: Tue, 19 May 2026 17:25:29 +0530
Subject: [PATCH] usb: dwc3: xilinx: fix error handling in zynqmp init error
 paths

Fix error handling and resource cleanup i.e remove invalid
phy_exit() after failed phy_init(), route failures through
proper cleanup paths and return 0 explicitly on success.

Fixes: 84770f028fab ("usb: dwc3: Add driver for Xilinx platforms")
Cc: stable@vger.kernel.org
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20260519115529.2980421-1-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/dwc3/dwc3-xilinx.c b/drivers/usb/dwc3/dwc3-xilinx.c
index f41b0da5e89d..9b9525592a85 100644
--- a/drivers/usb/dwc3/dwc3-xilinx.c
+++ b/drivers/usb/dwc3/dwc3-xilinx.c
@@ -184,15 +184,13 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
 	}
 
 	ret = phy_init(priv_data->usb3_phy);
-	if (ret < 0) {
-		phy_exit(priv_data->usb3_phy);
+	if (ret < 0)
 		goto err;
-	}
 
 	ret = reset_control_deassert(apbrst);
 	if (ret < 0) {
 		dev_err(dev, "Failed to release APB reset\n");
-		goto err;
+		goto err_phy_exit;
 	}
 
 	if (priv_data->usb3_phy) {
@@ -208,26 +206,24 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
 	ret = reset_control_deassert(crst);
 	if (ret < 0) {
 		dev_err(dev, "Failed to release core reset\n");
-		goto err;
+		goto err_phy_exit;
 	}
 
 	ret = reset_control_deassert(hibrst);
 	if (ret < 0) {
 		dev_err(dev, "Failed to release hibernation reset\n");
-		goto err;
+		goto err_phy_exit;
 	}
 
 	ret = phy_power_on(priv_data->usb3_phy);
-	if (ret < 0) {
-		phy_exit(priv_data->usb3_phy);
-		goto err;
-	}
+	if (ret < 0)
+		goto err_phy_exit;
 
 	/* ulpi reset via gpio-modepin or gpio-framework driver */
 	reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(reset_gpio)) {
-		return dev_err_probe(dev, PTR_ERR(reset_gpio),
-				     "Failed to request reset GPIO\n");
+		ret = PTR_ERR(reset_gpio);
+		goto err_phy_power_off;
 	}
 
 	if (reset_gpio) {
@@ -237,6 +233,13 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
 	}
 
 	dwc3_xlnx_set_coherency(priv_data, XLNX_USB_TRAFFIC_ROUTE_CONFIG);
+
+	return 0;
+
+err_phy_power_off:
+	phy_power_off(priv_data->usb3_phy);
+err_phy_exit:
+	phy_exit(priv_data->usb3_phy);
 err:
 	return ret;
 }