From: <gregkh@linuxfoundation.org>
To: dhowells@redhat.com,davem@davemloft.net,edumazet@google.com,horms@kernel.org,jaltman@auristor.com,kuba@kernel.org,marc.dionne@auristor.com,michael.bommarito@gmail.com,pabeni@redhat.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] rxrpc: Fix the ACK parser to extract the SACK table for" failed to apply to 6.6-stable tree
Date: Mon, 15 Jun 2026 17:43:43 +0200 [thread overview]
Message-ID: <2026061543-superior-passerby-d597@gregkh> (raw)
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 333b6d5bb9f87827ac2639c737bf9613dbae7253
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026061543-superior-passerby-d597@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 333b6d5bb9f87827ac2639c737bf9613dbae7253 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Thu, 4 Jun 2026 12:46:00 +0100
Subject: [PATCH] rxrpc: Fix the ACK parser to extract the SACK table for
parsing
Fix modification of the received skbuff in rxrpc_input_soft_acks() and a
potential incorrect access of the buffer in a fragmented UDP packet (the
packet would probably have to be deliberately pre-generated as fragmented)
when AF_RXRPC tries to extract the contents of the SACK table by copying
out the contents of the SACK table into a buffer before attempting to parse
AF_RXRPC assumes that it can just call skb_condense() and then validly
access the SACK table from skb->data and that it will be a flat buffer -
but skb_condense() can silently fail to do anything under some
circumstances.
Note that whilst rxrpc_input_soft_acks() should be able to parse extended
ACKs, the rest of AF_RXRPC doesn't currently support that.
Further, there's then no need to call skb_condense() in rxrpc_input_ack(),
so don't.
Fixes: d57a3a151660 ("rxrpc: Save last ACK's SACK table rather than marking txbufs")
Reported-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://lore.kernel.org/r/20260513180907.2061972-1-michael.bommarito@gmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Eric Dumazet <edumazet@google.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
cc: stable@kernel.org
Link: https://patch.msgid.link/105362.1780573560@warthog.procyon.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c
index 24aceb183c2c..ce761466b02d 100644
--- a/net/rxrpc/input.c
+++ b/net/rxrpc/input.c
@@ -963,23 +963,34 @@ static void rxrpc_input_soft_acks(struct rxrpc_call *call,
struct rxrpc_skb_priv *sp = rxrpc_skb(skb);
struct rxrpc_txqueue *tq = call->tx_queue;
unsigned long extracted = ~0UL;
- unsigned int nr = 0;
+ unsigned int nr = 0, nsack;
rxrpc_seq_t seq = call->acks_hard_ack + 1;
rxrpc_seq_t lowest_nak = seq + sp->ack.nr_acks;
- u8 *acks = skb->data + sizeof(struct rxrpc_wire_header) + sizeof(struct rxrpc_ackpacket);
+ u8 sack[256] __aligned(sizeof(unsigned long));
+ u8 *acks = sack;
_enter("%x,%x,%u", tq->qbase, seq, sp->ack.nr_acks);
while (after(seq, tq->qbase + RXRPC_NR_TXQUEUE - 1))
tq = tq->next;
+ /* Extract an individual SACK table. A normal SACK table is up to 255
+ * bytes with 1 ACK flag per byte, but an extended SACK table can be up
+ * to 256 bytes with up to 8 ACK/NACK flags per byte. The ACK flags go
+ * across all bit 0's then all bit 1's, then all bit 2's, ...
+ */
+ memset(sack, 0, sizeof(sack));
+ nsack = umin(sp->ack.nr_acks, 256);
+ if (skb_copy_bits(skb,
+ sizeof(struct rxrpc_wire_header) + sizeof(struct rxrpc_ackpacket),
+ sack, nsack) < 0)
+ return;
+
for (unsigned int i = 0; i < sp->ack.nr_acks; i++) {
/* Decant ACKs until we hit a txqueue boundary. */
+ if ((i & 255) == 0)
+ acks = sack;
shiftr_adv_rotr(acks, extracted);
- if (i == 256) {
- acks -= i;
- i = 0;
- }
seq++;
nr++;
if ((seq & RXRPC_TXQ_MASK) != 0)
@@ -1117,9 +1128,6 @@ static void rxrpc_input_ack(struct rxrpc_call *call, struct sk_buff *skb)
skb_copy_bits(skb, ioffset, &trailer, sizeof(trailer)) < 0)
return rxrpc_proto_abort(call, 0, rxrpc_badmsg_short_ack_trailer);
- if (nr_acks > 0)
- skb_condense(skb);
-
call->acks_latest_ts = ktime_get_real();
call->acks_hard_ack = hard_ack;
call->acks_prev_seq = prev_pkt;
next reply other threads:[~2026-06-15 15:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-15 15:43 gregkh [this message]
2026-06-17 18:04 ` [PATCH 6.6.y] rxrpc: Fix the ACK parser to extract the SACK table for parsing Sasha Levin
2026-06-17 20:27 ` Jakub Kicinski
2026-06-17 21:52 ` Sasha Levin
2026-06-17 22:05 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026061543-superior-passerby-d597@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=davem@davemloft.net \
--cc=dhowells@redhat.com \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=jaltman@auristor.com \
--cc=kuba@kernel.org \
--cc=marc.dionne@auristor.com \
--cc=michael.bommarito@gmail.com \
--cc=pabeni@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox