FAILED: patch "[PATCH] serial: qcom_geni: Fix RX DMA stall when SE_DMA_RX_LEN_IN is" failed to apply to 6.6-stable tree

[<gregkh@linuxfoundation.org>]

The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x b93062b6d8a1b2d9bad235cac25558a909819026
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026062523-sulfite-banking-76d6@gregkh' --subject-prefix 'PATCH 6.6.y' 'HEAD^..'

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From b93062b6d8a1b2d9bad235cac25558a909819026 Mon Sep 17 00:00:00 2001
From: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Date: Thu, 28 May 2026 22:48:07 +0530
Subject: [PATCH] serial: qcom_geni: Fix RX DMA stall when SE_DMA_RX_LEN_IN is
 zero

In qcom_geni_serial_handle_rx_dma(), geni_se_rx_dma_unprep() clears
port->rx_dma_addr before SE_DMA_RX_LEN_IN is read. If the register is zero,
for example when the RX stale counter fires on an idle line, the handler
returns without calling geni_se_rx_dma_prep().

The next RX DMA interrupt then hits the !port->rx_dma_addr guard and
returns immediately, so the RX DMA buffer is never rearmed and later input
is lost.

Keep the handler on the rearm path when rx_in is zero. Warn about the
unexpected zero-length DMA completion, skip received-data handling, and
always call geni_se_rx_dma_prep().

Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Cc: stable@vger.kernel.org
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Link: https://patch.msgid.link/20260528-serial-rx-0-byte-fix-v2-1-b4195cfe342f@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index d81b539cff7f..7ead87b4eb65 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -905,12 +905,9 @@ static void qcom_geni_serial_handle_rx_dma(struct uart_port *uport, bool drop)
 	port->rx_dma_addr = 0;
 
 	rx_in = readl(uport->membase + SE_DMA_RX_LEN_IN);
-	if (!rx_in) {
-		dev_warn(uport->dev, "serial engine reports 0 RX bytes in!\n");
-		return;
-	}
-
-	if (!drop)
+	if (!rx_in)
+		dev_warn_ratelimited(uport->dev, "serial engine reports 0 RX bytes in!\n");
+	else if (!drop)
 		handle_rx_uart(uport, rx_in);
 
 	ret = geni_se_rx_dma_prep(&port->se, port->rx_buf,