From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,vbabka@kernel.org,usama.anjum@arm.com,surenb@google.com,stable@vger.kernel.org,shuah@kernel.org,rppt@kernel.org,mhocko@suse.com,ljs@kernel.org,liam@infradead.org,david@kernel.org,zenghui.yu@linux.dev,akpm@linux-foundation.org
Subject: + selftests-mm-pagemap_ioctl-use-the-correct-page-size-for-transact_test.patch added to mm-hotfixes-unstable branch
Date: Sun, 28 Jun 2026 11:13:37 -0700 [thread overview]
Message-ID: <20260628181341.003401F000E9@smtp.kernel.org> (raw)
The patch titled
Subject: selftests/mm: pagemap_ioctl: use the correct page size for transact_test()
has been added to the -mm mm-hotfixes-unstable branch. Its filename is
selftests-mm-pagemap_ioctl-use-the-correct-page-size-for-transact_test.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/selftests-mm-pagemap_ioctl-use-the-correct-page-size-for-transact_test.patch
This patch will later appear in the mm-hotfixes-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via various
branches at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there most days
------------------------------------------------------
From: Zenghui Yu <zenghui.yu@linux.dev>
Subject: selftests/mm: pagemap_ioctl: use the correct page size for transact_test()
Date: Sun, 28 Jun 2026 18:11:18 +0800
There are several places in transact_test() where we use the hardcoded
0x1000 (4k) as page size, which is not always correct for architectures
supporting multiple page sizes.
Switch to use the correct page size. Otherwise ./ksft_pagemap.sh on a
16k-page-size arm64 box fails with
$ ./ksft_pagemap.sh
[...]
# ok 96 mprotect_tests Both pages written after remap and mprotect
# ok 97 mprotect_tests Clear and make the pages written
# Bail out! ioctl failed
# # Planned tests != run tests (117 != 97)
# # Totals: pass:97 fail:0 xfail:0 xpass:0 skip:0 error:0
# [FAIL]
not ok 1 pagemap_ioctl # exit=1
# SUMMARY: PASS=0 SKIP=0 FAIL=1
1..1
Link: https://lore.kernel.org/20260628101118.35861-1-zenghui.yu@linux.dev
Fixes: 46fd75d4a3c9 ("selftests: mm: add pagemap ioctl tests")
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Cc: Muhammad Usama Anjum <usama.anjum@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Zenghui Yu <zenghui.yu@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
tools/testing/selftests/mm/pagemap_ioctl.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/tools/testing/selftests/mm/pagemap_ioctl.c~selftests-mm-pagemap_ioctl-use-the-correct-page-size-for-transact_test
+++ a/tools/testing/selftests/mm/pagemap_ioctl.c
@@ -1368,7 +1368,7 @@ void *thread_proc(void *mem)
ksft_exit_fail_msg("pthread_barrier_wait\n");
for (i = 0; i < access_per_thread; ++i)
- __atomic_add_fetch(m + i * (0x1000 / sizeof(*m)), 1, __ATOMIC_SEQ_CST);
+ __atomic_add_fetch(m + i * (page_size / sizeof(*m)), 1, __ATOMIC_SEQ_CST);
ret = pthread_barrier_wait(&end_barrier);
if (ret && ret != PTHREAD_BARRIER_SERIAL_THREAD)
@@ -1403,15 +1403,15 @@ static void transact_test(int page_size)
if (pthread_barrier_init(&end_barrier, NULL, nthreads + 1))
ksft_exit_fail_msg("pthread_barrier_init\n");
- mem = mmap(NULL, 0x1000 * nthreads * pages_per_thread, PROT_READ | PROT_WRITE,
+ mem = mmap(NULL, page_size * nthreads * pages_per_thread, PROT_READ | PROT_WRITE,
MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
if (mem == MAP_FAILED)
ksft_exit_fail_msg("Error mmap %s.\n", strerror(errno));
- wp_init(mem, 0x1000 * nthreads * pages_per_thread);
- wp_addr_range(mem, 0x1000 * nthreads * pages_per_thread);
+ wp_init(mem, page_size * nthreads * pages_per_thread);
+ wp_addr_range(mem, page_size * nthreads * pages_per_thread);
- memset(mem, 0, 0x1000 * nthreads * pages_per_thread);
+ memset(mem, 0, page_size * nthreads * pages_per_thread);
count = get_dirty_pages_reset(mem, nthreads * pages_per_thread, 1, page_size);
ksft_test_result(count > 0, "%s count %u\n", __func__, count);
@@ -1420,7 +1420,7 @@ static void transact_test(int page_size)
finish = 0;
for (i = 0; i < nthreads; ++i)
- pthread_create(&th, NULL, thread_proc, mem + 0x1000 * i * pages_per_thread);
+ pthread_create(&th, NULL, thread_proc, mem + page_size * i * pages_per_thread);
extra_pages = 0;
for (i = 0; i < iter_count; ++i) {
_
Patches currently in -mm which might be from zenghui.yu@linux.dev are
selftests-mm-pagemap_ioctl-use-the-correct-page-size-for-transact_test.patch
tools-mm-add-thp_swap_allocator_test-binary-to-gitignore.patch
docs-pagemap-fix-flags-location-member-name-and-sample-code.patch
reply other threads:[~2026-06-28 18:13 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260628181341.003401F000E9@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=david@kernel.org \
--cc=liam@infradead.org \
--cc=ljs@kernel.org \
--cc=mhocko@suse.com \
--cc=mm-commits@vger.kernel.org \
--cc=rppt@kernel.org \
--cc=shuah@kernel.org \
--cc=stable@vger.kernel.org \
--cc=surenb@google.com \
--cc=usama.anjum@arm.com \
--cc=vbabka@kernel.org \
--cc=zenghui.yu@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox