[PATCH 6.6.y 3/4] PCI: mediatek: Use generic MACRO for TPVPERL delay

[Sasha Levin <sashal@kernel.org>]

From: Christian Marangi <ansuelsmth@gmail.com>

[ Upstream commit 2d58bc777728bfc37aa35dce7b90e72296cceb9f ]

Use the generic PCI MACRO for TPVPERL delay to wait for clock and power
stabilization after PERST# Signal instead of the raw value of 100 ms.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251020111121.31779-5-ansuelsmth@gmail.com
Stable-dep-of: f865a57896bd ("PCI: mediatek: Fix IRQ domain leak when port fails to enable")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-mediatek.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
index 0e08e3104c347c..c0231c64e15e43 100644
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -711,12 +711,7 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
 	 */
 	writel(PCIE_LINKDOWN_RST_EN, port->base + PCIE_RST_CTRL);
 
-	/*
-	 * Described in PCIe CEM specification sections 2.2 (PERST# Signal) and
-	 * 2.2.1 (Initial Power-Up (G3 to S0)). The deassertion of PERST# should
-	 * be delayed 100ms (TPVPERL) for the power and clock to become stable.
-	 */
-	msleep(100);
+	msleep(PCIE_T_PVPERL_MS);
 
 	/* De-assert PHY, PE, PIPE, MAC and configuration reset	*/
 	val = readl(port->base + PCIE_RST_CTRL);
-- 
2.53.0